Benutzeranleitung / Produktwartung 620L des Produzenten Eizo
Zur Seite of 62
This is the manual for the following software version. * Microsoft Windows CE: 4.0 Rev. 2.3.2 or later * Microsoft Terminal Server Client: Ver. 7.2.1 or later * ICA Client: Ver.
User’ s Man ual V er sion List A handling description changes with versions of the software built in eClient. Please refer to below . NO TE • The v ersion of software b uilt in eClient can be chec ked with a [System]-[ICA] tab of [T er minal Proper ties].
SAFETY SYMBOLS This manual uses the safety symbols bel ow . They denote critical information. Please read them carefully . W ARNING Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening.
T ABLE OF CONTENTS 1. INTRODUCTION ..................................................................................... 5 1-1. General Description ...................................................................................... 5 1-2. Features .
1. INTR ODUCTION Thank you very muc h for purchasing the EIZO eClient 620L. 1-1. General Description The eClient 620L connects with a Wi ndows T e rmina l Server*, which installed Microsoft Window s NT Server 4.0 T erminal Server Edition or Window s 2000 Server/Advanced Server/Datacenter Server , and this product is used as a terminal using them.
1-3. P ac kage Contents Please make sure that all the items listed are in the pac kage. Plea se contact your loca l dealer for assistance if any of the listed items are missing or damaged.
1-4. Controls & Connector s Fr ont (1) (1) (2) (3)(4) (1) Speak ers (2) V o lume Control (3) P ower Indicator Color 620L status Green • Operation • Screen sa ver mode Y ellow P ower sav e mode.
Rear (11) (13) (6) (7) (8) (9) (10) (5) (12) (5) P ower Connector (6) Ether net Con nector (10 Base-T , 100 Base-TX) (7) Headphone Connector (8) Microphone Connector (9) Serial P or t (RS-232C) (10) U.
2. CONNECTING THE eClient 620L This chapter explains how to connect the eClient 620L to a WTS. 2-1. Setting up the eClient 620L NO TE • Before connecting the product, set up the monitor after unfolding the base of the stand. WA R N I N G Place the eClient 620L on a strong, stable surface.
2-2. Connecting the eClient 620L NO TE Bef ore connecting the eClient 620L, confirm the follo wing: - The eClien t 620 L is tur ned off . - The WTS is tur ned on. • Connect the peripherals to the appropriate connectors of the unit. 1. In case of connecting the WTS through LAN: Connect the eClient 620L to the ne twork with an Ethernet cable.
3. SETTING U P the eClient 620L This chapter presents how to prep are for a connection with a WTS when the eClient 620L starts up for the first time. 1. T urn on the eClient 620L. The power indicator turns green and a picture appears on the screen. NO TE • When no picture is displa yed, or when the message (No ke yboard connected.
3. End User License Agreement page is displayed. Read the content and c lick [Accept] to continue. 12 3. SETTING UP the eClient 620L.
4. Set up the network environment. [Terminal Name] ................ Ty pe the name to identify this unit on the network. Click [Network Properties] and set up connectio n information according to the connection method to WTS/W eb server .
In case of connecting the WTS/W eb through LAN: (1) Double-click [Built-in LAN] icon [IP Address] ........................ Type the IP address of the unit. [Name Servers] .................... Type the IP addr ess of each server when DNS or WINS is used.
In case of a dial-up connection: (1) Double-click [Make New Connection] icon. (2) T ype a name for the connection and select the connection type (Di al-Up Connection). (3) Select a model, set up the TCP/IP settings and Security settin gs. (4) T ype the phone number for the connection.
5. Set up the desktop area. [Desktop Area and Refresh Frequency] ................................... Set the resolution/refresh rate. (The 620L supports 1024 x 768 @60 Hz only). If using this product with portrait orientation, select the [Portrait di splay] check box.
6. Set up the browser connection. Set up if you are setting up a web browse r connection. (1) Select [Internet Options] icon and click [Open]. [General] ............................. Set up the browser. [Connection] ....................... Set up the conn ection method to the browser.
8. Setup the Local sender’ s setting Setup if you are connecting to WTS/W eb server by dial-up connection. (1) Select [Dialing] icon and click [Open] icon. [Location name] .................. C hoose the sende r’s location (click [New] to add a new sender’s location).
4. A DDING & CHANGING A CONNECTION NAME This chapter shows how to add, delete, and modi fy connection names to a WTS. All the settings are managed in th e “T erminal Connection M anager”. 4-1. Adding a Connection Name These are settings for the server connection.
In Use of RDP Pr otocol 1. Display [T erminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. 2. Protocol selection dial og box is displayed. Select the “Microsoft Remo te Desktop Client” (RDP).
In Use of the IC A pr otoc ol 1. Display [T erminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. 2. “New Connection” dialog box is displayed on the screen. Select the “Citrix ICA Client” (ICA).
