Benutzeranleitung / Produktwartung M10 des Produzenten FARGO electronic
Zur Seite of 178
Persona® C10/M10 ID Card Printer Service Manual (Rev. 4.0) Part Number: L000527.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 2 P ersona C10/M10 ID Card Printer Servi ce Manual (Rev. 4.0), property of FA RGO Elec tronic s, Inc orp orate d Copyright 2003, 2004, 2005, 2006 by FARGO E lectronics, Incorporated.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 3 Table of Content s Introduction _______________________________________________________.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 4 Selecting Card Size _________________________________________________________ 52 Determ.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 5 Adjusting the RP3 Pot entiom eter _____________________________________________ 103 Ali.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 6 Sensor Testing ______________________________________________________________ 151 Revie.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 7 Introduction How to use t he manual The C10/M10 ID Card Pri nter Service Manual (Rev. 4.0) is, in fact, the troubleshooting and field service manual for the entire C10/M10 Card Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 8 Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 9 Section 1: S pecifica tions Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 10 Technica l Spec ifications Term Description Print M etho d Dy e-subl imati on / resin the rmal tran s fer Print Resolution 300 x 300 dpi Print Speed Approximately 40 seconds per full-color card Colors Up to 16.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 11 Technical Speci fications (continued) Term Description Agency Listin gs • Electrical: UL 1950, CUL C2.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 12 Functiona l Spe cifica tions Pri nter Components: Butt ons, Hoppers and Cover This illustration shows the features found on the front of the Card Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 13 Printer Components : But tons, Hoppers a nd Cov er (continued).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 14 Pri nter Components: Ri bbons and Cards Please note that the Printer requires specializ ed Ribbons in order to function properly . To order additional Ribbons, contact the authorized reseller.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 15 Printer Components : Ribbons and Cards (continued) Term Description Clear Overlay Panel The Ribbons which hav e a clear overlay panel w ill print an ID card and place a clear, protective overlay over the card’s printable area.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 16 Section 2: Setup and Installation Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 17 Introducti on Thank you for choosing the color Card P rinter. This fast, compact Printer has been designed to print high-quality, full-color cards from virtually any Windows® application program.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 18 Connect ing the Printe r to th e Comput er The Card Printer is designed to be used with nearly any IBM-PC or compatible running W indow s 3.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 19 Installin g the Windo w s Print er D river The Card Printer can be used with virtually any Microsoft W i ndows 3.1x, W indows 95/98, W indow s NT 4.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 20 Insta lling the Pri nter Driver fr om the Software Ins tallation CD Step Procedure 1 To install the Printer Driver, close down all other programs and insert the S oftware Installation CD into the computer's CD drive.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 21 Installing the Printer Driver from the Software Installa tion CD (continued) Step Procedure 1 Click t he Start button, point to Settings and selec t Printers .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 22 Insta lling Pri nter Driver Update s Occasionally, new Printer Driver versions are released whi ch have new or updated features.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 23 Insta lling the 32- Bit Print Spooler for Windows 95/98 The C ard P rinter shi ps w ith a pri nt uti lity program call ed the 32 -Bit P rin t Sp ool er.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 24 Installing the 32-Bit Print Spooler for Windows 95/98 (continued) W he n the 32-Bit Print Spooler is running, its icon will appear in the Windows Task Bar.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 25 Installing the 32-Bit Print Spooler for Windows 95/98 (continued).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 26 Loading R ibbon I nto The Print er Follow these steps to load Ribbon into the P rinter: Step Procedure 1 Remove the Ribbon from its pac kaging.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 27 Loading Ribbon Into The Pr inter (continued) Step Procedure 3 Open the T op Cover of the Printer by gent ly grasping the front sides of the Cover and lifting upward.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 28 Loading Ribbon Into The Pr inter (continued) Step Procedure 4 Open the Printhead Assembly by gently pulling up on the assembly ’s Release Tab and lifting upw ard.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 29 Loading Ribbon Into The Pr inter (continued) Step Procedure 5 a. Place the supply end o f the Ribbon in between the two bl ack Ribbon Drive Hubs located on the right-hand side o f the Printer’s interior.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 30 Loading Ribbon Into The Pr inter (continued) Step Procedure 6 Place the take-up end of the Ribbon roll in between the two black Ribbon Driv e Hubs located on the left-hand side of the Printer’s interior.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 31 Loading Car ds into the Pri nter The Card Printer prints onto standard CR-80 siz e cards (3.375L x 2.125 W x .030 / 86mmL x 54mmW x .75mm), which hav e a clean, level, polished PVC surface.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 32 Loading Cards I nto t he Printer (c ontinued) The Printer holds a maximum of 50 CR -80 size cards in its Card Input Hopper. The Printer will automatically feed each card off the top of the stack.