Benutzeranleitung / Produktwartung X58B-A des Produzenten ECS
Zur Seite of 68
.
.
Preface Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author .
ii Preface Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • T.
iii Chapter 2 7 7 7 7 7 Installing the Motherboard 7 Safety Precautions............................................................................7 Choosing a Computer Case.............................................................7 Installing the Motherboard in a Case.
iv PC Health Status...................................................................35 M.I.B (MB Intelligent BIOS).................................................37 Load Default Settings............................................................40 Supervisor Passwor d.
1 Introducing the Motherboard Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the X58B-A motherboard. This motherboard is a high performance, enhanced function motherboard designed to support the LGA1366 socket Intel ® Core TM i7 processor for high-end business or personal desktop markets.
2 Introducing the Motherboard Feature • Accommodates Intel ® Core TM i7 processor • Intel ® QuickPath Interconnect (Intel ® QPI) of 4.8 GT/s to 6.
3 Introducing the Motherboard The motherboard comes with the following expansion options: • T wo PCI Express x16 slots for Graphic Interface • One PCI Express x4 slot • T wo PCI Express x1 slots • One 32-bit PCI v2.
4 Introducing the Motherboard • Intel X58 & ICH10R • North Bridge: Intel X58 • South Bridge: Intel ICH10R • LGA1366 socket for latest Intel ® Core TM i7 processor • Intel ® QuickPath Interconnect (Intel ® QPI) of 4.
5 Introducing the Motherboard Motherboard Components T able of Motherboard Components This concludes Chapter 1. The next chapter explains how to install the motherboard. LABE L COMP ONENT S 1. C PU S ocket LG A136 6 socke t f or I ntel ® Core TM i7 p rocessor 2.
6 Introducing the Motherboard Memo.
7 Installing the Motherboard Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a ground.
8 Installing the Motherboard Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.
9 Installing the Motherboard Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper T ype Description Setting (default) CLR_CMOS 3-pin Clear CMOS 1-2: NORMAL 2-3: CLEAR CMOS Before clearing the CMOS, make sure to turn off the system.
10 Installing the Motherboard Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sur e that you DO NOT scratch the motherboar d or any of the surface-mount r esis- tors with the clip of the cooling fan.
11 Installing the Motherboard A. Opening of the Load Plate · Put your thumb on the tail of the load plate and press the tail down. · Rotate the load plate to fully open position. B. Disengaging of the Load Lever · Hold the hook of lever and pull it to the left side to clear retention tab.
12 Installing the Motherboard Installing Memory Modules This motherboard accommodates four memory modules. It can support six 240-pin DDR3 1333/1066/800. The total memory capacity is 24 GB. Y ou must install at least one module in any of the six slots.
13 Installing the Motherboard Do not remove any memory module fr om its antistatic packaging until you are ready to install it on the motherboard. Handle the modules only by their edges. Do not touch the components or metal parts. Always wear a grounding strap when you handle the modules.
14 Installing the Motherboard T able A: DDR3 (memory module) QVL (Qualified V endor List) The following DDR3 1333/1066/800 memory modules have been tested and qualified for use with this motherboard.
15 Installing the Motherboard Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’ s features and capabilities.
16 Installing the Motherboard Follow these instructions to install an add-on card: 1 Remove a blanking plate from the system case corresponding to the slot you are going to use. 2 Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot.
17 Installing the Motherboard Connecting Optional Devices Refer to the following for information on connecting the motherboard’ s optional devices: SA T A1~6: Serial A T A connectors These connectors are use to support the Serial A T A devices for the highest data transfer rates (3.
18 Installing the Motherboard F_USB1~3: Front Panel USB headers The motherboard has six USB ports installed on the rear edge I/O port array . Addi- tionally , some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.
19 Installing the Motherboard COM: Onboard serial port header Connect a serial port extension bracket to this header to add a second serial port to your system.
20 Installing the Motherboard Installing a Hard Disk Drive/CD-ROM/SA T A Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD- ROM drive. SA T A cable (optional) SA T A power cable (optional) About SA T A Connectors Y our motherboard features six SA T A connectors supporting a total of six drives.
21 Installing the Motherboard Connecting I/O Devices The backplane of the motherboard has the following I/O ports: Use the upper PS/2 port to connect a PS/2 pointing device. Use the lower PS/2 port to connect a PS/2 keyboard. Use the USB ports to connect USB devices.
