Benutzeranleitung / Produktwartung Pro XL des Produzenten Epson
Zur Seite of 48
Version 3.1 Windows 3.11 Windows 95 Windows NT 3.51 (Intel) for EPSON Stylus Color EPSON Stylus Pro EPSON Stylus Pro XL INSTALLATION & OPERATION MANUAL.
PowerRIp” The Software Program That Turns Your Printer Into A True Adobe PostScript” Level 2 lmager Gila Adobe PostSaipt.
Q 1995 Birmy Graphics Corporation. All Rights Reserved This manual may not, in whole, or in part, be copied, photocopied, reproduced, translated, transmitted or converted to any electronic or machine - readable form without prior written consent of Birmy Graphics Corporation.
Table of Contents Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Installation System Requirements Operational Overview PANTONE Birmy Technical Support Installing the Software Windows 3.
Installation SYSTEM REQUIREMENTS HARDWARE Intel 486 or higher processor 8 MB Minimum of RAM for Windows and Windows 95, 24 MB minimum of RAM for Windows NT (See section 4 for more on RAM.) VGA or SVGA color monitor Mouse 3.5” floppy drive Hard drive with at least 40 MB free for letter size and 80 MB free for ledger size paper.
Operational Overview The following is an explanation of how a page is pro- cessed by PowerRIP. The Windows Printer Drivers supply the printer with codes that are needed to image a page. PostScript is a coding method that is the standard for high quality graphic output.
PANTONE PANTONE professional color palette files are included in your PowerRlP package. These files can be read directly into commonly used applications so the user can have printer calibrated versions of all PANTONE Colors for the EPSON Stylus Pro and Pro XL models.
When calling for technical assistance, be ready to identify your system and its configuration, the serial number of your copy of PowerRIP, and a description of the problems you are encountering. Please refer to the Troubleshooting Section for solutions before calling Technical Support.
Installing the Software Before installing PowerRIP, make backup copies of all the installation disks. There is no copy protection on the disks. You will be required to register PowerRlP and obtain the unlock code for your copy PoweRlP after installation.
4. In the command line type A:SETUP and click OK. (If you are loading from drive B type B:SETUP.) NOTE: If you are loading from Windows 95 click on Start, select Run, then type A:SETUP (or B:SETUP); or use the Add software option in Windows 95. 5. The PowerRlP program will now start to load and you see a Welcome screen.
6. The program will then ask you to choose the drive and directory you want PowerRlP to be installed on. The default is C:PowerRIP. You may leave the default directory or change it if desired and then click NEXT. Note: If you choose not to instal l PowerRlP at this time, click CANCEL to stop the installation.
8. When Disk 4 has loaded, the program will automatically create the group PowerRlP and PowerRIP icons for Windows. NOTE: If you are installing under Windows 3.11 the Uninstaller icon will not appear. 9. This completes the loading of the PowerRlP application.
PowerRlP Windows 3.11 Printer Driver Installation For Windows 95 or Windows NT see the appropriate section. 1. For Windows 3.11 put the PowerRlP Windows 3.11 Printers Drivers Disk into drive A o r B. Then from Program Manager go to File, Run, then type A:Setup or B if your drive is B.
4. With the PowerRIP Windows 3.11 Drivers disk in drive A or B click on Drives and select that drive. Then select your EPSON printer and click on install. 5. Your printer should successfully install. Now close and go to Control Panel and select Printers and select PowerRIP as your default printer.
7. Select FILE. PowerRIP Fen Stylus Cdor ‘I r,rw:rai.: :kr , Ewtrv Fast Printina Direct to Port 8. Then select OK. The program installation is now complete. PowerRIP must be registered before you can use it. Go to the section Registering your Software.
PowerRlP Windows 95 Printer Driver Installation 1. Click on Start, Settings, Printers section of Windows 95. 2. Click on Add Printer, then Next. 12 Birmy Graphics Corporation.
