Benutzeranleitung / Produktwartung NSX-D70 des Produzenten Aiwa
Zur Seite of 22
CD Stereo System NSX-D70 En (English) E (Español) F (Français) OPERA TING INSTRUCTIONS MODE D'EMPLOI MANUAL DE INSTRUCCIONES OWNER'S RECORD Record the model number and serial number of your set (found at the rear of your set) below . Refer to them when contacting your Aiwa dealer .
2 En W ARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equ.
3 En T ABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ......... 2 PREPARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ........ 8 CD OPERA TIONS ...........................
4 En Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker (marked "R" on the rear side) to the SPEAKERS R terminals and place it on the right side of the unit.
5 En Main unit: rear 1 AM LOOP , FM 75 Ω terminals Plug in the supplied AM and FM antennas here. 2 VIDEO/AUX jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack).
6 En 1 Dial Function Selects a function (T APE, TUNER, VIDEO/AUX or CD). DECK 1/2 Selects DECK 1 or 2 in T ape function. BAND Selects a band in T uner function. 2 POWER 6 ST ANDBY/ON Switches the unit on and off (standby). DEMO/ECO When the unit is turned off: switches DEMO on and off.
7 En Remote control Buttons with the same or similar names with the main unit basically have the same function. 1 POWER GEQ Enters Graphic Equalizer setting mode. SOUND ENTER 2 0-9, +10 CD: selects a CD track of the specified number . Radio: tunes in to the station with the specified preset number .
8 En ADJUSTMENTS BEFORE OPERA TIONS Power Tu rning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote control). Tu rning the unit off Press POWER 6 ST ANDBY/ON again. The unit goes into standby . DEMO If the clock has not been set, a DEMO appears on the display when the unit is turned of f.
9 En Dimmer Adjusts the brightness of the display . 1 Press DEMO/ECO twice when the unit is turned on, and then within 4 seconds press ENTER. 2 Tu rn MUL TI JOG to select one of the three dimmer modes or " DIM-OFF ", and then press ENTER. " DIM-OFF " is the brightest and " DIMMER 3 " is the dimmest.
10 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playback 1 Tu rn the Dial Function to select the CD function and load disc(s). Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up.
11 En Programmed playback Plays back up to 30 selected tracks in programmed order . 1 Press SHIFT+PROGRAM on the remote control during stop. " PRGM " flashes on the display . 2 Press CD DIRECT on the remote control and then press the numbered button (1-3) within 3 seconds to select a disc.
12 En RADIO OPERA TIONS Manual tuning 1 Tu rn the Dial Function to select the TUNER function. 2 Press BAND to select a band (FM or AM). 3 Press f or g to tune in to a station. " TUNE " is displayed when a station is tuned in. " 1 " lights up for FM stereo reception.
13 En Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully and position for the best reception. If receiving condition is poor , connect optional outdoor antenna to FM 75 Ω terminal.
14 En T APE OPERA TIONS Playback Use only type I (normal) tapes. 1 Tu rn the Dial Function to select the TAPE function. 2 Press z PUSH EJECT/CLOSE on either side (DECK 1 and DECK 2) to open the outer cassette holder and insert the tape in the deck. Insert with the exposed side down and playback side facing out from the unit.
15 En 2 Prepare the source. T o r ecor d CD(s), select the CD function and load disc(s). T o r ecor d a radio broadcast, tune in to the desired station.
16 En Programmed Edit Recording As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape. 1 Insert the recording tape in DECK 2.
17 En SOUND ADJUSTMENTS Grap hic equalizer Selects a sound equalization curve to match the music type. Press MODE once and then turn MUL TI JOG within 4 seconds to select one of the four equalization curves. On the remote control, press GEQ and then press PRESET N or M repeatedly within 4 seconds.
18 En TIMER OPERA TIONS Sleep timer Tu r ns of f the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. " SLP " appears on the display . 2 Press f or g repeatedly to set the sleep timer duration. With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes.
19 En To display the timer setting Press TIMER. The timer -on time, the source and the timer-activated duration are displayed for 6 seconds. Tip : T imer setting can be displayed even while the unit i.
20 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
21 En Specifications MAIN UNIT CX-ND70 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminal 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (10 k.
Printed in Malaysia For assistance and information (United States and Puerto Rico) NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Ein wichtiger Punkt beim Kauf des Geräts Aiwa NSX-D70 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aiwa NSX-D70 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aiwa NSX-D70 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aiwa NSX-D70 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aiwa NSX-D70 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aiwa NSX-D70 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aiwa NSX-D70 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aiwa NSX-D70. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aiwa NSX-D70 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
