Benutzeranleitung / Produktwartung ECB9500 des Produzenten EnGenius
Zur Seite of 71
1 1N Wireless Gigabit Multi-Function Client Bridge User ’ s Manual V ersion: 1.0.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 2 T able of Content s 1 INTRODUCTION ............... ................................................... .......................... ....................... ................ 5 1.1 F EA TURES AND B ENEFITS .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 3 T able of Content s 3.2.5.5.1 S TAT U S ............................. ....................................... ................................ ........................... ....46 3.2.5.5.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 4 Revision History V ersion D ate Notes 1.0 July 12, 2008 Initial V ersion.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 5 1 Introduction The Multi-function Gigab it Wireless-N Client Bridge is an 802.1 1n-draft compliant devic e that delivers up to 6x faster speeds than 802.1 1g while stay ing backward comp atible with 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 6 SSID) in AP mode administrator to assign different policies for specific user grou ps.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 7 1.3 Safety Guidelines In order to reduce the risk of fire, electric shock and injury , please adhere to t he following saf ety guid eline s. h Carefully follow the instructions in this manual; a lso follow all instruction labels on this device.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 8 Network managers in dynamic env ironments can minimize the overhead caused by moves, extensions to networks, and other changes with wireless LANs.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 9 2 Understanding the Hardware 2.1 Hardware Installation 1. Place the unit in an appropriate loc ation after conducting a site survey. 2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 10 2. Select Internet Protoc ol (TCP/IP) and then click on the Properties button. This will allow you to c onfigure the TCP/ IP settings of y our PC/Notebook. 3. Select Use the following IP Address radio button and then enter the IP address and subnet mask.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 11 3 Web Configuration 3.1 Logging In To configure the device through the web-browser, enter the IP ad dress of the Bridge (def ault : 192.168.0.1 ) into the add ress bar of the web-browser and pr ess Ent er .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 12 3.2 S ystem Click on the System link on the na vigati on drop- down menu. You will then see four options: Status, Schedule, Event Log, and Monitor. Each option is described in detail below.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 13 3.2.1 Status Click on the Sta tus link under the System drop-down menu. The status page displays a summary of current s ystem settings.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 14 Click on the Add button to add a new schedul e. . Schedule Description : Specify a name for the schedule. Service : Se lect a se rvice. Days : Select the days at which you would like the sched ule to be effective.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 15 Save: Click on the Sa ve button to save the log into a text file on your computer. Clear: Click on the Clear button to clear the log on the screen. Refresh: Click on the R efresh button to refresh the log.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 16 3.2.5 Wireless Operating Modes Click on the Wireless link on the navigation drop-down menu. In this section y ou may select the operating mode of the device. Options available are: Access Point, Client Bridge, WDS, or Repeater.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 17 3.2.5.2 Access Point Operating Mode In order to c onfigure the device as an Access Point, se lect Access Point from the Operating Mode drop-down list. A dialog box will appear to notify you that the system will restart in order for the change to take effe ct.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 18 • Radio : Choose to Enable or Disable the wireless radio. • Band : Select the IEEE 802.11 mode from the drop-down list. For exampl e, if you are sure that the wireless network will be using only IEEE 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 19 3.2.5.2.3 Advanced Click on Advanced link under the Wireless dro p-down menu. This page allows you to configure the fragm entation threshold, RTS threshold, beacon perio d, transmit power, DTIM in terval, etc.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 20 Preamble Type : Select a short or long preamble. For optimum performance it is recom mended to also configure the clien t device as the same preamb le type. CTS Protection : CTS (Clear to Send) can be always ena bled, auto, or disabled.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 21 3.2.5.2.4.2 WEP (Wired Equivalent P rivacy) Click on the Security link under the Wireless drop-down menu. WEP is an acronym for Wired Equivalent Privacy, and is a security protocol that provides the same level of security for wi rele ss networks as for a wired netwo rk.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 22 Encryption : Select WEP from the drop-down list. Authentication Type: Select Open , or Shared Key .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 23 ESSID S election : A s this device supports multiple SSID s, it is possible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 24 ESSID S election : A s this device supports multiple SSID s, it is possible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 25 Setup button on the device. The device acts as a registrar for the network, although other devices may act as a re gistrar as well.