Benutzeranleitung / Produktwartung EPTL09706.1 des Produzenten Epic Fitness
Zur Seite of 30
USER'S MANUAL CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. EPTL09706.1 Serial No. Find the serial number in the location shown below.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. It is the responsibility of the owner to ensure t hat all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
21. Do not change the incline of the treadmill by p lacing objects under the treadmill. 22. When folding or moving the treadmill, make sure that the frame is held securely by the pin o n the latch knob. 23. Inspect and properly tighten all parts of the t readmill regularly.
5 W ARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
6 Thank you for selecting the revolutionary EPIC ™ VIEW 5 50 treadmill. The VIEW 550 treadmill offers an im- pressive selection of features designed to make your workouts at home more enjoyable and effective.
7 ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. D o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
8 2. Identify the Left Upright (73) and the Right Upright (74). Hold the Right Upright near the R ight Base Cover (77) as shown. Insert the Upright Wire Harness (75) up through the rec- t angular hole in the bottom of the Right Upright and out of the top of the Right Upright.
9 4. With the help of a second person, hold the con- sole assembly near the Uprights (73, 74). Connect the Upright Wire Harness (75) to the C onsole Wire Harness (71). M ake sure to con- nect the connectors properly (see the inset drawing). The connectors should slide to- gether easily and snap into place.
10 8. Note the location of the 75 ohm antenna terminal and the audio/video input jack on the treadmill. For the television to operate, the included Audio/Video Wire Harness (115) and your DVD player o.
1 1 1. Make sure that the power cord is unplugged. Remove the indicated 3/4” Screws (4) from the Pulse Receiver Cover (70) on the back of the Console Assembly (A). 2. Next, hold the receiver so the small cylinder is oriented as shown. Attach the receiver to the Pulse Receiver Cover (70) with the two included Small Screws (B).
12 HOW TO CONNECT AN ANTENNA Indoor Antenna 1. Place a VHF antenna in the desired loca- tion. Connect the 300 ohm fl at wire from the antenna to a 300 ohm to 75 ohm adapter. 2. Push the 300 ohm to 75 ohm adapter onto the 75 ohm an- tenna terminal on the treadmill frame near the power cord.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- i cone spray or other substances to the walking b elt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
14 FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec - tive and enjoyable. When the manual mode of the con - sole is selected, the speed and i nclin e of the t readm ill can be changed with the touch of a button.
15 H OW TO TURN ON THE POWER Plug in the power cord (see page 13). Next, l ocate the reset/off cir- cuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill.
16 Select a display mode and follow your progress with the exercise information on the screen. As you walk or run on the treadmill, the screen can d isplay the following exercise information: • The elapsed time. Note: When a program is se- lected, the screen will show the time remaining in the program instead of the elapsed time.
17 H OW TO USE A PRESET PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 15. Select a preset program. To select a preset program, press the Walking Programs (Walking Pgms.
18 H OW TO OPERATE THE PERSONAL TELEVISION IMPORTANT: Before operating the television, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the tread- m ill, a VCR or DVD player to the three audio/video RCA jacks, or a personal audio/video player to the audio/video jack below the television on the con- sole.
19 H OW TO USE THE INFORMATION MODE The console features an information mode that allows you to view treadmill usage information, select a sys- t em of measurement for the console, and turn on and t urn off the demo mode.
20 THE OPTIONAL CHEST PULSE SENSOR A n optional chest pulse sensor offers hands-free oper- ation as it monitors your heart rate during your work- o uts. T o purchase the optional chest pulse sensor, call the toll-free telephone number on the front cover of this manual.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE B efore folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be- come permanently damaged. Remove the key and unplug the pow er cord.
22 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
23 Next, locate the Reed Switch (14) and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley u ntil the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and t he Reed Switch is about 1/8”. I f necessary, loosen the indicated Screw (29), move the Reed Switch slightly, and then retighten the Screw.
24 PROBLEM: The incline of the treadmill does not change correctly S OLUTION: a . With the key in the console, press one of the Incline buttons. W hile the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the m aximum incline level and then return to the minimum level.
25 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
26 P ART LIST—Model No. EPTL09706.1 R 0107A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No.
27 Key No. Qty. Description Key No. Qty. Description 99 1 Handrail 100 1 Latch Assembly 101 1 Latch Warning Decal 102 1 AV Wire Nut 103 1 Filter Wire 1 04 1 Lift Motor Bolt 105 2 Rear Roller Washer 10.
28 31 20 29 14 26 27 21 22 38 23 104 79 1 9 10 101 62 60 105 56 58 4 6 47 100 62 10 57 7 8 7 39 38 40 29 54 29 59 12 15 16 19 18 51 38 53 4 4 17 32 35 33 33 43 36 69 37 18 17 19 16 15 2 2 1 13 29 1 1 .
99 94 89 73 74 83 38 86 85 87 87 29 92 91 93 86 85 38 69 84 64 127 38 38 82 81 82 81 82 81 95 96 90 64 64 90 90 70 4 94 75 65 67 75 63 64 90 1 14 1 14 4 4 4 4 4 4 82 81 4 4 4 4 4 80 4 49 76 77 4 4 4 4.
Part No. 249426 R0107A Printed in USA © 2007 ICON IP, Inc. LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame is warranted for a lifetime.
Ein wichtiger Punkt beim Kauf des Geräts Epic Fitness EPTL09706.1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Epic Fitness EPTL09706.1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Epic Fitness EPTL09706.1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Epic Fitness EPTL09706.1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Epic Fitness EPTL09706.1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Epic Fitness EPTL09706.1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Epic Fitness EPTL09706.1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Epic Fitness EPTL09706.1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Epic Fitness EPTL09706.1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
