Benutzeranleitung / Produktwartung 5900621 des Produzenten Ferris
Zur Seite of 57
5100798 Re vision 01 Re v . Date: 9/2006 TP 100-7306-01-45-F Ferris Industries 5375 Nor th Main Street Munnsville, NY 13409 800-933-6175 Model Number: Description 5901178 IS4500ZBL35, 35HP Zero-T urn .
W ARNING Engine exhaust fr om this product contains chemicals known, in certain quantities, to cause cancer , birth defects, or other reproductive harm. Thank y ou f or purchasing this quality-b uilt F erris product. W e’ re pleased that y ou’v e placed y our confidence in the F erris brand.
T able of Contents Safety Rules & Inf ormation ................................2 Identification Numbers .....................................11 Safety Decals .....................................................12 Safety Icons ....................
2 www .ferrisindustries.com Safety Safety Rules & Information Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manuf actured to meet or e xceed all industry standards for saf ety .
3 Safety Safety Rules & Information Slope Operation Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not ha v e adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollo v er .
4 www .ferrisindustries.com Safety Roll Bar Use K eep the roll bar in the raised position and f asten the seat belt. There is no roll ov er protection when the roll bar is down! Do not jump off if the mo wer tips (it is saf er to be secured by the seat belt with the roll bar raised.
5 Safety Safety Rules & Information Enclosed Areas Only operate this unit outdoors and aw a y from unv entilated areas such as inside garages or enclosed trailers . The engine emits poisonous carbon mono xide gas and prolonged e xposure in an enclosed area can result in serious injur y or death.
6 www .ferrisindustries.com Safety 2. Mow only in the da ylight or with good artificial light, keeping a wa y from holes and hidden hazards. 3. Be sure all drives are in neutral and parking brak e is engaged bef ore star ting engine. Only star t engine from the operator’ s position.
7 Safety Safety Rules & Information 23. Use care when approaching blind corners, shrubs, trees or other objects that ma y obscure vision. 24. T o reduce fire hazard, keep unit free of gr ass, leav es & e xcess oil. Do not stop or park ov er dry leav es , grass or comb ustib le materials.
8 www .ferrisindustries.com Safety Safety Rules & Information SER VICE AND MAINTENANCE T o a v oid per sonal injury or pr oper ty dama ge, use e xtreme care in handling gasoline . Gasoline is e xtremel y flammab le and the v apor s are e xplosive .
9 Safety Safety Rules & Information 27. Models equipped with an engine radiator : W ARNING: Stored energy device. T o prev ent serious bodily injur y from hot coolant or steam blo w-out, ne v er attempt to remov e the radiator cap while the engine is running.
10 www .ferrisindustries.com Safety INSPECT BUCKLE & LA TCH INSPECT WEBBING Safety Rules & Information W ARNING Failure to pr operly inspect and maintain the seat belt can cause serious injury or death.
11 Safety All Models CE Models S S A A M M P P L L E E When contacting your authorized dealer f or replacement parts, service, or information you MUST have these number s. Record your model/serial number and engine serial numbers on the space provided f or easy access .
12 SAFETY DECALS This unit has been designed and manuf actured to provide y ou with the saf ety and reliability you w ould e xpect from an industr y leader in outdoor pow er equipment manuf acturing.
13 Safety Safety Icons W arning: Read Operator’ s Manual. Read and understand the Operator’ s Manual before using this machine. Danger: Thro wn Objects. This machine is capable of throwing objects and debris. K eep bystanders a wa y . W arning: Remove Ke y Bef ore Servicing.
14 www .ferrisindustries.com Safety SAFETY INTERLOCK SYSTEM This unit is equipped with saf ety interlock s witches. These saf ety systems are present f or your saf ety , do not attempt to bypass saf ety s witches , and ne v er tamper with saf ety de vices.
15 Ground Speed Le ver s These le vers control the g round speed of the rider . The left le ver controls the left rear driv e wheel and the right controls the r ight rear drive wheel. Moving a le v er f orward increases the FOR W ARD speed of the associated wheel, and pulling back on a le ver increases the REVERSE speed.
