Benutzeranleitung / Produktwartung HV-DH10 des Produzenten Aiwa
Zur Seite of 58
PA L 9-885-031- 37 © 2003 Son y Cor por ation DVD Player/Stereo Video Cassette Recorder HV -DH10E PM/HV-DH1(EH)/Eng/01-06 4/16/03, 4:58 PM 1.
2 Safety Precautions ENGLISH W ARNING T o prevent fire or shoc k hazard, do not expose the unit to rain or moisture. T o av oid electrical shoc k, do not open the cabinet. Refer servicing to qualified personnel only . Mains lead must onl y be changed at a qualified service shop.
INTR ODUCTION 3 T able of Contents Introduction Safety Precautions ................................................. 2 W ARNING .......................................................... 2 Caution ......................................................
4 About This Manual Most operations of the unit can be accomplished with the remote control. Operations which must be accomplished with controls on the front panel of the unit are also explained.
INTR ODUCTION 5 2 Bef ore Use (Continued) Notes on D VDs Some playbac k operations of D VDs may be intentionally fixed b y software manuf acturers. As this unit plays D VDs according to disc content designed by the softw are manuf acturer , some playbac k features of the unit ma y not be av ailable or other functions ma y be added.
6 Precautions Handling the Unit When shipping the unit The original shipping car ton and packing materials come in handy . F or maximum protection, re-pack the unit as it was originally packaged at the f actor y . When setting up the unit The picture and sound of a nearby TV , VCR, or radio may be distorted during playbac k.
INTR ODUCTION 7 Fr ont P anel and Display Windo w AV 3 IN REC L – AU DIO – R VIDEO CHANNEL DVD/VIDEO q e u w r t y i o !0 !1 !2 !3 !4 !5 !6 q I/ 6 (PO WER) switch w Disc T ray (D VD deck) e z (OPE.
8 Rear P anel AER IAL VIDEO IN + OUT/D VD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO D VD/VIDEO OUT D VD/VIDEO OUT COAXIAL D VD EXCLUSIVE OUT q u t w y e r q AERIAL (antenna) inpu.
INTR ODUCTION 9 Remote Contr ol C.LOCK SHOWVIEW q w e r y i !0 !1 !2 @1 !9 @5 @6 @7 @3 !4 !5 u o !3 @0 @4 !7 !6 @2 t @8 !8 Remote Contr ol for D VD Things to know bef ore starting ➤ This remote control uses the same buttons f or VCR and D VD functions (ex.
10 Remote Contr ol (Continued) C.LOCK SHOWVIEW q w e t r i u o !1 @0 @1 @2 !8 !5 !6 !3 !0 !2 !9 !4 !7 y @3 Remote Contr ol for VCR Things to know bef ore starting ➤ This remote control uses the same b uttons for VCR and D VD functions (ex. C (PLA Y)).
INTR ODUCTION 11 Remote Contr ol (Continued) Preparing the Remote Contr ol Inserting the Batteries T o prevent damage fr om leakage or explosion, follo w the descriptions below . • Insert two R03 (size AAA) batteries (supplied) with the 0 and 9 marks correctl y as illustrated.
12 Basic Connections AER IAL VIDEO IN + OUT/DVD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO DVD/VIDEO OUT DVD/VIDEO OUT COAXIAL DVD EXCLUSIVE OUT Cable bo x Antenna Satellite recei.
PREP ARA TION 13 Basic Connections (Continued) When connecting to a wide screen TV This unit can pla yback a D VD and video cassette tape recorded with (16:9) wide screen f or mat.T o change the settings, see “ TV Aspect ” on page 27 and “ Wide Screen Compatibility 16:9 ” on page 42.
14 Additional Connections AER IAL VIDEO IN + OUT/DVD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO DVD/VIDEO OUT DVD/VIDEO OUT COAXIAL DVD EXCLUSIVE OUT P ay TV decoder P ay TV satel.