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 33 Loading Cards i nto t he Printer (c ontinued) Step Procedure Remove a stack of 50 or fewer cards from the ca rd packaging. Do not touch the area of the cards on w hich you intend to print.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 34 Po w eri ng-up t he Print er Ap pl yin g Pow er Locate the Desk-Top Transformer supplied w ith the system. Check that it is prope rly configured for the power used in the country.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 35 A ppl ying Power (continued) Step Procedure 2 Plug the DC pow er plug end o f the transformer cord into the Power Input Port on the r ear panel of the Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 36 Printing a Self Test Now that Ribbon and cards are installed , a self test should be performed t o check for proper operation of the Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 37 Section 3: Troubleshooti ng the Printer If you have difficulty operating the Card Printer, the troubleshooting suggestions in this section should, in most cases, solv e the problem.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 38 Resolvi ng problems w ith the flashing Onl ine LED light This indicates a reCoverable printing error regarding the print media or su pplies.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 39 Resolvi ng problems w ith the flashing On/ Cancel LED light Step Procedure 1 If th e On /Cancel LED is flashing, this indicates a possible error with the Printer’s memory.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 40 Resolvi ng problems w ith Ribbon winding a nd printing Symp toms: The Printer skips Ri.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 41 Resolvi ng problems w ith the Card Jams If a card becomes jammed inside the Printer, r.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 42 Resolvi ng problems w ith the Ribbon Jams If the Ribbon becomes jammed in the drive Roll er (visible when you open the Printer), use the following procedure to correct the problem: Step Procedure 1 Leave the power ON.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 43 Resolvi ng problems (related to the Pri nter stopping or making stra nge sounds) Symp toms: Printer makes strange sounds or stops printing and the on-line LE D light is flashing.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 44 Resolvi ng problems w ith Ribbon winding a nd printing Step Procedure 1 Gently insert the tip of a small flathead screw Driver into the hole so i t fits into the slot of RP2.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 45 Resolvi ng problems w ith torn or broken Ribbons Symp toms: Printer stops printing or simply continues to wind the take-up end of the roll and the on-line LED light is flashing.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 46 Resolvi ng problems w ith streaks in Pri nts Symp toms: Scratches or lines travel the entire l ength of the printed card. Step Procedure 1 Symp tom: There may be dust on the Printhead.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 47 Resolvi ng problems w ith pixelated Photos on ID cards Symp toms: Photos do not loo k smooth or continuous, but rather grainy and unclear.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 48 Resolvi ng problems w ith card feeding and Onl ine LED blinking Symp toms: The Printer starts to make noise li k e everything is fine, but n o card feeds.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 49 Section 4: Printer Driv er Setup Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 50 Installin g the Printer Driv er Once the appropriate Printer Driver has been instal led, you will need to set the Driver up with the proper print options.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 51 Using the Color ID Car d II Pr inter A d vanced Docume nt Settings Access the Color ID.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 52 Selec ting Pape r/Output Selecting Card Size This option displays a list o f the available card size selections.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 53 Deter mining the number of Copies Use this function to i ndicate copies required. Step Procedure 1 Specify the number of copies to be printed by clicking on the up or dow n arrows.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 54 Sele cting the Default Gra phic Resolution This is a default selection.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 55 Docume nt Options Step Procedure 1 Use the Device options tab to select options that control the Printer’s functi ons .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 56 Sele cting from the Ribbon T ype options Use the Ribbon Type dropdow n menu to select the correct ribbon type. Step Procedure 1 Select Ribbon Type under Document options to change the setting.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 57 Selecting from the Ribbon Type options (continue d).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 58 Sele cting from the Color M atching options Use this option to control where the resin black (K ) panel of a full-color ribbon is printed.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 59 Selecting from the Color Matchi ng options (continued).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 60 Using the Image C ontrols Use the Custom Settings option under Ima ge Controls to control the Contrast and Ga mma of the printed image, as w ell as the individual color balance of Yell ow Bal anc e , Magenta Balance and Cy an Balance .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 61 Control ling the Dye-Sub I ntensit y ( YMCB) Step Procedure 1 Control the overall dark.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 62 Control ling the Resin He at Step Procedure 1 Control the amount of heat the Printer uses when printing w ith the resin black panel(s) of a full-color ribbon or w hen printing with a resin-only ribbon by adjusting the Resin Heat .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 63 Using the default Dither Mode This is a default selection.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 64 Sele cting the K Panel Graphi cs Mode option Use this option to control where the resin black (K ) panel of a full-color ribbon is printed.