Benutzeranleitung / Produktwartung GX3300C des Produzenten Allied International
Zur Seite of 35
GX 3300 / GX 3300 C Allied Vision Technologies Canada Inc. 101-3750 North Fraser Way Burnaby, BC V5J 5E9 / Canada Technic al Man ual 700060 A April 7, 2010.
GX3300 T echnical Manu al Page 2 T able of Content s Table of Contents ............................................................................................................. 2 Introduction .......................................................
GX3300 T echnical Manu al Page 3 Legal notice For customers in the U.S.A. (FCC Complia nce Information) This equipment has bee n tested and found to comply with the limits for a Class A digital de vice, pu rsuant to Part 1 5 of the FCC Rules.
GX3300 T echnical Manu al Page 4 Contacting Allied Vision Technologies • Technical in formatio n: http://www. alliedvisiontec .com • Support: support@al liedvisiontec .com Allied Vision T echnolog ies Gmb H (Headqua rters) Tasc henweg 2a 07646 Stadtr oda, Germ an y Tel.
GX3300 T echnical Manu al Page 5 Intr oduction The GX3300 series of cameras are sens itiv e, 17 f rames per second, 8 m egapixel, Gigabit E thernet cameras b ased on the Kodak KAI-08050 CCD sensor. Th ese camera s support the us e of 1 o r 2 gigabit E thernet ports in a LA G configuration for higher bandwidth requirem ents.
GX3300 T echnical Manu al Page 6 Canada Inc. will n ot warranty pa rts which have b een dam aged through the obvious misuse of this product..
GX3300 T echnical Manu al Page 7 Specification s Sensor Type Kodak KA I-08050 Sensor Shutte r Type Progressive Interline Image Re solution 3296 x 247 2 pixels Pixel Size 5.
GX3300 T echnical Manu al Page 8 Supported Features Imaging Mod es free-runnin g, external trigger, fixed rate, softwa re trigger Fixed Rate Co ntrol 0.
GX3300 T echnical Manu al Page 9 Mechanica l GX F-MOUNT.
GX3300 T echnical Manu al Page 10 Connections GX CONNECTIO N DIA GR AM.
GX3300 T echnical Manu al Page 11 GIGABIT ETHERNE T PORTS These ports confo rm to the IEEE 802. 3 1 000BASE-T standard for Gigabit Ethe rnet over copper. It is recommend ed that CAT5E or CAT6 com patible cabling and connectors be used for be st p erformance.
GX3300 T echnical Manu al Page 12 EXTERNAL P OWER This connect ion provides the main power f or the camera. T he camera operate s f rom a DC voltage be tween 5V to 24V . T he current capacity of t he power supply can be estimated by d ividing th e came ra ’ s po wer requireme nt b y the external power voltage.
GX3300 T echnical Manu al Page 13 SYNC OUTPUT S (1 to 4) These signals are o ptically iso lated a nd require the user t o p rovide a h igh voltage level ( USER VCC ) and sig nal co mmon ( USE R GROUND ). US ER VC C can be f rom 5 V to 24V. ICC is a func tion of USER VCC and load res istor R.
GX3300 T echnical Manu al Page 14 These signals only function as outputs a nd can be configured as f ollows: Exposing Correspon ds to when camera is integrating light.
GX3300 T echnical Manu al Page 15 LENS CONTRO L PORT PIN FUNCTION 1 IRIS + 2 IRIS - 3 FOCUS + 4 FOCUS - 5 ZOOM + 6 ZOOM - 7 AUTO IRIS SIGNAL 8 GROUND LENS CONTROL P ORT AS SEEN FROM BACK OF CAMER A This connector provides the s ignals necessary to control the iris, focus, and zoom of most commercially av ailable TV Zoom lenses.
GX3300 T echnical Manu al Page 16 Cleaning the Sensor DO NOT CONT A CT C LEAN SENSOR UNLES S ABSOLUTELY NECES SARY. Identifying Debris Debris on the image sensor or o ptical components will appear as a darke ned area or smudge on the image that does not mo ve a s the camera is mo ved.
GX3300 T echnical Manu al Page 17 Adjusting the F-mou nt THE F-MOUNT IS ADJUSTED AT THE F ACTORY AND SHOULD NOT REQUIRE ADJUSTING. If for some rea son, the F-mount re quires adjustment, use the following method. Attach F-mount compatible lens Use an F-mo unt compa tible le ns that allows an infinity f ocus.
GX3300 T echnical Manu al Page 18 assembly u ntil th e image is in f ocus. Carefully ti ghten the 3 se t screws. Recheck the focus..
GX3300 T echnical Manu al Page 19 Network Card Configuration Operating G igE Vision GX cameras using multiple network adaptors The GX series cameras offer two Gigabit Etherne t ports for image data transfer and control. Users can c onnect one or both ports on the GX to Ethernet adap ter ports on a host computer.
