Benutzeranleitung / Produktwartung CDA-9847 des Produzenten Alpine
Zur Seite of 34
EN FR ES ES IT SE R CDA-9847 Designed by ALPINE Japan Printed in China (Y) 68-00493Z94-A MP3/WMA CD Receiver ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC.
1 -EN ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 3 CA UTION ................................................... 3 PRECA UTIONS ......................................... 3 Getting Star ted T urning Po wer On and Off .
2 -EN SA T Radio Receiver (Optional) Recei ving Channels with the SA T Radio Receiver (Optional) ................... 18 Checking the SA T Radio ID Number ............. 19 Storing Channel Presets .................................. 19 Recei ving Stored Channels .
3 -EN W ARNING W ARNING This symbol means important instructions. F ailure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
4 -EN Installation Location Make sure the CD A-9847 will not be installed in a location subjected to: • Direct sun and heat • High humidity and water • Excessiv e dust • Excessiv e vibrations Correct Handling Do not drop the disc while handling.
5 -EN On handling Compact Discs (CD/CD-R/CD-RW) • Do not touch the surface. • Do not expose the disc to direct sunlight. • Do not aff ix stickers or labels. • Clean the disc when it is dusty . • Make sure that there are no bumps around the disc.
6 -EN Getting Started Controllable with Remote Contr ol This unit can be controlled with an optional Alpine remote control. For details , consult your Alpine dealer .
7 -EN Detaching and Attaching the Front Panel Detaching 1 T urn off the unit power . 2 Press (Release) at the lower left side until the front panel pops out. 3 Grasp the left side of the fr ont panel and pull it out. • The fr ont panel may become hot in normal usage (especially the connector terminals on the back of the fr ont panel.
8 -EN Listening to Radio 1 Press SOURCE/POWER until a radio frequency appears in the displa y . 2 Press BAND repeatedly until the desired radio band is display ed.
9 -EN CD/MP3/WMA Playback 1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically . When a disc is already inserted, press SOURCE/PO WER to switch to the CD mode. The mode will change every time the button is pressed.
10 -EN M.I.X. (Random Play) Press 5 ( ) in the play or pause mode. The tracks (files) on the disc will be played back in random sequence. T o cancel M.I.X. play , press 5 ( ) again. CD mode : ↓ M.I.X. : T rac k are played bac k in random sequence . ↓ M.
11 -EN About MP3/WMA CA UTION Except for private use , duplicating audio data (including MP3/ WMA data) or distrib uting, transferring , or copying it, whether for fr ee or for a fee, without permission of the copyright holder is strictly pr ohibited by the Copyright Act and by international tr eaty .
12 -EN Producing MP3/WMA discs MP3/WMA files are pr epared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders). However , the maximum number of folders is 255. Media supported The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.
13 -EN SOURCE/ PO WER g f BAND Rotary encoder CENTER f ← → Setting the Bass Band width (Q-F actor) Press BAND to select the desired bass Band Width. 1 → 2 → 3 → 4 (Narrow) ← ........... → (Wide) Changes the bass boost band width to wide or narr ow.
14 -EN Other Functions Displaying the T itle/T ext It is possible to display the CD title if the title has been pre viously inputted (“T itling Discs” page 15). T ext information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc.
15 -EN About the indicator display When displa ying Title/T ext, the f ollowing indicators are lit according to the mode. ∗1 T ag information ∗2 When SA T Radio mode is activated. About “Title” and “T ext” Title: With this device, it is possible to input the CD and radio station name (page 15).
16 -EN Erasing Disc T itle/Station T itle 1 Press TITLE to select the Title Display . Then, press again and hold f or at least 2 seconds. 2 Press and hold - / J for at least 2 seconds. The title in the display will blink. 3 Press g or f repeatedly until the title y ou want to erase is display ed.