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 65 Selecting K Pan el On ly (95% ) / ( 99% ) These option are only active w hen t he K Panel Graphi cs options is selected.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 66 Selecting the Print Ed ge-to-Edg e option Use this option for Edge-to-Edge type printing. Step Procedure 1 Select this option to adjust the maximum printable area on a card, which results in printed cards w ith virtually no border.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 67 Selecting the R otate 180 Degrees o ption Use this option to rotate the ima ge on the front o f the card 180 de gr ees w hen printed.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 68 Selecting the Overlay option Use thi s option to automat ically print Neith er S ide , Back Side Only , Front Side Only , or Both Sides of a car d.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 69 Selecting the Overla y option (continued).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 70 Using the Magne tic Enc oding O ptions Use this option only if the Printe r has an optional M agnetic Stripe Encoding Modul e installed. ( Note: This section describes these options and the Printer's Magnetic Encoding process.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 71 Using the Magnetic Encodi ng Mode option Use the Magnetic Encoding M ode option to specify the desired, Magnetic Encoding standard.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 72 Selecting the Magnetic T r ack Op tions Use the Magneti c T rack options for these purposes: • Customize the ISO encoded data format for each o f the Magnetic Stripe's three Tracks.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 73 Sele cting the Track Bit Dens ity option Use this option to customize the Bit Recordin g Density (Bits per Inch) used to encode the magnetic data on the currently selected Track.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 74 Sele cting the Track LRC Gene ration option Use this option to customize the LRC Generation Mode (used to encode the magnetic data on the currently selected Track).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 75 Selecting the T r ack C haracter Si ze option Use this option to customize the Character Data Size (Bits per Character) used to encode the magnetic dat a on the currently selected Tr ack.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 76 Sele cting the Track Char acter Parit y option Use this option to customize the Character Data Parity (used to encode the magnetic da ta on the currently selected Track).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 77 Selecting the T r ack C haracter A SCII Offset o ption Use this option to customize the Character ASCII Offset used to encode the magnetic data on the currently selected Track.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 78 Sele cting the Shift Dat a Left option Use this option to shift the recorded magnetic data to the le ft-hand side of the card's Magnetic Stripe.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 79 Sele cting the Verify Magneti c Encoding opt ion Use this option to v erify the encoding se ttings. Step Procedure 1 Select this option to instruct the Printer to veri fy that all magnetic data has been correctly encoded on ea ch c ard.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 80 Review ing ISO Track Loca tions Review the M agnetic Encoding module, w hich encodes onto Tracks in acc ordance with an ISO 7811-2 Magnetic Stripe.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 81 Sending Tr ack Informat ion Magnetic Track data is sent in the f orm of text strings from the application software to t he Printer Driver along with all of the other printable objects within the card d esign.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 82 Review ing Tracks 1, 2, and 3 (in Ta ble format) Review this Table, which displays the SS, ES , FS and the vali d characters defined for each Tra c k.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 83 Review ing the ASCII Code a nd Character Table ASCII C ode Character A SCII Code Chara.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 84 Selecting Sma rt Clipping Rec tangle.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 85 Sele cting the Disable Pr inting option Use this option to disable the printin g capabilities of the Printer and still allow the Printer to encode cards.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 86 Selec ting the Calibra tion windo w Use this option to (a) control the posi tion of the pri ntable area in rela tion to the card, (b ) calibrate Sensors and (c) adjust the internal P rinter settings.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 87 Using the Image P lacement con trols Step Procedure 1 Click on the Vertical and Horizontal ad justment arrows to adjust the Ima ge Position values.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 88 Using Image Place ment controls (continued) Review the Image Position diagram, w hich displays how the printed image w il l move in relation to the fixed card position as positiv e and negative image placement values are entered.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 89 Selecting the Self T est button Use this option to send a Sel f Test page to the Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 90 Printing a Card Now that you have set up the Printer, loaded media and i nstalled the Printer Driver, you are ready to print an ID ca rd.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 91 Section 5: Diagnostic To ols, Calibration, and Interface In formati on Safet y Messa g.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 92 Diagnost ic Tools – St art by running a Self -Test Perform a self test after initial setup of the p rinter, after a calibration procedure has been conducted, or after a part has been replaced.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 93 Calibra ting the Printhea d Caution No. 1: This devi ce is electrost atic sen sitive. It may be damaged i f exposed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 94 Aligning t he Headli ft Sensor Step Procedure 1 Close the Upper Imaging Assembly; leave the Top Cov er open. 2 Apply power to the printer; press both the on-line and on/cancel buttons at the same time.