Benutzeranleitung / Produktwartung T57S des Produzenten Eizo
Zur Seite of 48
English.
2 CONTENTS CONTENTS PRECA UTIONS i INTRODUCTION 5 About This Manual ............................................... 5 P ackage Contents ............................................... 5 1 FEA TURES 6 Features ..........................................
3 E CONTENTS 5 O THER SETTINGS 22 - Others, Information and Language menus - Degaussing ....................................................... 22 Input Priority ...................................................... 2 3 Beep .........................
4 CONTENTS Copyright© 1999 by EIZO NANAO CORPORA TION. All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORA TION.
E 5 INTRODUCTION INTR ODUCTION About This Manual This manual explains the precautions, features, specifications, and operation of your EIZO monitor . The separately bound 'Quick Setup Guide' explains how to install your monitor , and how to implement basic adjustments with the ScreenManager utility .
6 1 FEA TURES 1 FEA TURES Features FlexScan ® for wide compatibility • 30 to 92 kHz horizontal scanning, 50 to 160 Hz vertical scanning with automatic adjustment. • The built-in microprocessor allows user -adjustable color control adjustments to control screen distortion, and memorization of user - adjusted settings.
E 7 1 FEA TURES 1) As an Energy Star Partner, EIZO NANA O CORPORA TION has determined that this product meets the Energy Star guidelines for energy efficiency .
8 1 FEA TURES Maintenance P or t • The monitor is equipped with a maintenance port on the rear panel. This is provided so that complementary products can be utilized.
E 9 2 IMAGING ADJUSTMENT - Screen menu - All of the icons shown in the ScreenManager 'Screen' menu are described below . • Allow the monitor to stabilize for at least 30 minutes before making image adjustments.
10 2 IMAGING ADJUSTMENT (Every-other-dot pattern) (Moiré) Con vergence Displayed characters and images may appear fuzzy or have tinges of red, green, or blue if the electron beams do not converge correctly . These can be adjusted by the convergence adjustment feature in the ScreenManager .
E 11 2 IMAGING ADJUSTMENT Moiré can be reduced in a variety of ways. 1) Adjust with the ScreenManager’ s moiré reduction function. Adjust so that moiré becomes almost unnoticeable. Before adjusting, set the desktop to an every-other -dot pattern (see picture, page 10) so that moiré will be visible.
12 3 COLOR ADJUSTMENT Custom mode Sets color temperature. Allows for specific adjustments to Red, Green and Blue (R/G/B). This consists of the Cutoff and Gain functions.
E 13 3 COLOR ADJUSTMENT C o l o r T e m p r a t u r e Adjusting the Standard mode • Users should allow at least 30 minutes for the monitor to stabilize before setting the color adjustments or color matching. Procedure 1) Go to the 'Color' menu.
14 3 COLOR ADJUSTMENT Adjusting the Custom mode Cutoff and Gain adjustments Monitors use red, green and blue (R, G, and B) to convey color information. They use an additive method to combine different amounts of the primary colors to produce a desired color .
E 15 3 COLOR ADJUSTMENT a) Select the 'T emperature' icon from the sub menu. b ) Select the temperature as desired by moving the arrow keys in any direction. 4) Adjust the Cutoff Cutoff The Cutoff adjustment is the most powerful adjustment. It alters the starting point (the black level) and the ending point (the white level).
16 3 COLOR ADJUSTMENT • These diagram explains how the color curves were changed for the best adjustment in steps 4 and 5. What is the relation between the color and the brightness adjustment? Brightness uniformly adjusts the amount of light output for the entire screen and its background.
E 17 4 POWER-SA VE SETUP 4 PO WER-SA VE SETUP - P owerManager menu - What is PowerManager? The PowerManager feature automatically reduces the monitor’ s power consumption during idle periods, in accordance with the PCs ScreenSaver software. There are two PowerSaving modes in the EIZO PowerManager: Mode 1 and Mode 2.
