Benutzeranleitung / Produktwartung X-01 D2 des Produzenten Esoteric
Zur Seite of 27
D00942621B Super Audio CD / CD Player Owner ’ s Manual .................... 2 Manuel du Propriétaire ........... 27 Bedienungsanleitung ............
2 CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
3 ENGLISH For U.S.A. ① Contents Thank you for choosing Esoteric. Read this manual carefully to get the best performance from this unit. This product has been designed and manufactured according to F.
The latest VRDS mechanism for Super Audio CD (Specially developed ball bearings for the optimum VRDS mechanism.) The VRDS mechanism securely clamps the disc to the turntable whose diameter is exactly the same as that of the disc.
5 ENGLISH What’ s in the box Please confirm that the following accessories are in the box when you open it. Remote control unit x 1 Batteries (AA, R6, SUM-3) x 2 Felt sheet x 3 Power cord x 1 Owner’s manual x 1 Warranty card x 1 Conventions about This Manual < Instructions in this manual describe the controls on the remote control.
6 Discs Audio CD: • 12cm or 8cm discs • Linear PCM digital audio Audio CDs are divided into tracks. Super Audio CD: • Single layer, dual layer or Hybrid layer • 12cm or 8cm discs • Digital audio (DSD) Super Audio CDs are divided into tracks.
7 ENGLISH Remote Control Unit If you have made a lot of changes to the setup, and want to restart from a known set of options, restore the unit to the factory settings as follows: 1. Turn the unit off and wait 30 seconds or longer. 2. Press the POWER button while holding down the STOP button.
WORD SYNC OUT i.LINK (AUDIO) F C E 5.1CH AUDIO IN L R L R FRONT SURROUND SUBWOOFER CENTER DIGIT AL IN (COAXIAL) DIGIT AL IN (OPTICAL) AUDIO IN R L B B A A D 8 Connection RCA cable RCA coaxial cable optical digital cable BNC coaxial cable XLR cable Balanced XLR pin assignment Stereo amplifier Master clock generator (G-0s etc.
9 ENGLISH Analog audio output terminals 2 channel (FRONT) Use either the XLR or RCA (pin) FRONT terminals for analog stereo output. If your amplifier has balanced XLR analog audio inputs, connect the XLR jacks on the unit to the amplifier’s XLR jacks, otherwise use the RCA (pin) connections.
10 Front panel featur es Disc type indicator Shows the type of disc currently loaded. TRACK indicator Indicates that the track number is being shown. TOTAL indicator Indicates that the total time is being shown. REMAIN indicator Indicates that the remaining time is being shown.
11 ENGLISH Understanding the remote contr ol unit Number buttons Use these buttons for selecting tracks by number, etc. 2CH/MULTI Use this button to switch between two-channel (stereo) and multi-channel surround audio output. PLAY AREA Use this button to select the playback area of Super Audio CDs.
12 Playback Opening and closing the tray 1 5 2 4 3 Turn the unit on. 1 Each press of the POWER button turns the unit on and off. The ring surrounding the POWER button and the display light up when the unit is turned on. Press the OPEN/CLOSE button. 2 The shutter opens and the disc tray slides out.
13 ENGLISH There are two types of Super Audio CDs, regular ones that contain 2-channel stereo and multi-channel stereo and hybrid discs (two-layer discs) that contain Super Audio CD and regular CD data. When a hybrid Super Audio CD is loaded and when the playback is stopped, press the PLAY AREA button to select a playback area.
14 Programmed playback Programmed playback allows up to 30 tracks to be played back in the order you decide. Press the PROGRAM button (either when playing back or stopped). If a track is currently playing back, this track is added as the first item in the programmed playback list.
15 ENGLISH Repeat mode < Halting playback stops the repeat mode. < The following buttons cancel repeat mode: STOP, OPEN/CLOSE, POWER. T rack repeat When this is selected, the currently-selected track repeats. If another track is selected during repeat playback, the newly- selected track repeats.
16 Changing the display mode During playback, it is possible to change the display as shown here. < The DISPLAY button doesn’t work during programmed playback.
17 ENGLISH Setting the Wo rd sync, DAC, priority playback ar ea, and i.LINK output (1) A vailable menu item and options WORD (Wor d sync) Use this feature to lock your entire system to a single sync signal (clock) by connecting this unit to the Esoteric G-0s or similar device that outputs a sync signal.
18 i.LINK Used to select an i.LINK output setting. When using the i.LINK terminal, select “60958” or “PCM”, and set the Digital Out to “ON”. 60958 DSD signal is output during playback of a Super Audio CD. The digital signal in IEC60958 format is output during playback of a CD.
19 ENGLISH Settings (introduction) Turn on the main unit. 1 Press the SETUP button to enter the setup menu. 2 “AudioSetup” appears on the front panel display. < Although it is possible to enter the setup menu while playback is continuing, not all menu functions will be available.
20 AudioSetup GeneralSet Analog Out SP Setup DigitalOut CD Direct SP Size Distance L/R *.*m C *.*m SR/SL *.*m SP Level L/R Size C Size SR/SL Size SW ON/OFF LR ***.
21 ENGLISH Settings (Audio Setup) Analog output (Analog Out) When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry. 2ch Outputs 2-channel audio from the the i.
22 Settings (Speaker Setup for the i.LINK and the 5.1ch analog audio output terminal) Use these speaker setup menus when the i.LINK (AUDIO) terminal or the 5.1ch analog audio output terminals are connected to a surround sound amplifier, and when you don’t use the speaker menus of the amplifier.
23 ENGLISH Speaker distance (Distance) This setup is effective in the following case only: Set the DAC mode to “M.bit” or “1bit”, play Super Audio CDs, and output sound from the 5.1ch analog output terminals. This setting has no effect on the i.
24 i.LINK (IEEE 1394) The i.LINK is also known as IEEE 1394, an international specification. This unit is i.LINK (AUDIO) ready. By connecting an i.LINK (AUDIO)-capable device to the i.
25 ENGLISH T r oubleshooting In case you experience any problem with this unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer. No power e Check the connection to the AC power supply.
26 Specifications General System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Super Audio CD an d CD Power supply Europe model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0107 . MA -1102B This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC ESOTERIC COMPANY 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5132 e-mail: eso-os@tec.
Ein wichtiger Punkt beim Kauf des Geräts Esoteric X-01 D2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Esoteric X-01 D2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Esoteric X-01 D2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Esoteric X-01 D2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Esoteric X-01 D2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Esoteric X-01 D2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Esoteric X-01 D2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Esoteric X-01 D2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Esoteric X-01 D2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
