Benutzeranleitung / Produktwartung ECB-3220 des Produzenten EnGenius
Zur Seite of 54
1 1b/g W ireless Client Bridge/AP User ’ s Manual V ersion: 2.1.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 2 T able of Content s 1 INTRODUCTION ............... ................................................... .......................... ....................... .......... ...... 5 1.1 F EATURES & B ENEFITS .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 3 3.10.2 A DVANCED S ETTINGS ...................... ................................. .......................... ......................... ......43 3.10.3 S ECURITY ........................................
1 1b/g Wireless Client Bridge/AP V ersion 2.1 4 Revision History V ersion D ate Notes 1.36 April 26, 2006 2.00 January 24, 2007 PM Editing 2.1 June 19, 2007.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 5 1 Introduction The Wireless Bridge/Clie nt Router/AP/Repea ter device operates seamless ly in the 2.4 GHz frequenc y spectrum supporting the 802.1 1b (2.4GHz , 1 1Mb ps) and faster 802.1 1g (2 .4GHz, 54Mbps) wireless standards.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 6 User isolation support (AP mode) Protect the privat e netw ork betw een client users. PPPoE function sup port (CR mode) Easy to a ccess internet vi a ISP service authentica tion Power-over-Ether net (IEEE802.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 7 1.5 Applications The wireless LAN produc ts are easy to install and highly efficient. The following list describes some of the many appli cations made p.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 8 This is the simples t network co nfiguration w ith several computers equipped with the PC Cards that form a wireles s network whenev er they are within range of one another.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 9.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 10 2 Understanding the Hardware 2.1 Hardware Installation 1 Place the unit in an appropria te place after conducting a site survey. 2 Plug one end of the Ethernet cable i nto the RJ-4 5 port of the device and another end int o your PC/ Noteboo k.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 11 2. Select Internet Protocol (TCP/IP) and then click on the Properti es butto n. This will allow you to configure the TCP/IP settings of your PC/Notebook. 3. Select Use the following IP Address radio button and then enter the IP address and subnet mask.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 12 3 Switch between Bridge/Bridge Router/ AP This device can be configured as a Bridge or Acces s Point. The default IP address of the device is 192. 168.1. 1 in Bridge mode. This chapter w ill describe the steps to switch from Bridge to Access Point and Ac cess Point to Brid ge.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 13 2 By default, a user name and password ha s not been configured . If you have configured a user name and password , please enter them into the field to continue 3 Once you have logged in, click on the Operation Mode link under the Management menu.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 14 4 Bridge/Bridge Router Mode – Web Configuration 3.3 Logging In To configure the Bridge through the web-browser, enter the IP ad dress of the Bridge (def ault : 192.168.1.1 ) into the addres s bar of the web-browser and pres s Ent er .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 15 System o U pti me: Duration of time since the device was l ast reset. o Firm ware ve rsion : Version of the firmware that is currently loaded o n the device. Wireless Configuration : o Mode : Wireless c onfiguration mode such as client bridg e, AP, or WDS.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 16 3.4 Management Click on the Management link on the navigation drop-down menu. You will then see five options: opera tion mo de, status , statis tics, l og, u pgrade firmware, save/reload settings, and passw ord.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 17 Please wait and then enter the specified IP address into the web-browser. The previous settings will be retained in AP mode. . Refer to Chapte r 5 to learn how to configure this device in Access Point mode .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 18 o State : The current state of the bridge. It may be scanning or ass ociated or disabled. o Signal Strength : The signal strength of the wireless device. o Noise Leve l : The level of interference. TCP/IP Configuration: o Attain IP Protocol : The IP address setting may be fixed or static.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 19 3.4.4 Log Cli ck on t he Log link under the Management menu. The Log page displays a list of events that are triggered on the Ethernet and Wireless interface.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 20 Clic k on the Browse button and then select the appropri ate firmware and then click on the Upload button. Note: The upgrade process may take about 1 minute to complete. Do not po wer off the device during this proc ess as it may crash the device and make it unusable.