Benutzeranleitung / Produktwartung K7112 des Produzenten Fisher-Price
Zur Seite of 32
• Please read this manual and • Please read this manual and sav e it with your original sav e it with your or iginal sales receipt. sales receipt. • T ools needed for assembly: Phillips • T ools needed f or assembly: Phillips Screw driver and Safety Scissors Screw driver and Saf ety Scissors (both not included).
2 2 K7112pr -0920 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Parts . . . . . . . . . . . . . . . .
K7112pr -0920 3 K7112 p r -092 0 3 RIDING HAZARD • Pr ev ent Injuries and Deaths • Direct Adult Supervision Requir ed. • Ne v er Ride at Night. • K eep Children Within S afe Riding Areas.
4 4 • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
K7112pr -0920 5 K7112 p r -092 0 5 12 Volt Orange Battery 12 Volt Charger Fasteners Shown Actual Size #8 x ¾" Screw - 51 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver . Do not over-tighten the screws.
6 6 P ARTS PICTURE 2 1 Vehicle 2 Front Grille 3 Brush Guard 4 Rear Clip 5 Rear Bumper 6 Rear Wheel - 2 7 Front Wheel - 2 8 Seat 9 Seat Bar 10 Rear Grille 11 Fender - 4 12 Side Mirror - 2 13 Steering W.
K7112pr -0920 7 K7112 p r -092 0 7 ELECTRICAL HAZARD Important Notes • Y our new batter y must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle.
8 8 Children can be harmed by small par ts, shar p edges and shar p points in the vehicle's unassembled st at e, or b y electr ical items . C ar e should be tak en in unpac king and assembl y of the vehicle . Children should not handle par ts, including the bat ter y , or help in assembl y of the vehicle .
K7112pr -0920 9 K7112 p r -092 0 9 • Fit the rear clip onto the rear end of the vehicle and over the rear bumper . • Make sure the tabs on each side of the rear clip fit into the sides of the vehicle. • “Snap” the sides of the rear bumper into the openings on each side of the rear clip.
10 1 0 7 • Fit the seat bar to the back of the seat. • Insert four screws through the seat bar and into the seat. Tighten the screws. Seat Seat Bar 6 Note: Make sure the fasteners on both short seat belts face each other . • Fit the folded end of each short seat belt down through the outer slots in the seat.
K7112pr -0920 11 K7112 p r -092 0 11 • Insert four screws through the seat bar and into the vehicle. Tighten the screws. 9 SIDE VIEW 10 • Insert a screw into the hole in the console between the seats. INSIDE VIEW • Insert the tabs on the front edge of the seat into the slots inside the vehicle.
12 12 13 • Fit the four fenders marked 1, 2, 3 and 4, to the vehicle, as shown. Hint: The fenders are designed to fit the vehicle one way . • Make sure the peg on the inside edge of each fender fits into the lower hole inside each wheel well. 1 2 3 4 14 • Fit three screws into the top of each fender and tighten.
K7112pr -0920 13 K7112 p r -092 0 13 17 • Fit the steering column cap onto the end of the steering column. Steering Column Cap • Insert a screw through the large opening in the steering column cap and the hole in the steering column. Tighten the screw .
14 14 Note: There are front and rear wheels. The rear wheels have a grooved hub while the front wheels do not. • Locate a front wheel. Place the front wheel onto the front axle with the “lug nuts” facing out. 22 Front Wheel "Lug Nuts" 21 • Fit a front axle cap onto the front axle post and hold it in place.
K7112pr -0920 15 K7112 p r -092 0 15 REAR BOTTOM VIEW • Slide the rear axle through the large opening near the rear of the vehicle, as shown. • Place a rear wheel onto the rear axle with the “lug nuts” facing out. • T urn the wheel until it “locks” in place.
16 1 6 • Align the tabs on a hubcap with the slots in a wheel. “Snap” a hubcap into the center of each wheel. • T urn the vehicle upright. 29 Hubcaps Hubcaps 31 • While pressing down on the steering wheel, grasp the steering column under the dash and pull it up as far as it will go.
