Benutzeranleitung / Produktwartung 66 des Produzenten Alamo
Zur Seite of 50
T ree Cutter Grizzly 66 ALAMO INDUSTRIAL 1502 E. W alnut Seguin, T exas 78155 830-372-3551 © 2005 Alamo Group Inc. Published 01/05 Part No. 02975193C OPERA T OR'S MANUAL This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times.
TO THE OWNER/OPERA T OR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices.
In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book.
Alamo Industrial is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V id.
T ABLE OF CONTENTS SAFETY SECTION ...................................................................................................................................... 1- 1 Safety Information ..........................................................
.
Safety Section 1-1 SAFETY SECTION.
Safety Section 1-2 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 A safe and careful operator is the best operator . Safety is of primary importance to the manufac- turer and should be to the owner/operator . Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions.
Safety Section 1-3 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad.
Safety Section 1-4 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 DANGER! Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) DANGER! Never allow children to operate or ride on the Tractor or Implement.
Safety Section 1-5 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 WARNING! Transport only at safe speeds. Serious accidents and injuries can result from operating this equipment at unsafe speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways.
Safety Section 1-6 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 DANGER! KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement and possible serious injury or death. (SG-24) DANGER! Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed.
Safety Section 1-7 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 WARNING! Many varied objects, such as wire, cable, rope, or chains, can become entangled in the operating parts of the mower head. These items could then swing outside the housing at greater velocities than the blades.
Safety Section 1-8 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 WARNING! Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Mower Head on the ground or securely supported on blocks or stands, disengage the PTO, and turn off the engine.
Safety Section 1-9 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 It is the intention of this manual to inform owners and their operators of some of the dangers inherent in the use of this epuipment. The machine is an effective, durable and simple tool and when used correctly will provide satisfactory results with minimal danger.
Safety Section 1-10 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 3. An area to be cut must first be inspected for objects that could be thrown or that could damage the machine. Walk through the area looking for overgrown fences, boulders and rocks, culverts, stumps or metal objects.
Safety Section 1-11 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Reversing the direction of rotation of the cutting head on side opening machines increases the chances of objects being thrown out because of the position of the "gate" in relation to the boom arm.
Safety Section 1-12 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 A TTENTION! This unit was shipped with an Operator’s Manual Specifically designed to remain with the unit at all times. This manual is to be stored in the protective canister shipped with this unit.
Safety Section 1-13 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Clean Surface With Alcohol Before Applying T ape. Cover Holes With T ape to Prevent Moisture From Entering Canister . ITEM P ART NO. Q T Y DESCRIPTION 1 02977385 1 Sq. Canister 2 02968143 2 1/2' T ape 3M Back to Back 3 02977417 1 Decal, Op.
Safety Section 1-14 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 ITEM PART NO. QTY LEVEL DESCRIPTION 1 00769736 1 WARNING Use/Repair Shield & Guards 2 00769737 2 DANGER Cutting Blades/Thrown O.
Safety Section 1-15 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 6 - 02972284 5 - 02967867 2 - 00769737 7 - 02965262 1 - 00769736 Decals Not Shown 10 - 02973052 - Danger Keep Clear Wires 9 - 02973.
Safety Section 1-16 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 3 - 02925100 4 - 02967827.
Safety Section 1-17 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 11 - 00725746.
Safety Section 1-18 SAFETY © 2005 Alamo Group Inc. GRIZZLY 66 01/05 This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such.
Introduction Section 2-1 INTRODUCTION SECTION.
INTRODUCTION Introduction Section 2-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 The Grizzly is a dependable machine designed specifically for removal of brush, scrub, shrubbery, small trees and other undergrowth in rural areas. This machine is not recommended for use in populated and built-up areas.
INTRODUCTION Introduction Section 2-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 MAKE EVER Y DA Y A HOLIDA Y FROM ACCIDENTS!! DANGER! A signal word - DANGER , WARNING , or CAUTION - is used with the Safety Alert symbol. DANGER identifies the most serious hazards.
