Benutzeranleitung / Produktwartung VT02 des Produzenten Fluke
Zur Seite of 40
October 2012, Rev.2, 4/14 © 2012-2014 Fluke Corporation. Al l rights reserved. Specifications are subject to change withou t notice. All product names are trademarks of their respectiv e companies.
LIMITED WARRANTY A ND LIMITATION OF LIA BILITY This Fluke product will be free from defects in material and workmanship for two years from the date of pur chase. This warranty does not cover fuses, disposable batteries, or damage from accid ent, neglect, misuse, alteration, contamination, or abnormal conditions of ope ration or handling.
i Table of Contents Title Page Introducti on ................................................................................ 1 How to Contac t Fluke ................................................................. 2 Safety Informa tion .............
VT02, VT04A, VT04 Users Manual ii.
iii List of Tables Table Title Page 1. Symbols ..................................................................................... 3 2. Packing List ................................................................................ 4 3. Features .....
VT02, VT04A, VT04 Users Manual iv.
v List of Figures Figure Title Page 1. Start-Up Screen and Status Indi cator ......................................... 5 2. Rechargeable Batter y ................................................................. 6 3. Blend Op tions ...................
VT02, VT04A, VT04 Users Manual vi.
1 Introduction The VT Series (the Product) are Visual IR T hermometers that combine a center-point temperature measurement wi th a blended digital imag e and heat map overlay. The thermal image remov e s the time necessary for component- by-component measurement associat ed wi th a traditional spot thermomet er (radiometer).
VT02, VT04A, VT04 Users Manual 2 How to Contact Fluke To contact Fluke, use one of these telephone numb ers: • USA: 1-800-760-45 23 • Canada: 1-800-36-FLUKE (1- 800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714- 3114 • Singapore: + 65-6799-5566 • Anywhere in the worl d: +1-425-446-5 500 Or, visit Fluke's website at www.
Visual IR Thermometer Safety Information 3 • Remove the batteries if the Product is not use d for an extended period of time, or if stored in te mperatures abov e 50 ° C. If the batteries are not remo ved, battery leakage can damage the Product. • Follow all batt ery care and cha rging instruc tions in this manual.
VT02, VT04A, VT04 Users Manual 4 Before You Start Table 2 is a list of all items included with the Product. Table 2. Packing List Description Part Number Model VT02 VT04A VT04 VT02 Visual IR Thermometer 4253599 • VT04A Visual IR Thermometer 4485211 • VT04 Visual IR Thermometer 4366444 • AA Alkaline Batteries (QTY.
Visual IR Thermometer Power On and Off 5 Power On and Off To turn on the Product, push and hold for 2 seconds. A start-up screen shows on the display and an i ndicator bar shows the status, see Figure 1. The indicator bar increases on power up and de creases on power down.
VT02, VT04A, VT04 Users Manual 6 Rechargeable Battery The VT04 has a rechar geable Li-ion batter y. Note New batteries are not fully charged. Tw o to ten normal charging/discharging cycles may be required before the battery charges to its maximum capacity.
Visual IR Thermometer Features and Controls 7 Features and Controls Table 3 is a list of the Product features with the location of each control. Table 3.
VT02, VT04A, VT04 Users Manual 8 Button Operation Two functions are accessed directly from the buttons: Blending/Ca pture and Save. The arrow buttons are used for menu navigation. Image Blending Image blending makes it easier to underst an d infrared heat maps through the use of an aligned visible imag e and infr ared heat map.
Visual IR Thermometer Button Operation 9 Visual Image Alignment Control The heat map overlay and th e visual camera are positione d vertically in the VT Series. This vertical parallax will ch ange with distance to your ob ject. To correct the parallax for a near or far distance, you have a visual ima ge alignment control.
VT02, VT04A, VT04 Users Manual 10 Capture and Save The Product saves up to 10,000 images/GB on the micro SD memor y card. Note Use the micro SD memory card to dow nload images from the Product to a PC. The micro-USB cable is for battery charging only.
Visual IR Thermometer Menu Functions 11 Menu Functions To open the display me nu, push . The menu has options for memory, emissivity, background temperature, hot and cold markers, date, and time. For the VT04A and VT04, menu o ptions that are set by you are saved in memor y and remain as set each time you turn off and turn on the Pro duct.
VT02, VT04A, VT04 Users Manual 12 Push to select the menu option and edit the value. T he / buttons change the value of the menu selectio n. After adjustments are made, push to accept a new value and exit the edit mode. See Figure 7. D / C to highlight to select (color inverts) F D / C change values F accept new value hak08.
Visual IR Thermometer Menu Functions 13 Table 4 is a list of the menu ic ons and their descriptions. Table 4. Menu Ic ons Icon Description VT02 VT04A VT04 View Stored Images • • Emissivity • •.
VT02, VT04A, VT04 Users Manual 14 Review Memory The Memory mode lets you view the stored images. You can also d elete images in this menu. 1. Highlight the Memory icon. 2. Push to open the Memory mode. 3. Push / to scroll through and revie w the stored images.
