Benutzeranleitung / Produktwartung 3000 des Produzenten Epson
Zur Seite of 40
A Product Of High Res Solutions Hesperia, CA. 92345 T oll Free 800-640-2768 • fax 760-947-1380 HighResSolutions.com • HighResSolutions@msn.com Hy-Rez QuikRIP is protected by international copyright law.
A Product of High Res Solutions 1 1355 Mariposa Road • Hesperia, CA 92345 T oll Free 800-640-2768 •Fax 760-947-1380 HighResSolutions.com • HighResSolutions@msn.
Quite simply , Hy-R ez QuikRIP is a set of highly calibrated configur a- tion settings and postscript printer description files that run within CADlink PhotoScript. These allow an ordinary Epson 3000 or 1520 ink jet printer to gener- ate accurate imagesetter-style film positives for use within the screen printing industry .
Installing Hy-Rez QuikRIP - Windows When the PhotoScript installation is complete, after your computer has been restarted, and the port has been selected for your printer , it s time to install Hy-Rez-QuikRIP . (Y oull be prompted to select a port at restart, choose LPT1 on a PC) Insert the Hy-Rez QuikRIP CD and run the installer .
Running The Updater - Windows The final step to install- ing is to update the system PPDs to match the custom PPD s the installer has placed on the Desktop. Open the folder on the CD named Updater Windows QuikRIP and double click the QuikRIP PPD Updater .
Here are the 5 custom print modes youll be using. The names of these modes are: Hy-Rez QuikRip 1 Hy-Rez QuikRip 2 Hy-Rez QuikRip 3 Hy-Rez QuikRip Dark Hy-Rez QuikProof The QuickRip 1 setting is most likely the one of choice if you have difficulty in controlling dot gain on press.
Running Hy-Rez QuikRIP - Windows Double-click the Hy-Rez QuikRIP icon on your desktop to launch the RIP . The below window will appear . Time to launch may vary greatly depending on your computer .
This launches the PhotoMatch Screen. If only one ink jet model is installed, the printer name will default to it. 8.
Under the File menu select Open PrintMode . A dialog box will appear containing the 5 custom Hy-Rez QuikRIP modes in addi- tion to the default modes included with PhotoScript.
The next step is to load these settings into the RIP . From the File menu select Send Settings 10.
Once Send Settings has been initiated, you will notice activity in the original PhotoScript screen. These printer configurations have now been loaded into the RIP and are awaiting instructions from the graphics application used to output the art.
Printing With Hy-Rez QuikRIP - Windows Y ou have made it through the hardest part and printing from within an application is no different than what youve done in the past. The RIP functions basically like a postscript laser printer attached to your system so no special knowledge is required to print using your ink jet along with the RIP .
Do not relocate the PhotoScript Folder to another location on your hard drive. It must remain where the installer has originally placed it. If you decide to read the PhotoScript manual, you must still use our technique to print using the RIP and not CADlinks.
Printing With Hy-Rez QuikRIP - Windows Selecting The Printer and PPD File The graphic below does not show the original Epson 3000 printer driver from the manufacturer , it does howev er illustrate the correct file to choose. This screen shot is from Illustrator 8.
The graphic below displays the correct PPD file being chosen. 15.
After the PPD has been selected and loaded, you may now apply advanced printing instructions to the graphic. Once satisfied with the settings just click print! W eve used Adobe Illustrator in these examples. The settings within other applications may appear different but work in a similar fashion.
Expect the films to require considerable time to process. If youre accustomed to a postscript laser printer , the time required to print a set of separations will seem very long. Separations could take 10 minutes per color depending on complexity , film size, coverage, etc.
Troubleshooting Hy-Rez QuikRIP Windows & Macintosh For the most part, weve had very little difficulty with PhotoScript along with Hy-Rez QuikRIP but there are a few matters that might show up. Problem: The RIP doesnt recognize the USB dongle.
Problem: (Mac) I cant select my laser printer or alternate print- ing device! Im only allowed to print using the Epson PhotoScript printer. First turn your laser printer on. Then use the Chooser and once again select the correct printer driver and alternative printer .
Quite simply , Hy-Rez QuikRIP is a set of highly calibrated configuration settings and postscript printer description files that run in CADlink PhotoScript. These allow an ordinary Epson 3000 or 1520 ink jet printer to generate accurate imagesetter-style film positives for use within the screen printing industry .
