Benutzeranleitung / Produktwartung HDP600-LC CR100 des Produzenten FARGO electronic
Zur Seite of 432
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) • HDP600 (Dual-Sided Card Printer/Encoder) • HDP600-LC (Dual-Sided Card Printer/Encoder) • HDP600 CR100 (Dual-Sided Card Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) ii HDP600 High Definition C ard Printer/Encoder User Guide (Rev . 2.5), property of Fargo Electronics, Incorpor ated Copyright © 2003 by Fargo Electronics, Incorporated.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) iii Table of Contents Section 1: Printer Overview ______________________________________.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) iv Introducti on ____________________________________________________________________ 3-.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) v Resolving the Bla nk O utput issues __________________________________________________.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) vi Specifying UDP Event loggin g _____________________________________________________ 5.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) vii Selecting t he Card Ho pper (HDP 600 and HDP600- LC onl y) _________________________.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) viii Cleaning o utside the Printe r ____________________________________________________.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) ix Reading the Se rial Number s o n a Fargo Pri nter ___________________________________________ 13-2 Finding out when a Farg o Ca rd Print er was m anufacture d ________________________________ 13-2 Reviewing E xampl e No.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-1 Section 1: Printer Overview How to use the guide The HDP600 High Definition Card Printer/Encoder User Guide (Rev.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-3 HDP600 Overview Reviewing the HDP600 Block Diagram The HDP600 Block Diagram will be created and added to this service document at a future date.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-4 Reviewing the HDP600 Sequence of Operations The following sequence describes a dual sided full color print job with magnetic encoding.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-5 Reviewing HDP ® 600 Series Card Printer - Sequence of Operations (continued) Step Process 12 The Fan turns ON as required to keep head coo l.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-6 Reviewing HDP ® 600 Series Card Printer - Sequence of Operations (continued) Step Process 23 The Stepper and Film Drive engage to laminate the printed Film onto the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-7 Reviewing the HDP600 Boot up Sequence Step Process Step Process 1 The Card feed stepper turns ON (to check for a card on the Flipper table ).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-8 Reviewing the Lamination Module Sequence of Operations The LAM sequence of operations begins after printing has occurred with the Card Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 1-9 Reviewing the Lamination Module Boot up Sequence Step Process 1 The Lamination Headlift turns until the head up position is returned from Headlift Sensor.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-1 Section 2: S pecifications The purpose of this section is to provide the User with s.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-2 Introduction The purpose of this section is to provide the User with specific information on the Regulatory Compliances, Agency Listings, Technical Specif ications and Functional Specifications for the HDP ® 600 Card Printer/Encoder.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-3 Reviewing the HDP600 Package These items are included with your HDP600: • Unpackin.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-4 Reviewing the HDP600 CR100 Card Printer Display A – HDP600 CR100 Printer with deta.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-5 HDP600 - Regulatory Compliances Term Description CSA (cUL) The Printer manufacturer has been authorized by UL to represent the Card Printer as CSA Certified under CSA Standard C22.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-6 Technical Specifications Term Description Accepted Standard Card Sizes HDP600 and HDP600-LC (See Card tab under Printer Adjustments): • CR-80: This selection is the default form size for the HDP600.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-7 Technical Specifications (continued) Term Description Accepted Card Thickness .030 in. (30 mil) to .070 in. (70 mil) (.762mm to 1.778mm).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-8 Technical Specifications (continued) Term Description Dimensions • HDP600: 15” H x 26.1” W x 14” D/381mm H x 663mm W x 356mmD • HDP600-LC: 15” H x 34.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-9 Technical Specifications (continued) Term Description Fargo Certified Supplies Fargo Card Printer/Encoder require highly specialized media to function properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-10 Technical Specifications (continued) Term Description Memory 8 MB RAM; expandable to 32 MB RAM Operating Temperature 65º F to 80º F (18º C to 27º C).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-11 Technical Specifications (continued) Term Description Print Ribbon Options HDP600 a.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-12 Technical Specifications (continued) Term Description Resolution 300 dpi (11.8 dots/mm) Software Drivers Windows® 2000/XP Supply Frequency 50 Hz / 60 Hz Supply Voltage 100 to 240 VAC, 3.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-13 Functional Specifications The Card Printer utilizes two different, yet closely related printing technologies to achieve its remarkable print quality for dye-sublimation and resin thermal transfer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-14 Functional Specifications (continued) Function Description Resin Thermal Transfer R.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-15 Functional Specifications Function Description Scroll Buttons Used to scroll through menus and sub-menus and to adjust certain menu options.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-16 Printer Components: LCD and Softkey Control Pad The Printer provides a four line, eighty (80) character LCD Displays that can communicate helpful information about the Printer's operation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-17 Printer Components: LCD and Softkey Control Pad (continued) Component Description R.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-18 Printer Components: LCD and Softkey Control Pad (continued) Component Description Print Status Screen During operation, the LCD will indicate the current Print Status by showing you the area of the Printer that is active.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-19 Printer Components: LCD and Softkey Control Pad (continued) Component Description The Pause button Use this button to pause the Printer at any time during operation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-20 Printer Components: LCD and Softkey Control Pad (continued) Component Description E.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-21 Printer Components: Print Ribbons The Card Printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images (print to film and transfer film to card).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-22 Printer Components: Blank Cards Caution: Never run cards with a contaminated, dull or uneven surface through the Printer. Printing onto such cards will ultimately lead to poor print quality.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-23 Printer Components: Card Input and Output Hoppers Type Description Card Input Hopper The Card Input Hopper is where cards are initially loaded for printing.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-24 Printer Components: Card Output Hopper and Reject Hoppe r Type Description Card Out.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-25 Printer Unit: Reviewing the Card Lamination Module Danger: The Printer’s Lamination Roller can reach temperatures exceeding 350° F (175° C).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-26 Printer Components: Transfer Roller Danger: The Printer’s Transfer Roller can reach temperatures exceeding 350 degree F (175 C). Use extreme caution when operating the Transfer Roller.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-27 Reviewing the Overlaminates IMPORTANT! Fargo Card Printers require highly specialized overlaminates to function properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 2-28 Reviewing the CR-90 or CR-100 Patch Size Term Description Cross Reference CR-90 or .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-1 Section 3: Inst allation Procedures Safety Messages (review carefully) Symbol Critical Procedures for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-2 Introduction Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100. The following guide will walk you through the installation of the Fargo HDP600 Driver.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-3 Choosing a Good Location Follow these guidelines: • Place the unit in a location with adequate air circulation to prevent internal heat build -up.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-4 Printer Loading Procedures Loading the Print Ribbon Note: Fargo Card Printers require highly specialized supplies to function properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-5 Loading the Print Ribbon (cont.) Display B – Loading the Print Ribbon (supply spool). (Note: The Print Ribbon comes wound on a gray spool with an orange ring around one side.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-6 Loading the Print Ribbon (cont.) Display C – Loading the Print Ribbon (take-up spo.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-7 Loading the Print Ribbon (cont.) Display D – The Print Ribbon is shown successfully installed below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-8 Loading clear HDP Film into the Transfer Station Step Procedure 1 Caution: Ensure that the Printer is turned off and the power cord is unplugged from the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-9 Loading clear HDP Film into the Transfer Station (c ontinued) Display B – Loading the HDP Film (take-up spool).