Benutzeranleitung / Produktwartung LC-W5 des Produzenten Eiki
Zur Seite of 84
MUL TIMEDIA PROJECT OR MODEL LC-W5 O WNER ’S MANU AL ✽ Projection lens is optional..
2 This Multimedia Projector is designed with most advanced technology for portabilit y , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palet te of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology .
3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design ................ 2 T able of Contents .................. 3 T o The Owner .
4 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGERO US VO L T AGE C O N S T I T UT I N G A RI S K O F E L EC TR IC SHOCK IS PRESENT WITHIN THIS UNIT .
5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners.
6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the following precautions should be taken.
7 Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, do wnward, or inclined position in perpendicular direction to the horizontal plane.
8 Mo ving the Project or CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or any other transport ser vice in an unsuit able transport case.
9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an AST A approved BS 1362 fuse must be used of the same rating , marked thus A S A .
10 u e r t F ront o q w y i Bac k q Lens Mount Co ver w Pr ojection Lens (Option) e Indicators r Infr ar ed Remote Receiver (F ront) !2 CA UTION Hot air is exhausted from the e xhaust vent.
11 T er minals and Connectors r R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (supplied). e USB CONNECT OR (Ser ies B) USB connector is to used to service the projector .
12 i FOCUS but ton A djust the focus. (p.27) w ZOOM but ton Zoom in and out the images. (p.27) q ON/ST AND-B Y butt on T urn the projector on or of f . (pp.23,24) o INPUT but ton Select an input source INPU T 1, INPU T 2, Input 3 or Input 4. (pp.
13 Indicat ors q w e r t y u e W ARNING TEMP . indicator T his indicator flashes red when internal projector temperature is too high. (pp.65, 72-7 4) u LAMP 1 REPLACE indicat or T urn orange when the lif e of the projection lamp1 draws to an end. (pp.
Remot e Control P art Names and F unctions q t e !0 i !4 r !5 !3 !1 w y u o !7 !2 !8 !6 !9 @0 e LIGHT but ton Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU . (pp.25-26) t POINT ed 7 8 but tons – Select an item or adjust the value in The ON-SCREEN MENU .
Remot e Control Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size batter ies F or correct polarit y (+ and –), be sure bat ter y terminals are in contact with pins in the compartment.
16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when several projectors or video equipment next to eac h other are operated at the same time.
17 Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Before installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, cont act sales dealer where you purc hased the projector .
18 Pictur e Level and Pitc h Adjustment Installation AD JUST ABLE FEET REAR AD JUST ABLE FEET . (Ref er to p.1 0). Lens Shif t Adjustment The projection angle is adjustable up to 2.8 degrees upward and do wnw ard respectively by rotating front and bac k f eet .
19 T er minals of Project or The projector has two replaceable Interf ace board slots. The projector's functions can be e xtended by installing the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are provided in y our purc hasing the projector .
20 Installation Connecting t o Computer V GA Cable Monitor Output Desktop type Laptop type T erminals of the project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p l u g th e p ow e r co rd s o f b o t h th e projector and external equipment from the A C outlet before connecting cables.
21 Installation Connecting t o V ideo Equipment Video Source (e xample) Video Casset te Recorder Video Disc Pla yer RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as DVD pla yer or high-definition TV source.
22 NOTE ON THE PO WER COR D A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C power cord must be used. If the supplied A C pow er cord does not match y our A C outlet, cont act your sales dealer .
23 T ur ning On the Project or Connect the projector’ s A C pow er cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control.
24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f .
25 Side Contr ol SELECT butt on Ho w to Oper ate the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual.
26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image lev el among St andard, Real, and Image 1–1 0(p. 38). Display the input source inf ormation(p.
27 Oper ating with Project or Control Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo ved up or do wn to 88 percent, or sidew ay s up to 1 3 percent from the central axis of the lens shif t.
28 Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to display the information windo w on the screen.
29 Oper ating with Remote Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen.
30 KEY ST ONE butt on Reduce the upper width with P oint e but ton. Reduce the low er width with P oint d but ton. Reduce the lef t part with P oint 7 but ton. Reduce the right part with P oint 8 but ton. • The white arrows indicate that there is no correction.
31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but ton on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPU T 4 as you press the INPU T but ton.
32 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton.
33 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video.
34 Comput er Syst em Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXGA+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 75-7 6).
