Benutzeranleitung / Produktwartung MP8780 des Produzenten 3M
Zur Seite of 38
MP8780 Pr ojecteur multimédia Guide de l'opérateur MP8780 Multimedia-Pr ojektor Benutzer handbuch Pr oyector de Multimedia MP8780 Manual del Usuario MP8780 Pr oiettor e Multimediale Manuale del.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 1 MP8780 T able of Contents Safeguards ................................................................................................................. 3 W arranty ................................
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 2.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 3 Safeguards INTENDED USE Before operating the machine, please read the entire manual thoroughly . The 3M™ Multimedia Projector 8780 was designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand ceiling mount hardware and nominal local voltages.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 4 SA VE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M MP8780 Multimedia Projector . LOCA TION OF PRODUCT SAFETY LABELS Safety labels are used on or within the 8780 projector to alert you to items or areas requiring your attention.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 5 W arranty LIMITED W ARRANTY 3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase. Proof of purchase date will be required with any warranty claim.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 6 Section 1: Unpack 1.1 Contents of Shipping Box The 3M ™ MP8780 Multimedia Projector is shipped with the necessary cables required for standard VCR, PC, MAC ™ II or laptop computer connections.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 7 Section 2: Product Description 2.1 Machine Characteristics The MP8780 Multimedia Projector integrates ultra-high bright lamp and polysilicon LCD display technology into a single unit.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 8 8 9 2 7 STANDBY/ON MUTE MENU BACK LIGHT SELECT RESET VOLUME FOCUS VIDEO RGB ZOOM L R DRAG BLANK 1 13 OI 12 11 10 2 3 4 5 6 EPS-59A 2.2 Part Identification List Figur e 2.2 Identifying MP8780 Par ts 1.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 9 2.3 System Setup - Connecting V arious Equipment It only takes a few minutes to connect the 3M™ Multimadia Projector MP8780 to your computer , VCR, or other device. Always disconnect the projector power before connecting any cables.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 10 2.3 System Setup - Connecting V arious Equipment (continued) BNC Connections There are four kinds of usage for BNC connectors: Usage 1: Selecting "RGB" determines the usage of BNC as RGB Input.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 11 MUTE MENU VIDEO SELECT RGB VOLUME FOCUS MAGNIFY FREEZE ZOOM L R DRAG BLANK TIMER STANDBY/ON + – + – – – + + 2.4 Remote Control T ransmitter Identification STANDBY/ON Set main power switch to ON.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 12 Section 3: Basic Operations 3.1 Pr ojector Startup Figur e 3.1 Pr ojector Contr ols 1. Make all cable connections and line hookups with the power off. 2. Turn the POWER SWITCH of the projector on.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 13 MUTE MENU VIDEO SELECT LIGHT RGB VOLUME FOCUS MAGNIFY FREEZE ZOOM L R DRAG BLANK TIMER STANDBY/ON + – + – – – + + MENU Section 4: Adjustments and Functions 4.1 Menu Navigation 1. Press MENU button on pr ojector or remote contr ol.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 14 4.3 SETUP The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or V ideo (Figure 4.5) menu according to the input source being projected.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 15 4.4 IMAGE The IMAGE sub-menu is used to change the image characteristics. Figur e 4.6 Image Adjustment Scr eens SETUP IMAGE OPTION PIP MIRROR M.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 16 4.5 OPTION The OPT . sub-menu allows you to control communication function. Figur e 4.7 OPTION Adjustment Scr eens SETUP IMAGE OPTION RESET LAN.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 17 4.5 OPTION (continued) OPTION MENU Adjustment Screen V alue Description Default RESET DEF A UL T – Reset to factory default settings LAMP TIM.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 18 5.1 Cleaning the Air Filter ✔ Note Clean the air filter about every 50 hours, if air is restricted due to dust accumulation on filter , the projector may shut down due to overheating. 1. T urn off the MAIN POWER switch of the projector and pull out power cord.
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 19 6.1 Lamp The following symptoms may indicate a lamp in need of replacement: • LAMP indicator lights up red. • "CHANGE THE LAMP" message appears on the screen. ✔ Note This lamp contains mercury .
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 20 ✔ Note For maximum lamp life, do not apply shock, handle or scratch the lamp glass when it is hot. Also, do not use an old or previously used lamp as a r eplacement lamp. 1. Loosen cover r etaining screws: The lamp access cover is located on the side of the projector .
© 3M 1999 3M ™ Multimedia Projector MP8780 ENGLISH 21 Section 7: T roubleshooting Error Message Displays NO SIGNAL IS DETECTED. INVALID. CHANGE THE LAMP. LIFE: 50 HS CHANGE THE LAMP. NO LIFE. Cause The projector is not detecting a signal. The horizontal frequency of input signal exceeds projector capability.