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 21 3.4.7 Password Clic k on t he Password link un der the Management menu. This option allows you to create a user name and passw ord for the device. By default, this device is configured without a user name and password.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 22 IP Address : Enter the IP address. Subnet Mask : Enter the subnet mask for the IP add ress. Default Gateway : Enter the IP address for the default gatewa y.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 23 3.6 Wireless Click on the Wireless link on t he nav igat i on drop-down menu. You will then see four options: basic settings, advanced settings security and site survey. Each option is described below.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 24 not required, however, when selecting Adhoc mode, you must select the same channel on all points. Enable Univer sal Repeater Mode : Select Enable to activate Universal Repeater Mode and type below SSI D for extended wireless interface.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 25 ACK Timeout : You may specify a value for the acknowledge timeout. Data Rate: Select a data rate from the drop-down list.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 26 3.6.3 Security Click on the Security link unde r the Wi reless menu. On this page you c an configure the authentication and encry ption settings such as WEP , WPA, and 80.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 27 3.6.3.2 WEP 64-bit / 128-bit Encryption : Select WEP from the dro p-down list if your wirel ess network uses WEP encryption. WEP is an ac ronym for Wired E quivalent Privacy , and is a security protocol that provides the same level of security for wireless networks as for a wired networ k.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 28 Key Length : Sel ect a 64-bit or 128- bit from the drop-down list. Key Format: Select a key format from the drop-down list. 64bit-hex keys require 10 char act ers , whe re as 128- bit key s re quir e 26 c har act ers .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 29 3.6.3.4 WPA / WPA2 RADIUS Authentication Encryption : Select WPA or WPA2 from the drop-down list if your wireless network uses this encryption. WPA (Wi-Fi Protected A ccess) was designed to improve upon the security features of WEP (Wired Equivalent Privacy).
1 1b/g Wireless Client Bridge/AP V ersion 2.1 30 3.6.4 Site Survey Click on the Site Sur ve y link under the Wireless menu. This page display s the list of Access Points in the coverage area and allows you to connect to them if you have the requ ired cr edentials.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 31 5 Access Point Mode – Web Configuration 3.7 Logging In To configure the Access Poin t through the web-browser, enter the IP address of the Bridge (d efault: 192.168.1.2 ) into the address bar of the web-browser and press Enter .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 32 System o U pti me: Duration of time since the device was l ast reset. o Firm ware ve rsion : Version of the firmware that is currently loaded on the device. Wireless Configuration : o Mode : Wireless c onfiguration mode such as client bridg e, AP, or WDS.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 33 3.8 Management Click on the Management link on the navigation drop-down menu. You will then see five options: opera tion mo de, status , statis tics, l og, u pgrade firmware, save/reload settings, and passw ord.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 34 Please wait and then enter the specified IP address into the web-browser. The previous settings will be retained in AP mode. . Refer to Chapter 4 to learn how to configure this device in Bridge/Bridge Router mode.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 35 o Associated Clients : Display s the number of clients currently associated t o the Access Point. TCP/IP Configuration: o Attain IP Protocol : The IP address setting may be fixed or static. o IP A ddress : Displays the current IP address of the LAN port.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 36 In order for the log to record all the events, you must first place a check in the Enable Log or Enable Remote Log (Log Server required) ch ec k box. Select system all or wi r e l es s depending o n the type of events you want recorded.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 37 Click on the Save button t o save the current settings to a file on the local disk. Click on the Browse bu tton to select the settings file and then click on the Upload button to load the previously s aved settings.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 38 3.9 TCP/IP Settings Click on the TCP/IP Settings link on the navigation drop-down menu. You will then see t he LA N Int erf ace an d SN MP opt ion . The options are described in detail below. 3.9.1 LAN Interface Click on the LAN Interface link under the TCP/IP Settings menu.