Clicking [Finish] to return to the “T er minal C onnection Manager” d i alog box, the registered connection name is di splayed in the [Connec tion Name].
5. LOGON & LOGOFF This chapter shows how to log on to an d log off from a WTS. 5-1. Logon to a WTS / Logoff from a WTS Logon to a WTS 1. Follow the direction from (1) to (3), depending on the environment of the eClient 620L. (1) T o connect and log on to a WTS throu gh local network: Go to step 2.
Multi Session Y ou can log on to the WTS with the sever al connection names, and switch the acti ve sessions. 1. Logon with a Connection Name, as following the previous steps. 2. Press [Ctrl] + [Alt] + [E nd] keys after logon. 3. “T erminal Connection Manager” is displayed.
Logoff fr om the WTS If y our eClient 620L star ts its operation with a desktop 1. Logoff from the WTS. (1) Close a ll applications. (2) Select [Start ] on the taskbar . (3) Microsoft W indows NT Server 4.0 T erminal Server Ed ition: Select [Logoff]. Microsoft W indows 2000 Server / Advan ced Server / Datacenter Server: Select [Shut Down.
If y our eClient 620L star ts its operation with an application 1. Log off from the WTS. Close applications to log off from the WTS. “T erminal Connection Manager” is displayed. If a dial-up connection is running, click the active button of the win dow on the right bottom of the screen.
5-2. Opening/Closing a Local W eb Bro w ser Opening a Local Web Br owser 1. Please follow the directions relev ant on the environment of the eClient 620L.
Closing a Local W eb Br owser 1. Close the local web browser . Select [Close] under the [File] on the menu bar and close the local we b browser . Return to the “T erminal Connection Manager” dialog box. If a dial-up connection is being made, clic k the active button of the window on the right of the screen.
6. USING THE TERMINAL PR OPER TIES This chapter presents how to mo dify all settings of the eClient 620L using the “T erminal Properties”. T o display the “T erminal Properties” during logging on, press F2 in the “T erminal Connection Manager” di alog box.
Settings and adjustments of “T erminal Pr oper ties” T ab name Contents Remarks Refer to Product information, T erminal Nam e Displa y the Product information General Reset Reset the term inal to fa ctor y-def ault settings p .
6-1. General Pr oduct Information [General] tab shows the p roduct name, Product ID, W indows CE Revision, version, and T erminal name. Resetting to Default (1) Select the [Reset the terminal to fa ctory-default property settings] check box. (2) The “System Settings Change” di al og box is displayed, click [Y es].
6-2. Local Resources (RD P pr otocol only) Sound settings [Remote computer soun d] ... Sound settings after WTS connec tion (Remote computer means WTS). Device settings [Local devices] .................... Select the applic able device check box when using the device connected from the WTS after W TS connection.
6-3. Display Resolutions / Desktop Colors [Desktop Area and Refresh Frequency] ................................... Set the resolution/refr esh rate. (The 620L supports 1024 x 768 @60 Hz only). If using this product with portrait orientation, select the [Portrait di splay] check box.
P ower sa ve [Screen Saver]...................... S et the screen saver and power save settings. Select the check box, and set an idle period into the [Wait] box. NO TE • P ower sa ving system After the Screen Sa ver idle pe r iod p assed, eClient shift to the power sa ve mode.
6-4. Experience (RDP protocol onl y) WTS connection [Performance] ..................... Specify your c onnection speed to WTS connection. Choose your connection speed from the pull-down menu or select the setting check box. NO TE • This setting can be a vaila ble only whe n connecting with WTS, which v ersion is 5.
6-5. Control P anel Dialing [Location name] .................. C hoose the sende r’s location (click [New] to add a new sender’s location). [Local Settings are:].
Ke yboar d [Input Locale] ..................... Selects a keyboard la nguage. [NumLock Key] .................. Enables/cancel s NumLock function on start-up. [Check Input Devices] ......... Enables/cancel s checking the connection state of a keyboard and a mouse on start-up.
Mouse [Buttons] ............................. Assigns the primar y mouse button and the secondary mouse button. [Motion] ............................. Adjusts th e speed a t which the pointer moves on your screen and how fast the mo use pointer accelerates as you move the mouse.
Date / Time NO TE • Date and time will return to the default settings if the po wer cord is unplugged. [Date/Time] ........................ Set date, cu rrent time, or time zone. [NTP Server] ....................... Synchronize time with the NTP Server.
Cer tificates Lists the certificates stored in the 620L. A certificate can be registered, if an external disk is connected to this pro duct, a certificate file can be imported. NO TE • When using the Secure Gate wa y , select its cer tificate and click [Add].
Add-on Add-on lists all application so ftware installed in eClient. T o remove software, select it and click [Remove]. NO TE • Neither Microsoft T erminal Ser v er Client nor Citrix IC A Client Software is remov ed. Internet Options [General] ......