3. Click on Local Printer, then Next. Note: You may not see this screen if you are not on a network. 4. Click on Have Disk. Birmy Graphics Corporation.
5. Put the PowerRlP Windows 95 Printer Driver disk in drive A or B. If drive B, you must change to that drive designation. Click OK. Note: You may need your Windows 95 CD or master diskette #1 0 to install the Windows 95 PostScript drivers. 6. Select your printer and click Next.
8. 9. 10. You may change the printer name if you prefer. Make PowerRI P P your default printer and click OK. Do not print a test page. PowerRlP will not print at this stage. After selectin g Finished you may be asked to install your Windows 95 CD or master diskette # 10 for the Windows Drivers.
11. When you print from an application it will ask you for a file name. You can use almost any name but you must print to C:BIRMY directory or the drive letter where PowerRlP was installed.
PowerRlP Windows NT 3.5.1 Printer Drivers Installation 1. Click on Print Manager in the Main Folder. Select Printer and Create Printer. 2. Enter PowerRlP under printer name and go to driver and select Other. Printer tima: Qtir: D~miplian: hint ,o: PWWRIP I Glher.
4. Select your printer and click OK. Prinlar Drivw: 5. Now go to Print to and select Other. 6. Select Local Port. &ailablm Print Moniton: Digknl Nelvork Poll cnher. I I I 7. Type C:BIRMYIN.PS and click OK. If your drive is different than C, type that drive letter.
8 If you want to share the printer, selec t Share. Click OK. If share is selected then see the section on Printing from Workstations on a Network. 9. Now go back to Print Manager and create another printer. 10. Name it LPT. Select the PowerRlP driver that is now in the system under printers.
11. This LPT Print queue is where PowerRlP sends the job after it is ripped. Here is where you can cancel, pause, or purge the jobs before they are sent to the printer. Note: PowerRIP sends a small 30 byte file before each print job. This 30 byte file contains information for the printer to setup resolution and other options.
Operating PowerRIP To operate PowerRlP just click on the PowerRlP icon. PowerRlP will minimize itself at the bottom of the screen. This is the mode in which PowerRlP runs. If you double click on the Birmy PowerRlP icon at the bot- tom of the screen it will maximize itself.
Printing from Workstations on a Network After you have installed PowerRlP on the computer con- nected to the EPSON Stylus, all networked workstations running Windows for Workgroups, Windows 95 or Win- dows NT can print to PowerRlP providing the printer or directory is shared as shown on the previous pages.
Windows NT PowerRIP Setup On Windows NT Network print sharing with PowerRlP can have only one person print to a queue at a time, so if you want several people to print simultaneously you need to set up different print queues with unique file names and share names.
Registering Your Software You must register your copy of PowerRlP before you can use it. Follow these steps. 1. Click on the registration icon. 2. When you see the prompt, insert Disk 1 into Drive A or B and click OK.
3. Call the registration number (800) 613-3031. You will need your Serial Number and Printer Code found on the Registration Screen. Do not call this phone number for technical support. Call the numbers listed on page 3 for technical support. 4. When given the unlock code, type it in the Unlock Code box and click OK.
Customizing PowerRIP 1. If you haven’t rebooted your system, and you are running Windows 3.1, do so now. If you are running Window s 95 or Windows NT proceed without rebooting. 2. Double click on the PowerRlP icon in the PowerRlP window. The program will take a few seconds to load.
Printer Menu When you click on Printer, The following pull down menu will appear. Select Allows you to select different EPSON Stylus printers. NOTE: The display shows only the printer for which you purchased PowerRIP.
Printer Options Definitions: Media Type Select the paper or other media you are printing on. PowerRlP has color render- ing Dictionaries to produce the maximum image quality for the individual Epson special paper stocks.
Uni-directional The printer prints right to left on all lines. This mode reduces the possibility of banding (white lines). Resolution Resolution is a measure of the amount of detail that can be represented. Resolu- tion of printed images is measured in the number of dots per inch (dpi).