22 Installing the Motherboard Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 Connect the CPU cooling fan cable to CPU_F AN . 2 Connect the system cooling fan connector to SYS_F AN .
23 Installing the Motherboard Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V . A TX_ POWER: A TX 24-pin Power Connector CPU_F AN/SYS_F AN: F A.
24 Installing the Motherboard Hard Drive Activity LED Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data is being read from or written to the hard drive. For the LED to function properly , an IDE drive should be connected to the onboard IDE interface.
25 Using BIOS Chapter 3 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc.” BIOS with support for Windows Plug and Play . The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS.
26 Using BIOS Press the delete key to access the BIOS Setup Utility . CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc. f f f f v02.
27 Using BIOS For the purpose of better pr oduct maintenance, we reserve the right to change the BIOS items pr esented in the manual. The BIOS setup screens shown in this chapter are for r efer ence only . Please visit our website for updated manual. S tandard CMOS Setup This option displays basic information about your system.
28 Using BIOS Type (Auto) Use this item to configure the type of the IDE device that you specify . If the feature is enabled, it will enhance hard disk performance by reading or writing more data during each transfer .
29 Using BIOS IDE BusMaster (Enabled) This item enables or disables the DMA under DOS mode. W e recommend you to leave this item at the default value. Press <Esc> to return to the main menu setting page. Advanced Setup This page sets up more advanced information about your system.
30 Using BIOS Intel EIST (Enabled) This item allows users to enable or disable the EIST (Enhanced Intel SpeedS tep technology). Intel (R) T urboMode tech (Enabled) This item enables or disables Intel T urboMode T echnology support. T urbo Ratio Limit Program (Enabled) This item enables or disables Turbo Ratio Limit Program.
31 Using BIOS APIC Mode (Enabled) This item allows you to enable or disable the APIC (Advanced Programmable Interrupt Controller) mode. APIC provides symmetric multi-processing (SMP) for systems, allowing support for up to 60 processors. 1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/Removable Dev .
32 Using BIOS Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. SA T A Configuration (Enhanced) Use this item to show the Serial A T A Configuration options: Disabled, Compatible, Enhanced. OnBoard SA T A Mode (IDE) Use this item to select the mode of the Serial A T A .
33 Using BIOS Press <Esc> to return to the main menu setting page. ACPI Suspend T ype (S3) Use this item to define how your system suspends. In the default, S3, the suspend mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh current to the system memory .
34 Using BIOS Press <Esc> to return to the main menu setting page. Resume on RTC Alarm (Disabled) The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’ s R TC (realtime clock).
35 Using BIOS CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Sm a rt F an F un ct i on Help Item SMART Fan Control Enabled Smart Fan Function f Scroll to this item and press &.
36 Using BIOS Press <Esc> to return to the PC Health Status page. SMART Fan start Offset (-) (32) This item is used to set the start offset of the smart fan. CPU/System DeltaT (+3) This item specifies the range that controls CPU/System temperature and keeps it from going so high or so low when smart fan works.
37 Using BIOS M.I.B (MB Intelligent BIOS) This page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have in- stalled in your system. CMOS Setup Utility - Copyright (C) 1985-2005 American Megatrends, Inc.
38 Using BIOS Press <Esc> to return to the main menu setting page. CPU Current V oltage (1.21250V) This item allows users to adjust the CPU current voltage. CPU V olt age (Disabled) This item allows users to adjust the CPU voltage. NB Vcore (1.120 V) This item shows the Northbridge Vcore.
39 Using BIOS * When users disable the item Configur e DRAM T iming by SPD, the following picture will show . Users can adjust the values accor ding to those labelled on the DIMM specification to improve the efficiency of the system.
40 Using BIOS Load Default Settings This option opens a dialog box that lets you install stability-oriented defaults for all appropriate items in the Setup Utility . Select [OK] and then press <Enter> to install the defaults. Select [Cancel] and then press <Enter> to not install the defaults.
41 Using BIOS Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility . When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main menu.
42 Using BIOS Updating the BIOS Y ou can download and install updated BIOS for this motherboard from the manufacturer ’ s W eb site. New BIOS provides support for new peripherals, improve- ments in performance, or fixes for known bugs.
43 Using the Motherboard Software Chapter 4 Using the Motherboard Software Auto-installing under Windows XP/V ista The support software CD-ROM disc loads automatically under W indows XP/V ista. When you insert the CD-ROM disc in the CD-ROM drive, the autorun feature will automatically bring up the install screen.