.
Assembly Section 3-1 ASSEMBL Y SECTION.
ASSEMBL Y Assembly Section 3-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 PRE-INSTALLATION Prior to installing the Girzzly on the carrier, check to make sure that the combination of carrier and Grizzly is correct and is as ordered.
ASSEMBL Y Assembly Section 3-3 © 2002 Alamo Group Inc. GRIZZLY 66 01/05 Note: This is a typical schematic only, refer to the drawing supplied with the machine you purchased for the appropriate detailed schematic.
ASSEMBL Y Assembly Section 3-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 ALTERNATE HYDRAULIC SCHEMATIC.
ASSEMBL Y Assembly Section 3-5 © 2002 Alamo Group Inc. GRIZZLY 66 01/05 ALTERNATE HYDRAULIC SCHEMATIC.
.
Operation Section 4-1 OPERA TION SECTION.
OPERA TION Operation Section 4-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 IMPORTANT: Read this section carefully and follow the instructions outlined before starting up the machine. Failure to follow the procedures outlined in this manual may result in personal injury to the operator or bystanders, or in damage to the machine.
OPERA TION Operation Section 4-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Two Blade Arm w/ Blades Disc w/ Cutter Bits Three Blade Rotary Disc Start Up Clear all personnel, except the operator, from the vicinity of the machine. With the Control Valve in the "OFF" position, start up the machine.
OPERA TION Operation Section 4-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 NOTE: Preform the following run-up check over grass if possible to avoid raising dust.
Maintenance Section 5-1 MAINTENANCE SECTION.
MAINTENANCE Maintenance Section 5-2 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 General Maintenance The importance of regular maintenance and inspection as a means of prolonging the life and maintaining the efficiency of the Grizzly cannot be overemphasized.
MAINTENANCE Maintenance Section 5-3 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 - Using a large pair of snap ring pliers, remove retaining ring from the bottom of the housing. - Remove bottom cover from housing. - Wash all parts in solvent and inspect carefully for damage or excessive wear.
MAINTENANCE Maintenance Section 5-4 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Bikon Hub 1. Read and be familiar with the Bikon Lock Instructions. 2. Dismantle new Bikon Lock. Clean off preserving oil with rag. 3. Clean shaft end and bore of Bikon Lock.
MAINTENANCE Maintenance Section 5-5 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Dry Bolt 375 ft/lb w/ Red Locktite Appplied 282 ft/lb BIKON TORQUE VALUES (TABLE 1) FIGURE 1 BIKON TORQUING SEQUENCE * PROPER TORQUE FOR FASTENERS The chart lists the correct tightening torque for fasteners.
MAINTENANCE Maintenance Section 5-6 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Blade Arm 1. The taper fit between the Blade Arm and the shaft must be blued and checked. Only perfect fits are acceptable -- reject anything less. 2. Warm Blade Arm to 180-200 degrees C.
MAINTENANCE Maintenance Section 5-7 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 The frictional torque capacity of these devices is based on lightly oiled screw, taper, or shaft and bore contact areas with a coefficient of friction µ = 0.12. Therefore, it is important not to use Molybdenum Disulfide, e.
MAINTENANCE Maintenance Section 5-8 © 2005 Alamo Group Inc. GRIZZLY 66 01/05 Removal 1. Make sure axial movement of clamp collars - necessary for release of connection - is not resricted.
MAINTENANCE Maintenance Section 5-9 © 2005 Alamo Group Inc. GRIZZLY 66 01/05.
LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and wa.
TO THE OWNER/OPERA T OR/DEALER Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.
GRIZZL Y 66 01/05 Printed U.S.A. P/N 02975193C.
Ein wichtiger Punkt beim Kauf des Geräts Alamo 66 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alamo 66 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alamo 66 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alamo 66 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alamo 66 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alamo 66 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alamo 66 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alamo 66. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alamo 66 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