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 95 Making M echanical Adjustments to the Printhea d Refer to the followi ng tr oubleshooting tips if y ou feel the Printhead Assembly requires additional adjustment.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 96 Making Mecha nical A djustments to the Printhea d (continued) Symp tom Overall printed image looks broken up and/or faded. Solutio n: The ribbon de flector on the Printhead may be too low .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 97 Making Mecha nical A djustments to the Printhea d (continued) Symp tom: Printed image has a dark band across the card, about 1/8 in. (3mm) from the card leading edge.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 98 Making Mecha nical A djustments to the Printhea d (continued) Symp tom: Printed image has discolored arcs acr oss the card. Solutio n: The ribbon de flector on the Printhead may be too hi gh.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 99 Making Mecha nical A djustments to the Printhea d (continued) Caution: In order for the printer to function properly with the new Printhead Assembly, you MU ST have firmware version 1.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 100 Cali brating the Ribbon Sensor Use this procedure (a) when colors on the printed card.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 101 Adjusting t he RP2 Potent iometer Step Procedure 1 Install the f ull-color ribbon in the printer. 2 Position the Magenta panel, from the supply spo ol, across the top of the Light Emitting portion of the Ribbon Sensor Array.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 102 Adjusting t he RP2 Potent iometer Note: RP2 has two stops; do not turn the screw beyond these stops. Once both LEDs are OFF, the ribbon sensor cali bration is completed.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 103 Cali brating the Left Car d Sensor W he n this part is moved or replaced, the lengthw ise print position on cards can be a ffected.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 104 A lignin g th e Ste p per Moto r The Stepper Motor Assembly may re quire alignment when replaced. Step Procedure 1 Examine the teeth on the pi nion gear of the Stepper M otor.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 105 Cali brating the Ribbon ID S ensor Board The replacement Ribbon ID Sensor Board is calibrated by the factory; the procedure below is not necessary in most cases.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 106 Cali brating the Ribbon ID S ensor Board Step Procedure 1 Remove all external cables from the back o f the printer. 2 Remove the ribbon from the printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 107 Cali brating the Ribbon ID S ensor Board Step Procedure 14 Read the voltage at R35; it should read + 0.75 V d c. Note: If the vol tage is lo we r than + 0.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 108 Interfa cing Inf ormation The Card Printer is equipped w ith a standard 8-bit Centronics-type parallel data communications port. This is the means by w hich t he Printer receives data from the computer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 109 Centr onics-ty pe Parallel Int erf ace (co ntinu ed) W ir e Diagram of DB36P and DB25.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 110 Centr onics-ty pe Parallel Int erf ace (co ntinu ed).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 111 Centr onics-ty pe Parallel Int erf ace (co ntinu ed).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 112 Section 6: P arts Replac em ent Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 113 Reviewing the Part Numbe r/Description and Drawing Number Table This section guides you through replacement of key components of the card p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 114 Review ing the Drawing Inde x.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 115 Review ing the Print Cir cuit Board Cable Conne ctor Locati ons.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 116 Replacing the Rear P ivot Co ver (830168) It may be necessary to remove the Rear Pivot C over or the Front Cov er for many of the replacement procedures in this section.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 117 Replacing the Fron t Cov er Assembly (830182-02) Refer To Drawi ng 8301XX. TTR: 5 minutes. Step Procedure 1 Unplug the power cord from the p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 118 Replacing the Print C ircuit Bo ard (140300) Refer To Drawing 830179. TTR: 10 minutes Step Procedure 1 Unplug the power cord and any external cables from the printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 119 Replac ing the Pow er Circuit Board (1403 02) Refer To Drawing 830179. TTR: 20 minutes. Step Procedure 1 Unplug the power cord and any external cables from the printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 120 Replacing the Printh ead A ssembl y (820102) Refer To Drawing 830119-XX.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 121 Replacing the Printh ead Harness A ssembly (830162-00) Refer To Drawing 830119-XX.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 122 Replacing the Print head H arness A ssembly (830162-00) (cont .) Step Procedure 13 Remove the Screw (130972) that secures the Headlift Sensor Switch to the Front Plate/Print Assembly Sideplate (830302).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 123 Replacing the Ribb on Senso r Board A ssembl y (830151) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 124 Replacing the Cleaning Roller A sse mbly (830177) Refer To Drawing 830177. TTR: 1 minute. Step Procedure 1 Unplug the power cord from the p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 125 Replacing the Fron t Panel Bo ard A ssembly (830164) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 126 Replacing the Left C ard Senso r As sembly (830135) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 127 Replacing the Head lift Motor A ssembl y (830143) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 128 Replacing the Card Feed A ssembly (830145) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 129 Replacing the Ribb on Drive A ssembl y (830147) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 130 Replacing the Slotted Sen sor Mount A s sembly (830149) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 131 Replacing the Lid Sen sor A ssembly (830150) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 132 Replacing the Stepp er Motor A sse mbly (810113) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 133 Replacing the Ribb on ID Senso r Board A ssembl y (763173-2) Caution: This device is electrostatic sensitiv e. It may be damaged if ex posed to static electrical discharges.