PREP ARA TION 15 Additional Connections (Contin ued) AER IAL VIDEO IN + OUT/DVD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO DVD/VIDEO OUT DVD/VIDEO OUT COAXIAL DVD EXCLUSIVE OUT Co.
16 AER IAL VIDEO IN + OUT/DVD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO DVD/VIDEO OUT DVD/VIDEO OUT COAXIAL DVD EXCLUSIVE OUT A udio cord (not supplied) to the audio input L/R ja.
PREP ARA TION 17 AER IAL VIDEO IN + OUT/DVD OUT EURO A V2 DECODER EURO A V1 AUDIO/VIDEO RF OUT AUDIO A UDIO DVD/VIDEO OUT DVD/VIDEO OUT COAXIAL DVD EXCLUSIVE OUT A udio cord (not supplied) Stereo syst.
18 i /SETUP OK/ENTER, i + / k –, j / l INPUT SELECT VIDEO Numeric buttons Bef ore Operation – VCR P ar t Preparation: • T ur n on the TV and set the TV for the unit ’ s reception. • When the unit and TV are connected with a 21-pin scar t cord, set the TV to the A V mode.
PREP ARA TION 19 Bef ore Operation – VCR P ar t (Continued) Tip T o re-star t Auto set-up , press i /SETUP . And press j / l to select A CMS, then press OK/ENTER. Press j / l to select the letter of your country , then press OK/ENTER to star t A uto set-up.
20 Bef ore Operation – VCR P ar t (Continued) 4 Press OK/ENTER. Press INPUT SELECT to select C (Standard stations) or S (Cable stations): C02 – C69, S01 – S41. Enter the channel number of station that y ou want to tune with the n umeric buttons or use i +/ k – to find the required station.
PREP ARA TION 21 Bef ore Operation – VCR P ar t (Continued) Changing the Or der of TV Stations After tuning TV stations into the unit you ma y wish to change the order in which they are stored without having to retune them again. The instr uctions giv en on this page will show y ou how y ou can simply mov e them into your desired order .
22 Bef ore Operation – VCR P ar t (Continued) Deleting TV Stations After tuning TV stations into the unit you ma y wish to delete a station. The instructions given on this page will sho w you ho w easily delete any unw anted TV stations. 1 Press i /SETUP and the main menu will appear .
PREP ARA TION 23 Setting the Cloc k Manually Y ou must set the date and time for timer recordings . 1 Press i /SETUP and the main menu will appear . 2 Press j / l to select the TIME D A TE, then press OK/ENTER.
24 Bef ore Operation – VCR P ar t (Continued) Setting the Language The on-screen menu can displa y one of follo wing six languages: English, Ger man, F rench, Italian, Spanish and Dutch. 1 Press VIDEO to switch out to the VCR. 2 Press i /SETUP and the main menu will appear .
PREP ARA TION 25 Bef ore Operation – D VD P ar t General Explanation This manual giv es the basic instructions for oper ating the unit. Some D VDs require specific operation or allow only limited operation during pla yback.
26 i /SETUP DV D Numeric buttons CLEAR OK/ENTER, i + / k – , j / l v RETURN Options Function (Press i +/ k – to select desired option) Selection Method T rac k Number 1/10 Shows the current trac k number and j / l or skips to the desired trac k number .
PREP ARA TION 27 Menu Language Y ou choose what languages are display ed for the setup menu. Disc Subtitle Disc Menu Rating TV Aspect Menu Language Digital Audio Output Disc Audio Others Country Code .
28 Bef ore Operation – D VD P ar t (Continued) Digital A udio Output Each D VD disc has a variety of audio output options. Set the digital audio output of the unit, according to the type of audio system y ou use. DOLBY DIGITAL /PCM Stream/PCM PCM Sample Freq.
PREP ARA TION 29 Others Y ou can tur n on and off the DRC (Dynamic Range Control) and PBC (Pla yback Control) functions . Others DRC Disc Subtitle Disc Menu Rating TV Aspect Menu Language Digital Audio Output Disc Audio Others Country Code Progressive Scan PBC On On 1 Select “ Others ” on the setup menu using i +/ k – , then press l .