Visual IR Thermometer Menu Functions 15 Temperature Measurement All objects radiate infrared energy. T he quan tity of energy radiated is bas ed on the actual surface temperature and the s urface emissivity of the object.
VT02, VT04A, VT04 Users Manual 16 Table 5 shows the distance to area ratio (D:S) for measurem ent accuracy. Table 5. Temperature M easurement Accuracy AB C AB C D S For best temperature accuracy , strive for a full field of view . hak09.eps Model D:S A B C VT02 6:1 38 mm @ 230 mm 60mm @ 360 mm 100 mm @ 600 mm 1.
Visual IR Thermometer Menu Functions 17 Figure 8 shows how the D:S ratio compares on-scree n for both models. The higher the ratio, the smaller the target area n eeds to be for an accurate measurement. Figure 9 illustrates the detection ab ility. VT02 D:S = 6:1 VT04A/VT04 D:S = 9:1 hak21.
VT02, VT04A, VT04 Users Manual 18 Color Palette The Palette menu changes the false-colo r pr esentation of t he infrared images that are on the display or captured. A va riety of palettes are available. Some palettes are more suitable for specific applic ations and are set as required.
Visual IR Thermometer Menu Functions 19 Temperature Units The Product shows temperatures in °C or °F. Date and Time In the Clock menu the user can set the time and the date. Push to select the Clock. hak12.jpg 1. Push again to select the date type.
VT02, VT04A, VT04 Users Manual 20 High/Low Temperature Alarm (VT04A, VT04) High temperature and lo w temperature alarms are avail able on the VT04A and VT04. The temperature thresh old is set for either the high or lo w alarm. When an alarm is set, you can quickly scan the sce ne and find objects that are above or below the threshold.
Visual IR Thermometer Menu Functions 21 Time-Lapse Image Capture (VT04A, VT04) The VT04A and VT 04 have a time-lapse feat ure that monito rs equipment with captured images at a user-set time in terval. The user selects from a menu of preset values for both the time interval and durati on.
VT02, VT04A, VT04 Users Manual 22 Auto-Monitor Alarm (VT04A, VT04) The Auto-Monitor Alarm feature is sim ilar to the hi gh/low temperature alarm feature.
Visual IR Thermometer Menu Functions 23 To prevent too many images being saved, the re is a 10-minute delay bet ween saved images. The dela y applies only when a temperature th reshold is breached and stays breach ed. When t he scene temperature goes below (or above for low alarm) the threshold temperatu re, the delay is reset to zero.
VT02, VT04A, VT04 Users Manual 24 Auto Off (VT04A, VT04) The Auto Off feature turns off the Prod uct after a selected time interval. The default setting is 10 minutes and is user-s electable as 5, 10, 15, or 20 minu tes of inactivity. LCD Brightness (VT04A, VT04) The brightness of the LCD backlight h as a low, medium, and high setting.
Visual IR Thermometer Measurements 25 Measurements The temperature measuremen t of the center area is shown at the top of the display. The emissivity setting also sh ows at the top of the display. When the hot and cold markers are turned on, move the Product until the hot or cold spot coincides with the middle measurement area.
VT02, VT04A, VT04 Users Manual 26 Maintenance Maintenance is not necessar y for this Product. Warning To prevent poss ible electrical shoc k, fire, or personal in jury, use only specified replacemen t parts.
Visual IR Thermometer Maintenance 27 Battery Care Warning To prevent pers onal injury and for safe operation and maintenance of the Product: • Batteries contain haza rdous chemicals tha t can cause burns or explode. If exposure to chemicals o ccurs, clean with w ater and get medical aid.
VT02, VT04A, VT04 Users Manual 28 VT02, VT04A To replace the batteries: 1. Remove the battery cover from the handle. 2. Remove the discharged batteries. Note Do not charge the batteries include d with the VT02 and VT04A models. 3. Install new batteries with the correct polarity, see Figur e 12.
Visual IR Thermometer Specifications 29 VT04 To get the best performance from the Li-Ion battery, use these guidel ines: • Do not store the Product on the charger for more than 24 hours as reduced battery life may result. • Charge the Product for a 2-hour mi nimum at least every six months to maximize battery life.
VT02, VT04A, VT04 Users Manual 30 Image Presentation Palettes VT02 ................................................................ Ironbow, Rainbow, Rainbow High Contrast, Grayscale (white hot) and Grayscale (black hot) VT04A, VT04 ..................
Visual IR Thermometer Specifications 31 Controls and Adjustments VT02 VT04A VT04 Select Color Palette • • • User-Selectable Temperature Scale (°F/°C) • • • Time/Date Set • • • Emis.
VT02, VT04A, VT04 Users Manual 32 Batteries Type VT04 ................................................................ Li-ion Rechargeable, 3.6 V, 2250 mAh, 8.1 Wh VT02, VT04A ................................................... 4 AA, LR6 1.5 V Battery Life .
Ein wichtiger Punkt beim Kauf des Geräts Fluke VT02 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fluke VT02 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fluke VT02 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fluke VT02 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fluke VT02 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fluke VT02 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fluke VT02 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fluke VT02. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fluke VT02 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
