Benutzeranleitung / Produktwartung G2 des Produzenten Eton
Zur Seite of 29
© Copyright 2012 Etón Corporation. All Rights Reserved. Grundig Radio Line By Etón Corporation G 2 RE PORTE R AM/FM/Shortwave Radio/Recorder OWNER’S MANUAL.
.
3 G2 REPORTER OWNER’S MANUAL NEED HELP? Contact Us. Etón Corporation, 1015 Corporation W ay , Palo Alto, CA 94303, USA. 1-800-872-2228 (U.S.); 1-800-637-1648 (Canada); 650-903-3866 (worldwide); M-F , 8:00-4:30, Pacific Standard Time; www .etoncorp.
G2 REPORTER OWNER’S MANUAL 4 FUNCTION KEYS G2 RE P OR TE R AM • FM • SW • Radio/Recorder RADIO/MP3 ESC MENU ENTER 22 21 20 19 18 17 16 15 14 13 12 23 10 11 1 2 3 4 5 6 7 8 9 1 Power On/Off 2 F.
5 G2 REPORTER OWNER’S MANUAL FUNCTION KEYS AM-FM- SW-Radio /Record er FM: 64.0/ 87 .0-108.0MHz AM: 5 22-1 710KHz SW: 2 .30-23. 00MHz 24 25 27 28 29 30 31 32 26 24 Antenna 25 Back Stand 26 Battery Co.
G2 REPORTER OWNER’S MANUAL 6 BA TTERY POWER SUPPL Y Before initial use, open the battery compartment (behind the back stand), make sure the lithium battery is installed. CHARGING THE LITHIUM BA TTERY T o charge the battery , connect the unit to the mini-USB port and opposite end to a power source (5V DC/500mA).
7 G2 REPORTER OWNER’S MANUAL TURN ON/OFF THE UNIT 1. T urn ON/OFF manually: Press the < > button. 2. T urn Off Using Automatic Sleep Timer: Select “Sleep T imer” in Sys Set mode, press the T uning Knob to enter and then rotate the T uning Knob to adjust the auto turn off timer from 0-90 minutes.
G2 REPORTER OWNER’S MANUAL 8 FM RADIO In Main Menu, select FM Radio and press the T uning Knob to listen to FM. FM Radio Press the < > button to enter either Radio or Music Mode. Choose Bands In Radio Mode, press the < > , < > or < > button to select your desired band.
9 G2 REPORTER OWNER’S MANUAL FM Stereo/Mono Selection T o activate stereo listening, press the < > button and the display will show < > symbol; press again to deactivate, and the mono symbol < > will show .
G2 REPORTER OWNER’S MANUAL 10 TUNE IN ST A TIONS T urn on the radio and select FM Radio from < Main Menu > by rotating the T uning Knob. Press the < T uning Knob > to enter , then choose your desired band by pr essing on either the FM, AM or SW button.
11 G2 REPORTER OWNER’S MANUAL Storing Stations Manually Select your desired station, pr ess the tuning knob or the < > button and rotate the T uning Knob to select < Save >, then rotate the T uning Knob or the < >, < > button to select memory location from 1~50 in FM/SW mode or 1~25 in AM mode.
G2 REPORTER OWNER’S MANUAL 12 RECORD RADIO While listen to the FM/AM/SW stations, you can directly r ecord the programs by following the steps below: 1.
13 G2 REPORTER OWNER’S MANUAL LISTEN TO RECORDING FILES 1. Select < V oice > in the < Main Menu > and pr ess the T uning Knob to enter . 2. Press the < > or < > button to select file. 3. Press the < > to play/pause the recorded file; press the < > button to stop.
G2 REPORTER OWNER’S MANUAL 14 LISTEN TO MP3 FILES 1. T urn on the unit and select < Music > from the < Main Menu >, then press the T uning Knob to enter . 2. Rotate the T uning Knob or press the < > or < > button to select a music file.
15 G2 REPORTER OWNER’S MANUAL 5. While not playing any music, press the T uning Knob to enter the following settings: · Local folder: Select music file · Delete file: Delete a single music file.
G2 REPORTER OWNER’S MANUAL 16 USE AS AN ACTIVE LOUDSPEAKER (LINE-IN) Connecting the unit to other medias (MP3, voice recor der , etc.) with the Line-in Cable, can increase the sound of the media connected. 1. Plug one end of the Line-in cable to the earphone jack of the audio equipment, and the other end into the Line-in Port of the unit.