17 -EN Setting the Subwoof er System SUBW SYS1 (Initial setting) / SUBW SYS2 Select either SYS1 or SYS2 for the desired subwoofer ef fect. SUBW SYS1 : Subwoofer effect is dependent on the main volume setting. SUBW SYS2 : Subwoofer effect is independent of the main volume setting.
18 -EN POWER IC ON : The speakers ar e driven by the built-in amplifier . • No sound is pr oduced by the system when the power output is set to OFF .
19 -EN • When using the optional r emote control (R UE-4190), a Channel can be dir ectly called up with the numeric keypad of the r emote contr ol. 1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote contr ol.
20 -EN Quick Search Function Y ou can search for all Channels. 1 Press and hold SEARCH/Q.S. for at least 2 seconds in XM or SIRIUS mode to activate Quic k Search mode. 2 T urn the Rotary encoder to select the desired Channel within 10 seconds. The selected Channel is received.
21 -EN T o search f or an album of the selected artist 1 After selecting the artist in step 2 *2 , press SEARCH/Q.S to change to the album search mode of the selected artist. 2 *3 T urn the Rotar y encoder within 10 seconds to select an album. 3 Press the Rotary encoder to play back all songs of the selected album.
22 -EN Repeat Play Only Repeat One is av ailable for the iPod. Repeat One: A single song is repeatedly played back. 1 Press 4 ( ). The file will be played repeatedly . RPT ←→ (off) (Repeat One) 2 T o cancel repeat play , select (off) with the abo ve procedure.
23 -EN Changer (Optional) Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. W ith a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit.
24 -EN Information In Case of Difficulty If you encounter a problem, please turn the power of f, then on again. If the unit is still not functioning normally , please revie w the items in the following checklist. This guide will help you isolate the problem if the unit is at fault.
25 -EN Indication for CD Pla yer HI TEMP • Protectiv e circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. NO DISC • No CD is inserted. - Insert a CD. • Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
26 -EN Indication f or SA T Receiver Mode ANTENNA • The XM or SIRIUS antenna is not connected to the XM or SIRIUS radio module. - Check whether the XM or SIRIUS antenna cable is attached securely to the XM or SIRIUS radio module. UPD A TING CALL 888-539- SIRIUS T O SUBSCRIBE • Radio is being updated with latest encryption code.
27 -EN Specifications FM TUNER SECTION T uning Range 87.7 – 107.9 MHz ** Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.
28 -EN Installation and Connections Caution HA VE THE WIRING AND INST ALLA TION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. T o ensure safety , alw ays contact the dealer where you purchased this product to hav e the work done.
29 -EN Installation 1 Remov e the Detachable F ront P anel (refer to page 7). Slide mounting slee ve from main unit. (see “Remo val” on this page). Slide the mounting slee ve into the dashboard. NO TE Please examine the installation. Make certain that no e xternal pr essure is applied to either the top of the unit or the r emovable nosepiece.
30 -EN Connections Subwoof ers T o amplifier or equaliz er Ignition Ke y T o vehicle phone T o the instrument cluster illumination lead Amplifier Amplifier Amplifier Antenna T o power antenna Battery .
31 -EN + Subwoof er RCA Connectors RED is right and WHITE is left. , Fuse Holder (10A) - Ai-NET Connector Connect this to the output or input connector of other product (CD Changer , Equalizer, iPod adapter ,* etc.
LIMITED W ARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
CHM-S630 CHA-S634 • CD changer for CD A-9847. • Changeur CD pour CD A-9847. • Cambiador de CD para CD A-9847. Alpine CD Changers Give Y ou More! More musical selections, more versatility , more convenience. The CHA-S634 is a high-performance 6-disc changer with a ne w M DA C, CD-R/R W PLA Y B A CK, MP3 PLA Y B A CK and CD TEXT .
Ein wichtiger Punkt beim Kauf des Geräts Alpine CDA-9847 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alpine CDA-9847 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alpine CDA-9847 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alpine CDA-9847 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alpine CDA-9847 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alpine CDA-9847 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alpine CDA-9847 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alpine CDA-9847. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alpine CDA-9847 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
