Benutzeranleitung / Produktwartung LTV46DA des Produzenten Energy Speaker Systems
Zur Seite of 48
LT V46DA User's Manual 1025_A50-095300_Eng-cover 10/27/06 9:43 PM Page 1.
1025_A50-095300_Eng-cover 10/27/06 9:43 PM Page 2.
■ Conformity ............................................................................................................................................... 3 Disposal .................................................................................
Reduce Noise ......................................................................................................................................... 23 Channel Groups ..................................................................................
Conformity 3 3 English Conformit y Disposal This product fulfills the EC guidelines 89/336/EEC (EMC guideline) with amendments 93/68 EEC and 92/31 EEC and the EC guideline 73/23/EEC (low voltage guideline) with amendments 93/68/EEC. This product is subject to the European guideline 2002/96/EC.
4 Unpacking and Setup Please check, that the delivery is complete. 1 Unit 2 Remote control 3 Batteries 4 Mains cable • Read the following instructions carefully . • Keep this manual at hand. • Closely follow the instructions given. • Proceed exactly as described in the instructions.
English 5 Unpacking and Setup • Only use suitable stands, supports, carts or tables that ensure the unit does not tip over . If you place the unit on a cart, move it with caution to prevent injuries or damage resulting from tip-over . • Unplug the unit during lightning storms or if you will not use it for a longer period of time.
6 Unpacking and Setup ➣ The Best Distance ➣ Background Light/Reflections When watching television at night, the television should not be the only source of light in the room. The big difference of brightness between the screen and the background causes continuous dark-light adaptation of the eyes.
English 7 V iewing the Control Panels Viewing the Control Panels Front View Rear View 1 AV S-VIDEO Input 2 AV AUDIO Input 3 AV VIDEO Input 4 Headphone Jack 5 Analog RGB Input (PC) 6 Audio Input (PC) 7.
8 Remote Control Remote Control 13 T emporary Sound Mute 14 TV Input Source Selection 15 External Source Input Selection 16 Picture Size Selection 17 Previous Channel 18 TV Information Display 19 Soun.
English 9 Connections and Start of Operation Connections and Star t of Operation Connections for TV Reception Connecting a Satellite Receiver , a Set T op Box or a Video Recorder Y ou can connect roof aerial, cable reception, a satellite receiver , set top boxes (DVB-T) or video recorders etc.
10 Connections and Start of Operation Connecting to the Roof Aerial Ensure that the roof aerial is properly installed and grounded. If the roof aerial is not properly grounded, voltage may damage the unit and static charges may build up. ➣ Connecting to a Device without SCART Socket Use a coaxial cable to connect the units.
English 11 Connections and Start of Operation Connecting Camcorders and Video Games Connecting to Cable Reception Connecting to Headphones 1 Plug the coaxial cable of the cable reception into the socket [ANT]. The output for the headphone is on the right rear side of the unit.
12 Connections and Start of Operation ➣ Connecting Camcorders and Video Games by S-Video Cable 1 Connect the S-Video cable to the socket [S-VIDEO] and the output sockets of the external devices. 2 Plug the audio cable into the socket [AUDIO IN] on the television set and connect the cable to the output socket of the external device.
English 13 Connections and Start of Operation Connecting to External Devices with Component Input If the television set does not receive any signal, adjust the output of the computer . For information on how to setup the computer , refer to the corresponding manual of the computer .
14 Connections and Start of Operation Connecting the Digital Audio Output Y ou can Connect optical digital audio cable to "DIGIT AL AUDIO OUT" on the rear of the TV and the other end to "DIGIT AL AUDIO IN" of the equipment with a digital output to enjoy digital sound (Multi-Channel Surround Sound, Stereo, Dolby Sound).
English 15 Connections and Start of Operation 1 Connecting HDMI/DVI Cable Connect the HDMI/DVI cable and audio cable from the output jacks on the DVD player or Set-top box to the [HDMI 1] or [HDMI 2] input jack and PC Audio input jacks on the TV .
16 Settings 1 Press the mains switch on the back of the unit. 2 Press the remote control. This switches the unit on and it can be operated using the remote control. ➣ Stand by 1 Press on the remote control. ➣ Switch Stand by Off 1 Press the mains switch on the back of the unit.
¥ Position OK: Select MENU/EXIT : Exit Mode Brightness Contrast Sharpness Colour T int Colour T emperature Standard 050 050 050 050 050 Picture Audio T imer Install Setup Option English 17 Open, Select and Close Menus T uning Y ou only need to tune the TV channels, if the device is connected to a roof aerial.
Move ¥ 0~9 Adjust MENU: Previous EXIT : Exit Auto T uning Programme Colour System Manual T uning Fine T uning Name Sound W eak Signal Boost Programme Edit Italy 12 PA L BG S23 217.
Move OK: Select MENU: Previous EXIT : Exit Auto T uning Programme Colour System Manual T uning Fine T uning Name Sound W eak Signal Boost Programme Edit Italy 12 PA L BG S23 217.
Move ¥ Pr/C/S Adjust MENU: Previous EXIT : Exit Auto T uning Programme Colour System Manual T uning Fine T uning Name Sound W eak Signal Boost Programme Edit Italy 12 PA L BG S23 217.
Auto T uning Programme Colour System Manual T uning Fine T uning Name Sound W eak Signal Boost Programme Edit Italy 12 PA L BG S23 217.25 S 23 Stereo / Dual 1 Off Picture Audio Timer Install Setup Opt.
Move MENU: Previous EXIT : Exit Auto T uning Programme Colour System Manual T uning Fine T uning Name Sound W eak Signal Boost Programme Edit Italy 12 PA L BG S23 217.25 S23 Stereo / Dual 1 ¥ Picture Audio Timer Install Setup Option Programme Edit Lock Skip Pr.
