Benutzeranleitung / Produktwartung CAM/CMOS-2K.LS des Produzenten Fairchild
Zur Seite of 42
OWL CAMERA SERIES CAM/CMOS-2K.LS ULTRA-HIGH PERFORMANCE Line Scan Camera Camera User’s Manual Models RDI & MRDI.
EMC Conformance This equipment has been tested and found to comp ly with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
FAIRCHILD IMAGING OWL CAMERA SERIES USERS MANUAL The CAM/CMOS-2K.LS Line Scan Camera Rev B © 2004 Fairchild Imaging, Inc. Fairchild Imaging, Inc. 1801 McCarthy Blvd. Milpitas CA 95035 USA 1-800-325-6975 www.fairchildimaging.com PRELIMINARY DOCUMENT The information in this manual is preliminary.
Table of Contents SECTION 1 Introduction to the CAM/CMOS-2K.LS Ultra-High Performance Li ne Scan Ca mera ........................................................ 6 1.1 Camera Hi ghlights ................................................................
SECTION 5 Handling Inst ructi ons ...........................................................................................32 5.1 Electrosta tic Disc harge .....................................................................................32 5.2 Preventing ESD Dam age .
SECTION 1 Introduction to the CAM/CMOS-2K.LS Ultra-High Performance Line Scan Camera 1.1 Camera Highlights Description The OWL CMOS Line Scan Camera is an ultra-sensitive camera for use in line scan applications that demand high performance under low light conditions.
Full Spectrum of Applications • Precision manufacturing inspection • Web inspection • Sorting and routing • Biomedical readout systems • Diagnostic systems 1.2 Camera Specification: RDI and MRDI Performance Specification Table 1.2.1 Functions RDI MRDI Data rates Up to 80 MHz Up to 80 MHz Line rates 38 KHz 2.
Table 1.2.2 Settings and Controls Function Factory Calibrated User Settable Camera Link Reset to Default Conditions X X Fixed Pattern Noise Correction X X X PRNU Correction X X Integration Time X X External Synch / Free Run X X Pixel Level Gain X X Line Synchronization X X Test Patterns X X X 1.
Figure 1.3.1 RDI and MRDI Responsivity Curve 1.4 Image Sensor Pixel level processing image sensors are based on the principle that photons induced by charge at the pixel site should be converted to, as nearly as possible, a noise-fre e signal at the pixel site.
Figure 1.4.1 Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manu al • Rev C• 10 of 42.
SECTION 2 Camera Hardware Interface 2.1 Installation Overview Before you integrate your camera into your system you should first determine some basic operating parameters such as what resolution you need.
Table 2.2.1 Camera Pin # Frame Grabber Pin # Channel Link Signal 1 1 Inner shield 14 14 Inner shield 2 25 X0 15 12 X0+ 3 24.0 X1- 16 11 X1+ 4 23 X2- 17 10 X2+ 5 22 Xclk 18 9 Xclk+ 6 21 X3 19 8 X3+ 7 2.
Table 2.3.1 Hirose Receptacle Pin # Description 1 +5.0 - +6.0 V DC 2 +5.0 – +6.0V DC 3 Ground 4 Ground If you are using an adjustable lab power supply it is extremely important that you apply the apppropriate voltage to your camera. Incorrect voltage might damage the camera.
SECTION 3 Camera Control 3.1 Quick Start with the Camera Link TM Interface Follow your Frame Grabber manufacturer’s instructions when inserting the frame grabber card into your PC. Be sure that you install the correct configuration software that matches the camera that you are using.
VER This command will show you the current software version in your camera. The camera returns………………...FPGA REV.2.5 The current value may be different Micro rev. 0.90 Prod rev. A 1.01 SLR This command allows you to set line rate, enter value and enter.
SSM This command allows you to set the Sync mode. When selecting the option you need, enter the appropriate single digit number, and then hit enter. Value Function The camera returns ………….
LED This command allows you to change the color. When selecting the option you need to, enter the appropriate single digit number and hit e nter. Your screen will be blank during this command You can .
SBS Value Function Set bit shift 0 12 bit 1 10 bit 2 8 bit CAO Adjust analog video offset mismatch. Calibrate analog offset 200 DN. SAG Set analog gain 0 – 10 db CAG Adjust analog video gain mismatch. Calibrate analog gain. GSN Get camera serial number, returns 128 character string: serial number, model, etc.
Command Definition Summary CBR Change Baud rate This function allows user to select baud rate LED Light Emitting Diode Change LED state GDA Get DAC All Returns current DAC setting as a voltag e SDN Se.
ExSync Line Synchronization with Electronic Shutter Control is the fourth mode (Figure 3.4.5). It gives the user asynchronous hardware control both start and end of integration. The control lines ExSync and ElectronicShutter are CameraLink TM lines CC1 and CC2 respectively as described in Reference A, and must be asserted by the frame grabber.
LineVal id Camer a Out put Notes specif ic t o thi s mode 1 The camera is not t riggered -- instead, the camera itsel f synchroni zes the system. This i s the defaul t mode set by the f actory 2 The camera int ernall y init iat es readout of l ine "n" on it s ow n.
