Benutzeranleitung / Produktwartung Speaker System des Produzenten Electro-Voice
Zur Seite of 56
Delay GEQ PEQ Level Delay PEQ HPF > X-Over Recall Store < Edit > Setup Mute Mute Mute Mute Mute Mute > Electro-Voice DC-One M Program:V01 (FullEdit (2in.
www.electrovoice.com.
equilateral triangle is intended to alert the user to the presence of uninsulated „dangerous voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents Introduction ......................................................... 8 DC -One Features ..................................................................... 8 Controls & Connection .......................................... 10 Front Panel .
R outing ...................................................................................................... 29 Cross-Over (Output Channels) ...................................................................... 29 P arametric EQ (Output Channels) .
6 > Recall Store < Edit > Setup > Electro-Voice DC-One Program:U01 (FullEdit (2in. 6out)) Select Buttons Store / Recall Setup V alue Display Input Meters USB Port Comp are / Edit Overview.
7 Owners Manual Delay GEQ PEQ Level Delay PEQ HPF X-Over Mute Mute Mute Mute Mute Mute Output Gain Reduction Meters, Out- put Channel Function Indicators and Output Level Meters Output Channel Mute Bu.
8 Introduction Thank you for purchasing the Electro-V oice DC -One Digital Signal Processor . The Electro-V oice DC -One Digital System Processor is a universal two-input, six -output digital signal p.
9 Owners Manual Matrix Router / Mix er • T wo (stereo) inputs • Summed left / right (mono) input • Six assignable outputs Outputs (each) • Cross-over (hi-pass / low -pass filters), with select.
10 Controls & Connection Front Panel 1 – USB Connector USB 1.0 port for connection to a PC running Windows XP or Vista. With a connected PC you may run the DC -One Editor Graphic User Interface Application. The DC-One can be oper ated, edited and configured for installation with an easy to use, intuitive interface.
11 Owners Manual 4/5 – Value Up/Down Buttons Depending on the current LCD screen, the V alue Up/Down Buttons performs the following function: Recall – Select forw ards/backwards through the stored preset list to select a preset to be recalled to current memory .
12 10 Store Button Pressing the Store button while in Run mode displays the Store Preset screen in the LCD displa y and the Store button lights. In this screen edited presets can be named and sav ed to a user preset location. Pressing the Store button again completes the preset save oper ation.
13 Owners Manual 17 – Output PEQ Button Pressing the PEQ button places the current preset in Edit mode and jumps to the first Output Par ametric Equalizer screen.
14 R ear Panel 24- A.C. Inlet The DC -One features a standard IEC A.C. inlet that will accept universal power cords. The DC -One power supply is auto-ranging and can accept voltages from 100 - 240V AC, 50 – 60Hz. Only A.C. cords approved for use in your country should be connected to the DC -One.
15 Owners Manual 28 – Balanced XLR Outputs Each output channel has an electronically balanced XLR connector for connection to system amplifiers. Each output channel can output different frequency ranges depending on its assignment and cross-o ver settings.
16 Installation For proper oper ation, all directions regarding installation and connection must be followed. Mounting The DC -One should be mounted in a rack -mount enclosure or rack r ails. The unit is 1RU tall by 14” (353mm) deep. Proper clear ance for air circulation around the unit must be provided.
17 Owners Manual Un-balanced Input / Output Connections Un-balanced connections can be made to the DC-One, although induced noise from cabling may be increased. Cables should also be less than 15” (5m) in length. Unbalanced connections can be 6dB lower in level as well.
18 USB Connecting the DC -One to a PC for operation via the DC -One Graphic User Interface application is accomplished via the front panel USB port. The port conforms to the USB 1.0. T ype B specification. T ype B USB cables are readily av ailable at computer dealers.
19 Owners Manual Editing & Operation F actory Presets The DC -One comes with 60 factory presets to configure and manage typical sound reinforcements systems. F actory presets can be recalled at will. Limited editing can be performed from the front-panel LCD user interface such as output level, mute and limiter threshold setting.
20 Run-time Mode LCD Display On power-up, the DC -One boots and displays the run-time screen. The current preset memory location and name are displayed as well as the configur ation on which the preset is based.
21 Owners Manual Output Gain R eduction Meters Each output channel has a four-segment gain reduction meter that shows the effect of the output channel Limiter on output level; from 0dBu to -12dBu. Output limiting can be bypassed by entering Edit mode, selecting Output Channel Limiter and selecting a limiter threshold of +21 dBu (8.