44 Using the Motherboard Software Application T ab Lists the software utilities that are available on the CD. Read Me T ab Displays the path for all software and drivers available on the CD. Running Setup Follow these instructions to install device drivers and software for the motherboard: 1.
45 Using the Motherboard Software 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recom- mended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5.
46 Using the Motherboard Software Method 1. Run Reboot Setup Windows V ista will block startup programs by default when installing drivers after the system restart. Y ou must select taskbar icon Run Blocked Program and run Reboot Setup to install the next driver, until you finish all drivers installation.
47 Using the Motherboard Software 2. Select Classic View . 3. Set User Account . 4. Select Turn User Account Control on or off and press Continue ..
48 Using the Motherboard Software Manual Installation Insert the CD in the CD-ROM drive and locate the P A TH.DOC file in the root directory . This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.
49 A TI CrossFire TM T echnology Support Chapter 5 A TI CrossFire TM T echnology Support This motherboard supports the A TI CrossFire TM T echnology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
50 A TI CrossFire TM T echnology Support 4. Connect an auxiliary power source from the power supply to the graphics cards. T able A: Supported PCI Express VGA Card List for CrossFire TM Func- tion Ve .
51 A TI CrossFire TM T echnology Support The Catalyst TM Control Center Dialog Box V iew The Catalyst TM Control Center provides two views; one is Standard view for begin- ners, the other is Advance view for advanced users to access and configure the complete features of the software.
52 A TI CrossFire TM T echnology Support Memo.
53 Intel ® Matrix Storage Manager RAID Configurations The Intel ® Matrix Storage Manager allows you to configure RAID 0, and 1 sets on the external Serial A T A hard disk drives. Complete the following steps before you create a RAID set: 1 . Install the external Serial A T A hard disk drive (HDD) on your system.
54 Intel ® Matrix Storage Manager RAID Configurations 2 . The main Intel ® Matrix Storage Manager RAID BIOS menu appears. Entering Intel ® Matrix S torage Manager RAID BIOS util- ity 1 . During POST , press <Ctrl-I> to enter the Intel ® Matrix Storage Manager RAID BIOS menu.
55 Intel ® Matrix Storage Manager RAID Configurations 2 . When the RAID Level item is highlighted, use the up/down arrow key to select the RAID set that you want to create. Creating a RAID set 1 . In the main Intel ® Matrix Storage Manager RAID BIOS menu, highlight Cr eate RAID V olume using the up/down arrow key then press <Enter>.
56 Intel ® Matrix Storage Manager RAID Configurations Pressing <Y> deletes all the data in the HDDs. 5 . The following screen appears, displaying the relevant information about the RAID set you created. Users please be noted that RAID 0 (Stripe) is set to accelerate the data access, and RAID 1 (Mirror) is set to provide the data backup.
57 Intel ® Matrix Storage Manager RAID Configurations Deleting a RAID set 1 . In the main Intel ® Matrix Storage Manager RAID BIOS menu, highlight Delete RAID Volume using the up/down arrow key then press <Enter>. 2 . Use the space bar to select the RAID set you want to delete.
58 Intel ® Matrix Storage Manager RAID Configurations Resetting disks to Non-RAID An HDD that has been previously configured as part of another RAID set in another platform is called a broken RAID HDD. When you install a broken RAID HDD, you cannot select this disk when configuring a RAID set through the Intel ® Matrix Storage Manager option.
Bootblock Initialization Code Checkpoints The Bootblock initialization code sets up the chipset, memory and other components before system memory is available.
POST Code Checkpoints The POST code checkpoints are the largest set of checkpoints during the BIOS pre- boot process. The following table describes the type of checkpoints that may occur during the POST portion of the BIOS : Checkpoint Description 03 Disable NMI, Parity, video for E GA, and DMA controllers.
module for initialization. Initial ize language and font modules for ADM. Activate ADM module. 33 Initializes the silent boot module. Set the window for displaying text information. 37 Displaying sign-on message , CPU information, setup key message, and any OEM specific inform ation.
62 Memo.
Ein wichtiger Punkt beim Kauf des Geräts ECS X58B-A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ECS X58B-A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ECS X58B-A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ECS X58B-A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ECS X58B-A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ECS X58B-A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ECS X58B-A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ECS X58B-A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ECS X58B-A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