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-10 Loading clear HDP Film into the Transfer Station (c ontinued) Display C – Loading the HDP Film (take-up spool).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-11 Inserting the Card Cleaning Cartridge Step Procedure 1 Load the Card Cleaning Cartridge, as shown in the three (3) Photos (Displays A to C) in this section.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-12 Inserting the Card Cleaning Cartridge (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-13 Inserting the Card Cleaning Cartridge (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-14 Loading the Overlaminate ( Note: This procedure only applies to the HDP600-LC Laminating Card Printer/Encoder.) The loading process for both the Thermal Transfer Film and the PolyGuard™ Overlaminate material is the same.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-15 Loading the Overlaminate (continued) Step Procedure 4 Place the supply end of the overlaminate roll in between the two black Lamination Drive Hubs.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-16 Loading the Overlaminate (cont.) Step Procedure 5 Load the take-up end of the roll just as you loaded the supply end.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-17 Loading the Overlaminate (continued) Step Procedure 6 Close the Lamination Arm by pressing down on the center of the Lamination arm until it snaps into place, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-18 Loading the Overlaminate (cont.) Step Procedure 7 To complete this section, close the L amination Module cover.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-19 Connecting power to the HDP600 Printer Caution: Do not remove the red Warning sticker across the USB connection. Do not plug in the USB cable until prompted to do so during the installation of the HDP600 Printer Driver.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-20 Connecting power to the HDP600 Printer (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-21 Connecting power to the HDP600 Printer (cont.) Display C - Connecting the other end of the AC power cable to a Surge Protector. See both notes below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-22 Connecting power to the HDP600 Printer (cont.) Display D - Connecting the plug from the power supply to the Printer as shown belo w. ( Note: If working with a non-Lamination unit, proceed to Display H in this section.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-23 Connecting power to the HDP600 Printer (cont.) This applies to the HDP600-LC Printer only. Display E - Connecting the AC power cable to the Card Lamination power supply.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-24 Connecting power to the HDP600 Printer (cont.) This applies to the HDP600-LC Printer only. Display F - Connecting the other end of the AC power cable to a Surge Protector.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-25 Connecting power to the HDP600 Printer (cont.) This applies to the HDP600-LC Printer only. Display G - Connecting the plug from the power supply to the Card Lamination Module, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-26 Connecting power to the HDP600 Printer (cont.) Display H – Displays the Printer power switch (ON/OFF). Note No. 1: Turn on the Printer’s power by pressing on the power switch.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-27 Loading the Blank Cards Step Procedure 1 Load the blank cards, as shown in th e three (3) photos (Displays A to C) in this section. Display A – Setting the Card Thickness Adjustment Lever to the appropriate setting.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-28 Loading the Blank Cards (cont.) Display B – Loading the Blank Cards into the empty Hopper.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-29 Loading the Blank Cards (cont.) Display C – Inserting the Card Weight (Push to the back).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-30 Printer Driver Installation Procedures Installing the HDP600 Printer Driver Step Procedure 1 Close down all programs and insert the Software Installation CD into your computer’s CD drive.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-31 Installing the HDP600 Printer Driver (cont.) Step Procedure 3 a. Read the License Agreement. Select the I accept the terms of the license agreement option.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-32 Installing the HDP600 Printer Driver (cont.) Step Procedure 4 If installing a USB Printer, select the Local Connection (USB) radio button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-33 Installing the HDP600 Printer Driver (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-34 Installing the Printer Driver (Windows 2000 Only) Step Procedure 6 Click Next to continue.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-35 Installing the Printer Driver (Windows XP Only) (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-36 Installing the HDP600 Printer Driver (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-37 Installing the HDP600 Printer Driver (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-38 Installing the HDP600 Printer Driver (cont.) Step Procedure 10 This step only applies if you are installing a USB Printer. a. Connect the USB cable to the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-39 Installing the HDP600 Printer Driver (cont.) Step Procedure 11 Select the Ribbon Type from the dropdown menu. See Display A under this procedural step.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-40 Installing the HDP600 Printer Driver (cont.) Step Procedure 12 Click the Finish button to complete the Installware Wizard. 13 You have completed this procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-41 Printing a Test Print Image Step Procedure 1 a. From your computer’s startup m enu, select Settings > Printers and Faxes (Windows XP) or > Printers (Windows 2000).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-42 Printing a Test Print Image (cont.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-43 Printing a Test Print Image (cont.) Step Procedure 3 This completes the HDP600 High Definition Card Printer/Encoder Installation Guide.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-44 Card Lamination Module Installation Introduction The following guide provides a step-by-step installation procedure for the HDP600 Lamination Module and Printer Driver Upgrade.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-45 Inspecting the Card Lamination Module While unpacking your Lamination Module, inspect the carton to ensure that no damage has occurred during shipping.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-46 Installing the HDP600 Series Card Lamination Module Tools Needed: #2 Phillips screwdriver, Torx T-10 screwdriver Parts Included: Card Lamination Module (D860105), Phillips 4-40 Flathead Screws (X2) and Torx T-10 0.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-47 Installing the HDP600 Series Card Lamination Module (continued) See the previous page.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-48 Installing the HDP600 Series Card Lamination Module (continued) Step Description 2 Place the Lamination Module at a slight angle to the Printer, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-49 Installing the HDP600 Series Card Lamination Module (continued) Step Description 3 Connect the Lamination Power Cable (3-pin connector) to the Connector mounted on the HDP Sideplate.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-50 Installing the HDP600 Series Card Lamination Module (continued) Step Description 5 a. Slide the Card Lamination Module (D860105) horizontally to engage the Printer or the HDP600 Main Assembly (D860101), as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-51 Installing the HDP600 Series Card Lamination Module (continued) Step Description 6 a. Fasten the two (2) Torx T-10 0.5M3 X 5 Screws (F000169) into the Rear Cover, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-52 Installing the HDP600 Series Card Lamination Module (continued) Step Description 8 Insert the Driver disk into the CD drive of your PC.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-53 Printing a Test Print Image Step Procedure 1 d. From your computer’s startup m enu, select Settings > Printers and Faxes (Windows XP) or > Printers (Windows 2000).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 3-54 Printing a Test Print Image (continued) Step Procedure 3 This completes the HDP600 High Definition Card Printer/Encoder Installation Guide.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-1 Section 4: General T roubleshooting The purpose of this section is to provide the Us.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-2 LCD Messages Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100. The LCD display shows the current status of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-3 Reviewing LCD Messages (continued) Message Cause Solution Card Jam: Lam There is a card jam in the Laminator. Clear the jam. Card Jam Error A card is jammed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-4 Reviewing LCD Messages (continued) Message Cause Solution Check Ribbon Error The print Ribbon may be jammed, not installed properly, broken or damaged.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-5 Reviewing LCD Messages (continued) Message Cause Solution Heater Timeout The Transfer Roller was unable to reach its goal temperature. Turn the Printer OFF and ON to reset and try reprinting.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-6 Reviewing LCD Messages (continued) Message Cause Solution Film Sensors are not calibrated. Your film Sensors must be calibrated before the film will align properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-7 Reviewing LCD Messages (continued) Message Cause Solution Head Voltage Error A hardware fault has prevented setting the correct Printhead voltage.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-8 Reviewing LCD Messages (continued) Message Cause Solution Lam Error The Lamination Module requires attention. Check the indicated condition and correct using the Laminator's control buttons.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-9 Reviewing LCD Messages (continued) Message Cause Solution Wrong Lam Type The installe d Lamination material does not match the material required by the print job.