Benutzeranleitung / Produktwartung PP4000 des Produzenten Epson
Zur Seite of 37
Rev.: Original PP4000 Series Thermal Printer User's Guide.
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
i Table Of Contents GETTING STARTED . . . . . . . . . . . . . . . . . . . . . 1 -- 1 CONGRATULATION . . . . . . . . . . . . . . . . . . . . . 1 -- 1 PRODUCT BRIEFING . . . . . . . . . . . . . . . . . . . . . 1 -- 2 MODEL NUMBERS . . . . . . . . . . . .
ii POWER ADAPTOR . . . . . . . . . . . . . . . . . . . . . . . 4 -- 2 TECHNICAL INFORMATION . . . . . . . . . . . . . . . 5 -- 1 INTERFACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 -- 1 SERIAL INTERFACE . . . . . . . . . . . . . . . .
1 - 1 I. GETTING S TARTED A. CONGRATULATION You have made a very wise decision by purchasing the high speed – low noise – high resolution – light weight – high reliability thermal printer PP4000 series of Posiflex products. This series of printers has been elegantly designed for a Point-Of-Sale application.
1 - 2 B. PRODUCT BRIEFING The PP4000 series printer uses thermal sensitive paper in form of a roll at a width of 80 mm. The PP4000 printer serves the stand-alone POS application as well as the application within a PST system equally perfect. The PP4000 series can support different interface input through different sub-codes to the model number.
1 - 3 C. MODEL NUMBERS EXAMPLE: PP 4 0 0 0 S 0 Power adaptor: 0: No adaptor 1: USA adaptor 2: European adaptor 3: UK adaptor 4: SA adaptor 5: AUS adaptor Interface: B: serial (RS422) C: parallel S: serial (RS232) Reserved Language/Expanded character set 0: English (standard) 1: GB-code Chinese 2: BIG-5 code Chinese 3: Korean 4: Thai 5.
1 - 4 D. UNP ACKING As illustrated in the above picture, followings are items you may find when you carefully unpack the carton that delivers PP4000 series printer.
1 - 5 E. MAIN PARTS ON THE EXTERIOR Power LED (green) Paper End LED (red) Paper feed button Power On / off switch Paper exit slot Bottom base Top cover.
1 - 6 F. INDICATORS • POWER LED: green • PAPER END INDICATOR: red. Different lighting pattern indicates each error status. Lighting pattern Meaning Constant light up Paper End Constant blinking Paper Near End 1 blink plus OFF 1.2 seconds ABMARK 2 blinks plus OFF 1.
1 - 7 G. OPERATING ENVIRONMENT • Place the printer on a sturdy, level surface. • Choose a place that is well ventilated and free of excessive dust, smoke or fume. • Do not put the printer in direct sunlight or near a heater. • Ideal room temperature is from 5 ºC to 40 ºC.
1 - 8 H. USEFUL TIPS • Do not pull the paper in the direction opposite to the paper feeding direction with the print head closed. • Do not touch the areas around the print head and motor during or right after printing.
1 - 9 • Store thermal paper away from high temperature and humidity. Avoid extended exposure to direct light. • Do not set any liquid or drinks such as coffee on the printer case.
2 - 1 II. QUICK S TART-UP A. LO ADING PAPER Open top cover by gently pressing the rear part of cover inward and lift it up. Take the cover away to expose the paper roll compartment and the thermal print engine. Put the paper roll into the paper roll compartment in the direction shown as above.
2 - 2 thermal print engine and try to aim the front end of the paper roll toward the rear insert slot. When the front end is inserted into the rear insert slot, close up the head-up lever and turn the paper feed knob to roll the paper forward.
2 - 3 2. Manual paper feed You may also extend the front end of paper out of the paper exit slot of the top cover and put top cover back to the printer case.
2 - 4 B. CONNECTING CABLES 1. SERIAL CONNECTION All the external connectors are in the recessed area at the rear bottom. The serial connector is a 9 pin D sub Female connector at the left. Apply this cable only for serial application of the serial model.
2 - 5 2. PARALLEL CONNECTION The parallel connector is a 25 pin D sub Male connector at the rightmost location in the connector area. Apply this cable only for parallel model. 3. PERIPHERAL CONNECTION The peripheral controller is a RJ11 jack near the serial connector.
2 - 6 4. POWER CONNECTION The power connector is a 3 pin jack between the peripheral connector and the parallel connector. During insertion, be sure to hear the click to obtain a firm contact. CAUTION: Before doing the insertion or extraction of the power plug, be sure to pull the outer sleeve of the plug backward to release the internal latch.