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 134 Replacing the Card F eed S witch A ssembly (830136) Refer To Drawing 830131, Item 12. TTR: NA In the unlikely event of failure, this cable is not field serviceable.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 135 Replacing the Platen Roller (81026 1) Refer To Drawing 830118-XX. TTR: 15 minutes Step Procedure 1 Unplug the power cord from the p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 136 Replacing the Card Inp ut Roller (810262) Refer To Drawing 830118-XX. TTR: 15 minutes each roll er. Note: The follow ing instructions are for the C ard Input Rolle r near the cent er of the p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 137 Replac ing the Left Card Input Rol ler Step Procedure 1 Unplug the power cord from the p rinter. 2 Take off the Re ar Pi vo t Cov er. 3 Detac h the Prin t Circ uit Boa rd from th e cha ssis.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 138 Replacing the Card F eed Roller (810304) Refer To Drawing 830118-XX. TTR: 15 minutes. Step Procedure 1 Unplug the power cord from the p rinter.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 139 Replacing the Mag netic Head A sse mbly (High-Coercivit y : 83019012 or Lo w Coercivity : 83019012) Caution: This device is electrostatic sensitiv e.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 140 Insta lling the New Magnet ic Hea d Assembly Step Procedure 1 Position the new magnetic head in the Access Plate area. 2 W or k the cable connector through the opening to the baseplate a rea.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 141 Section 7: Maintenance and Cleaning Safet y Messa ges (re v iew carefull y) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 142 Section 7: Maintenance and Cleaning (continued) The Card Printer is built to re quire a minimum amount of maintenance.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 143 Suppli es Required For the maintenance procedures outlined in this s ection, you will.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 144 Standar d Printhead Cl eaning This procedure should be performed if you notice a s treak on the card w her e color w as not transferred.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 145 Expanded Pr inthead Cle aning Perform if you have a streak on the printed output that can’ t be solved by the Standard Printhead Cleaning procedure.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 146 Cleani ng the Printer Cas e The Printer has a durable casin g that should retain its luster and appea rance for many y ears. Clean it only with a soft cl oth slightly moistened with water or a mild soap.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 147 Cleani ng the Card Feed Roller s To assure consistent Printer operation, all of the gray card Feed Rollers within the Printer should be cleaned during every Ribbon change (every 250 prints) or if the Roll ers are noticeably dirty.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 148 Cleani ng the Drive Roller The Drive Roller should be cleaned durin g every Ribbon change or a fter every 250 prints. This helps to prevent jams and maintain uninterrupted service.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 149 Mainta ining the Cleani ng Rollers The Cleaning Rollers remove dust particles from a blank card as it feeds into the Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 150 Section 8: P acking the C10/M10 C ard P rinter The purpose of this section to provide the User with a speci fic packing procedure for the C10/M10 Card Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 151 Section 9: Board Lev el Diagnostics The purpose of this section to provide the User with specific Board Lev el Diagnostic procedures for Board Errors and Sensor Testing for the C10/M10 Card Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 152 Section 10: FARGO Techni cal Support The purpose of this section to provide the User with an efficient, step-by-step procedure to be used when contacting Fargo Technical Support as needed for the C10/ M10 Card Printer.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 153 Section 11 : Revi ewing C10 and M10 Spare Parts List C10 and M10 ID Card Printer Recommended Spare Parts List Effective Date: April 2004 For current pricing see http:// www.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 154 Glossary of Terms Term Definition 24-bit color A color depth for an i mage that uses 8 bits for each color (red, blue, green) combining the possible 256 shades t o provide a color depth of 16.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 155 Reviewing the Gl ossary of Terms (continued) Term Definition Barcodes A series of alt.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 156 Reviewing the Gl ossary of Terms (continued) Term Definition Cache A ty pe of memory .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 157 Reviewing the Gl ossary of Terms (continued) Term Definition CR-79 A card dimension standard of 2.0625" L X 3.3125" W (+/-0.002" W , +/-0.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 158 Reviewing the Gl ossary of Terms (continued) Term Definition Dire ct-to-C ard (DTC ) Printing The Direct-to-Card printing process prints digital images directly onto any plastic card with a smooth , clean, glossy PVC surface.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 159 Reviewing the Gl ossary of Terms (continued) Term Definition Dwell Time The speed at which the c ard moves across the la m Roller, measured in seconds/inch (sec/in).
