Benutzeranleitung / Produktwartung Mobility Scooter des Produzenten Drive Medical Design
Zur Seite of 31
12 Harbor Park Drive, Port Washington, NY 11050 T oll Free: 877-224-0946 • 516-998-4600 Website: www .drivemedical.com OWNERS MANUAL & INSTRUCTIONS.
T ABLE OF CONTENTS PREF ACE & INTRODUCTION 3 SAFETY NOTICE 4 Before Driving While Driving Labeling EMI P ARTS INTRODUCTION 10 Parts Description OPERA TION 11 Control Panel How to Operate Y our Sco.
3 PREF ACE AND INTRODUCTION Please carefully read this owner’ s manual before using the vehicle. Improper use of the vehicle could result in harm, injury or traffic accidents. Therefore for maximum pleasure while using the vehicle please read this owner’ s manual.
4 SAFETY NOTICE Before Driving The user needs to be familiar with the usage and operation of this vehicle before driving. Therefore, please always keep the following safety notices in mind. THE SAME TRAFFIC RULES APPL Y TO THE USE OF THIS VEHICLE AS APPL Y TO PEDESTRIANS • For your safety , please follow the rules that apply to pedestrians.
5 SAFETY NOTICE WHILE DRIVING • Please carr y out daily inspections. • Refer to the section entitled “DAIL Y CHECKING” • Do not move your body out of the vehicle while moving • Such action may cause you to loose balance and risk injury from falling.
6 SAFETY NOTICE ST ARTING AND DRIVING 1. Make sure the seat is installed properly . 2. Make sure the tiller has been secured properly . 3. Fold down the armrests so you can rest your arms on them. 4. T urn the power switch to “ON”. If necessary , turn on the headlights.
7 SAFETY NOTICE STOPPING 1. Release the speed control lever completely . The vehicle will naturally brake and stop. 2. T urn the power switch to (OFF). Then pull out the key . LABELING Please carefully read all labels on the scooter before driving it.
8 SAFETY NOTICE EMI This portion of the content will provide the user with basic information that describes the problems with EMI, known sources of EMI, protective measures either to lessen the possibility or exposure or to minimize the degree of exposure, and suggested action should unexpected or erratic movement occur .
9 SAFETY NOTICE 3. Long-range transmitters and transceivers, such as commercial broadcast transmitter (radio and TV broadcast antenna towers) and amateur (HAM) radios.
10 P AR TS INTRODUCTION P ARTS DESCRIPTION 1. Speed Dial 2. Armrest 3. Front Indicator Lamp 4. Charger Socket Cover 5. Basket 6. Tiller 7. Tiller Adjustment Knob 8. Head Lamp 9. Seat 10. Seat Rotation Lever 11. Hand Brake Lever 12. Side Reflector 13. Rear Lamp 14.
11 OPERA TION CONTROL P ANEL 1. Speed Dial 2. Horn Button 3. Indicator lamp switch 4. Head light / Rear Light Button 5. Speed Control Lever 6. Battery Indicator 7.
12 OPERA TION Horn Button Press the horn button to sound the horn. Release the button to stop the horn. Light Button Push the light button to switch the front and rear lights on.
13 OPERA TION BRAKING Electro-magnetic brake: Release the speed control lever completely , and the electromagnetic brake will be activated automatically , and the scooter will stop. WARNING When on a gradient NEVER switch the vehicle to the freewheel mode.
14 OPERA TION WARNING Please hold the tiller before loosing the tiller adjustment knob. Otherwise a fall from the scooter could occur causing bodily injury and/or damage to scooter . Manual Brake As well as an electromagnetic brake, your scooter has a manual cable brake.
15 OPERA TING YOUR ODYSSEY ST ARTING AND DRIVING 1. Make sure the seat is installed properly . 2. Make sure the tiller has been secured properly . 3. Fold down the armrests so you can rest your arms on them. 4. T urn the power switch to “ON”. 5. Check battery indicator to see whether there is enough power for your journey .
16 OPERA TING YOUR ODYSSEY MAIN CIRCUIT BREAKER (RESET BUTTON) When the voltage in your scooter’ s batteries becomes low or the scooter is heavily strained because of excessive loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from damage.