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 26 3.2.5.2.6 Client List Click on the Client List link under the Wireless drop-down menu. This page displays the li st of C lient s that are ass oci ated to t he Acc ess P oint . The MAC address and signal strength for each client is displayed.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 27.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 28 3.2.5.3 Client Bridge Operating Mode In order to configure the device as an Access Point, se lect Client Bri dge from the Operating Mode drop-down list. A dialog box w ill appear to notify you that the system will restart in order for the change t o take effe ct.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 29 • Radio : Choose to Enable or Disable the wireless radio. • Mode : This drop-down list is fixed to Client as this is the Client Bridge operating m ode. • Band : Select the IEEE 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 30 3.2.5.3.3 Wireless Security Mode Click on the Security link under the Wireless drop-down menu. To protect your privacy this mode supports several ty pes of wireless security: WEP WPA, WPA2, and 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 31 HEX for use over the network. Four keys can be defined so that you can change keys easily.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 32 (hexadecimal - using charact ers 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 33 WPA Mode : Select the Aut o WPA / WPA2 from the drop-d own list. WPA Type : Select TKIP, AES, or WPA2 Mix ed. The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 34 Broadcast SSID : Select Enable or Disable from the drop-down list. This is the SSI D broad cas t featur e. When this option is set to Enab le, your wireless network name is broadcast to anyon e within the range of your signal .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 35 Pre- shar ed K ey Ty pe: : Select Pa ssphrase from the drop-down list. Pre-Shared Ke y : The key is entered as a pass-phrase of u p to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 36.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 37 3.2.5.4 WDS Operating Mode In order to configure the device as an Access Poin t, sele ct WDS from the Operating Mode drop - down list. A dialog box w ill appear to notify you that the system will restart in order for the change t o take effe ct.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 38 • Radio : Choose to Enable or Disable the wireless radio. • Mode : This drop-down list is fixed to WDS as this is the Wireless Distribut ion operating mode. • Band : Select the IEEE 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 39 3.2.5.4.3 Advanced Click on Advanced link under the Wireless dro p-down menu. This page allows you to configure the fragm entation threshold, R TS threshold, beacon p eriod, transmit power, DTIM in terval, etc.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 40 CTS Protection : CTS (Clear to Send) can be always ena bled, auto, o r disabled. By enabled CTS, the Access Point and clients will will wait for a ‘clear’ signal before transmitting.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 41 3.2.5.4.4.2 WEP (Wired Equivalent P rivacy) Click on the Security link under the Wireless drop-down menu. WEP is an acronym for Wired Equivalent Privacy, and is a security protocol that provides the same level of security for wi rele ss networks as for a wired netwo rk.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 42 Encryption : Select WEP from the drop-down list. Authentication Type: Select Open , or Shared Key .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 43 ESSID S election : A s this device supports multiple SSID s, it is possible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 44 ESSID S election : A s this device supports multiple SSID s, it is possible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 45 3.2.5.4.6 WMM (Wireless Multimedia) Click on the WMM link under the Wireless drop-down men u. WMM is Quality of Service (QoS) for wireless and ensur es that voice and video applications get priority in order to run smoothly.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 46 Once the device has restarted into Repeater mode, you will see a new drop-down menu with six options w hich are: Status, B asic, Advanced, Sec urity, Client List, and WMM. Each of the options is described in detail be low.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 47 • Band : Select the IEEE 802.11 mode from the drop-down list. For exampl e, if you are sure that the wireless network will be using only IEEE 802.11g cl ients, then it is recommended to select 80 2.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 48 Fragment Threshold : Packets over the s pecified size will be f ragmented in order to improve performance on noisy networks. Specify a value between 256 and 65 535. The default value is 2346.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 49 3.2.5.5.4 Wireless Security Mode Click on the Security link under the Wireless drop-down menu. To protect your privacy this mode supports several ty pes of wireless security: WEP WPA, WPA2, and 802.