Benutzeranleitung / Produktwartung TDA-7587R des Produzenten Alpine
Zur Seite of 44
EN DE FR ES IT SE R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
Alpine CD Changers Give Y ou More! More m usical selections, more versatility , more con venience. An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S620 can be controlled from Alpine head units and deliv er excellent sound quality .
1 -EN Contents Operating Instructions W ARNING W ARNING .................................................. 2 CA UTION ................................................... 2 PRECA UTIONS ......................................... 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is of f. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN T ape Slack Check and make sure any slack in the tape is tak en up before inserting the tape into the unit. A loose tape can get caught in the mechanism and cause damage to the unit and the tape itself. T ighten the tape by inserting a pencil or a similar instrument into the spindle hole and turn until all the slack has been taken up.
5 -EN Basic Detaching the Fr ont Panel 1 Press and hold the PO WER b utton at least 3 seconds to turn off the power . 2 Press the (Release) button at left side until the front panel pops out.
6 -EN Basic About Demonstration This unit is equipped a Demonstration function. Soon after resetting the unit or after turning the unit on the first time, the demonstr ation star ts automatically . T o cancel the demonstration, ref er to “ Demonstration ” on page 10.
7 -EN Basic Adjusting Sour ce Signal Le vel If the diff erence in volume le vel between the CD play er and FM r adio is too great, adjust the FM signal le v el as f ollows . 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the f UP b utton repeatedly to select "FM-L V .
8 -EN Basic Dimmer Contr ol Set the DIMMER control to A UTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if y ou f eel the unit's backlighting is too bright at night. 1 Press and hold the SETUP button f or at least 3 seconds.
9 -EN Basic Sound (Beep) Guide Function This function will give audib le f eedbac k with varying tones depending upon the button pressed. 1 Press and hold the SETUP button f or at least 3 seconds. 2 Press the f UP button repeatedly to select "BEEP .
10 -EN Basic Setting the A UX Mode (V -Link) Y ou can input TV/video sound by connecting an optional Ai-NET/RCA Interf ace cab le (KCA-121B) or V ersatile Link T er minal (KCA-410C) to this component. 1 Press and hold the SETUP button f or at least 3 seconds.
11 -EN Basic 3 Press the TUNE button to turn on or off the DEMO mode. Each press toggles between "DEMO ON" and "DEMO OFF ." If no buttons are pressed 30 seconds after the DEMO mode is tur ned ON. The DEMO mode then begins. NO TE The initial setting at the factory is "DEMO ON.
12 -EN Basic Setting the Bass Forwar d The Bass F orward function shifts the lo w frequency's energy component to the front. This mov es the high energy , dynamic bass sound to the front sound stage. 1 Press the B-FWD b utton to activ ate the Bass F orward setting mode .
13 -EN Basic → P atter n1 → P attern2 → P attern3 → Displa y OFF Adjusting the b uilt-in Cr osso ver Y ou can change High P ass Filter , Low P ass Filter, Phase on this unit, so that you can create y our fa v ourite sound effects . 1 Press the X-O VER button repeatedly to select the desired parameter .
14 -EN Radio Manual T uning 1 Press the SOURCE button until a r adio frequency appears in the display . 2 Press the BAND button repeatedly until the desired radio band is displa y ed.
15 -EN Radio A utomatic Seek T uning 1 Press the SOURCE button until a r adio frequency appears in the display . 2 Press the BAND button repeatedly until the desired radio band is displa yed. Each press changes the band: → FM1 → FM2 → FM3 → MW → LW 3 Press the TUNE button to illuminate the DX and SEEK indicators in the display .
16 -EN Radio A utomatic Memor y of Station Presets 1 Press the SOURCE button to select the r adio mode. 2 Press the B AND b utton repeatedly until the desired radio band is displa yed. 3 Press and hold the A. ME b utton f or at least 2 seconds. The frequency on the displa y continues to change while the automatic memory is in progress.
17 -EN RDS Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio inf or mation system using the 57 kHz subcarrier of regular FM broadcast.
18 -EN RDS Recalling Preset RDS Stations 1 Press the " F " b utton. The indicator will illuminate. 2 Press the AF b utton to activate the RDS mode . The displa y shows "AF" when the RDS mode is activ ated. 3 Press the 1 thr ough 6 buttons in which y our desired RDS station is preset.
19 -EN RDS Receiving T raffic Inf ormation 1 Press the T .INFO button to activ ate the T r affic Inf or mation mode . T o cancel the T raffic information mode, press the T .INFO button again. 2 Press the g DN or f UP button to select your desired tr affic inf or mation station.
20 -EN RDS Receiving T raffic Information While Pla ying CD or Radio 1 Press the T .INFO b utton repeatedly until the T .INFO indicator appears in the displa y . 2 Press the g DN and f UP b uttons to select a traffic inf ormation station if necessar y .
21 -EN RDS 4 Press the P . PTY b utton to activate the PRIORITY PTY mode again. • T o change the progr amme categor y , perform the step 3. • T o disable the PRIORITY PTY function, press the P . PTY button. NO TE In the PRIORITY PTY function, unlike in the T .