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-10 Reviewing LCD Messages (continued) Message Cause Solution Communication Error The Printer is not able to communicate with the host PC.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-11 General Troubleshooting Guide Problem Possible Solution Ribbon Wrinkle Verify the convex Roller (D 860051) is installed correctly with the shorter notch towards the front of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-12 General Troubleshooting Guide (continued) Problem Possible Solution Ribbon Chipping / Reverse Transfer during Printing Print density is set too high.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-13 General Troubleshooting Guide (continued) Problem Possible Solution Printhead cutting Ribbon Verify the solder leads on the Printhead are trimmed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-14 General Troubleshooting Guide (continued) Problem Possible Solution Film won’t queue up Verify the Film Sensor s have been calibrated.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-15 General Troubleshooting Guide (continued) Problem Possible Solution Ribbon Sticking to the Film Increase the Ribbon Tension. See the Adjusting the Ribbon Tension procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-16 Magnetic and E-card Troubleshooting Guide You should use a Magtek Card Reader to troubleshoot with the following chart.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-17 Magnetic and E-card Troubles hooting Guide (continued) Problem Possible Solution Yellow or red readings on only one track Verify wires are not pulling the Magnetic Head to one side.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-18 Printing a Test Image Step Procedure 1 Choose Print Test Image to select a preset test image. ( Note: These images help to determine if the Printer is functioning properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-19 Reviewing the Color/Resin YMCK Self-Test Step Procedure 1 Use this card to determine Image Placement and confirm that (a) the image colors are properly reproduced and (b) the Resin Panel is printing properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-20 Reviewing the Card Count Self-Test Step Procedure 1 Use this card to view counts for Card Count (CC), Pass Count (PC) and Transfer Count (TC).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-21 Reviewing the Lamination Color/Resin YMCK+L Self-Test Step Procedure 1 Use this card to determine Lamination Placement and confirm that (a) the image colors are properly reproduced and (b) the Resin Panel is printing properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-22 Communications Errors Resolving the Communication Errors Symptom(s): Incorrect output, communications error on PC or Printer, stalling, no re sponse from Printer, no job printed, “paper out” error.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-23 4 Determine the problem with printing from the application. a. Print a self-test from the Printer by holding down the Pause button on power up to ensure that the Printer (itself) is functioning properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-24 Card Feeding Errors All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer. Resolving an Unable to Feed Card Error Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-25 Resolving an Unable to Feed Card Error (continued) Step Procedure 2 Check the card quality / loading. a. Remove cards from the Card Hopper.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-26 Resolving an Unable to Feed Card Error Step Procedure 6 Check Hopper Tray Spring Tension. a. Open Card Hopper Cover. b. Using the Fargo Diagnostic utility, send a test print to the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-27 Resolving a Card Not Fed Error (T wo (2) or more card feed at the same time) All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-28 Resolving a Card Not Fed Error (Two (2) or more card feed at the same time) Step Procedure 2 Check card quality / loading. a. Remove cards from the Card Hopper.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-29 Resolving a Card Hopper Empty Error Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-30 Resolving a Card Output Hopper Full Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-31 Resolving a Card Not Fed Error (C ards will not feed off the Hopper) Step Procedure 1 Review the following information. • Symptom: Cards will not feed at all.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-32 Resolving a Card Jam Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer. Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-33 Resolving a Card Jam (Encoder) Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-34 Resolving a Card Jam (Flipper) Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-35 Resolving a Card Jam (Flipper) Error Step Procedure 2 Open the Printer’s Flipper Table Module Cover. a. Clear any cards in the Flipper Table Module by using the Forward and/or Reverse buttons located on the Printer’s Top Cover.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-36 Resolving a Card Jam (Laminator) Error Symptom: The Card Jam: Lam Error is displayed on the LCD. Step Procedure 1 Look for a jammed card in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-37 Resolving a Card Jam (Laminator) Error Step Procedure 3 Test the Card Detection Sensor (D840624). a. Remove the rear cover. b. Using a Digital voltmeter, connect the negative lead to ground.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-38 Resolving a Card Eject Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer. Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-39 Resolving a No Flipper Table Module Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-40 Resolving a Flipper Jam Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer. Step Procedure 1 Review the following information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-41 Resolving a Flipper Jam Error Step Procedure 2 Open the Printer’s Flipper Table Module Cover. a. Clear any cards in the Flipper Table Module by using the Forward and/or Reverse buttons located on the Printer’s Top Cover.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-42 Magnetic Encoding Errors Resolving a Magnetic Verify Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-43 Resolving a Magnetic Verify Error Step Procedure 2 Check to ensure that the cards are loaded properly, as follows: The Magnetic Stripe should be down and away from the front.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-44 Resolving a Magnetic Verify Error Step Procedure 6 Verify that the coercivity of the cards matches the Driver Settings.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-45 Resolving a No Magnetic Encoder Installed Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-46 Resolving a No Magnetic Encoder Installed Error Step Procedure 2 Press the Cancel Print button on the Driver Monitor Error Display Message.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-47 Resolving a No Magnetic Strip Present Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-48 E-card Encoding Errors Resolving a No Smart Card Encoder Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-49 Resolving a No Prox Card Encoder Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-50 Transfer Process Errors Resolving a Transfer Film Mark Not Found Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-51 Resolving a Transfer Film Not Installed Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-52 Resolving a Transfer Film Sensor Not Calibrated Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-53 Resolving a Transfer Film Out Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-54 Printing Process Errors Resolving a Ribbon Sensor Error (Ribbon Miscue) All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-55 Resolving a Ribbon Sensor Error (Ribbon Miscue) Step Procedure 2 Open the front cover and remove the Ribbon. a. Check that the Ribbon is in good condition and not wrinkled or broken.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-56 Resolving a Ribbon Break/Jam Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-57 Resolving a Ribbon Break/Jam Error (continued) Step Procedure 2 Open the front cover and remove the Ribbon. • If Ribbon is broken, continue to Step 3.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-58 Resolving a Ribbon Out Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer. Step Procedure 1 Review the f ollowing information.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-59 Resolving a No Ribbon Installed Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-60 Resolving a No Ribbon Installed Error Step Procedure 2 Verify that a Ribbon is installed in the Printer. a. Press on the Resume button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-61 Resolving a Invalid Ribbon Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-62 Resolving a Invalid Ribbon Error Step Procedure 2 Verify that the Ribbon installed is designed for the correct Printer model. 3 Press on the Resume button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-63 Resolving a Wrong Ribbon Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-64 Resolving a Wrong Ribbon Error Step Procedure 2 Verify the Driver settings are correct. a. Open the Printer Control Panel from the Computer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-65 Resolving a Headlift Motor or Sensor Error All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-66 Resolving a Headlift Mo tor or Sensor Error Step Procedure 3 Reboot the Printer by cycling the power. 4 Cycle the Headlift Motors. a. Use the Fargo Diagnostic utility to cycle the Printhead to ensure proper printhead operation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-67 Resolving the Cover Open Error Message All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-68 Resolving the Cover Open Error Message Step Procedure 2 Check for debris, as follows: a. Open the front cover and check that no debris has accumulated in the lid Sensor opening.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-69 Resolving the Blank Output issues All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-70 Resolving the Blank Out put issues (continued) Step Procedure 4 Adjust the placement. a. Reset the Printer to clear any Error Messages by removing the power and reapplying it.