18 4 POWER-SA VE SETUP Set-up Procedure Set the monitor’ s power -save environment to match the PC’ s ScreenSaver software. • F or the PC setup , please refer to the user’ s manuals f or the PC and graphics board. There are two power -save settings for the monitor .
E 19 4 POWER-SA VE SETUP VESA DPMS System 1) First, make the appropriate settings for the PC. (See note, page 18.) 2) Then select 'VESA DPMS'. 3) Set the delay period, which is the interval that the monitor will wait after receiving a power -save signal from the PC, before entering into Mode 1 or Mode 2.
20 4 POWER-SA VE SETUP NUTEK System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select 'NUTEK'. 3) Set the delay time, which is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters Mode 1.
E 21 4 POWER-SA VE SETUP What is VESA DPMS? The acronym VESA stands for “Video Electronics Standards Association,” and DPMS stands for “Display Power Management Signaling.” DPMS is a communication standard that PCs and graphics boards use to implement power savings at the monitor side.
22 5 O THER SETTINGS 5 O THER SETTINGS - Others, Information and Language menus - All of the icons shown in the ScreenManager 'Others' menu are described below . Degaussing The monitor automatically degausses every time the power is turned ON and every time it is reactivated from the PowerManager power -saving Mode 2.
E 23 5 O THER SETTINGS Input Priority This unique feature of the ScreenManager is for those users who utilize two PCs. It allows the user to set the priority on the PC of choice. The monitor automatically detects the selected 'Input Priority' setting every time the power is turned ON (see note).
24 5 O THER SETTINGS Beep Use this feature to set the beeper ON or OFF . If the beeper is ON, the monitor will generate beep signals as shown below . If the beeper is OFF , the monitor will not beep. Short beep • ScreenManager item selected. • ScreenManager parameter adjusted to minimum or maximum limit.
E 25 5 O THER SETTINGS Information status report Use this feature to review the current ScreenManager settings. The menu contains four pages. Pressing the ENTER key selects the different pages in order . The information displayed on each page is as follows.
26 6 GETTING THE MOST FR OM Y OUR MONIT OR 6 GETTING THE MOST FR OM Y OUR MONIT OR MD-C53A (optional) Adjustment Lock The ScreenManager operation can be disabled by holding down the AUTO-SIZING button while switching on the monitor’ s power .
E 27 6 GETTING THE MOST FROM Y OUR MONITOR Selecting the active input • The front panel’ s BNC/D-Sub selection button can be used to select BNC or D-Sub as the active input. • The ScreenManager’ s “Input Priority” setting (in the 'Others' menu) can be used to set up the automatic selection of the input .
28 6 GETTING THE MOST FR OM Y OUR MONIT OR Chaining procedure 1) Attach BNC coaxial “Y” connectors to each of the BNC inputs (H, V , G, R and B) on the first monitor in the chain (call this Monitor A). Then connect the monitor to the PC, using a signal cable equipped with BNC connectors at the monitor side.
E 29 6 GETTING THE MOST FROM Y OUR MONITOR Optional i ·Sound™ speaker system The optional speaker system i ·Sound connects directly to the monitor and can be used to support multimedia applications. The speaker also has a microphone function. For details, consult EIZO dealers.
30 7 TROUBLESHOO TING 7 TR OUBLESHOO TING T roubleshooting This page presents problems that can be corrected by the user . If a problem persists even after applying the suggested remedies, contact an EIZO dealer .
E 31 7 TROUBLESHOOTING • Error messages will remain on the screen f or 30 seconds, and then disappear . An error message may not appear at all if the signal frequency is extremely high or e xtremely low . • Check that the PC is switched ON. • Check that the signal cable is properly connected to the graphics board or PC.
32 7 TROUBLESHOO TING 3) The image has a background shadow . 4) The image is flickering. • The signal cable might be damaged. Please contact the dealer .