File Menu When you click on File, you see the following pull- down menu: Open log and Close log allows you to keep track of PostScript messages that occur during a print job. When you select Open, an open window will appear. In this window, you can select a file name for the log, as well as a drive and a directory.
Fife Name: ‘.PI 1 List Fifes of Jjpe: Postscript File[‘.PS ) c:powerripexamples hiyes: Gid c: bob 0 Bead Only About gives you information about PowerRIP. The product version and revision should be included on all information sent to Birmy Graphics Corporation with support questions.
Testing PowerRlP 1. Set up your EPSON Stylus printer using the instructions in your EPSON User’s Guide. 2. Turn on the computer and start Windows. 3.
8. Click OK. 9. To open a Print. PostScript file box, click on File click on Birmy Graphics Corporation 33.
10. In the PostScript File box, click o n PowerRIP. Then select examples. You should see the PostScript example cgolfer.ps in the left box. File Name: ‘.PS I List Filer d Jjpe: Porttcript Filel’.PS I Qirectorier: c:pow&pemmpter I D riyat: mc:bob 11.
Tips and Obtaining the Best Printing Quality The Birmy Graphics PowerRIP is a true Adobe Level 2 PostScript Raster Image Processor. A true Adobe Level 2 PostScript RIP has the ability to use color rendering dictionaries when the RIP is driving a color printer.
adjusting printer colors When using these files the “Treat all RGB as calibrated” option on PowerRIP should not be checked CMYK files are usually created in a device-dependant color space, where y.
To obtain high-quality color images, keep the follow- ing points in mind: l Use the manufacturer’s inks and recommended paper for your ink jet printer. l Papers designed for ink jet printers have special coatings to evenly distribute the ink, and are differ- ent than uncoated bond papers used in laser printers and copiers.
Cancelling a print job. Windows 3.11: To cancel a print job in Windows 3.1 you must reboot your system. Re-enter Windows and click on the Birmy Delete Pending Jobs icon or go to File Manager and go to the directory c:Birmy and delete the files in this directory.
Windows NT: To cancel in Windows NT, go to Print Manager. Select the LPT Queue that we created when we loaded the PowerRIP Windows NT Drivers. Then delete the files in this Queue. Then run the Birmy Delete Pending Jobs icon by click on it. Now restart PowerRIP.
Troubleshooting Problem Solution Printer prints out illegible type or characters. On Windows 3.11 and 95, PowerRIP needs to print to a file. In Print Manager check PowerRIP is set to file and not an LPT port. Also check that PowerRIP is minimized. PowerRIP only scans for files whe n mini- mized.
Problem Solution Problem Solution Problem Solution Problem Solution Problem Solution EPS files do not print. EPS file are designed to be placed into other documents. They cannot be processed directly by PowerRIP. Place EPS files on a page using an application and print from that application.
Problem Solution PowerRIP receives a error “Cannot open C:BIRMYPRPCTEMP.PS” upon startup. Run Delete Pending Jobs icon before starting PowerRIP. This will delete and files in the Birmy directory. Problem Solution Printout has misplaced images or type.
Glossary Several terms having special meaning within the context of this manual are listed below: Application Bitmap CPSI CPU EPS Imaging Device Interpreter Network PostScript Raster Image Applications are considered the programs that run on a computer.
Render The process by which PostScript language operators and operands are interpreted and a raster image is produced. RAM RIP TIFF Random Access Memory. Almost all PCs ship with 8 megabytes of RAM today, and many with 16 MB as minimum. You can add more RAM to most computers.
Ein wichtiger Punkt beim Kauf des Geräts Epson Pro XL (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Epson Pro XL noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Epson Pro XL - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Epson Pro XL reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Epson Pro XL erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Epson Pro XL besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Epson Pro XL verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Epson Pro XL. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Epson Pro XL gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
