Benutzeranleitung / Produktwartung CVA-1003R des Produzenten Alpine
Zur Seite of 58
R EN DE FR ES IT SE ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CD changer for CV A-1003R. CD-W echsler für CV A-1003R. Changeur CD pour CV A-1003R. Cambiador de CD para CV A-1003R. Cambia CD per CV A-1003R. CD-växlare för CV A-1003R. CHA-S624 CHA-1214 CHM-S620 Y ou cannot connect to CV A-1003R. Il est impossible de se r accorder au CV A-1003R.
ENGLISH CD Pla yer/Changer Operation (Optional) Playing Optional CD player or Changer ......... 17 Music Sensor (Skip) ........................................ 17 Fast F orward and Backward ........................... 18 Repeat Play ..................
Other Useful Features Displaying the T itle/T ext ................................. 28 Setting the Bass Control ................................. 30 Setting the T reble Control ............................... 31 Switching Phase .......................
3 -EN W ARNING WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION AW A Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
4 -EN W ARNING Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen. This will restrict operation of these functions to times when the vehicle is park ed.
5 -EN Intr oduction Y ou can operate most of the functions of this unit with the monitor display open or closed. For operations with the monitor display c losed, refer to page 43.
6 -EN Basic Operation Detaching the Fr ont P anel 1 Press and hold the PWR (P ower) button f or more than 2 seconds to turn off the power . 2 Press the (Release) b utton at lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
7 -EN Basic Operation T urning P o wer On and Off Some of this unit's functions, cannot be perf ormed while the vehicle is in motion. Be sure to stop y our vehicle in a saf e location and apply the par king brake , bef ore attempting these operations.
8 -EN Basic Operation MUTE OPEN/CLOSE ANGLE 7 7 7 7 7 8 8 8 8 8 MODE/LOUD Lo wering the Monitor 1 Press the OPEN/CLOSE button. The unit will beep 3 times and low er the monitor automatically . NO TES • The CV A-1003R is a pr ecision de vice. W ith gentle handling, its unique capabilities can be enjoyed for a long time.
9 -EN Basic Operation Adjusting V olume/Balance (Between Left and Right)/F ader (Between Front and Rear) 1 Press the MODE button repeatedly to choose the desired mode.
10 -EN Radio Operation A.ME/TUNE BAND SOURCE g g g g g DN f f f f f UP Preset buttons (1 through 6) Manual T uning 1 Press the SOURCE b utton until a radio band and frequency appears in the displa y . 2 Press the B AND b utton repeatedly until the desired radio band is displa yed.
11 -EN Radio Operation Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset b uttons (1 through 6) f or at least 2 seconds until the station frequency (sub display) or preset n umber (monitor display) on the displa y blinks.
12 -EN RDS Operation Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio inf ormation system using the 57 kHz subcarr ier of regular FM broadcast.
13 -EN Recalling Preset RDS Stations 1 Press the FUNC button so that the FUNC indicator appears in the sub display . T o perform the same operation with the monitor displa y open, press the FUNC button only when the "FUNC" indicator lights red in the monitor display .
14 -EN Receiving T raffic Information 1 Press the T .INFO b utton to activ ate the T r affic Inf ormation mode. 2 Press the g DN or f UP b utton to select y our desired traffic inf ormation station. When a traffic inf ormation station is tuned in, the TP indicator lights up .
15 -EN Receiving T raffic Inf ormation While Playing CD or Radio 1 Press the T .INFO button repeatedly until the T .INFO indicator appears in the display .
16 -EN Displa ying Radio T e xt T ext messages from a r adio station can be scrolled in the displa y . 1 T une in a radio station that transmits te xt messages.
17 -EN CD Player/Changer Operation (Optional) : : : : : / J J J J J SOURCE g g g g g DN f f f f f UP Example of CD Mode Screen Volume Level Current Time Elapsed playing time Selected Source Pla ying Optional CD Play er or Changer When an optional Alpine CD play er or CD changer is connected, you can control it from the CV A-1003R.
18 -EN CD Player/Changer Operation (Optional) F ast Forwar d and Bac kwar d 1 Press and hold the g DN or f UP b utton to quickly mo v e backw ard or forw ard until y ou reach the desired section of the trac k. Repeat Pla y 1 Press the RPT (Repeat) button to pla y back repeatedly the trac k being pla yed.
19 -EN M.I.X. (Random Play) 1 Press the M.I.X. button in the pla y or pause mode. The trac ks on the disc will be pla yed bac k in a random sequence. After all the tracks on the disc hav e been pla yed bac k once, the play er will begin a new r andom sequence play until the M.
20 -EN : : : : : / J J J J J g g g g g DN f f f f f UP TITLE SOURCE Select buttons (1 through 6) CD Player/Changer Operation (Optional) 5 Repeat the steps 3 and 4 abov e to complete the titling. Pressing the : / J button after entering the 8th character , automatically stores the title into memor y .