Printers NO TE • The eClient 620L suppor ts an LPTx p or t and a COM1 por t. • Use a RDP protocol to set the printer’ s adjustment. • If you are using the IC A protocol, please ref er to the instr uction ma nual of the Citr ix MetaF rame. Adding another printer settings Select [Add Printer] icon, and click [Open].
Deleting a printer settings Select the printer icon, and click [Delete]. Modifying the settings Select the printer icon, and click [Properties]. [Printer Proper ties] dialog box is displayed, change the settings as needed.
6-6. ICA Settings (ICA Pr otocol only) NO TE • The settings will aff ect all the settings with ICA protocol. IC A Client inf ormation [ICA Client Software] ......... Versi on of the Citrix ICA Client IC A Client Configurations [ICA Client Configurations] .
6-7. Ser ver FTP Service NO TE • Bef ore setting the FTP service, specify the [P assw ord] in the [Control P anel] tab surely . [FTP Service] .......
6-8. Security Security Settings [Terminal Security Enable] ................................... This enables setting s on network information of the WTS invisible to prevent from unde sirable change.
[Single Button Connect Enable] ................................... (Select the [Terminal Security Enable] check box to enable this check box.) The procedure to connect to the WTS c an be restricted. When this check box is selected, the “Single Button Connect” dialog box is displayed when th e eClient starts up.
6-9. System Pr oduct Information [Software] ........................... Microsoft Wi ndows CE Version, Revision Window Terminal Server Client Revisio n (Please refer to the page 49 on [Updat e...].) [Hardware] ......................... Seria l Number of the unit [Network] .
7. SOFTW ARE UPD A TING/INST A LLA TION Y ou can update the built-in/add-on softwa re and install new add-on software. Updating/Installation is performed in the “T erminal Properties”.
2. “Software Update” dial og box is displayed. [Server:] ............................. Type IP address or full domain name of the FTP Server. [User Name:]/[Password:] ... Type the user name and password to connect the FTP. [File Name:] ...........
3. Preventing from update failure, ch eck if the settings are correct and the network environment is suitab le. Click [Network T est]. If the settings are correct, the fo llowing message is displayed.
Using the 620L as a FT P server The firmware file can be updated by the 620L se t as a FTP server when two or more 620L exists on the same network NO TE • This updating is a vaila ble f or OS file (NK.bin) only . FTP Server Update Update 620L 620L (FT P Ser v er) 1.
8. PRA CTICAL SETUP 8-1. 620L settings By utilizing the DHCP Option function of the DHCP Server , necessary information are supplied by the DHCP Server , and each setting is automatically set every time the 620L is turned on. The following information can be obtained by the eClient 620L.
NO TE • Making a Registry File to Connect to a WTS/W eb Ser v er . • Please ref er to the e xample below , make a registry file, and sa ve it in Unicode f or mat. Please change the italic bold phrases as n ecessar y . - ConnectionName: T ype the connection name in the “T er minal Connection Manager”.
(W eb Connection) [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWBT] "SetupWizardEnabled"=dword:0 ...................... Specifies whether starting up “eClient Setup Wizard” or not.
8-2. Shor t cut command b y keyboar d Function Short cut command Brightness Increase [A lt] ke y and [+] k ey Decrease [Alt] ke y and [-] k ey Displa y “T e r minal Co nnection Manager” dialog bo .
9. TR OUBLESHOO TING This page presents problem that can be correct ed by the user . If a problem persists even after applying the suggested reme dies, contact an EIZO dealer . Prob lems P oints to check with pos sible solutions 1. No picture is displayed on the screen.
10. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ve r use thinner , benz ene, alcohol (ethanol, metha nol, or isopropyl al cohol), abrasiv e cleaners , or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
1 1. SPECIFICA TIONS CPU National Semiconductor SC22 00, 266 MHz Memor y RAM: 64 MB, R OM: 32 MB LAN IEEE 802.3 (10BASE-T/100BASE-TX) W ake On LAN suppor ted Processing Unit Speakers Output Lev el: 1 .
Cer tifications and Standards 100-120 V A C range TÜV/NR TL, c-TÜV , FCC class A, CB, TÜV Rheinla nd Ergonomics Approv ed, EP A ENERGY ST AR ® program, TCO’99 *2 200-240 V AC range CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomic Approv ed, EP A ENERGY ST AR ® program, TCO’99 *2 *1 Monaural microphone connector is not availab le now .
12. REFERENCE 12-1. Attach ing an Arm Stand The eClient 620L can be used with an ar m stand by removing the tilt stand and attaching the arm stand to the terminal.
INDEX A ADDING & CHANGING A CONNECTION NAME ...................... 19 Add-on .................................................... 41 Administration Console ........................... 47 Attaching an Arm Stand .......................... 61 Automatic Logon .
Ein wichtiger Punkt beim Kauf des Geräts Eizo 620L (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eizo 620L noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eizo 620L - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eizo 620L reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eizo 620L erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eizo 620L besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eizo 620L verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eizo 620L. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eizo 620L gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