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-71 Resolving the Blank Output issues Step Procedure 6 Ensure that the proper voltage is being applied to the Printhead. a. Remove the back cover.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-72 Card Lamination Errors Resolving a Laminator (General Error) Step Procedure 1 Review the following information. • Symptom: The Laminator has reported a general fault.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-73 Resolving the Laminator (Check Power) Error Step Procedure 1 Review the following information. • Symptom: The Laminator’s power is OFF.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-74 Resolving the Laminator (Heater Off) Error Step Procedure 1 Review the following information. • Symptom: The Laminator’s Heater is OFF.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-75 Resolving the Wrong Overlaminate Installed Error Step Procedure 1 Review the following information. • Symptom: An incorrect Overlaminate has been installed, or a Driver setting is incorrect.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-76 Resolving Check Lamination Material Error Step Procedure 1 Review the following information. • Symptom: An incorrect Overlaminate has been installed, or a Driver setting is incorrect.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-77 Diagnosing Image Problems Resolving the Pixel Failure problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-78 Resolving the Card Surface Debris problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-79 Resolving the Incorrect Image Darkness problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-80 Resolving the Incorrect Image Darkness problems (continued) Step Procedure 3 Adjust the Dye-Sub Intensity setting within the Image Color tab of the Printer Driver.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-81 Resolving the Incorrect Image Darkness problems (continued) Step Procedure 4 Correct the Image Darkness . See the Adjusting the Image Darkness procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-82 Resolving the Ribbon Wrinkle problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-83 Resolving the Ribbon Wrinkle problems Step Procedure 4 Reduce the Image Darkness.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-84 Resolving the Excessive R esin Printing problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-85 Resolving the Excessive Resin Printing problems (continued) All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-86 Resolving the Excessive Resin Printing problems Step Procedure 3 Reduce the Image Darkness. See the Adjusting the Image Darkness procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-87 Resolving the Incomplete Resin Printing problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-88 Resolving the Incomplete Resi n Printing problems (continued) Display B – See Pro.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-89 Resolving the Image Placement problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-90 Resolving the Image Placem ent problems (continued) Step Procedure 2 Verify if the Image Position option within the Image Transfer tab is set correctly or incorrectly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-91 Resolving the Image Placem ent problems (continued) Step Procedure 3 Verify if the Horizontal Image Position Setting is set correctly or incorrectly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-92 Resolving the Image Placement problems Step Procedure 4 Verify if the Vertical Image Position Setting is set correctly or incorrectly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-93 Resolving the Poor Image Quality problems All Troubleshooting procedures assume that onl y factory-authorized supplies are in use in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-94 Running the Self Test Perform a self-test after (a) an initial setup of the Printer, (b) a calibration procedure has been conducted, or (c) a part has been replaced to check for proper Printer operation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-95 Running the Standard Self Test Print Display A - Full Color Test Print.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 4-96 Running the Magnetic Se lf Test (HiCo Only) Perform a self-test after (a) an initial setup of the Printer, (b) a calibration procedure has been conducted, or (c) a part has been replaced to check for proper Printer operation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-1 Section 5: Ethernet Option Section Introduction The Ethernet option includes the Ethernet port and the internal Printer Server.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-2 Functional Specification - Ethernet Option The Fargo Ethernet option includes these features. Feature Description Simultaneous Printing Provides the ability to simultaneously print from multiple PCs to the network Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-3 Network Services - Overview The Ethernet option provides the services described in this section. ( Note: Other additional services include a Ping client, address assi gnment and Printer discovery functions.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-4 Network Management Interface The SNMP interface is described below. Interface Description SNMP • The Ethernet interface is a fully-manageable SNMP agent that supports MIB-II.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-5 Reviewing the Telnet Command Table The following table describes available Telnet commands. ( Note: You can enter partial full- word commands: the Printer will respond with additional help.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-6 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format all Display all information about this Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-7 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format lpq Display information about print jobs and their settings.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-8 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format contact Set the contact string. set sysinfo contact [<STRING>] location Set the location string.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-9 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format add Add a new User definition. Up to four (4) Users may be defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-10 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format addr Store a new IP address. store net addr <ADDRESS> mask Store a new address mask.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-11 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format save Save all current settings as the stored settings in the permanent memory.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-12 Logging In When a User attempts to change any setting, they are asked for a User name and password. ( Note: The Guest Users can only view settings.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-13 Accessing the Home pages Step Procedure 1 Open a window for your network browser application on your local PC. 2 Find the IP address of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-14 Reviewing the HDP600 Home Page.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-15 Reviewing the Home Page Categories and Fields (table) You can view these categories and fields in the following table. Category Field Purpose Serial Number (Print Server) Displays the unique fixed serial number of the Print Server.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-16 Configuring the Network Settings The procedures needed to configure the network settings are presented in this se ction.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-17 Reviewing the Interface The Interface display indicates the network speed supported by the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-18 Reviewing the Current Settings The Current Settings page section displays the current active network settings for the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-19 Switching to the automatic IP address mode Step Procedure 1 Select the Network link from any web page of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-20 Changing to the static IP address mode Step Procedure 1 Select the Network link from any web page of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-21 Changing to the static IP address mode (continued) Step Procedure 7 Log in as a root User if you are so prompted. ( Note: Any change of setting will only be accepted after you have successfully logged in.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-22 Entering the TCP Window Size Step Procedure 1 Select the Network link from any web page of the Printer. 2 Select the TCP window size from the drop-down menu, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-23 Using the Clear Changes button Step Procedure 1 Click on the Clear Changes button to delete the information in the textboxes in Stored Settings area.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-24 Using the TCP/IP page The TCP/IP page displays the TCP/IP Status of each Printer connection, which are not configurable. See the next two pages for displays.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-25 Using the TCP/IP Status Web Page See the Using the TCP/IP page procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-26 Using the Printer page You can use the Printer page to review current information about the Printer device settings and print jobs.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-27 Reviewing the Printer page (continued) See the previous page for descriptions of the fields.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-28 Using the System Log page The System Log page displays the current system log settings and allows the User to change the settings. ( Note: These settings configure how system logging occurs.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-29 Changing the Log Name By default the names are log1 and log2. However, you can rename them from this page. ( Note: This also updates the link to the correspo nding web page.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-30 Changing the Log Name (continued) Step Procedure 2 Select the link for the log name you want to view or configure (the default choices are log1 or log2 ).