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 50 ESSID S election : As this device supports multiple SSIDs, it is poss ible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID : Select Enable or Disable from the drop-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 51 Information Interchange - alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. WEP Key 1-4: You may enter four diff erent WEP keys.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 52 WPA Ty pe : Sel ect TKIP , AES , or WPA2 Mixed . The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 53 broadcast to anyon e within the range of your signal . If you're not using encryption then they could connect to your network. When this is disabled, you must en ter the Wireless Network Name (SSID) on the client manually to connect to the network.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 54 3.3 N etwor k Click on the Network link on the navigation drop- down menu. You will then see three options: Status, LAN, and WAN. Each optio n is described in detail below . 3.3.1 Status Click on the Status link on the Network navigation drop-down me nu.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 55 3.3.2 LAN / DHCP Client, Server Click on the LAN link on the Netw ork navigation drop-down menu. This page will allow you to configure the device as a static or dynamic IP address, along with DHCP server settings.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 56 3.3.3 WAN (Bridge/Router) Click on the WAN link on the Network navigation drop-down menu. This device can be configured at a Router or a Bridge. Select Ena ble (Router) mode if the WAN port is connected to the Inter net.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 57 3.3.3.2 WAN – Dynamic IP address Th e WAN interface can be configured as a DHCP Client in which the ISP provides the I P addr ess t o the dev ice. This is als o know n as Dy namic IP.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 58 3.3.3.3 WAN – PPPoE The WAN interface can be configure d as PPPoE. This ty pe of connection is usually used for a DSL servic e and requires a username and passw ord to connect. Login Method : Selec t PPPoE fro m th e dro p-down list.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 59 3.3.3.4 WAN – PPTP The WAN interface can be configured as PP TP. PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Euro pe.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 60 set too high, packets will be fragmented downstream. If the router's MTU is set too low, the router will fragment p ackets unnecessarily and in extreme cases may be unable to establish some connections.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 61 3.4.2 SNMP Click on the SNMP link on the Manageme nt navigation drop-down menu. This option allows you to assign the contact details, location, community name and trap settings for SNMP.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 62 Ensure that you have downloaded the approp riate firmware from the vendor’s website. Connect the device to your PC using an Ethernet cable, as the firmware cannot be upgraded using the wireless interface.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 63 3.4.5 Backup Settings Click on the Configure link in the navigation menu Click on the Save button to backup the current settings on the local disk.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 64 3.5 Tools Click on the Tools link on the navigation dro p- down menu. You will then see four op tions: Time zone, power saving, diagnosis, and reset. Each option is described in detail below.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 65 3.5.2 Power Saving Click on the Power Saving link in the navigation menu. This page allows you to enable power saving on th e wired and wire less interface. WLAN: Choose t o Enable or Disable the wireless LAN power saving mo del.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 66 Appendix A – Specifications Hardware Summary Physical Interface LAN: One 10/100/1000 Mbps Reset Button Power Jack WPS push button (W.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 67 Software Features T o pology In frastructu re/Ad-Hoc Operation Mode Client Bridge/Access Po int/Repeater/WDS/PtP LAN • DHCP Server .
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 68 Management Configuratio n W eb-based configur ation (HTTP)/T elnet Firmware Upgrade Upgrade firmware via web -browser Keep latest sett.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 69 Appendix B – FCC Interference Statement Federal Communication Commission Interference St atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 70 Index 8 802.1x, 2, 3, 6, 20, 22, 23, 30, 32, 3 3, 40, 42, 43, 49, 51, 52, 68 A Access Point Operating Mode, 17 admi n, 1 1 Advanced, 2.
Multi-Function Gig abit Wireless- N Client Bridge V ersion 1.0 71 T ools, 3, 1 1, 13, 65 Tr ap , 6 2 Tx Power, 20, 40 , 49 V VLAN, 2, 1 1, 17, 26, 68 W W AN, 3, 9, 1 1, 15, 55, 56, 57, 58, 59, 6 0 WDS.
Ein wichtiger Punkt beim Kauf des Geräts EnGenius ECB9500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie EnGenius ECB9500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EnGenius ECB9500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EnGenius ECB9500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EnGenius ECB9500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EnGenius ECB9500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EnGenius ECB9500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EnGenius ECB9500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EnGenius ECB9500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