K7112pr -0920 17 K7112 p r -092 0 17 • Insert a screw into the right side mirror and tighten. • Repeat this procedure to assemble the left side mirror . • Fit the steering wheel cap onto the center of the steering wheel. • Insert two screws into the steering wheel cap and tighten.
18 1 8 • Locate the simulated equalizer on the dash. • Loosen the screws in the simulated equalizer and remove it. • Insert four “C” (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. • Replace the simulated equalizer and tighten the screws.
K7112pr -0920 19 K7112 p r -092 0 19 • Before applying the labels, wipe the sur face of the vehicle with a clean, dr y cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle.
20 20 12 12 15 10 2 5 18 12 12 15 10 18 2 6 K7112pr -0920 (T3264 only) (T3264 only).
K7112pr -0920 21 K7112 p r -092 0 21 IMPORT ANT! Use only a Power Wheels ® 12 volt orange lead-acid rechargeable battery with built-in thermal fuse. Use of any other battery will damage your vehicle.
22 22 • Y our Power Wheels ® battery is a non-spillable, sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner . • Do not dispose of a lead-acid battery in a fire. The batter y may explode or leak. • Do not dispose of a lead-acid battery in your regular , household trash.
K7112pr -0920 23 K7112 p r -092 0 23 RIDING HAZARD • Pr event Injur ies and Deaths • Direct Adult Supervision Requir ed. • Nev er Ride at Night. • K eep Children Within S af e Riding Areas.
24 24 As assembled, your vehicle is ready to roll in low speed (2½ mph, maximum). After your child has mastered the basic skills of driving and understands the rules for safe driving, it’ s time to remove the high speed lock-out screw to allow the vehicle to operate in low or high speed .
K7112pr -0920 25 K7112 p r -092 0 25 • Check all screws regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather , the vehicle should be stored inside or under a protective cover .
26 26 Power/Volume • Press the power button to turn on or off. • T urn the volume dial to adjust to a comfortable listening level. Hint: The FM Radio will turn off automatically after several minutes of non-use. FM Radio • Press the scan button to find a station.
K7112pr -0920 27 K7112 p r -092 0 27 IMPORT ANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 .
28 28 PROBLEM POSSIBLE CAUSE SOLUTION V ehicle was running but suddenly st opped Loose wire or loose connect ors Check all wir es and connector s. Make sure the mot or harness connector is plugged int o the bat tery , and that there are no loose wires ar ound the motor s.
K7112pr -0920 29 K7112 p r -092 0 29 PROBLEM POSSIBLE CAUSE SOLUTION V ehicle r uns sluggishly Underchar ged bat tery Charge the bat tery . A ne w bat ter y should hav e been charged f or at least 1 8 hours bef ore using the vehicle f or the r st time.
30 30 PROBLEM POSSIBLE CAUSE SOLUTION Loud clacking or grinding noise from a mot or -gearbo x Brok en gears Contact y our local P ower Wheels ® authorized service center f or diagnosis and repair . Charger gets w arm dur ing use It is normal for some charger s to get warm during use and is not reason for concern.
K7112pr -0920 31 K7112 p r -092 0 31 Bumper -to-Bumper* Limited W arranty One year limited warranty from the date of purchase on the Power Wheels ® vehicle.
Or contact your local independently owned and operated Power Wheels ® Authorized Ser vice Center . For the location nearest you, visit us on-line at www .power wheels.com . Befor e first-time use, you must char ge the batter y 18 hours! Charge the batter y immediately after each use.
Ein wichtiger Punkt beim Kauf des Geräts Fisher-Price K7112 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fisher-Price K7112 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fisher-Price K7112 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fisher-Price K7112 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fisher-Price K7112 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fisher-Price K7112 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fisher-Price K7112 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fisher-Price K7112. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fisher-Price K7112 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