ExSyn c Cam era I nput LineVal id Cam era Output N ote s sp ec ific to th is m od e 1 Unlik e Freerunni ng mode, the user tri ggers (s eparatel y ) bot h the CAM / CM OS - 2K .LS r eadou t c y cle, and the CAM / CM OS - 2K.LS r eset- &-int egr ati on cycl e.
Ex C C Syn c amera Input LineVal id amera Output N otes sp e cific to this mo de 1 The reset-and-i ntegrati on cycle is i niti ated by Ex Sync b eing t ake n low by the user; t his has the ef fect of .
Elec tShutter Camer a Input ExSync Camer a Input LineVal id Camer a Output Notes specif ic to this mode 1 The user initi ates the reset-&-i ntegrat ion cycl e by taking the ElectShutt er Camera In.
Table 3.5.6 Synchronization Timing Values CAM/CMOS-2K.LS t XFR 300nsec t initiation 40nsec t Readout 25.6nsec t Reset2 4µsec t Reset3 5µsec t MinSynch 1.
SECTION 4 Mechanical and Optical Guidance Figure 4.1 4.1 Camera Dimensions and Mounting Facilities The CAM/CMOS – 2K.LS camera housing is manufactured with high precision. Planar, parallel, and angular sides guarantee precise mounting with high repeatability.
4.2 Lensing The CAM/CMOS – 2K.LS as shipped from the factory accepts universal manual "F" mount lenses that are available from a number of suppliers.
Figure 4.3.2 Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manu al • Rev C• 28 of 42.
4.4 Mechanical Drawing of Available Camera Face Mounting “L” Bracket Contact your Fairchild Imaging representative for more details Figure 4.4.1 Fairchild Imaging • CAM/CMOS-2K.
4.5 Lenses Fairchild Imaging does not supply lenses. 4.6 Positioning Accuracy of th e Sensor Chip in the Camera Positioning accuracy of the sensor chip in the horizonta l and vertical direction is + 0.2 mm. Rotational positioning accuracy is as shown.
4.9 Lens Modeling Several camera companies have included this and lik e information in their manuals. For reference material it is very useful. The focal point is the point at which the image of an infinitely distant object is brought to focus.
SECTION 5 Handling Instructions 5.1 Electrostatic Discharge The Fairchild Imaging LNL2048S is a metal oxide semiconductor (MOS) device, and as all such devices, has some limited inherent susceptibility to ele ctrostatic discharge (ESD). All reasonable and customary design steps have been taken to provide ESD protection circuitry.
SECTION 6 Troubleshooting 6.1 Check the Obvious Things Out First When trouble shooting, you want to start the process with the obvious components contained within your system: • Computer system: har.
Everything Seems To Be Working, But No Image Remove the cover from your PC and reset all the cards into the Mother board. Sometimes when you move your PC, cards inside the PC work themselves loose. Data Clocking/Output Signals Verify the presence of all data clocking and output signals.
SECTION 7 Product Support If after troubleshooting your camera, and you still have problems, collect the following data about your application and situation and call Fairch ild Imaging Customer Support.
REFERENCE A Camera Link TM Introduction Camera Link is a Protocol that is Implemented in Channel Link Hardware Camera Link is a communication interface for machine vision. The interface extends the underlying technology of Channel Link to provide a specification more useful in this application.
Video Data Signals The Channel Link technology is integral to the transmission of video data. Image data and image enable signals are transmitted on the Chan nel Link bus. Four enable signals are: FVAL-Frame Valid (FVAL) is defined HIGH for valid lines (not used by the CAM/CMOS – 2K.
Power Per the standard, power is not provided on the CameraLink TM connector of the camera. Power is supplied through the Hirose connector. Port Assignments See Tables 3.4.1 for the opt ions of using the CAM/CMOS - 2K.LS with CameraLink TM . In CameraLink TM , a p ort is defined as an 8-bit word as show n in Figure A.
Camera Link Connections -- the MDR 26-Pin Connector The 3M MDR-26 connector was selected for its robust design and reputation for success with high- frequency Channel Link transfer rates ov er several years of experience. The MDR-26 connector is addressed in Section 2.
Figure A.2 Data Routing for Base, Medium and Full Configurations Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manu al • Rev C• 40 of 42.
Figure A.3 Data Routing for Base, Medi um and Full configurations Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manu al • Rev C• 41 of 42.
Figure A.4 Camera Link Cable Figure A.5 3M Part Number Ordering Infor mation (see further www.3M.com) Fairchild Imaging • CAM/CMOS-2K.LS Line Scan Camera User’s Manu al • Rev C• 42 of 42.
Ein wichtiger Punkt beim Kauf des Geräts Fairchild CAM/CMOS-2K.LS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fairchild CAM/CMOS-2K.LS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fairchild CAM/CMOS-2K.LS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fairchild CAM/CMOS-2K.LS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fairchild CAM/CMOS-2K.LS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fairchild CAM/CMOS-2K.LS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fairchild CAM/CMOS-2K.LS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fairchild CAM/CMOS-2K.LS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fairchild CAM/CMOS-2K.LS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