22 Make sure that the new preset is appropriate for y our system, and that connections to your system are correct for the current configuration. F ailure to do so could cause unexpected results or damage to the system or its components. T o exit the Recall process without loading a new preset, press the Edit, Setup or any of the DSP block buttons.
23 Owners Manual Edit Both F actory and User preset can be edited, but edited presets can only be stored in User preset locations. Standard Edit Mode The DC -One defaults to Standard Edit mode wherein, input and output channel par ameters are appropriately linked.
24 Input Channel Hi-Pass Filter Use the < Select > buttons to make the top line of the Edit screen activ e and the V alue Up and Down buttons to navigate to the Input Hi-P ass screen. The first DSP block in the DC -One’s signal flow is the stereo Hi-P ass Filter .
25 Owners Manual Input Channel Parametric EQ Use the < Select > buttons to make the top line of the Edit screen active and the V alue Up and Down buttons to navigate to the Input PEQ screen. The DC-One pro vides a stereo nine-band multi-mode filter generically referred to as the Input PEQ (Par ametric Equalizer).
26 Low -pass The Low-P ass filter determines the ultimate high frequency that your sound reinforcement system is allowed to reproduce; given the capabilities of amplifiers, speakers and transducers. The low-pass filter is useful for reducing excessive high frequency energy that can create stress on high frequency transducers and listener fatigue.
27 Owners Manual Hi-pass The Hi-P ass filter determines the ultimate low frequency that your sound reinforcement system is allowed to reproduce; given the capabilities of amplifiers, speakers and transducers. K eep in mind that the DC-One signal path already includes a hi-pass filter prior to the Input PEQ DSP block.
28 Input Delay DC -One offers an input delay that is useful for compensating for different arriv al times of sound originating from loudspeakers that are closer or further awa y from the listener than others.
29 Owners Manual Routing Input selections (In-A, In-B or In- A+B) can be applied to any or all of DC-One’ s six outputs. Choose a desired output channel from the output menu and press the Edit button to scroll to the Routing window using the V alue up/down arrows.
30 Frequency Frequency offers a selectable frequency range from 20.0 Hz to 20,000Hz. Hi-Pass/Lo Pass The DC -One Hi-Pass and Lo-Pass filters are determined b y selecting the Type from the list of par ameters, (see list above) and by choosing a frequency range between 20.
31 Owners Manual Output 1-6 Parametric EQ Band Type Frequency Slope Resp / Q Gain 6dB/oct. 12dB/oct. 6dB/oct. 12dB/oct. PEQ 20Hz - 20000Hz 0.40 to 20 -15.0dB to +15.0dB 6dB/oct. 12dB/oct. 0.40 to 2.00 6dB/oct. 12dB/oct. 0.40 to 2.00 ALLPS1 20Hz - 20000Hz ALLPS2 20Hz - 20000Hz 0.
32 Channel Level (Output Channels) The Channel Level is used to adjust master output levels. T o access the Channel Lev el screen, press the Level button found on the output processing menu. Subsequent button presses will toggle the display between OUT1 to OUT6.
33 Owners Manual Setup The Setup menu allows access DC -One’s global parameters on the LCD screen. This is where preferences for many functions can be set or adjusted.
34 Input This window is where the global input mode is set. <SELECT> key to navigate to the MODE par ameter . Use the up/down V ALUE arrows to choose between Analog and Digital input.
35 Owners Manual V = 331m/s + (0.6m/s/C) * T The speed of sound at room temperature is 346 meters per second. A t freezing temper atures sound travels at 331 meters per second. V is the speed of sound and T is the temper ature of the air . This formula finds the aver age speed of sound for any given temper ature (celcius).
36 System This window displays the firmw are version currently running on the DC -One. RS232 Port An RS 232 (DB-9 or ‘D-Sub’) connection is provided on the back panel to link to another DC -One to enable Master/Slave operation.
37 Owners Manual Configurations of the DC -One The DC -One offers 7 pre-defined configurations. A configur ation is a basic setting that includes the routing of inputs and outputs, the function of the outputs (Sub, Lo, Mid, Hi, Full R ange) including basic x -over filter settings, and different channel/ par ameter linking schemes.