17 BA TTER Y CHARGING AND CARE CHARGING THE BA TTERY Follow the procedure below step by step: 1. T urn the power switch to (OFF) 2. Connect the charger’ s power cord into the power outlet. 3. Open the charging socket cap on the scooter’ s tiller .
18 BA TTER Y CHARGING AND CARE A TTENTION: Please follow the rules below to avoid accidents while charging. 1. Please use the charger that comes with your scooter only , and recharge the battery to its full capacity every time. Y ou may damage the batter y and scooter if you use a charger , which is not to the correct specification.
19 BA TTER Y CHARGING AND CARE BA TTERY • Do not expose the battery to temperatures below 50°F or above 122°F when charging or storing the vehicle. Under the above temperature range can cause the battery either to freeze or over heat. This will damage the batteries and shorten their life.
20 INSPECTION AND MAINTENANCE DAIL Y CHECKING Check following items before driving. If your find anything abnormal, contact an authorized dealer for further inspection or advice before using the battery .
21 INSPECTION AND MAINTENANCE REGULAR CHECKING RECORD T o make sure your scooter is correctly serviced, take it to your dealer for regular maintenance checks. This should be at intervals of six months after the first inspection after one month. Y our dealer may charge a fee for this.
22 INSPECTION AND MAINTENANCE BA TTERY , FUSE AND TIRE BA TTERY Refer to the section entitled “BA TTERY” in “BA TTERY CHARGING AND CARE ”. FUSE If the battery charger is turned on and no LEDs are lit, check the batter y charger fuse.
23 INSPECTION AND MAINTENANCE A TTENTION 1.When tread depth is below 0.5 cm it can easily lead to vehicle slippage, making braking distances longer . Therefore replace the tires as early as possible when they are found to have insufficient tread depth.
24 DISASSEMBLING THE SCOOTER The procedures for assembling and disassembling are very similar for the scooters. The following procedure is to disassemble the scooter for transportation: 1. Switch off the scooter at the key ignition. 2. Unscrew the seat hand wheels and remove seat.
25 TROUBLE SHOOTING AND SPECIFICA TION PROBLEM REMEDY SCOOTER WILL NOT SWITCH ON THE SCOOTER SWITCHES ON, BUT THE SCOOTER WILL NOT MOVE. THE SCOOTER APPEARS SLOW THE SEA T TURNS WHEN IN OPERA TION THE.
26 SPECIFICA TION MODEL REFERENCE ODYSSEY DIMENSION 55.1" X 26.4 " X 39.8 " (L X W X H) WEIGHT , WITHBA TTERY 210 lbs. WITHOUT BA TTERY 162 lbs.
27 Life Time W arranty: Scooter frame We will repair the frame with new or refurbished parts, free of charge, In the USA in the event of defective materials or workmanship. One Y ear Limited Warranty: • Electronic controller • Drive train components Drive will repair these products with new or refurbished parts, free of charge, in the U.
28 Warranty Exclusions • ABS plastic shrouds • Batteries (batteries are warranted by the battery manufacturer) • Tires and T ubes This warranty is extended only to the original purchaser . Y our original receipt will be necessary as proof of purchase before any warranty performance is rendered.
29 Warranty Registration Please type or print Serial#__________________________________________Date Purchased___/___/___ Owner Name ___________________________________________________________ Address .
Place Stamp Here 12 Harbor Park Drive Port Washington, NY 11050 FOLD HERE FIRST FOLD HERE SECOND SEAL WITH T APE DO NOT ST APLE.
12 Harbor Park Drive, Port Washington, NY 11050 T oll Free: 877-224-0946 • 516-998-4600 W ebsite: www .drivemedical.com.
Ein wichtiger Punkt beim Kauf des Geräts Drive Medical Design Mobility Scooter (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Drive Medical Design Mobility Scooter noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Drive Medical Design Mobility Scooter - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Drive Medical Design Mobility Scooter reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Drive Medical Design Mobility Scooter erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Drive Medical Design Mobility Scooter besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Drive Medical Design Mobility Scooter verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Drive Medical Design Mobility Scooter. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Drive Medical Design Mobility Scooter gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