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-31 Selecting the Log Type Step Procedure 1 Select the Sy stem Log link. See the next page. 2 Select the link for the log name you want to view or configure (the default choices are log1 or log2 ).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-32 Selecting the Log Destination Specify one destination for the log.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-33 Setting up Email Event logging Follow this procedure to enable logging using email notification: Step Procedure (Specify email logging) 1 Select the Sy stem Log link.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-34 Specifying UDP Event logging Follow this procedure to enable logging to a UDP Syslog program. Step Procedure 1 Select the Sy stem Log link.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-35 Specifying UDP Event logging (continued) Step Procedure 5 Select Submit . 6 Log in as a root User if you are so prompted. ( Note: Any change of setting will only be accepted after you have successfully logged in.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-36 Specifying TCP Event logging Follow this procedure to send logging messages to a pre-existing IP connection made on the TCP port. Step Procedure 1 Select the Sy stem Log link.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-37 Specifying TCP Event logging (continued) Step Procedure 3 Select the TCP Connection radio button. 4 Select Submit . 5 Log in as a root User if you are so prompted.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-38 Using the Administration pages The purpose of the Administration pages is to allow the User to upgrade, reboot, modify passwords and enter User-specified system information strings.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-39 Using the System Information page (continued) Step Procedure 5 Select the Submit button. 6 Log in as a root User if you are so prompted.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-40 Changing the Root Password The Passwords page allows the User to change the passwords needed to log in as a User. Changes to all settings require a login.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-41 Changing the Root Password (continued) Step Procedure 7 Select the Submit button. 8 Log in as a r oot User (using the old password) if you are so prompted.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-42 Upgrading the Print Server This procedure provides a means to upgrade the Firmware in the Printer Server not the main Printer. Step Procedure 1 Select the Administration link.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-43 Upgrading the DTC400 and HDP600 Print Server (continued) Step Procedure 6 Select the Upgrade button to start the Firmware upload. 7 Select Reboot when requested.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-44 Using the Reboot pages Rebooting the DTC400 and HDP600 restarts only the Ethernet Print Server. Rebooting the Ethernet Server The Reboot page allows the User to restart the Ethernet Print Server.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-45 Rebooting the Ethernet Server (continued) Step Procedure 5 Click Yes when prompted. 6 Wait for the Printer to reboot and display the home page.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-46 Resetting to Default Settings The Reboot page also allows the User to reboot the Ethernet Print Server into a default settings mode.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-47 Using the Help page The Help page displays the Help information. Step Procedure 1 Open this web page at the appropriate location by clicking on the Help book icon at the top of each page.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-48 Additional Procedures Reviewing LED and Dipswitch Tables The LEDs and dipswitches can be found on the back of Printe rs. Reviewing the LED Table LED HDP600 position Flash Rate Indicates On once per second (i.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-49 Reviewing the Dip Switches For the DTC400, ON means a Dipswitch is down and OFF means a Dipswitch is up. For the HDP600, ON means a Dipswitch is to the left and OFF means a Dipswitch is to the right.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-50 Restoring the Factory Settings for Ethernet There may be times when you are unable to use the current configuration of the Ethernet interface.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-51 Accessing the IP address of your Printer The additional LCD menus for Ethernet-enabled Printers are provided to view the IP address of the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-52 Upgrading the Main Firmware with the Fargo Diagnostics Utility The Printer Server Firmware upgrades for the DTC400/HDP600 are done from the Upgrade web page for the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-53 Upgrading the Main Firmwa re with the Fargo Diagnos tics Utility (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-54 Ethernet Printer Troubleshooting Pr ocedures Troubleshooting procedures If you are having trouble connecting to your Ethernet Printer or printing to it, you should go through each of the following procedures.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-55 Verifying the Printer Connection Step Procedure 1 Ensure that your Printer has a valid network connection. 3 Verify that the Printer has both LEDs blinking on and off with network activity.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-56 Verifying that y our PC can access the Printer using the ping command Step Procedure 1 Follow these instructions to issue a ping command to the Printer: At a DOS prompt, enter ping [IP Address] Example: C:>ping 210.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-57 Verifying that your PC can access the Printer using the ping command (continued) Step Procedure 2 Verify that the PC and the Printer are connected to the same network.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-58 Reviewing Frequently-asked Questions Question Answer How do I know if my Printer ha.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-59 Reviewing Frequently-asked Questions (continued) Question Answer How can I find the IP address of my Ethernet Printer? You can find it in the LCD of the Printer if the Ethernet option is functioning properly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-60 Reviewing Frequently-asked Questions (continued) Question Answer Can I use Fargo IP-Tracer to locate Printers on a different network segment? No.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-61 Reviewing Frequently-asked Questions (continued) Question Answer What if I lose the password for my Printer or it is not accepted? See Reviewing the Dip Switches .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-62 Reviewing Frequently-asked Questions (continued) Question Answer How can I verify/change what IP address my installed Printer Driver is expecting to find my Printer? Follow this procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-63 Reviewing Frequently-asked Questions (continued) Question Answer How do I choose a static IP address for my Ethernet Printer? You can use the web pages if you know the current IP address.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-64 Glossary of Terms Term Purpose MAC (Media Access Control) The unique numeric value address associated with a network device that gives the device a unique identity.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 5-65 Glossary of Terms (continued) Term Purpose SNMP (Simple Network Management Protocol) This is protocol for the network management services.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 6-1 Section 6: Card Lamination Module Important: The procedures in this section apply for the HDP600-LC and HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 6-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 6-3 Opening the Card Lamination Module Step Procedure 1 Open the Top Cover of the Lamination Module by lifting up on its bottom edge and tilting it back into its fully open position.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 6-4 Opening the Card Lamina tion Module (continued) Step Procedure 2 Open the Lamination Station by lifting up on the blue Securing Latches.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 6-5 Adjusting the Card Lamination Module The HDP600 supports the attachment of an optional Card Lamination Module.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-1 Section 7: Printer Adjustment s Important: The HDP600 CR100/HDP600-LC CR100 Printers have their ow n Printer Driver. However, the majority of the procedures in this section apply for all HDP600 Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-3 IMPORTANT! Fargo Card Printers require highly specialized Print Ribbons to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Supplies.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-4 Printing on Alternate Card stocks Selecting the Right Cards and optimize the HDP Pri.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-5 Selecting the Appropriate HDP Printer Driver settings Fargo offers two types of PVC cards: glossy UltraCard III™ cards and matte-finished HDP- PVC Cards.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-6 Conducting the Tape adhesion Test It is important to conduct Tape adhesion tests because Farg o cannot be certain which transfer temperature and Dwell Time will work best (when printing cards other than UltraCard III or HDP-PVC).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-7 FA IL: Significant transfer to ta p e PASS: Very slight transfer to ta p e PASS: Abs.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-8 Conducting the Tape adhesion Test (continued) Step Procedure 4 Visually examine the card and the strip of tape pulled from the card, to see if any portion of the HDP Film was removed from the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-9 Printer Driver Options Installing Printer Driver Updates Occasionally, new Printer Driver versions ar e released which have new or updated features.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-10 Setting Up the Printer Driver Once the appropriate Printer Driver for the computer has been installed, you will need to set the Driver up with the proper print options.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-11 Using the Card tab Using the Card tab (HDP600/HDP600-LC) Use this option to control specific Printer functions.