21 -EN Erasing Disc Title 1 When the monitor displa y is open, press the TITLE button to select the disc titling mode . Then, press and hold the button f or at least 3 seconds. 2 Press and hold the - / J b utton for at least 2 seconds to activate the title scanning mode .
22 -EN CD Player/Changer Operation (Optional) 3 The CD Changer Selection mode remains activ e for 3 seconds after step 2 is perf or med. Press the B AND button until the desired CD Changer indicator appears on the displa y . NO TE If the selected CD Changer is not connected, the display will show "NO CHANGER.
23 -EN Playing Mini-Disc (MD) When an optional Alpine MD pla yer is connected to the CV A-1003R, you can control the pla yer from the CV A-1003R. (When the MD A-5051R is connected, MDs can be play ed bac k only .) 1 Press the SOURCE button until the "MD" appears in the display .
24 -EN F ast Forwar d and Bac kwar d 1 Press and hold the g DN or f UP b utton to quickly mo v e backw ard or forw ard until y ou reach the desired section of the trac k. When y ou reach the desired section, release the button. The play er star ts pla ying from that section.
25 -EN Still/P ause 1 Press the : / J button during D VD/video CD/CD play to freez e fr ame or pause. T o resume nor mal play , press the : / J b utton for a second time .
26 -EN DVD/Video CD/CD Player Operation (Optional) Repeat Pla y 1 Press the RPT b utton during play to repeatedly play the chapter/tr ack or title/disc being currently play ed. Each press changes the repeat pla y as f ollows: D VD: Video CD/CD: NO TES • The trac k/disc re peat modes cannot be used on video CDs with playback contr ol (PBC).
27 -EN Navigation System Operation (Optional) T urning on the Navigation Mode If an optional Alpine Navigation System is connected, the display sho ws the na vigation screen.
28 -EN CD changer mode: The monitor display is open. (display ed in the monitor displa y) CD changer mode: The monitor display is closed. (display ed in the sub monitor) Other Useful Features Displa ying the Title/T e xt It is possible to displa y the CD title if the title has been pre viously inputted.
29 -EN Other Useful Featur es MD mode: The monitor display is open. (display ed in the monitor displa y) MD mode: The monitor display is closed. (display ed in the sub monitor) NO TES • Some character s may not be displayed corr ectly with this device, depending on the character type .
30 -EN Other Useful Features Setting the Bass Contr ol Y ou can change the Bass F requency emphasis to create your o wn tonal pref erence. 1 When the monitor displa y is open, press the bass engine button. Bass engine mode is displa yed in the monitor displa y .
31 -EN Other Useful Featur es Setting the T reble Contr ol Y ou can change the T reb le F requency emphasis to create your own tonal pref erence. 1 When the monitor displa y is open, press the bass engine button. Bass engine mode is display ed in the monitor displa y .
32 -EN Other Useful Features Switching Phase Bef ore s witching Phase, select the Subwoof er ON (ref er to "Subwoof er Control On and Off" on page 39). 1 Press the bass engine button to turn on the Bass engine mode. 2 Press the Preset 3 button to select Subw oof er Phase mode.
33 -EN Other Useful Featur es Illumination Contr ol 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds . The SETUP screen appears. 2 Press the Preset 1 button to activ ate the DISPLA Y setting mode. Press the Preset 1 button again to select DIMMER.
34 -EN Other Useful Features Adjusting Tint of Picture Tint adjustment can be made only in the navigation, D VD , A UX1 and A UX2 modes. Tint adjustment cannot be made if a Navigation system with the RGB f eature is connected. 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds.
35 -EN Other Useful Featur es CD T e xt/MD Title Scr oll Setting When connecting to Alpine's CD/MD pla yer or CD changer , the disc or track name recorded on the disc will scroll.This scrolling f eature is av ailab le only with te xt compatible CDs and MDs pre- recorded with title.
36 -EN Other Useful Features T urning Sound Guide Function On or Off The Sound Guide function will giv e audible f eedback with a beep sound when a b utton on the unit is pressed to ackno wledge the receipt of the signal from the button. 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds.
37 -EN Other Useful Featur es Displa ying Time 1 When the monitor displa y is closed, press the CLOCK button repeatedly until the cloc k time is display ed in the sub displa y . NO TES • Selecting an y tuner or CD function while in the clock priority mode will interrupt the time display momentarily .
38 -EN Other Useful Features g g g g g DN f f f f f UP Preset 3 SETUP Preset 5 Preset 6 Switching NTSC/P AL Setting 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds . The SETUP screen appears. 2 Press the Preset 3 button to activ ate the A UXILIARY setting mode.