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 160 Reviewing the Gl ossary of Terms (continued) Term Definition Encoder (wheel) An electromechanical device, attached to a sha ft that detects the change in rotational position, incremented to count ticks per revolution.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 161 Reviewing the Gl ossary of Terms (continued) Term Definition Flash Memory A microchip based non-volatile memory devi ce that holds its data when power is removed.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 162 Reviewing the Gl ossary of Terms (continued) Term Definition Hard Drive A high capacity storage dev ice in a PC consisting o f non- removable magnetically encodable platters.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 163 Reviewing the Gl ossary of Terms (continued) Term Definition IEEE 1284 (I nstitute of Electr ical and Electronics Engineers 1284) A standard method of signali ng for a bi-directional parallel interface on personal co m puters.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 164 Reviewing the Gl ossary of Terms (continued) Term Definition Landscape A docum ent lay out that is viewed with the document's long ax is in a horizontal orientation.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 165 Reviewing the Gl ossary of Terms (continued) Term Definition MB (Megabyte) A unit of storage that equals 1,048,576 bytes.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 166 Reviewing the Gl ossary of Terms (continued) Term Definition Oversized Cards Oversized cards are used for more e fficient visual identification and are available in many non-standard sizes.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 167 Reviewing the Gl ossary of Terms (continued) Term Definition Pinch Roller A free spin.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 168 Reviewing the Gl ossary of Terms (continued) Term Definition Printhead The device on a Printer that produces the i mage on the media. PVC Abbreviation for polyvinyl chloride, often called vinyl .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 169 Reviewing the Gl ossary of Terms (continued) Term Definition Resolution The number of individual pixels in a graphic, take n over a given length, used to indicate the sharpness of the picture and the lev el of detail.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 170 Reviewing the Gl ossary of Terms (continued) Term Definition RS-232 An interface standard, established in 1969 by the Electronic Industries Association, regarding the connecting o f computer peripherals.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 171 Reviewing the Gl ossary of Terms (continued) Term Definition Softw are In struc tions saved in co mpute r mem ory tha t dire cts th e c ompu ter to perform certain tasks and functions.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 172 Reviewing the Gl ossary of Terms (continued) Term Definition Test-print A f ile stored in or gen erated through windows that is sent to the Printer t o test basic functionality.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 173 Reviewing the Gl ossary of Terms (continued) Term Definition Update The process of installing a new revision of software or firmware to implement new changes to the Printer's command codes and procedures.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 174 Reviewing the Gl ossary of Terms (continued) Term Definition YMCKK The designation of.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 175 Index A AC - Alterna ting Current, 1 54 Access Card, 154 Adhesion, 154 Algebraic, 154.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 176 ECP Mode (Enhanced C apabi lities Port Mode), 159 Edge-to-E dge, 66, 159 EE Memory , .
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 177 Mag Verify, 164 Magnetic Encoding options, 72 Magnetic Stripe, 16 4 Magnetic S tripes.
R ESTRICT ED USE ONL Y Fargo Elec tronics, Inc . Persona C 10/M10 ID Card Print er Servic e Manual (R ev. 4.0) 178 Sensor, 170 Sensor Location and V oltages table, 151 Sensor Testing, 151 Serial inter.
Ein wichtiger Punkt beim Kauf des Geräts FARGO electronic M10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie FARGO electronic M10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für FARGO electronic M10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von FARGO electronic M10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über FARGO electronic M10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon FARGO electronic M10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von FARGO electronic M10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit FARGO electronic M10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei FARGO electronic M10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