30 Bef ore Operation – D VD P ar t (Continued) 3 Press i +/ k – to select the desired restriction lev el and press OK/ENTER. 8 Blocked 7 Blocked 6 5 4 3 2 1 Unlock Change Disc Subtitle Disc Menu R.
PREP ARA TION 31 Bef ore Operation – D VD P ar t (Continued) Country Code After specifying the restriction lev el in the previous “ Rating ” section, set the country code so that the set restriction lev el is adjusted to the cinema rating system of the countr y where the D VD disc was produced.
32 Operation with T ape r C.LOCK i /SETUP a P A USE/ FRAME F z TV/VIDEO CLOCK/ COUNTER CM SKIP Numeric buttons A UDIO t (SLOW T ) C SHOWVIEW OK/ENTER, CH/TRACKING i + / k – , j / l s ST OP I/ 6 INPUT SELECT REC.
OPERA TION 33 Operation with T ape (Continued) CM Skip (Commercials Skip) This feature enab les you during playbac k of a tape to skip a commercial break in a f ew seconds , then resume nor mal pla yback. While tape is pla ying press CM SKIP to skip commercial (or another program material).
34 Operation with T ape (Continued) T o pause while recording Press a P A USE/FRAME F to av oid recording unwanted scenes . Press a P A USE/FRAME F to continue recording. • T apes can be paused for up to 5 minutes; RECP will be displa yed when a tape is paused.
OPERA TION 35 Operation with T ape (Continued) 8 Press j / l until the blank space between endtime and tape speed is highlighted. Then press i +/ k – to switch VPS/PDC on or of f. Press l to select the recording speed. Press i +/ k – to select the desired tape speed (SP , IP , or LP).
36 Operation with T ape (Continued) Timer Recor ding Using On Screen Displa y Y ou may set up to 7 timer record e vents within one month of the current date. Note Bef ore setting the timer make sure that y ou have set the unit ’ s clock correctly and you kno w which stations you hav e tuned TV stations on the unit.
OPERA TION 37 Operation with T ape (Continued) 9 Press j / l until the blank space between endtime and tape speed is highlighted. Then press i +/ k – to switch VPS/PDC on or of f. Press l to select the recording speed. Press i +/ k – to select the desired tape speed (SP , IP , or LP).
38 Copying fr om D VD to VCR This unit allows y ou to copy the contents of a D VD to a video cassette tape. Note If the D VD you are attempting to copy is cop y protected, you will not be able to cop y the disc. It is not per mitted to cop y Macrovision encoded D VDs.
OPERA TION 39 Operation with T ape (Continued) On Screen Display Y ou may easily displa y the current time or tape counter , amount of tape left, day , month, year , day of week, progr am channel, tape speed and operational mode of the unit will appear on the TV screen.
40 REC. End Searc h Y ou can fast-forward or rewind the tape at the end of the recorded program automatically . Press REC. END SEARCH during stop. The unit starts searching. Searching stops automatically after fast-forwarding or rewinding as below: Fast-f orward blank blank recorded recorded Press REC.
OPERA TION 41 Operation with T ape (Continued) Hi-Fi Stereo Sound System This unit will record and pla yback Hi-Fi stereo sound. In addition it has a NICAM digital stereo sound decoder . This allows y ou to record and pla yback the sound in se ver al different w ays.
42 Operation with T ape (Continued) Wide Screen Compatibility 16:9 This unit can record and pla y back wide screen aspect ratio progr ams (16:9). T o record a wide screen f or mat progr am successfully the correct type of wide screen signal must be broadcast b y the TV station.
OPERA TION 43 4 Press z (OPEN/CLOSE) to close the tra y . Disc icon appears in the displa y window , and pla yback star ts automatically . If playbac k does not star t, press C .