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-12 Selecting the Card Size (HDP600 and HDP600-LC) Step Procedure 1 Select the appropriate card option: • CR-80: This selection is the default form size fo r the HDP600.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-13 Selecting the Card Size (HDP 600 and HDP600-LC) (continued) See three previous procedures.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-14 Selecting the Custom Card Size Select the appropriate custom card size acco rding to the dimensions of the card stock. Step Procedure 1 a.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-15 Using the Card tab (HDP600 CR100/HDP600-LC CR100) Step Procedure 1 Select the appropriate card size option from two (2) standard card sizes.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-16 Selecting the Card Type (all HDP600 Printers) Select the appropriate card type according to the composition of the card stock.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-17 Selecting the Card Type (continued) Step Procedure 2 If using a card stock other than listed, use the Custom 1 and Custom 2 options to save custom Dwell Time and dwell temperature controls on the Image Transfer tab.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-18 Selecting the Card Type.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-19 Selecting the Card Hopper (HDP600 and HDP600-LC only) Selects the appropriate Card Hopper Step Procedure 1 a. Select First Available to print from the hopper currently selected as indicated on the Printer's LCD.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-20 Selecting the Card Hopper (HDP600 CR100 and HDP600-LC CR100 only) There is only one (1) Input Hopper for one hundred (100) CR100 cards.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-21 Setting the Orientation Select either the Portrait or Landscape radio buttons for Orientation. Step Procedure 1 Select Portrait to cause the card to print in a vertical orientation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-22 Selecting the Diagnostics button This will launch the Diagnostic too l (if installed).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-23 Selecting the Test Print button When selected a file will be copied down to the Printer. This f ile will print a Full Color plus Resin print on the front side of the card and a Resin or black only image on the backside.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-24 Selecting the About button Select the About button to open a dialog box containing the copyright information as well as the driver’s version number and date code.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-25 Selecting the About button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-26 Using the Device Options tab (HDP600/HDP600-LC) The HDP600 Printing Preferences window is used throughout this section for consistency within this document.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-27 Adjusting the Ribbon Type Use the Ribbon Type dropdown menu to match Ribbon type. Step Procedure 1 Adjust to match the Ribbon Type selection with the Ribbon type that is loaded in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-28 Selecting the Auto Ribbon Select option Step Description 1 Click on the Auto Ribbon Select button to verify that the Ribbon type selected matches the Ribbon installed in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-29 Adjusting the Film Type Step Procedure 1 Allows you to select the film type option that is appropriate for the type of HDP film currently loaded in the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-30 Adjusting for the Color Matching Allows selection of the color matching option that best fits the requirements of the print job.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-31 Adjusting for the Color Tone – Natural or Enhanced Select the appropriate Step Procedure 1 This will allow the selection between two different color levels.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-32 Adjusting for the Resin Dither Select the appropriate dither method according to the type of image to be printed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-33 Using the Print Both Sides option Use this option to automatically print on both the front and backside of a card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-34 Using the Split 1 Set of Ribbon Panels option Use this option to provide the most economical means of printing a dual-sided card since a single set of Ribbon Panels will be split to print both the front and backsides of a card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-35 Using the Print Back Side First option Step Procedure 1 Select this option: If you need to print the first page of a two-page document on the backside of the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-36 Using the Print Back Side Only option Use this option to print only onto the backside of cards.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-37 Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options Use this option to change the position of the printed image in relation to the set locat ion of a card's Magnetic Stripe or smart chip.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-38 Using the Print in Single Card Mode option Use this option to force the Printer's memory to buffer or to hold only one print job at a time.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-39 Using the Disable Printing option Use this option to disable the printing capabilitie s of the Printer while still allowing the Printer to encode cards.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-40 Using the Image Color tab (HDP600) Use this tab to adjust color properties. ( Note: The HDP600 CR100 Printing Preferences window has the same Image Color tab functionality as the HDP600 Printing Preferences window.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-41 Using the Image Color tab (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-42 Using the Image Color tab (continued) Step Procedure 2 Select the None or Monitor option (see the Device Options tab, shown below) to only display the Dye-Sub Intensity and Resin Heat sliders.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-43 Using the Image Color tab (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-44 Using the Image Color tab (continued) Step Procedure 4 Control the amount of heat the Printer uses when printing with the resin black Panel by adjusting the Resin Heat slide.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-45 Using the Image Color tab Step Procedure 5 As needed, return all options to their factory settings by clicking on the Default button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-46 Using the Image Transfer tab Use this tab to adjust the Image Position , Transfer Dwell Time and Transfer Temperature .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-47 Adjusting the Image Position controls Use the Image Position controls to position the image on a card (to be adjusted). Step Procedure 1 Adjust the Image Position values by clicking on the Vertical and Horizontal adjustment arrows.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-48 The display (below) represents how the printed image will move in relati on to the fixed card position as positive and negative image placement values are entered.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-49 Adjusting the Transfer Dwell Time and Temperature Use the Image Transfer option to control of the Transfer Dwell Time and Transfer Temperature .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-50 Using the K Panel Resin tab Use this tab to adjust the CR-80 Card Size, the Direction the Card Travels through t he Printer, the Print All Black With K Panel (options) and the Defined Areas.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-51 Selecting the Full Card with the K Panel Resin tab Step Procedure 1 Select the Full Card option to print the resin black (K) Panel for all black found within all areas of the image, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-52 Selecting the Defined Area(s) wi th the K Panel Resin tab Step Procedure 1 Select the Defined Area(s) option to print the resin black (K) Panel for all black found only in an area or areas defined, as shown belo w.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-53 Selecting the Undefined Area(s) with the K Panel Resin tab Step Procedure 1 Select the Undefined Area(s) option to print the resin black (K) Panel for all black found only in the space outside the areas defined, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-54 Defining the Area to acti vate the Card Grid Step Procedure 1 Select on the appropriate Defined Area (see below) to activate the card grid in the upper half of the window.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-55 Measuring the Total Card area Step Procedure 1 Determine the area of the card to define. ( Note: This area is indicated by the dashed outline, as shown below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-56 Measuring the Area to be positioned on the Card Step Procedure 1 Once the area is sized properly, measure the location where this area is to be positioned on the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-57 Selecting the Print YMC under th e K and Print K Only options Step Procedure 1 Use the Defined Area function. a. Define an area by clicking on the Defined Area UP arrow.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-58 Selecting the Print YMC under the K and Print K Only options.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-59 Using the Magnetic Encoding tab Use these options only if the Printer has an optional Magnetic Stripe Encoding Module installed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-60 Using the Encoding Mode option Use the Encoding Mode option to specify which magnetic encoding standard to use. • The HDP Card Printer can be installed with one of two types of factory-installed Magnetic Stripe Encoding Modules.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-61 Using the Encoding Mode option (continued) Step Procedure 1 Select the ISO Standard Encoding Module with a dual-coercivity (high or low) encoding head.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-62 Encoding the Mode / Coercivity / Magnetic Track Selection Use the ISO option for encoding capability for either high- or low-coercivit y cards on tracks 1, 2 and 3 and is the industry's standard mode of magnetic encoding.