39 -EN Other Useful Featur es Adjusting Sour ce Signal Levels If the difference in v olume lev el between the CD play er and FM radio is too g reat, adjust the FM signal le vel as f ollo ws. 1 When the monitor displa y is open, press and hold the SETUP button f or at least 2 seconds .
40 -EN Other Useful Features Interrupt Feature (MIX LEVEL) With an Alpine na vigation system connected to the CV A- 1003R, the voice guidance of the navigation system will be mixed with the r adio or CD/MD audio . Y ou can also adjust the v olume le vel of the v oice guidance .
41 -EN Other Useful Featur es 3 Press the g DN or f UP button to set ON/ OFF . Expand Box ON: When connecting the e xpansion bo x KCE-103V (not supplied), set to ON. Expand Box OFF: When not connecting the e xpansion bo x KCE-103V (not supplied), set to OFF .
42 -EN Other Useful Features NO TES • When A UX IN (A UX1 IN, A UX2 IN) and NA V .IN ar e set to ON, the A UX (A UX1, A UX2) and N A V . mode is displayed (r efer to "Setting the External Input" on page 38). • T o switc h the sound sour ce, pr ess the SOURCE button during SIMUL.
43 -EN Basic Operation T ur ning P ower On and Off ...................................... 7 Adjusting V olume/Balance (Betw een Left and Right)/F ader (Between F ront and Rear) ........... 9 T ur ning Loudness On and Off ..............................
44 -EN Information In Case of Difficulty If y ou encounter a prob lem, please re vie w the items in the f ollowing chec klist. This guide will help y ou isolate the prob lem if the unit is at fault. Otherwise , make sure the rest of y our system is properly connected or consult y our authorized Alpine dealer .
45 -EN Information Indication for CD Changer • Protectiv e circuit is acti vated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer . - Consult your Alpine dealer .
46 -EN Information Specifications CHASSIS SIZE W idth 178 mm (7") Height 50 mm (2") Depth 165 mm (6-1/2") NOSEPIECE SIZE W idth 170 mm (6 – 3/4") Height 46.2 mm (1-13/16") Depth 20.5 mm (13/16") NO TES • Due to continuous pr oduct improv ement, specifications and design ar e subject to chang e without notice.
47 -EN Installation and Connections Before installing or connecting the unit, please read the following and pa ges 3 and 4 of this manual thoroughl y f or proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in f ire or product damage.
48 -EN Installation Installing the Monitor • Location Before final installation, make sure the display will not hamper gear shifting when it is opened and closed in the chosen location. NO TE Install at an angle within 30 de gr ees from horizontal. 1 Slide mounting sleeve from main unit (see Removal Procedure below).
49 -EN Installation and Connections T o prevent e xternal noise from entering the audio system. • Locate the unit and route the leads at least 10 cm away from the car harness. • K eep the battery power leads as far a way from other leads as possible.
50 -EN Ai-NET NORM EQ/DIV + , - . ~ ) ( / : $ & < ; # 8 9 % 1 4 5 6 7 " ! 3 2 Installation and Connections Basic Connections Antenna ISO Antenna Plug T o remote input lead T o amplifier or.
51 -EN Installation and Connections 1 ISO Antenna Conv er tor Plug 2 Antenna Receptacle Connect to the supplied ISO antenna con vertor plug. 3 Audio Interrupt In Lead (Pink/Blac k) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting w hen a call is receiv ed.
52 -EN ! # # " 9 8 7 6 5 4 2 3 1 (NVE-N077P) Ai-NET NORM EQ/DIV " 8 5 % $ 4 Ai-NET NORM EQ/DIV Installation and Connections System Example 1: Refer also to Basic Connections.
53 -EN Installation and Connections 1 Rear/Subwoof er Output RCA Connectors RED is right and WHITE is left. 2 RCA Extension Cable (Sold Separetely) 3 RGB Cable (Included with Navigation) 4 System Switch When connecting an equalizer or di vider using Ai- NET feature, place this switch in the EQ/DIV position.
54 -EN ) ! " #$ % &( ~ 9 8 7 6 6 5 4 2 , - . / 2 + 2 3 1 (TME-M750) (NVE-N077P) Ai-NET NORM EQ/DIV ON OFF ∗∗ System Example 2 (connecting to KCE-103V (Optional) ): Refer also to Basic Connections.
55 -EN 1 Rear/Subwoofer Output RCA Connectors RED is right and WHITE is left. 2 RCA Extension Cable (Sold Separetely) 3 Ai-NET Connector Connect this to the output or input connector of other product equipped with Ai-NET .
56 -EN.
Ein wichtiger Punkt beim Kauf des Geräts Alpine CVA-1003R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alpine CVA-1003R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alpine CVA-1003R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alpine CVA-1003R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alpine CVA-1003R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alpine CVA-1003R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alpine CVA-1003R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alpine CVA-1003R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alpine CVA-1003R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