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 39 address, subnet mask, and default gateway fields. If the DHCP option is Disabled , then the IP address, subnet mask, and default gateway f ields must be filled in. 802.1d Spanning Tree : Select Ena bled from the drop-down list if you if you would like to use the spanning tree feature.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 40 3.9.1.3 DHCP Server IP Address : Enter the IP address. Subnet Mask : Enter the subnet mask for the IP address. Default Gateway : Enter the IP address for the default gatewa y. DHCP : Select Server from the drop-down list since t his device is the DHCP server.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 41 3.9.2 SNMP Settings SNMP Daemon: Select Enable if you would like to use the SNMP feature. Read-Only Community Name : Specify the password for access the SNMP community for read only access.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 42 3.10.1 Basic Settings Click on the Basi c Sett ing s link under the Wire less menu. Using this option you may configure the 802.11b/g sett ings as well as the frequency , channel, and SSID. Band : Select the IEEE 802.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 43 3.10.2 Advanced Settings Click on the Advanced Settings link under the Wireles s menu. On this page you can configure the advanced set tings to tweak the performance of your wireless network.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 44 Beacon Interval : Beacons will be sent out t o devices at the specified int ervals. This value is measured in millis econds (ms). ACK Timeout : You may specify a value for the acknowledge timeout.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 45 3.10.3 Security Click on the Security link unde r the Wi reless menu. On this page you c an configure the authentication and encry ption settings such as WEP , WPA, and 802.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 46 3.10.3.2 WEP 64-bit / 128-bit Encryption : Select WEP from the dro p-down list if your wirel ess network uses WEP encryption. WEP is an ac ronym for Wired E quivalent Privacy , and is a security protocol that provides the same level of security for wireless networks as for a wired networ k.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 47 Key Length : Sel ect a 64-bit or 128- bit from the drop-down list. Key Format: Select a key format from the drop-down list. 64bit-hex keys require 10 char act ers , whe re as 128- bit key s re quir e 26 c har act ers .
1 1b/g Wireless Client Bridge/AP V ersion 2.1 48 3.10.3.4 WPA / WPA2 / WPA 2 Mixed RADIUS Authentication Encryption : Select WPA , WP A2 or WPA2_Mixed from the dr op-down list if your wireless network uses this encry ption. WPA (Wi-Fi Protected Access ) was designed to improve upon the security features of WEP (Wired Eq uivalent Privacy ).
1 1b/g Wireless Client Bridge/AP V ersion 2.1 49 3.10.4 Access Control Click on the Access Conrol link under the Wireles s menu. On this page y ou can filter the MAC address by allowing or block ing access the network.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 50 3.10.5 WDS Click on the WDS link under the Wireless menu. On this page you can configure the WDS (Wireless D istribution System) which allows the Access Point to funct ion as a repea ter. Enable W DS: Place a check in this box to enable this feature.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 51 Encryption : Sele ct WEP 64bits, WEP 128b its, WPA (TKIP) or WPA2 (AES) from the drop-down list if your wireless network uses a specific encryption. Key Format: Select a key format from the drop-down list.
1 1b/g Wireless Client Bridge/AP V ersion 2.1 52 Appendix A – Specifications Data Rate s 1, 2, 5.5, 6, 9, 1 1, 12, 18, 24, 36, 48, 54 Mbp s St andar ds IEEE802.
1 1g Wireless Multi-Client Bridge /AP/WDS V ersion 1.0 53 Appendix B – FCC Interference Statement Federal Communication Commission Interference St atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1 1g Wireless Multi-Client Bridge /AP/WDS V ersion 1.0 54 Appendix C – IC Statement IC st atement Operation is subje ct to the fol lowing tw o conditions : This device may not cause interfere nce and This device must accept any interference, including interference that may caus e undesired operation of the device.
Ein wichtiger Punkt beim Kauf des Geräts EnGenius ECB-3220 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie EnGenius ECB-3220 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EnGenius ECB-3220 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EnGenius ECB-3220 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EnGenius ECB-3220 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EnGenius ECB-3220 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EnGenius ECB-3220 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EnGenius ECB-3220. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EnGenius ECB-3220 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