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-63 Encoding the Mode/Coercivity/Magne tic Track Selection (continued) Use the ISO opti.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-64 Reviewing the Magnetic Track Options Use these options to customize the ISO encoded data format for each of the Magnetic Stripe's three tracks.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-65 Reviewing the Enable MLE Support checkbox Multi-Language Extension (MLE) support in Windows XP can cause text strings to be broken up into fragments.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-66 Reviewing the Verification options Use this option, which instructs the Printer to verify that all magnetic data has been co rrectly encoded on each card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-67 Reviewing the Shift Data Left Use the Shift Data Left option, which applies to all tracks when selected.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-68 Reviewing the ISO Track Locations The magnetic Encoding Module encodes onto tracks in acco rdance with an ISO 7811-2 Magnetic Stripe. For track locations, review the display below .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-69 Sending the Track Information Magnetic track data is sent in the form of text strings from the application software to the Printer Driver.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-70 Reviewing the Sample String • Track 1: ~1%JULIEANDERSON^1234567890? • Track 2: .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-71 Reviewing the ASCII Code and Character Table ASCII Code Character A SCII Code Char .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-72 Using the Lamination tab (only with Card Lamination Module) Use this option to control specific Printer f unctions. These options allow you to control the Printer's Lamination process.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-73 Selecting the Lamination Position Step Procedure 1 The Lamination Position control allows you to adjust the horizontal positio n of the PolyGuard Overlaminate.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-74 Selecting the Lamination Side Step Procedure 1 a. Select the No Lamination option if you do not want to use the Printer's built-in Laminator.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-75 Selecting the Lamination Type Step Procedure 1 Select one of the Lamination Type options, according to which type of Lamination media is currently install ed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-76 Adjusting the Transfer Dwell Time and Transfer Temperature Step Procedure 1 Adjust .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 7-77 Selecting the Sensors bu tton and Defaults button Step Procedure 1 Select the Lamination Tab's Sensors button to display options for calibrating the Card Lamination Module’s Lamination Sensor.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-1 Section 8: Cleaning Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-3 Cleaning inside the Printer Step Procedure 1 Open the Lamination Arm. 2 Remove the Print Ribbon and HDP Film from the Printer. 3 If you have a can of compressed air, blow out all visible areas of the Printer interior.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-4 Cleaning the Printhead Clean the Printhead every time the Print Ribbon is changed to maintain consistent print quality, as instructed below.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-5 Replacing the Card Cleaning Tape Caution: Replace the Card Cleaning Tape approximately every 2,000 to 3,000 prints , depending on the cleanliness of the card stock or the environment in which the Printer is located.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-6 See the previous procedure in this section.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-7 Cleaning the Magnetic Encoder Step Procedure 1 Open the Top Cover and remove the Ribbon. 2 a. Locate the Flipper Table in the Input Module.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-8 Cleaning the Magnetic Encoder (continued) Step Procedure 6 Press the REV button on the LCD display seven (7) times to feed the card into the Magnetic Module.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-9 Cleaning the Platen and Transfer Rollers Step Procedure 1 Leave the Printer power ON and open the Lamination Arm.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 8-10 Cleaning the Transfer Rollers using the Cleaning Card Step Procedure 1 Leave the Printer power ON and open the Lamination Arm.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 9-11 Section 9: Packing the Card Printer Important: The procedure in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-1 Section 10: Board Level Diagnostics Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-2 Resolving the DRAM Memory Error Symptom: An error has occurred in the removable memory Module (SIMM). ( Note: The LCD will state the following: Main Memory Error.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-3 Resolving the FPGA Error Symptom: An unexpected hardware error has occurred. Step Procedure 1 Reboot the Printer. 2 If the problem persists, the Main Print Board will need to be replaced.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-4 Reviewing the Sensor Locations and Voltages Sensor or Switch Location Low Range (VDC) High Range (VDC) Ribbon Supply Encoder D860095 J4 pin 12 Unblocked (.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-5 Reviewing the Sensor Locations and Voltages (continued) Ribbon Mark Sensor 5 D860112 J9 pin 3 Blocked (.8 or lower) Unblocked +4 Mag Card Sensor D860191 J6 pin 8 Covered (.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 10-6 Reviewing the Motor Locations and Cables Motor Cable Location Flipper Table Motor (.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-1 Section 11: LCD On-Line Menu Navigation Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-2 Display A – HDP600 CR-100 Menu Tree (presented in below) Part 1 of 4.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-3 Selecting from the HDP600 Menu Op tion Structure Tree (continued) Display A – HDP.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-4 Selecting from the HDP600 Menu Op tion Structure Tree (continued) Display A – HDP.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-5 Selecting from the HDP600 Menu Option Structure Tree Display A – HDP600 CR-100 Me.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-6 Reviewing the Printer Setup The Printer parameters found in Setup Printer are preset at the factory and should not need to be changed unless an issue develops.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-7 Reviewing the Printer Setup (continued) Step Procedure 3 Be sure to run this test after each adjustment. Run the Alignment Test Image by selecting the following options: MENU , PRINT TEST IMAGE and ALIGNMENT TEST .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-8 Preparing to Adjust the Print Offset, Transfer TOF and Transfer EOF Step Procedure 1 Before starting the alignment procedures, you must first establish a baseline from which to start the adjustments.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-9 Aligning the Print Offset This procedure positions the image correctly on the HDP Film. Refer to the Preparing to adjust the Print Offset, Transfer TOF and Transfer EOF procedure for proper sequen ce.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-10 Aligning the Print Offset (continued) Step Procedure 6 Proceed to Adjusting Transfer TOF to center the image on the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-11 Setting the Transfer TOF This procedure positions the HDP Film correctly on the leading edge of the card. Refer to the Preparing to adjust the Print Offset, Transfer TOF and Transfer EOF procedure for proper sequence.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-12 Setting the Transfer TOF (continued) Step Procedure 5 Proceed to Adjusting Transfer EOF to center the image on the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-13 Setting the Transfer EOF This procedure controls the point on the card at which the Transfer Roller lifts and ceases transfer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-14 Setting the Transfer EOF (continued) Step Procedure 3 Determine the amount of Transfer EOF adjustment needed by using a caliper to measure the “Gap”.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-15 Using the Gap Distance Table.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-16 Using the Gap Distance Table (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-17 Using the Gap Distance Table (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-18 Adjusting the Transfer Tension This procedure positions the image correctly on the card. Refer to the Preparing to a djust the Print Offset, Transfer TOF and Transfer EOF procedure for proper sequence.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-19 Adjusting the Film Drive The Film Drive sets the baseline for the Film Tension and should not be adjusted by the reseller or the end user.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-20 Adjusting the Ribbon Drive The Ribbon Drive sets the baseline for the Ribbon Tension and should not be adjusted by the reseller or end user.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-21 Adjusting the Transfer Speed The Transfer Speed sets the baseline for the rate of image transfer and should not be adjusted by the reseller or end user.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-22 Adjusting the Image Darkness Step Procedure 1 Choose ME NU , Print Test Image and Alignment Test to print a test card. 2 Examine the test card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-23 Changing the Encoder Settings Make this selection to modify the Encoder settings. These settings would need to be changed (a) if the Print Board is replaced or (b) if the Printer is upgraded to include a n Encoder.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-24 Setting the Magnetic TOF Use this setting to position the magnetic data at the correct distance from the leading edge of the card. • The Magnetic TOF is the distance from the edge of the card to the Start Sentinel (SS).