2 - 7 6. SELF TEST Press and hold down the paper feed button while turning the on / off switch on. The printer will then perform a self test. A slip of self test result is printed below. Please note that the content of such print is always the same no matter what interface or communication protocol is used.
2 - 8.
3 - 1 III. MAINTENANCE AND INTERNAL PARTS A. MAINTENANCE GUIDE LINES • Always turn off and disconnect power before opening the cover. • The areas around the print head and motor become very hot during and just after printing, do not touch them.
3 - 2 C. PAPER JAM In case of paper jam, please open the top cover and push down the auto cutter assembly so that it could be easier to get the messed up portion of the thermal paper when the head-up lever is pushed down.
3 - 3 Head-up lever at up position Head-up lever at normal down position Push head-up lever further down Freeing the movement of the guide plate Pull the lug on guide plate backward to release the cla.
3 - 4 Guide slot of print head Gently move the print head along its guide slot out (do not damage the cabling to it and never do this when print head is still hot ), you can clean the thermal elements.
4 - 1 IV. SPECIFIC ATIONS A. PRINTER ITEM SPECIFICATION Printing method Thermal sensitive line dot method Effective printing width 72 mm Thermal head configuration 576 dots / line Printing speed (max.
4 - 2 C. POWER ADAPTOR ITEM REQUIREMENT INPUT VOLTAGE 100 V AC ~ 250 V AC INPUT FREQUENCY 50 ~ 60 HZ INPUT CURRENT 1.5 A MAX. OUTPUT VOLTAGE + 24 V DC OUTPUT POWER 52 W MAX.
5 - 1 V. TECHNICAL INFORM ATION A. INTERFACES 1. SERIAL INTERFACE a. RS232 The standard serial interface applicable to PP4000S is RS232. The communication protocols in RS232 are: 19200 bps, none parity, 8 data bits, 1 stop bit. These settings are fixed, not for change.
5 - 2 2. PARALLEL INTERFACE The communication interface applied in PP4000C is the Centronics parallel interface using a 25 pin D sub male connector with the following pin assignments: Pin # Definition Pin # Definition Pin # Definition 1 -STROBE 10 -ACK 18 GND 2 D0 11 BUSY 19 GND 3 D1 12 P.
5 - 3 PIN # Definition Description 1 FG Frame ground 2 CRB Drawer kick for cash drawer controlled by software command Esc p 0 n1 n2 3 SENSE Input peripheral status 4 VCC + 24 V DC supply 5 CRA Drawer kick for cash drawer controlled by software command Esc p 1 n1 n2 6 SG Signal ground B.
5 - 4 When the bottom metal plate is removed by a qualified technician, you can see the control board from the bottom as shown in the above picture. Please be reminded that such operation, if not done by a qualified technician, voids the warranty.
5 - 5 C. SOFTWARE COMM ANDS Codes (HEX / CONTROL ) : COMMAND NAME (1) 09 / <HT> : Horizontal tab (2) 0A / <LF> : Line feed with printing (3) 0C / <FF> : Forms feed (4) 1B 19 n / <.
5 - 6 (17) 1B 44 [d] k 00 / <ESC> “ D ” [d] k <NUL> : Horizontal tab position setting (18) 1B 4A n / <ESC> “ J ” n : Printing and minimum - pitch - unit paper feed (19) 1B 4B.
5 - 7 (39) 1D 26 m x y 1 y 2 [d] k / <GS> “ & ” m x y 1 y 2 [d] k : Registration of image data (40) 1D 27 m n / <GS> “ ’ ” m n : Print registered image data (41) 1D 3C / <.
6 - 1 VI. CHARACTER CODE PAGES A. PAGE 0 ENGLISH / J APANESE.
6 - 2 B. PAGE 1 ENGLISH / EUROPEAN ( In these tables, “ SP ” indicates a space.) Note: 1. Each code is represented in hexadecimal notation. 2. If an undefined code (<00> to <1F>) or an undefined <ESC>, <FS>, or <GS> sequence listed in this table is received, an abnormal operation may occur.
6 - 3 data, character registration data, or command parameters are received, they are handled as ordinary data.).
Ein wichtiger Punkt beim Kauf des Geräts Epson PP4000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Epson PP4000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Epson PP4000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Epson PP4000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Epson PP4000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Epson PP4000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Epson PP4000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Epson PP4000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Epson PP4000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