38 Stereo 2 Way + Full Range This configur ation generally represents a 2-wa y stereo frequency crossover , where IN A serves as the left input channel and IN B as the right input channel. OUT 1 is the left Low-frequency output and OUT 2 is the left High-frequency output.
39 Owners Manual 3 Way Stereo This configuration represents a 3-w ay frequency crossover where IN A serves as the left input channel and IN B as the right input channel. OUT s 1 & 4 L/R are the Sub frequency channel, OUT 2 &5 L/R are Low and Mid-frequency channels, 3 & 6 L/R are the High-frequency channels.
40 4 Way + FR The 4- W ay configuration is a monaur al 4- wa y frequency x-ov er . Crossover channels are fed from IN A, full r ange channels are from IN B. OUT 1 is a mono Sub frequency channel, OUT 2 is a mono Low-frequency channel, OUT 3 is a mono Mid-frequency channel, and OUT 4 is the mono High- frequency .
41 Owners Manual 5 Way + FR The 5- W ay configuration is a monaur al 5- way frequency x -over . Crossover channels are fed from IN A, full range channels are fed from IN B.
42 Free Configuration - Full Edit 2 in 6 Out In this configuration, all 6 outputs are configured for full r ange operation. OUT 1, OUT 2 and OUT 3 get their signal-feed from IN A while OUT 4, OUT 5 and OUT 6 are fed from the input channel IN 2.
43 Owners Manual 3 Way Stereo-Mono Sub+FR This 3-way configur ation provides stereo crossover for Low-frequency and High- frequency devices and a summed mono feed for subs as well as a Full-range output. IN A serves at the left input and IN B serves as the right input.
44 4 Way Stereo -MonSub+LF The 4- Wa y Stereo –Mon + Sub + LF configur ation is a stereo 4-wa y frequency x -over . Mono Sub-frequency and Low- frequency channels are fed from IN A + IN B, Mid-frequency and High-Frequency left are fed from IN A, Mid-frequency and High- Frequency right are fed from IN B.
45 Owners Manual EQ Plot Images 6dB PEQ Cuts Q Changes 6dB-Oct Shelves at 200Hz and 2kHz.
46 12dB PEQ Cuts Q Changes 12dB-Oct Shelves at 200Hz and 2kHz.
47 Owners Manual Bessel Filters Butterworth Filters.
48 Hi Lo Pass Filters Linkwitz-Riley Filters.
49 Owners Manual PEQ Gains.
50 DC-One Standard Configurations Input A Input B Out 1 Link Out 2 Link Out 3 Link Out 4 Link Out 5 Link Out 6 Source/Bandpass Source/Bandpass Source/Bandpass Source/Bandpass Source/Bandpass Source/Ba.
51 Owners Manual Input A Input B Out 1 Link Out 2 Link Out 3 Link Out 4 Link Out 5 Link Out 6 Source/Bandpass Source/Bandpass Source/Bandpass Source/Bandpass Source/Bandpass Source/Bandpass 4 5-Way (+.
52 Ed i t H PF PE Q G E Q D ela y X -Over X X PEQ D e l ay Setup S tor e R eca ll L eve l M ut e M ut e M ut e M ut e M ut e M ut e < > P r o g r a m : U 0 1 F u l l H o u s e R i g h t ( 4 - W a y + F R ) 4 4 83mm 1 9 in 43.6mm 43.6 m m 1. 72 in AVIS: WARNING: CAUTION: A T TENTION: 441mm 17.
53 Owners Manual General Mains Voltage 100-240 VAC 50-60 Hz Power Consumption 25W Audio Analog Inputs 2x XLR IN, electronically balanced 2x XLR THRU OUT, electronically balanced Digital Inputs 1x XLR AES/EBU IN Nominal Input Voltage 1.23 V / +4 dBu Maximum Input Voltage (Without -6dB Analog Pad Engaged) 8.
54 Notes.
55 Owners Manual For additional warr anty repair or service information, contact the appropriate T elex service department listed below: Telex Communications Inc.
www.electrovoice.com.
Ein wichtiger Punkt beim Kauf des Geräts Electro-Voice Speaker System (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Electro-Voice Speaker System noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Electro-Voice Speaker System - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Electro-Voice Speaker System reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Electro-Voice Speaker System erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Electro-Voice Speaker System besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Electro-Voice Speaker System verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Electro-Voice Speaker System. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Electro-Voice Speaker System gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