17 G2 REPORTER OWNER’S MANUAL USE AS LOUDSPEAKER (MIC) 1. Insert the external MIC into the exter nal MIC Jack on the left side of the unit. 2. T urn on the unit, select <Loudspeaker> in < Main Menu > by pressing the T uning Knob. 3. Press the < > button and select < MIC Signal >.
G2 REPORTER OWNER’S MANUAL 18 LINE-IN RECORDING 1. Press POWER button to turn on radio. 2. Plug a line in source into the LINE-IN socket < >. 3. Press the MENU button < > and turn the tuning knob to select LOUD SPEAKER. 4. Press the tuning knob.
19 G2 REPORTER OWNER’S MANUAL Time Set 1. Select < Time Set > in Sys Set Mode by rotating the T uning Knob. 2. Press the T uning Knob and notice the hour -indicator flashes, then rotate the T.
G2 REPORTER OWNER’S MANUAL 20 Alarm Set 1. Select [Alarm Set] in Sys Set mode and press the T uning Knob, [New] appears on the display . 2. Press the T uning Knob again to enter the alarm setting, [Normal Alarm/Power On/Power Off/Exit] appears. 3. Rotate the T uning Knob to select Normal Alarm and press the T uning Knob.
21 G2 REPORTER OWNER’S MANUAL Alarm On/Off Alarm Off: Select [Alarm Set] in Sys Set mode and pr ess the T uning Knob to enter . [New] appears on the display . Press the T uning Knob again , [Normal Alarm, Power off, Power on, Exit] appears. Rotate the T uning Knob to select [Power off], then follow the same steps in [Alarm Set].
G2 REPORTER OWNER’S MANUAL 22 SLEEP TIMER Select [Power Off] in Sys Set mode, pr ess the T uning Knob to enter , then rotate the T uning Knob or press the < >, < > button to adjust the auto turn off timer from 0-90, select “0” to turn off the sleep timer .
23 G2 REPORTER OWNER’S MANUAL CONTRAST SETTING Select [Contrast] in Sys Set mode and press the T uning Knob. The brightness level 0-16 appears on the display , rotate the T uning Knob to adjust, and then press the T uning Knob to confirm and exit.
G2 REPORTER OWNER’S MANUAL 24 BACK ST AND Open the stand on the rear of the unit to allow for an upright position. WORKING WITH EBOOK 1. Select <Ebook> in < Main Menu >, press the T uning Knob to enter .
25 G2 REPORTER OWNER’S MANUAL FM RDS 1. Select an FM station, press the T uning Knob and rotate to select <Open RDS>, the symbol < > will show on the display . 2. Press the < > button to shift the transmitted details (display on the button of the screen).
G2 REPORTER OWNER’S MANUAL 26 SPECIFICA TIONS Frequency Range FM 87.0 - 108.0MHz or 64 AM 522 - 1710 KHz SW 2.30 - 23.00 MHz 2. Preset Memories: FM 99 AM 50 SW 99 3. 4. Noise Limit Sensitivity FM ≤ 5 V AM ≤ 2.5mv/m SW ≤ 50 V Signal Selection ≥ 40dB 1.
27 G2 REPORTER OWNER’S MANUAL W ARRANTY REGISTRA TION T o ensure full warranty coverage or product updates, r egistration of your product should be completed as soon as possible after purchase or r eceipt. Y ou may use one of the following options to register your pr oduct: 1.
G2 REPORTER OWNER’S MANUAL 28 SERVICE FOR YOUR PRODUCT T o obtain service for your product, we recommend first contacting an Etón service repr esentative at 800-872-2228 US, 800-637-1648 Canada or (650) 903-3866 for problem determination and troubleshooting.
Etón Corporation Corporate Headquarters 1015 Corporation W ay Palo Alto, California 94303 USA tel +1 650-903-3866 tel +1 800-872-2228 fax +1 650-903-3867 Etón Canada 1 Y onge Street, Suite 1801 T oronto, Ontario M5E 1W7 Canada tel +1 416-214-6885 Designed by Etón Corporation and assembled in China.
Ein wichtiger Punkt beim Kauf des Geräts Eton G2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eton G2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eton G2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eton G2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eton G2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eton G2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eton G2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eton G2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eton G2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