E 33 7 TROUBLESHOOTING • Adjust the contrast and brightness using the ScreenManager’ s Screen menu. See page 9. • The CRT is not warmed up. Allow 30 minutes for the monitor to stabilize. • This problem can be caused by earth magnetism. If this condition is noticeable, please follow the procedure below .
34 7 TROUBLESHOO TING • The CRT is not warmed up. Allow 30 minutes for the monitor to stabilize. • Allow 30 minutes for the monitor to warm up. • Degauss the screen. (Use the degaussing feature in the ScreenManager’ s 'Others' menu. See page 22.
E 35 7 TROUBLESHOOTING 2) Control Pad “ENTER key” does not operate. 3) AUTO-SIZING button does not operate. 4) AUTO-SIZING button does not work properly . 5) Characters are too large. • The Adjustment Lock is probably on. T o unlock: switch off the monitor power , then hold down the AUTO-SIZING button and switch the monitor back on.
36 7 TROUBLESHOO TING • These are dampening wires. Dampening wires are used to support the CRT’ s aperture grille, and are visible as thin dark lines across the screen.
E 37 8 CLEANING 8 CLEANING W ARNING CA UTION • Keep liquids a wa y from the monitor . Spillage into the cabinet ma y result in fire, electr ic shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately .
38 9 SPECIFICA TIONS 9 SPECIFICA TIONS Electrical Specifications CRT AG Pitch 0.25 mm (Aperture Grille) CRT Size 45 cm (17 inch) class 90° deflection Aperture Grille type CRT Surface Anti-Reflective SuperErgoCoat ® Scan Frequency Horizontal: 30 kHz-92 kHz (Automatic) V ertical: 50 Hz-160 Hz (Automatic) Max.
.
124 APPENDIX Pin Assignment Pin-Belegung Affectation des Broches D-Sub mini 15 pin connector Pin No. Signal Pin No. Signal 1 Red video 9 No pi n 2 Green video 1 0 Ground 3 Blue video 1 1 (shorted) 4 Ground 12 Data 5 No p in 1 3 H. Sync 6 Red ground 1 4 V .
125 APPENDIX A Preset Timing Char t Timing-Übersichten Synchronisation des Signaux Based on the signal diagram shown below , 4 factory presets have been registered in the monitor's microprocessor . Der integrierte Mikroprozessor des Monitors unterstützt 4 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
126 APPENDIX V GA (text) n 720 dots × 400 lines mode Unit A B C D E F µ s 0.636 3.813 1.907 6.356 25.422 31.778 D o t 18 108 54 180 720 900 m s 0.381 0.064 1.111 1.556 12.712 14.268 Line 1 2 2 35 4 9 40 0 4 49 Frequencies: fd/28.322 MHz, fH/31.468 kHz, fV/70.
127 APPENDIX A n 1152 dots × 870 lines mode Unit A B C D E F µ s 0.320 1.280 1.440 3.040 11.520 14.560 D o t 32 128 144 30 4 1152 1456 m s 0.044 0.044 0.568 0.655 12.667 13.322 Line 3 3 39 45 8 70 9 15 Frequencies: fd/100 MHz, fH/68.68 kHz, fV/75.06 Hz Interlace: N o n Sync Polarity: Separate sync, TTL, Negative Video Signal Level: 0.
128 APPENDIX Dimensions Abmessungen Dimensions (mm).
Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
For Europe, etc. (220-240 V ac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor T ype-designation: T57S (Model No. MA-1792) is in compliance with: Council Directive 73/23/EEC EN60.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ZH1/618/ 10.80 (GS-VW -SG7/01.97) mit dem V ideosignal, 1280 Punkte x 1024 Zeilen, RGB analog, 0,7Vp-p und mindestens 85,0Hz Bildwiederholfrequenz, non interlaced.
Ein wichtiger Punkt beim Kauf des Geräts Eizo T57S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eizo T57S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eizo T57S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eizo T57S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eizo T57S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eizo T57S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eizo T57S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eizo T57S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eizo T57S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