44 Operation with D VD and Video CD (Continued) T o stop playbac k Press s ST OP . T o turn the power off Press I/ 6 . The unit enters pow er off standby mode . No turning off the power during timer recor ding During O TR (One-T ouch Recording), ShowView recording or timer recording, the unit cannot be turned off until recording has stopped.
OPERA TION 45 Operation with D VD and Video CD (Continued) Repeat CHAPTER TITLE TRACK ALL Off D VD Video Discs – Repeat Chapter/Title/Off 1 T o repeat the chapter currently pla ying, press REPEA T . The Repeat Chapter icon appears on the TV screen. 2 T o repeat the currently pla ying title, press REPEA T a second time.
46 Operation with D VD and Video CD (Continued) Changing the A udio T rack STER. Press A UDIO repeatedly during playback to hear diff erent audio trac k (Stereo , Left or Right). Zoom The Zoom function allows y ou to enlarge the video image and to mov e through the enlarged image.
OPERA TION 47 Operation with D VD and Video CD (Continued) Special D VD Features Camera Angle 1/1 If the disc contains sequences recorded from diff erent camera angles , the angle icon appears on the display . Y ou can then change the camera angle if you wish.
48 Operation with A udio CD and MP3 Discs Pla ying A udio CD and MP3 Discs This unit can pla y MP3 f or matted recordings on CD- ROM, CD-R, or CD-R W discs. Bef ore playing MP3 recordings , read the notes on MP3 Recordings on page 49. 1 Inser t a disc and close the tra y .
OPERA TION 49 Operation with A udio CD and MP3 Discs (Continued) Random Y ou can playbac k in random order within a disc or folder . 1 Press RANDOM during playbac k or in stop mode. The unit automatically begins Random Pla yback and “ RAND . ” appears on the menu screen.
50 Pr ogrammed Pla ybac k Pr ogrammed Playbac k Y ou can select up to 30 tracks and pla y them in the progr ammed order . 1 Press PROGRAM in stop mode . The “ E ” mark appears on the upper r ight of the program list. CD TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 1:05:22 STER.
OPERATION 51 Operation with D A T A-CD containing JPEG files Displa ying JPEGs • Use discs that hav e been recorded in compliance with the ISO 9660 CD-ROM file system. • This pla yer is compatib le with CD-R/CD-R W/CD- ROMs containing JPEG files (some recording methods ma y not allow discs to be pla yed).
52 T r oubleshooting Check the f ollowing guide f or the possible cause of a prob lem before contacting service. Symptom No pow er . The power is on, b ut the unit does not wor k. No picture. No sound. The playbac k picture is poor . The unit does not star t pla yback.
53 REFERENCE T r oubleshooting (Contin ued) Symptom Camcorder image is not shown. Camcorder image via A/V input to the unit is not shown on TV screen. Timer recording is not possible . indicator light appears while the unit is turned on. Correction • T ur n camcorder on and operate properly .
54 Country Code List Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles A O Angola AQ Antarctica AR Argenti.
55 REFERENCE Code Country MT Malta MU Mauritius MV Maldives MW Malawi MX Mexico MY Malaysia MZ Mozambique NA Namibia NC New Caledonia (F rench) NE Niger NF Norfolk Island NG Nigeria NI Nicaragua NL Ne.
56 Language Code List Enter the appropriate code number f or the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 27).
57 REFERENCE General P ower requirements AC 200–240 V , 50 Hz P ower consumption 23 W Dimensions (approx.) 430 × 97.5 × 293 mm (w × h × d) Mass (appro x.
Sony Corporation Printed in Indonesia http://www .aiwa.com/ PM/HV-DH1(EH)/Eng/52-58 4/16/03, 5:16 PM 58.
Ein wichtiger Punkt beim Kauf des Geräts Aiwa HV-DH10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Aiwa HV-DH10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Aiwa HV-DH10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Aiwa HV-DH10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Aiwa HV-DH10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Aiwa HV-DH10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Aiwa HV-DH10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Aiwa HV-DH10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Aiwa HV-DH10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