16 www .ferrisindustries.com Controls PT O (P ower T ake Off) Switch The PT O s witch engages and disengages the mow er . Pull UP on the s witch to engage the mower , and push DO WN to disengage the mower . Throttle Contr ol Moving the throttle control fully f orw ard is FULL throttle position.
17 Operation GENERAL OPERA TING SAFETY Bef ore first time operation: • Be sure to read all inf ormation in the Safety and Operation sections bef ore attempting to operate this tractor and mow er . • Become f amiliar with all of the controls and how to stop the unit.
18 www .ferrisindustries.com Operation Operation PRIMING THE FUEL SYSTEM Diesel Model Only Priming the fuel system fills the fuel filters and remov es any air b ubb les from the fuel system. This must be perf ormed before the first use , after any fuel filter maintenance or if the fuel system is run dr y .
19 Operation ST AR TING THE ENGINE (Diesel Model) 1. While sitting in the operators seat, engage the parking brake and mak e sure the PT O s witch is disengaged and the ground speed control le v ers are lock ed in the neutral position. 2. Set the throttle to middle position (set throttle to FULL when star ting in cold weather) 3.
20 www .ferrisindustries.com Operation Figure 3. Hydraulic Release V alve Location A. Hydraulic Release V alve (Right-hand side shown) A DRIVING THE TRA CT OR 1. Sit in the seat and adjust the seat so that you can comf or tably reach all of the controls and see the instrument and gauge panels.
21 Operation Operation ZER O TURN DRIVING PRA CTICE The le ver controls of the Zero T urn r ider are responsive , and learning to gain a smooth and efficient control of the rider’ s f orward, re v erse , and turning movements will tak e some practice .
22 www .ferrisindustries.com Operation Operation AD V ANCED DRIVING Executing an End-Of-Ro w Zero T urn Y our Zero T urn Rider’ s unique ability to turn in place allows y ou to turn around at the end of a cutting row rather than ha ving to stop and Y -turn before starting a new row .
23 Operation Operation Figure 10. T railer W eight Recommendations A. Clevis Pin B. Clip W ARNING A V OID SERIOUS INJUR Y OR DEA TH FROM ROLL O VER: Keep r oll bar in the raised position and use seat belt. THERE IS NO ROLL O VER PRO TECTION WHEN THE ROLL B AR IS DO WN Lower the r oll bar only when necessary and NEVER remove it.
24 www .ferrisindustries.com Operation T all Grass Requires Incremental Cutting F or e xtremely tall grass , set the cutting height at maximum f or the first pass, and then reset it to the desired height and mow a second or third time . Don’t cov er the gr ass surf ace with a heavy la y er of clippings.
25 Operation When and How Often to Mo w The time of da y and condition of the grass g reatly aff ect the results you’ll get when mo wing. F or the best results, f ollo w these guidelines: 1. Mow when the g rass is between three and fiv e inches high.
26 www .ferrisindustries.com Operation Proper Mulc hing Mulching consists of a mower dec k which cuts and recuts clippings into tiny par ticles and which then blo ws them down INT O the lawn. These tiny par ticles decompose rapidly into b y-products your la wn can use.
27 NO TE: Diesel fuel, if permitted to stand unused for e xtended periods (30 days or more), ma y de v elop gummy deposits which can adv ersely aff ect the fuel pump and injector tubes and cause engine malfunction.
28 www .ferrisindustries.com Operation Operation 11. Drain fuel system completely or add a gasoline stabilizer to the fuel system. If you ha v e chosen to use a fuel stabilizer and ha v e not drained .
29 Operation Operation Notes.
30 www .ferrisindustries.com Maintenance MAINTENANCE SCHEDULE & PR OCEDURES The f ollowing schedule should be f ollo wed f or normal care of your rider and mower . Y ou will need to keep a record of your oper ating time. Determining operating time is easily accomplished by observing the hour meter .