22 -EN CD Opening and Closing the Mo vable displa y 1 Press the c b utton. The mov ab le displa y will open. T o close the mov able display , press the c button again. The mov ab le displa y will close. NO TES • Do not apply shock to the mo vable display when it is open as it may r esult in malfunction of the unit.
23 -EN CD Music Sensor (Skip) 1 Momentarily press the g DN button once during CD play to return to the beginning of the current trac k. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired trac k. Press the f UP button once to adv ance to the beginning of the next tr ack.
24 -EN CD Displa ying the Title/T e xt It is possib le to display the CD title if the title has been pre viously inputted. For details , see Titling Discs (see this page). T e xt inf ormation, such as the disc name and the trac k name, will be displa yed if pla ying a CD text compatible disc.
25 -EN CD 5 Repeat the steps 3 and 4 abov e to complete the titling. Pressing the MODE (Audio Control) knob after entering the eighth character , automatically stores the title into memor y .
26 -EN Cassette Cassette Player Operation (TDA-7588RB/TDA-7587R only) 2 Press the : / J b utton to pause the tape pla ybac k. The display sho ws "P A USE." Press again to resume the tape playbac k. 3 Press the c button to stop the tape pla y and eject the cassette.
27 -EN Cassette F ast Forwar d and Rewind 1 Press the g DN or f UP b utton during tape play to f ast rewind or f orward the tape respectively . The tape side indicator ( or ) b links and >> or << mov es indicating the direction of the tape.
28 -EN Changer Contr olling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer ma y be connected to the CD A-7876RB/CD A-7873R/TD A- 7588RB/TD A-7587R if it is Ai-NET compatib le .
29 -EN Changer F ast Forwar d and Backwar d 1 Press and hold the g DN or f UP button to quickly mo v e backw ard or f orward respectiv ely until you reach the desired portion. NO TE This featur e works only in the CD playback mode . Repeat Play on Single T rack or Entire Disc 1 Press the " F " (Function) b utton.
30 -EN Changer Disc Scan 1 Press the " F " b utton. The function indicator at the top side of the "F" button will turn off . 2 Press the SCAN button to pla y the first 10 seconds of each trac k on the disc. The displa y shows the disc n umber , "SCAN", and trac k number being pla y ed during scan play .
31 -EN Changer 6 Press and hold the TITLE b utton f or at least 3 seconds to record the title. NO TES • When the memory capacity for the disc titles is used up, the display shows "FULL D A T A" to indicate that no mor e title can be memorized.
32 -EN Remote Remote Contr ol Operation 8 g DN Button Radio mode: SEEK (DN) Button CD mode: Press the b utton to go bac k to the beginning of the current trac k. 9 f UP Button Radio mode: SEEK (UP) Button CD mode: Press the b utton to advance to the beginning of the next tr ack.
33 -EN Remote Battery Replacement CD A-7876RB/TDA-7588RB/TD A-7587R only Applicable battery: Use two “ AAA ” sized dr y batteries or equivalent. 1 Opening the batter y cov er Slide out the batter y cov er while firmly pressing the direction of arrow .
34 -EN Information CD CD Play er/Changer not functioning. • Out of operating temperature range +50 ˚ C (+120 ˚ F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playbac k sound is wavering. • Moisture condensation in the CD Module.
35 -EN Indication for CD Changer • Protecti ve circuit is acti vated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer . - Consult your Alpine dealer . Press the magazine eject button and pull out the magazine.
36 -EN REMO TE CONTR OL (CD A-7876RB/TD A-7588RB/TD A-7587R only) Battery T ype "AAA" sized dry battery Battery Quantity 2 Dimensions (W × H × D) 42 mm (1-21/32") × 121 mm (4-3/4") × 23 mm (15/16") W eight (without battery) 50 g (1.
37 -EN Installation and Connections Before installing or connecting the unit, please read the follo wing and pages 2 and 4 of this manual thoroughl y f or proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in f ire or product damage.
38 -EN Precautions • Be sure to disconnect the cable from the ( – ) battery post before installing your CD A-7876RB/CD A-7873R/ TDA-7588RB/TD A-7587R. This will reduce an y chance of damage to the unit in case of a short-circuit. • Be sure to connect the colour coded leads according to the diagram.
39 -EN Installation Caution When you install this unit in your car , do not remov e the Detachable Front Panel. If the Detachable Front Panel is remo v ed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Slide mounting slee ve from main unit (see "Remov al" on this page).
40 -EN Ai-NET NORM EQ/DIV / , + - : ( & % $ # " ! 9 6 5 4 3 1 2 7 ) 8 ~ ; ? ? > < ? = . Connection Installation and Connections ISO Antenna Plug Antenna T o vehicle phone T o amplifier .
41 -EN 1 Antenna Receptacle Connect to the supplied ISO antenna con v ertor plug. 2 Audio Interrupt In Lead (Pink/Blac k) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is receiv ed.
42 -EN.
Ein wichtiger Punkt beim Kauf des Geräts Alpine TDA-7587R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alpine TDA-7587R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alpine TDA-7587R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alpine TDA-7587R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alpine TDA-7587R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alpine TDA-7587R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alpine TDA-7587R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alpine TDA-7587R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alpine TDA-7587R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