3M ™ Multimedia Projector MP8780 © 3M 1999 ENGLISH 22 Section 8 : Accessories 8. 1 Service Information For product information, product assistance, service information, or to order accessories, please call: In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales o f fice.
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-1 Product name Model Name Display system Panel size Drive system Number of pixels Lens Lamp Speaker (stereo) Power supply Power consumption Op.
TECHNICAL A-2 © 3M 1999 3M ™ Multimedia Projector MP8780 A.2 Dimensions 430 mm (17.2 in.) 495 mm (19.8 in.) LAMP TEMP FAN COVER CHANGE LAMP POWER RGB1 L VIDEO1 R L R VIDEO2 SERIAL MOUSE LR U S B RGB2 RGB OUT PUT IN PUT RGB3/VIDEO3 R/Y(CV) G/U B/V LR LR LR HS VS OI + – + – + – 520 mm (20.
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-3 ✔ Note These sizes are ± 1%. This is due to variations in the manufactur e of the lens. If you are close to one of the endpoints you should verify with your unit that the image is the proper size at the pr oper distance.
TECHNICAL A-4 © 3M 1999 3M ™ Multimedia Projector MP8780 A.5 Connection to the RGB Signal T erminal Video signal Horizontal sync signal Vertical sync signal Composite sync signal Audio signal Input Output Analog 0.
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-5 c) Example of computer signal Scan Frequency Dot Clock Mode No. H-Size Resolution H (kHz) V (Hz) (MHz) Computer 1 780 320x480i 15.7 59.9 12.270 NTSC(RGB) RGB-NTSC 2 940 384x576i 15.6 50.0 14.
TECHNICAL A-6 © 3M 1999 3M ™ Multimedia Projector MP8780 A.6 Indicator Status The indicators lamps will light or flash to indicate the following operating conditions: Note 2: Some input sour ces may not be displayed properly because they ar e not compatible with the projector .
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-7 A.7 Connection to the Control Signal T erminal ADB mouse PS/2 mouse a) Mouse emulation (1) While the projector and computer are turned OFF , connect the projector and the mouse terminal of computer using an appropriate cable (PS/2, Serial or ADB).
TECHNICAL A-8 © 3M 1999 3M ™ Multimedia Projector MP8780 Serial mouse A.7 Connection to the Contr ol Signal T erminal (continued) RS-232 Control Cable (not included with basic packout) This cable is used to directly control the projector without using the Remote Control or Operator's Panel.
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-9 A.7 Connection to the Control Signal T erminal (continued) USB Mouse Cable This cable is used to connect the projector and computer to allow computer mouse control via the projector's remote control buttons.
TECHNICAL A-10 © 3M 1999 3M ™ Multimedia Projector MP8780 Command Code Formats All codes in this document are in ASCII T ext. In order to get this to work you must send at the same communication setting as the projector . This should be 9600 8N1. For the rest of this document CR is a carriage return which is code 13.
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-11 A.8 Serial Inferface Command Codes (continued) Function Code Meaning P o wer On/Off Write Codes D00W00 P ower On D00W01 P ower Off Read Cod.
TECHNICAL A-12 © 3M 1999 3M ™ Multimedia Projector MP8780 A.8 Serial Inferface Command Codes (continued) Function Code Meaning Contrast Write Codes D12W00 to D12W14 Set contrast le vel to a v alue between 00 and 14 he x. This corresponds to 20 possible settings .
© 3M 1999 3M ™ Multimedia Projector MP8780 TECHNICAL A-13 A.8 Serial Inferface Command Codes (continued) Function Code Meaning Display P osition Write Codes D36W00 to D36WFE Change vertical display position (up/down) from reset position by 00 to FE.
TECHNICAL A-14 © 3M 1999 3M ™ Multimedia Projector MP8780 A.8 Serial Inferface Command Codes (continued) Function Code Meaning IR receiv er selection Write Codes D5A W00 Selects F ront and Rear IR .
3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-9000 3M Canada P.O. Box 5757 London, Ontario N6A 4T1 3M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico 3M Europe Boulevard de l'Oise 95006 Cerge Pontoise Cedex France Litho in USA Copyright © 1999 3M IPC.
Ein wichtiger Punkt beim Kauf des Geräts 3M MP8780 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie 3M MP8780 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für 3M MP8780 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von 3M MP8780 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über 3M MP8780 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon 3M MP8780 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von 3M MP8780 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit 3M MP8780. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei 3M MP8780 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