31 Operation CHECKING / ADDING FUEL (Diesel) T o add fuel: 1. Remov e the fuel cap (A, Figure 13). 2. Fill the tank to the bottom of the fill tube. This will leav e room in the tank f or fuel e xpansion. Ref er to your engine man ual f or specific fuel recommendations.
32 www .ferrisindustries.com Maintenance Regular Maintenance CHECKING / ADDING FUEL (Gas) T o add fuel: 1. Remov e the fuel cap (see A, Figure 13). 2. Fill the tank to the bottom of the filler neck. This will allow f or fuel e xpansion. NO TE: Do not overfill.
33 Maintenance Regular Maintenance CHECK / ADD ENGINE OIL Ref er to Figure 15 f or dipstick and oil fill locations . Ref er to the engine owners manual f or specific engine oil check and fill procedures . Also ref er to the engine owners manual f or specific engine oil and filter change procedures.
34 www .ferrisindustries.com Maintenance Regular Maintenance Figure 18. Radiator & Oil Cooler (Diesel model shown) A. Radiator Pressure Cap B. Radiator Screen C. Hydraulic Oil Cooler CHECK ENGINE COOLANT LEVEL The engine coolant le vel and quality should be check ed bef ore each use, when the engine is cool and off .
35 Maintenance Regular Maintenance LUBRICA TION Lubricate the unit at the locations shown in Figure 20 through 25. Grease: Use grease fittings when present. Disassemble par ts to apply grease to moving parts when grease fittings are not installed. Not all greases are compatib le.
36 www .ferrisindustries.com Maintenance Regular Maintenance B A TTER Y MAINTENANCE NO TE: This unit is equipped with a maintenance-free BCI58 batter y) Cleaning the Battery and Cables 1. Disconnect the cables from the battery , negative cable first (A, Figure 26).
37 Maintenance Regular Maintenance SER VICING THE MO WER BLADES 1. Blades should be shar p and free of nic ks and dents. If not, shar pen blades as described in f ollowing steps . 2. T o remo ve b lade f or sharpening, use a 1” wrench on the flats of the spindle shaft while removing the blade mounting bolt with a 15/16” wrench (Figure 28).
38 www .ferrisindustries.com T roubleshooting TR OUBLESHOO TING While nor mal care and regular maintenance will e xtend the lif e of your equipment, prolonged or constant use ma y e ventually require that service be perf or med to allo w it to continue operating properly .
39 T roubleshooting Rider Troubleshooting Continued. PROBLEM CA USE REMED Y Engine runs, but rider will 1. Hydraulic dump v alve(s) 1. T urn dump valve(s) cloc kwise to close . not drive. in “open” position. T orque to 80-120 in.lbs. (9-13.5 N.m.) 2.
T roubleshooting, Adjustment & Service 40 www .ferrisindustries.com T roubleshooting TR OUBLESHOO TING COMMON CUTTING PR OBLEMS PROBLEM CA USE REMED Y Streaking. 1. Blades are not shar p . 1. Shar pen your b lades. 2. Blades are worn down to f ar .
41 SEA T ADJUSTMENT See Figure 31. The seat can be adjusted f ore and aft. Mov e the le v er f orward, position the seat as desired, and release the le ver to loc k the seat into position. GR OUND SPEED CONTR OL LEVER ADJUSTMENT The control le vers can be adjusted in three w a ys.
42 www .ferrisindustries.com T roubleshooting T roubleshooting, Adjustment & Service NEUTRAL POSITION AND RETURN SPRING ADJUSTMENT T o determine if it is necessar y to adjust the neutral position, perf or m the f ollo wing steps. 1. Disengage the PT O , engage the parking brak e and tur n off the engine .
43 T roubleshooting T roubleshooting, Adjustment & Service P ARKING BRAKE ADJUSTMENT 1. Disengage the PT O , stop the engine , b lock the front wheels, remo ve the ignition k e y , and engage the parking brake . 2. Jac k up the rear of the machine and secure with jackstands .