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-25 Setting the Magnetic TOF (continued) Use this setting to position the magnetic data at the correct distance from the leading edge of the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-26 Setting the Magnetic TOF Step Procedure 7 Press Save to save the value. 8 Test the position of the Start Senti nel by magnetically encoding a card and checking as described in Step 1 in this same procedure.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-27 Adjusting the Flipper Offset Step Procedure 1 Select MENU, Setup Printer and Flipper Offset. 2 Change the setting in small increments if the card is not feeding correctly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-28 Adjusting the Lamination Flipper Offset Step Procedure 1 Select MENU, Setup Printer and Flipper Offset or Inverted Offset. 2 Change the setting in small increments if the card is not feeding or Flipping correctly.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-29 Adjusting the LAM TOF and EOF Step Procedure 1 Applies only if the Printer is equipped with the Card Lamination Module. • Use this control to align the PolyGuard Overlaminate patch on the card.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-30 Adjusting the Lamination Sensor Calibration Step Procedure 1 Applies only if the Printer is equipped with the Card Lamination Module.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-31 Using the Show Card Count option Step Procedure 1 Use this option to view the total Card Count (CC), Pass Count (PC), Transfer Count (TC) .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 11-32 System Upgrade (Firmware Upgrade) This option is used to upgrade the Printer Firmware. Step Procedure 1 Upgrade by selecting SYSTEM UPGRADE .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-1 Section 12: Firmware Up dates Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-2 Firmware Updater Applicat ion Program (continued) The Firmware Updater application program is the software required to send Firmware updates from the computer to the Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-3 Downloading Firmware Updates Step Procedure 1 Refer to the following steps to download Firmware updates: 2 Select the Download Firmware button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-4 Updating the Printer's Firmware Now that you have installed and opened the Firmware Updater program and downloaded the Firmware update file, you can begin updating your Printer's Firmware.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-5 Updating the Main Firmware (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-6 Updating the Main Firmware (continued) Step Procedure 8 Wait: The Firmware update will now take a few minutes. Check the Printer's LCD for the status.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-7 Updating the LCD Firmware Step Procedure 1 Make sure the Printer is powered ON, connected to the PC and in its READY mode. 2 From the Firmware Updater program, click on the Select Update File button.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 12-8 Updating the LCD Firmware (continued).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 13-1 Section 13: Fargo T echnical Support Important: The procedures in this section apply for the HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100 Card Printers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 13-2 Reading the Serial Numbers on a Fargo Printer The purpose of this section is to provide updated instructions for reading serial numbers on a Fargo Printer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 14-1 Section 14: Reviewing S p are Part s List s Reviewing Spare Parts List for HDP600, .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-1 Section 15: Glossary of T erms Term Definition 24-bit color A color depth for an image that uses 8 bits for each color (red , blue, green) combining the possible 256 shades to provide a color depth of 16.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-2 Glossary of Terms (continued) Term Definition Barcodes A series of alternating blac.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-3 Glossary of Terms (continued) Term Definition Cache A type of memory Buffer to store data temporarily, used to hold information that is most often exchanged between controller and peripheral, to expedite data transfer.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-4 Glossary of Terms (continued) Term Definition CR-79 A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W, +/-0.005 L) or 52.400 X 84.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-5 Glossary of Terms (continued) Term Definition Direct-to-Card (DTC) Printing The Direct-to-Card printing process prints digital images directly onto any plastic card with a smooth, clean, glossy PVC surface.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-6 Glossary of Terms (continued) Term Definition Dwell Time The speed at which the card moves across the Transfer and Lamination Roller, measured in seconds/inch (sec/in).
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-7 Glossary of Terms (continued) Term Definition Encoder (wheel) An electromechanical device, attached to a shaft that detects the change in rotational position, incremented to count ticks per revolution.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-8 Glossary of Terms (continued) Term Definition Flash Memory A microchip based non-volatile memory device that holds its data when power is removed.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-9 Glossary of Terms (continued) Term Definition Hard Drive A high capacity storage device in a PC consisting of non- removable magnetically encodable platters.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-10 Glossary of Terms (continued) Term Definition IEEE 1284 (Institute of Electrical and Electronics Engineers 1284) A standard method of signaling for a bi-directional parallel interface on personal computers.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-11 Glossary of Terms (continued) Term Definition Landscape A document layout that is viewed with the document's long axis in a horizontal orientation.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-12 Glossary of Terms (continued) Term Definition MB (Megabyte) A unit of storage that equals 1,048,576 bytes. Memory A generic term for any device that stores digital information using magnetic media or digital chip storage device.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-13 Glossary of Terms (continued) Term Definition Oversized Cards Oversized cards are used for more efficient visual identification and are available in many non-standard sizes.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-14 Glossary of Terms (continued) Term Definition Pinch Roller A free spinning (non-driven) Roller that presses t he card against the drive Roller, on the opposite side, to ensure an adequate normal force for proper traction.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-15 Glossary of Terms (continued) Term Definition Printhead The device on a Printer that produces the image on the media. PVC Abbreviation for polyvinyl chloride, often called vinyl.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-16 Glossary of Terms (continued) Term Definition Resolution The number of individual pixels in a graphic, taken over a given length, used to indicate the sharpness of the picture and the level of detail.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-17 Glossary of Terms (continued) Term Definition Saturation A measure of the degree of color, from gray, with the same brightness.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-18 Glossary of Terms (continued) Term Definition Spooling Rather than moving a print .
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-19 Glossary of Terms (continued) Term Definition Thermocouple A device for measuring temperature using a junction of two wires of dissimilar metals that produce a voltage when heated that varies proportionally with the temperature.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 15-20 Glossary of Terms (continued) Term Definition UPS (Un-interruptible Power Supply) An AC powe r supply, typically powered by batteries, which provides temporary power to the PC or Printer during an interruption of the supply voltage.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-1 Section 16: Index A About button, 7-24 absolute failure, 7-8 AC - Alternating Curre.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-2 Contrast, 15-3 Contrast / Gamma , 7-42 Control panel, 15-3 Copies, 7-21 copyright/v.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-3 Firmware Updater Applicat ion Program, 12-1, 12 -2 Firmware Updater dialog, 12-4 Fi.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-4 Lam Memory Error, 4-8 Lam Pass Thru Error, 4-8 Lamination, 4-36, 15-10 Lamination A.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-5 poor image quality problems, 4-91, 4-92 Port, 15-14 Portrait, 15-14 Portrait/Landsc.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-6 S safety issues, 1-2, 2-1, 3-1, 6-2, 7-2, 8-2 Safety Standards, 2-5 Saturation, 15-.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-7 Using the Image Color tab , 4-87 V Verification, 7-66 Verify data encoded, 4-43 Ver.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP600 High Definition Card Printe r/Encoder User G uide (Rev. 2.5) 16-1.
RESTRICTED USE ONLY Fargo Electronics, Inc. Appendix A: FCC Rules and Environmental Protection FCC Rules This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Ein wichtiger Punkt beim Kauf des Geräts FARGO electronic HDP600-LC CR100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie FARGO electronic HDP600-LC CR100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für FARGO electronic HDP600-LC CR100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von FARGO electronic HDP600-LC CR100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über FARGO electronic HDP600-LC CR100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon FARGO electronic HDP600-LC CR100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von FARGO electronic HDP600-LC CR100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit FARGO electronic HDP600-LC CR100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei FARGO electronic HDP600-LC CR100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