Move ¥ 0~9 Adjust OK: Clear MENU: Previous EXIT : Exit Language Geometry Aspect No WSS Favourite Channel PIP Adjustment Factory Preset English Auto Full ¥ Picture Audio Timer Install Setup Opt.
Move OK: Select MENU: Previous EXIT : Exit Language Geometry Aspect No WSS Favourite Channel PIP Adjustment Factory Preset English Auto Full ¥ Picture Audio Timer Install Setup Option Aspect Auto .
Mode Brightness Contrast Sharpness Colour T int Colour T emperature Standard 050 050 050 050 050 Picture Audio Timer Install Setup Option Mode Standard Sport Natural Mild Custom Move OK: Select MENU: .
Mode Brightness Contrast Sharpness Colour T int Colour T emperature Standard 050 050 050 050 050 Picture Audio Timer Install Setup Option Move ¥ Adjust MENU: Previous EXIT : Exit ¥ Temperature.
Balance V olume Equalizer SRS WOW Audio Selection HDMI Audio 050 019 Music Off Sub Picture Audio Timer Install Setup Option Move OK: Select MENU: Previous EXIT : Exit ¥ Standard Music Film Speech .
Balance V olume Equalizer SRS WOW Audio Selection HDMI Audio 050 019 Music Off Main HDMI Picture Audio Timer Install Setup Option Move OK: Select MENU: Previous EXIT : Exit ¥ HDMI Audio HDMI PC Ba.
Clock Update Pr . On Timer Off Timer Audio Selection - -:- - Off AM 12:00 Off Main Picture Audio Timer Install Setup Option Clock Clock AM 1 1 : 34 ¥ ¥ Move 0~9 Adjust OK: Clear MENU: Pr.
Clock Update Pr . On Timer Off Timer Audio Selection - -:- - Off AM 12:00 Off Main Picture Audio Timer Install Setup Option On Timer Move ¥ Select MENU: Previous EXIT : Exit ¥ Enable On On Time AM 1 1 : 3 4 Programme 01 Volume 020 Clock Update Pr .
Picture Audio Timer Install Setup Option Move ¥ Adjust MENU: Previous EXIT : Exit ¥ Local Lock OSD Setting No Signal Power Off No Operation Power Off Noise Reduction Te letext Character Group Off 20 180 On W est Europe Clock Update Pr .
Local Lock OSD Setting No Signal Power Off No Operation Power Off Noise Reduction T eletext Character Group Off 20 180 On W est Europe Picture Audio Timer Install Setup Option Move ¥ Adjust MENU: .
Local Lock OSD Setting No Signal Power Off No Operation Power Off Noise Reduction Te letext Character Group Off 20 180 On W est Europe Picture Audio Timer Install Setup Option Move ¥ Adjust MENU: .
Position OK: Select MENU: Previous EXIT : Exit Language Geometry Aspect No WSS Favourite Channel PIP Adjustment Factory Preset English Auto Full Picture Audio Timer Install Setup Option ! Warning Yes .
English 35 W atching When you switch the unit on, the current television program will be displayed. 1 Press ¥ or to set the desired volume. ➣ Mute 1 Press to switch the sound temporarily off. 3 Press to switch the sound on again. Press or to scroll through the channels.
Input Selection 1. TV 2. SCART1 VIDEO 3. SCART2 VIDEO 4. Video 5. S -Video 6. Component1 7. Component2 8. RGB 9. HDMI 0. HDMI2 36 W atching Recall a Favourite Channel Select Source Use this function to scroll through the channels or sources you have stored as your favourite stations.
W atch T wo Programs at the Same T ime (PIP ) Use this function to display a second picture. This way you can watch two programs you are receiving by antenna or by the other inputs at the same time. Y ou can display on large and one small picture or two pictures of the same size.
38 W atching Use this function to set the size of the small picture. 1 Press . 2 Press . 3 Press or ¥ or or and select the desired size. Y ou can also adjust this setting in the menu OPTIONS. Use this function to set where the sub screen will be displayed.
English 39 W atching Use this function to hold the picture. 1 Press . During the display of the still picture the sound will continue to play . 2 Press again to continue watching. Use this function to display the time. If teletext is displayed, the time will not be shown.
Use this function to set the sound effects. 1 Press . 2 Press again to switch the sound effect of f. For further information on the settings refer to: “Adjust Medium and Low Frequencies” on page 28. Use this function to adjust the sound optimally to the content.
English 41 Cleaning and T roubleshooting Cleaning T roubleshooting If there are problems with the unit, please check the following points before contacting the technical service. Cleaning and Troubleshooting Never open the unit. This may lead to electric shocks and will void the warranty .
42 Cleaning and T roubleshooting Some Channels Display Black and White Snow on one or Several Channels Remote Control Does Not Work Message "No Signal " Message "Video not Supported&quo.
English 43 T echnical specifications T echnical specifications General Input voltage Operating temperature Environment temperature Remote control Ty p e Battery Pixel Ty p e Frequency Colour system So.
44 Memo 1027_A50-095300_Eng 10/27/06 9:45 PM Page 44.
English 45 Memo 1027_A50-095300_Eng 10/27/06 9:45 PM Page 45.
46 Memo 1027_A50-095300_Eng 10/27/06 9:45 PM Page 46.
Ein wichtiger Punkt beim Kauf des Geräts Energy Speaker Systems LTV46DA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Energy Speaker Systems LTV46DA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Energy Speaker Systems LTV46DA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Energy Speaker Systems LTV46DA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Energy Speaker Systems LTV46DA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Energy Speaker Systems LTV46DA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Energy Speaker Systems LTV46DA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Energy Speaker Systems LTV46DA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Energy Speaker Systems LTV46DA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