Installing Hy-Rez QuikRIP - Macintosh After the PhotoScript installation is complete and your computer has been restarted, it s time to install Hy-Rez-QuikRIP . Insert the Hy-R ez QuikRIP CD and run the Mac installer . Although not required to restart again following the installation of Hy-R ez QuikRIP , we recommend that you do so.
Running The PPD Updater - Macintosh Open the folder on the CD named QuikRIP Updater and double click the QuikRIP PPD Updater . Y our system PPD s have now been updated and now match the custom PPD the installer has placed on the Desktop.
Here are the 5 custom print modes youll be using. The names of these modes are: Hy-Rez QuikRip 1 Hy-Rez QuikRip 2 Hy-Rez QuikRip 3 Hy-Rez QuikRip Dark Hy-Rez QuikProof The QuickRIP 1 setting is most likely the one of choice if you have difficulty in controlling dot gain on press.
Setup Hy-Rez QuikRIP - Macintosh Once the RIP is launched, locate the Options Menu and choose Out- put Selection. Within the Output Selection Window choose the installed printer the RIP will utilize, such as the Epson 3000 and select the Port the device is attached to.
Setup Desktop Printer - Macintosh The creation of a Desktop Printer is required on a Macintosh for correct use of the RIP . A Desktop Printer basically defines a given printer installed and assures the proper output settings are avail- able within applications used to image to the device.
After the window at the left appears, make certain to select PhotoScript 8.7 and then choose PhotoScript Lite (Direct) to create the Desktop Printer with.
Select the correct PPD within the window at left. If for any reason the proper Epson PPD does not appear in the list, navigate to the desktop, open the Epson PPDs folder and choose the PPD for the installed printer . Now save the desktop printer . In the example below weve named the desktop printer Epson 3000.
The new Desktop Printer Icon is now visible on the desktop. Printing From An Application - Macintosh First open the Chooser from the Apple Menu and select the PhotoScript 8.7 Printer Driver . Upon selecting Print from within your application, the print dialog box will appear .
Now select the desired Hy-Rez QuikRIP Mode within the Print Mode Menu. 29.
The graphic below outlines the procedure to load the PPD file. First select the current application, in this example Adobe Illustrator 9.0 then click Separation Setup. When the Separations Window appears, click Open PPD and find the correct PPD file. In our example the PPD to select is Epson Color Stylus 3000.
After the PPD has been loaded, you will have access to advanced printing functions such as selecting desired colors, line screen frequency , screen angles, etc. W eve used Adobe Illustrator in these examples. The settings within other applications may appear different but work in a similar fashion.
Expect the films to require considerable time to process. If youre accustomed to a postscript laser printer , the time required to print a set of separations will seem very long. Separations could take 10 minutes per color depending on complexity , film size, coverage, etc.
Recommended Line Screens & Angles Recommended Line Screens and Angles Simulated Process, Complex Vector Art: White Underbase * 50 LPI - 56 Degrees Highlight White 50 LPI - 56 Degrees All T op Colo.
Once the color separations or basic art has been completed and youve decided on which channels are to be imaged as film positives, it s time to make a choice on the method used to output the films. Basically there are two methods. The easiest is to simply output the films from within Photoshop.
T o print the individual color channels from within Photoshop, first select each spot channel required for output within the channels palette by turning on the eye next to the channel name. Next choose Page Setup from the File Menu and select the printer to be used with the RIP .
Photoshop has now been configured to output the file. Select Print from the File Menu. On the bottom of the print dialog box, make certain the Print Space Profile is set to Separations. If this step is omitted, the halftone s may not image correctly .
T o output the films from an external source such as an Illustr ation or Page Layout program, your file must be exported from Photoshop as a DCS 2.0 File. In order to do this, it s advisable to work on a duplicate file. When working on the duplicate delete any of the RGB channels by selecting and dragging to the trash.
Printing a DCS 2.0 file from a Page Layout or Illustration program is exactly the same as printing any multi-color document. Once imported or placed into the external program, just select each channel for output and apply a screen frequency and angle to each along with the other usual settings such as page size, orientation, printer selection, etc.
Select the Page Setup Button and choose page size and orienta- tion. Selecting the Screen Button brings up the Halftone Screens Box. Choose each color and apply a halftone Frequency , Angle and shape.
Select the Print Button from within Print Options and choose the current application, in this case Adobe Photoshop 6.0.1. Make certain the Print Space Profile box is set to Separations. The halftones may not image correctly if this step is omitted.
Ein wichtiger Punkt beim Kauf des Geräts Epson 3000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Epson 3000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Epson 3000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Epson 3000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Epson 3000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Epson 3000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Epson 3000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Epson 3000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Epson 3000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