GX3300 T echnical Manu al Page 20 5. Click on “ OK ” to validate your change (the “ Properties ” windo w will close). The Property list will be different between different types/brands of gigabit E thernet interface cards. If "Jum bo Frames" does not appear in this list, then your card pro bably does not support it.
GX3300 T echnical Manu al Page 21 adapter from others in your system. Click “ Next ” to co ntinue. 12. Se lect the two Ethernet po rts to which the GX camera will be con nected. These po rts wi ll form our LAG or TEAM. Click “ Next ” to continue.
GX3300 T echnical Manu al Page 22 15. On ce completed the prop erties of the TEAM (LAG) that has just been created will appear. A new Network Connections Ico n corresponding to the LAG group is created. You have no w completed the Link A ggregate Group configuration.
GX3300 T echnical Manu al Page 23 GigE Sample Vie wer and Filter D r iver o Download GigE S ample Viewer from www .allied visiontec.com . This will install th e Sample V iewer application program, d rivers, and optionally the AVT/Pro silica Filter Driver.
GX3300 T echnical Manu al Page 24 T rouble Shooting Is the camera getting po wer? The Green LED is the camera pow er indicator. If unlit, check the power adapto r. If possible, swap with o ne that is known to work. If usin g a custom power ada ptor, be sure the adaptor su pports the voltage and power require ments of the camera .
GX3300 T echnical Manu al Page 25 The following example is not on the same Subnet : NIC IP 169.250. 23 .2 Sub net Mask: 255.255.255. 0, CamIP 16 9.254. 13.0 Subne t Mask: 255.255.0.0 . This can happe n if you use a non A utoIP range o n your NI C and it d oesn ’ t have access to a DHCP server.
GX3300 T echnical Manu al Page 26 All stats 0 while streaming. Fir ewall likely blocking traffic • All stats 0. Like ly a firewall is blocking incomin g traffic. Disable your f irewall. Check your camera trigger settin gs. Many camera trigger mo des require a software o r hardware trigger event to capture frames.
GX3300 T echnical Manu al Page 27 Addendum.
GX3300 T echnical Manu al Page 28 GX IO Schema tic PIN 3. SY N C OU T 4 VDD +3.3 TL P281-4GB 7 8 10 9 PIN 9. R S-232 T X D CAMERA LOGIC SY N C OUT 2 CAMERA LOGIC SY N C OUT 3 1 2 3 4 5 6 7 8 9 10 11 12 HI R OSE H R 10A-10R-12PB TL P281-4GB 5 6 12 11 100K CAMERA LOGIC SY N C IN 2 4.
GX3300 T echnical Manu al Page 29 User T r igger Circuit Example This diagram indicates one exam ple of a 5V TTL based user t rigger circuit. 0.1 u 10V CAMERA POWER U SER LOGI C SY N C OU T 4 SY N C I.
GX3300 T echnical Manu al Page 30 TV Zoom Lens C onnection FO C U S+ Z OO M I RI S- FO C U S- C OM MO N FO C U S- FO C U S Z O O M- Z O O M+ C OM MO N Z OO M+ FO C U S Z O O M FO C U S+ C OM MO N H IR.
GX3300 T echnical Manu al Page 31 Video Ir is Connectio n V ID E O A UTO- IR IS L E NS H I R OSE 3240-8P-C(50) 1 2 3 4 5 6 7 8 LENS POW ER POW ER GR OU N D POW ER GR OU N D VI D EO SI GN AL 12V_POWER .
GX3300 T echnical Manu al Page 32 T rigger Timing Diagra m.
GX3300 T echnical Manu al Page 33 Notes on T riggering Definitio ns o User Trigger is the trigger signal applied by the user. o Logic Trigger is the trigger signal seen b y the camera internal logic. o Tpd is the p ropagation delay between the User Trigger and the Logic T rigger.
GX3300 T echnical Manu al Page 34 Triggering durin g the Readout Stat e o For applications requiring the faste st triggering cycle t ime where by the camera image sens or is exposing a nd readin g out simultaneously, t hen the Use r T rigger signal shou ld be applied as soon a s a valid Trigger Ready is detect ed.
GX3300 T echnical Manu al Page 35 Camera Controls For the latest, up to date camera controls, see AVT Camera and Driver Attributes.pdf at http://ww w.alliedvisiontec.
Ein wichtiger Punkt beim Kauf des Geräts Allied International GX3300C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Allied International GX3300C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Allied International GX3300C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Allied International GX3300C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Allied International GX3300C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Allied International GX3300C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Allied International GX3300C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Allied International GX3300C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Allied International GX3300C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