44 www .ferrisindustries.com T roubleshooting T roubleshooting, Adjustment & Service DECK LIFT R OD TIMING ADJUSTMENT 1. P ark machine on a flat, le vel surf ace . Disengage the PT O , stop the engine and engage the parking brak e. Rear tires must be inflated to 18 psi (1,24 bar); front tires to 25 psi (1,72 bar).
45 T roubleshooting DECK LEVELING ADJUSTMENT NO TE: Bef ore adjusting the deck le v el, the dec k lift rod timing must be chec ked and/or adjusted. 1. P ark machine on a flat, le vel surf ace . Disengage the PT O , stop the engine and engage the parking brak e.
46 www .ferrisindustries.com T roubleshooting T roubleshooting, Adjustment & Service SUSPENSION ADJUSTMENT This unit is equipped with adjustable shoc k assemblies .
47 T roubleshooting T roubleshooting, Adjustment & Service W ARNING T o av oid serious injury , perf orm adjustments only with engine stopped, key removed and tractor on level gr ound. B A C A B B B Figure 47. PTO Clutch Adjustment A. Adjustment Window (Qty .
48 www .ferrisindustries.com T roubleshooting T roubleshooting, Adjustment & Service BEL T REMO V AL & REPLA CEMENT Pump Drive Belt Remov al 1. P ark the tractor on a smooth, le v el surf ace such as a concrete floor . Disengage the PT O, engage the parking brake , tur n off the engine , and remov e the ignition ke y .
49 T roubleshooting T roubleshooting, Adjustment & Service PT O Drive Belt Remo v al 1. P ark the tractor on a smooth, le v el surf ace such as a concrete floor . Disengage the PT O, engage the parking brake , tur n off the engine , and remov e the ignition ke y .
50 www .ferrisindustries.com T roubleshooting T roubleshooting, Adjustment & Service Figure 51. PTO Belt Routing NO TE: Gray areas indicate the flat side of the belt. Figure 52. Spindle Drive Belt Removal A. Idler Arm B. T rim Side Spindle Pulley Figure 53.
51 T roubleshooting T roubleshooting, Adjustment & Service B A TTER Y SER VICE Checking Battery V oltage A voltmeter can be used to determine condition of batter y . When engine is off , the v oltmeter shows batter y v oltage, which should be 12 v olts .
52 www .ferrisindustries.com T roubleshooting W ARNING Any pr ocedure other than the preceding could result in: (1) personal injury caused by electr ol yte squirting out the batter y vents, (2) personal injury or property damage due to battery explosion, (3) damage to the charging system of the booster vehicle or of the immobilized vehicle.
53 Specifications ENGINE: 28 HP* Caterpillar Make Caterpillar Model 3011C Horsepower 28 @ 3600 rpm Displacement 69 Cu. in (1131 cc) Electrical System 12 V olt, 40 amp. Alternator, Battery: 500 CCA Oil Capacity 5.2 US qt. (4.9 L) w/ Filter 35 HP* Briggs Make Briggs & Stratton Model 613177 Horsepower 35 @ 3600 rpm Displacement 61 Cu.
Thank you f or purchasing F erris commercial mowing equipment. Please take a fe w minutes to read this limited w arranty inf ormation. It contains all the information you will need to ha v e your F erris mower repaired in the unlik ely ev ent that a breakdo wn cov ered by this limited w arranty should occur .
Ferris Industries 5375 Nor th Main Street Munnsville, NY 13409 800-933-6175 www .ferrisindustries.com IS4500Z Series Zero-T urn Riding Mower OPERA TOR’S MANUAL BEL TS AND BLADES: TRA CT OR Pump Driv.
Ein wichtiger Punkt beim Kauf des Geräts Ferris 5900621 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Ferris 5900621 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Ferris 5900621 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Ferris 5900621 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Ferris 5900621 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Ferris 5900621 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Ferris 5900621 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Ferris 5900621. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Ferris 5900621 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
