Benutzeranleitung / Produktwartung 4670 Series des Produzenten Eureka
Zur Seite of 24
Upright V acuum Cleaner Owner ’ s Guide 4670 Series Household T ype IMPORT ANT Do not return this product to the store. For assembly problems or questions contact: Eureka’s Customer Service Division toll free at 1-800-282-2886*, 7 a.m. to 8 p.m., Central Standard T ime, Monday through Saturday .
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ TOUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
5 5 HOW TO ASSEMBLE CAUTION: Assemble the cleaner before using. CAUTION: Moving parts, stay clear of brush roll when plugging in. NOTE: Features may vary by model yet all parts assemble the same. Step B Attach Handle CAUTION: Do not catch cord under handle.
6 8. Remove front cover by pulling out on the front cover latch and lifting the front cover upward and out. 9. Check to be sure the paper bag collar is secure with the hose adapter inside the paper bag collar . 10. Replace front bag cover . 1 1. Y ou will find your cord retainer on the handle above the upper cord hook.
7 Clean Under Use Handle Release 3 HOW TO USE The upright vacuum cleaner design allows use on multiple types of carpeting and on upholstery or bare floors with attachments. When using the attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.
8 How T o Use Accessories NOTE: Do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with the handle in storage position while using accessories. Crevice T ool Upholstery Side . . . . . Combination T ool gives two types of cleaning tools.
9 Maintenance of Dirt Alert Feature (On some models) The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light beam, the red light comes on indicating additional cleaning is needed in this area.
10 HOW T O MAINT AIN The instructions in this booklet serve as a guide to routine maintenance. T o avoid unnecessary service calls, check the bag, belt, and brush roll often. Brush Roll The brush roll turns as it sweeps and combs the carpet nap. Remove hair and threads from the brush roll so it continues brushing the carpet.
11 5 5. Place new belt around motor pulley . . . . . . 7 6 Left side view 6. Place belt around brush roll pulley . 7. Align left end cap with square in base. Push end cap into place; see left side view . 8 8. Pull right side of brush roll to stretch belt.
12 How T o Replace Bags–Style AA Filteraire NOTE: T urn off the switch and unplug the electrical cord before changing dust bag. Never operate the vacuum cleaner without the dust bag or the filter . NOTE: Style AA Filteraire bags must be used to maintain HEP A grade filtration and prolong the life of the HEP A filter .
How to Check and Clear Hose Blockages Low suction or poor pickup may be due to a blockage in the vacuum cleaner . 1. Remove hose and check suction at end of hose - if little or no suction, check disposable dust bag. Change if needed. If no improvement proceed to step 2.
14 Handle Release 1. Remove the attachment hose from the lower hose retainer and look into the hose retainer for any obstructions. Proceed to Step 2 to check for any other blockages. 4. Check for blockages in the brush roll area and remove any obstructions found there.
15 T o remove HEP A cartridge filters 1. Push down latch and pull filter cassette back. 2 . Then lift filter up and remove. T o replace HEP A cartridge filters 1. Place bottom tabs of filter cassette into slots. 2. Rotate filter toward cleaner . 3. Push upward on the latch to secure into place.
16 Use 15 watt replacement light bulb, part number 48815. How T o Change Light Bulb (Only for models with a headlight) NOTE: T urn off the power switch and disconnect the electrical cord before changing light bulb. 1. Lower handle. Remove two screws from lens cover .
Some models will come complete with an extra bonus hose which is ideal for cleaning stairs. HOW TO ASSEMBLE AND USE ST AIR CLEANING HOSE (Only on Certain Models) Step 3 - Y ou are ready to clean your stairs. Step 2 - Connect the hose cuff to the end of the bonus hose.
Motor will not start. Electric Plug Push plug securely into outlet. T ry another outlet. Check circuit breaker . Motor suddenly stops. Thermal Cut Off Refer to page 7. Does not clean the carpet or Disposable Dust Bag Change the bag. Hint: If picking up fine dust, the bag floor .
58623A 58236A 54926 61333 61120 60285B 60665 58728B 13104-4 61037 26708-119N 60112 54785A 54002 60169 54646A 60169-1 60166 61224-1 60252-2 60251-2 61308-1 48815 5.99 3.99 9.99 1.99 2.99 19.99 2.99 4.39 2.49 4.49 2.69 22.69 10.39 12.99 18.79 8.69 17.39 29.
.
21 THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year . The warranty is granted only to the original purchaser and members of his or her immediate household.
.
.
©2000 White Consolidated Industries, Inc. Printed in U.S.A. Thank you for selecting a Eureka cleaner . 1 wand 1 crevice tool 1 combination tool (on some models) 1 hose assembly 1 vacuum cleaner handle Accessory Items in This Carton 1 hardware package (2 screws) Questions? Do Not Return T o Store Call 1-800-282-2886 7 a.
Ein wichtiger Punkt beim Kauf des Geräts Eureka 4670 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eureka 4670 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eureka 4670 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eureka 4670 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eureka 4670 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eureka 4670 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eureka 4670 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eureka 4670 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eureka 4670 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