35 A uto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon.
36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted.
37 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Mov e the red arrow pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select Reset and press the SELECT but ton.
38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
39 Scr een Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu.
40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT button to e xpand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size.
41 Comput er Input A V S YS TEM MENU (VIDEO OR S-VIDEO) A V S YS TEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon.
42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton.
43 Scr een Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton.
44 Ke ystone This function is used to store or reset the k eystone cor rection when the Main On/Of f Switc h is pressed to Off or the A C pow er cord is unplugged.
45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x.
46 A uto pictur e control Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f .... Auto pict ure control OFF position. L1 ..... Auto pict ure control LEVEL 1 position. L2 ..... Auto pict ure control LEVEL 2 position.
47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31).
48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ort uguese, Dutc h, Sw edish, Russian, Chinese, Korean, or J apanese.
49 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Bef ore capturing an image, select “St andard” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to W-XG A (1 366 x 800).
50 Change the Log o PIN code lock setting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 buttons to switc h On/Off , This function pre vents an unauthorized person from c hanging the screen logo. Of f .
51 Lamp control Choose the running speed of cooling f ans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control This function allo ws you to c hange the brightness of the screen. Auto .....
52 P ower manag ement Time lef t before the lamp is of f Press the SELECT but ton at P ower management and the dialog box appears. Use the P oint 7 8 but tons to choose one of the three options.
53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y lock and this box appears. Choose one of the alternatives with the P oint ed buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons.
54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 80, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED.
55 Set ting Shutt er Shut ter function is av ailable to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shut ter operation from the remote control.
56 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F actory def ault Quit Exit the Set ting Menu.
57 Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and ma y result in internal heat buildup and adversely af f ect the lif e of the projector .
58 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position and close the filter cov er .
59 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton.
60 Lamp Manag ement This P rojector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLA CE indicators.
61 Maint enance and Care Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Cov er . Slide and open the Lamp Cov er until it makes a clic king sound. (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle.
62 Maint enance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing information to the dealer . ● Model No. of your pr ojector : LC-W5 ● Replacement Lamp T ype No.
63 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use.
64 T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens.
65 The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP .
66 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Mak e sure you hav e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection.
67 appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 55) appears on the scr een – The filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 57 -58) The image is out of f ocus.
68 W ARNING: High voltag es ar e used to oper ate this pr ojector . Do not at tempt to open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center .
69 Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq.
70 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Displ.
71 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu/Quit Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided.
72 Indicat ors and Project or Condition Chec k the indicators for the projector condition. The pr ojector is operating nor mally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx.
73 Appendix The pr ojector is detecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elev ated close to the abnormally high lev el.
74 Appendix The pr ojector is detecting abnor mal condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting, a Filter replacement icon (Fig .
75 Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment can be limited when these modes are selected. Appendix ✽ “T rue ” cannot be selected when UXG A2, UXGA3, UXGA4 and UXG A5 are selected (p.
76 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly view ed. • Specifications are subject to c hange without notice.
77 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 20.87” x 1 0.53” x 29.8” (530 mm x 267 .5 mm x 757 mm) (Not including projections) Net Weight 60.85lbs (27 .6 kg) F eet Adjustment 0˚ to 2.
78 Optional P arts Model No. Optional Interface Board (DVI) : AH-72003 Optional Interface Board (5-BNC) : AH-720 1 5 Optional Interface Board (D-sub 15) : AH-72031 Optional Interface Board (Dual-SDI) : AH-721 62 Optional Interface Board (Network board) : AH-721 42 The parts listed belo w are optionally av ailable.
79 Configur ations of T er minals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert.
80 W rite down the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , contact the ser vice station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid.
81 Dimensions Unit: inc h (mm) Appendix 5.81(147.5) 20.87(530) 20.65(524.5) 108 ° 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.
82 Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC.
83 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below .
U .S.A. EIKI International, Inc. 30251 Esperanza Ranc ho Sant a Margarit a CA 92688-21 32 U .S.A. T el : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457 -7878 E-Mail : usa@eiki.
Ein wichtiger Punkt beim Kauf des Geräts Eiki LC-W5 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eiki LC-W5 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eiki LC-W5 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eiki LC-W5 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eiki LC-W5 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eiki LC-W5 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eiki LC-W5 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eiki LC-W5. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eiki LC-W5 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
