Benutzeranleitung / Produktwartung 2010 Grand Caravan des Produzenten Dodge
Zur Seite of 530
Grand Caravan OWNER’ S MANUAL 2010.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 䡵 Sentry Key 威 .......................... 1 4 ▫ Replacement Keys ..................... 1 5 䡵 V ehicle Security Alarm — If Equipped .
䡵 Sliding Side Door ...................... 4 1 ▫ Power Sliding Side Door — If Equipped ..... 4 2 ▫ Sliding Side Door Child Protection Lock ..... 4 6 䡵 Liftgate ............................. 4 8 ▫ Power Liftgate — If Equipped ............
䡵 Rear Seat Delete Feature (Commercial V ehicles Only) — If Equipped ..... 9 6 ▫ Restraining Infants And Small Children W ith Seat Delete Feature (Commercial V ehicles Only) .............. 9 7 䡵 Engine Break-In Recommendations .......... 9 9 䡵 Safety T ips .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
NOTE: Power window switches will also remain active for up to 90 seconds after the ignition switch has been turned to LOCK, depending upon the accessory delay setting. Opening the front door will cancel this featur e. W ARNING! NEVER leave children alone in a vehicle.
vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid Key Fob is used to start the engine. After turning the ignition switch to the ON position, the V ehicle Security Light will turn on for three seconds for a bulb check.
CAUTION! Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is pr ovided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location.
lamps and/or turn signals will flash and V ehicle Security Light will flash repeatedly and the horn will sound. For an additional 15 minutes, only the headlights, park lamps and/or turn signals and V ehicle Security Light will flash. The engine will run only if a valid key is used to start the vehicle.
• The V ehicle Security Alarm r emains armed during liftgate entry . Pressing the liftgate button will not disarm the V ehicle Security Alarm. If someone enters the vehicle through the liftgate and opens any door the alarm will sound. • When the V ehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
NOTE: • The front courtesy over head console and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position). • The Illuminated Entry System will not operate if the dimmer control is in the extr eme downward position.
Using the RKE T ransmitter Three-button RKE transmitters will pr ovide basic UN- LOCK, LOCK and P ANIC functions. Seven-button RKE transmitters will provide functions that allow the same basic operation as the three-button, but may also be used to operate the power liftgate (optional), power sliding doors, Remote Start feature (optional).
Remote Unlock Doors and Liftgate Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s side or twice to unlock all doors and liftgate.
NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the V ehicle Security Alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the V ehicle Security Alarm.
2. Press the LOCK button on a programmed RKE trans- mitter for at least 4 seconds, but no longer than 10 sec- onds. Then, press the P ANIC button while still holding the LOCK button.
If the liftgate is locked and is not equipped with a powered liftgate, pr essing the LIFTGA TE button twice will result in the liftgate becoming unlocked for 30 sec- onds allowing you to manually access the liftgate area. The power liftgate may also be opened and closed by pressing the LIFTGA TE button located on the overhead console.
• For vehicles not equipped with the EVIC, perform the following steps: 1. Perform this operation while standing outside the vehicle. 2. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds.
T ransmitter Battery Replacement The recommended r eplacement battery is one CR2032 battery . NOTE: • Perchlorate Material — special handling may apply . See: www .dtsc.ca.gov/hazardouswaste/per chlorate. • Do not touch the battery terminals that are on the back housing or the printed circuit boar d.
REMOTE ST ARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security .
T o Enter Remote Start Mode Press and r elease the REMOTE ST ART button on the RKE transmitter twice within five sec- onds. The vehicle doors will lock, parking lights will flash and horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle.
equipped). Then, prior to the end of the 15-minute cycle, insert the Key Fob into the ignition switch and turn the switch to the ON position. NOTE: • The ignition switch must be in the ON position in order to drive the vehicle.
When to Reset Remote Start The vehicle can be started remotely up to a maximum of two times. The vehicle is also allowed a maximum of one failed start, where the Remote Starting sequence was initiated but the engine stopped cranking without start- ing.
If the lock plunger is rearwar d when you shut either side sliding door , the door will lock. Make sure the keys ar e not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Power Door Locks — If Equipped A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate.
If you press the power door lock switch while the sliding door is open, the sliding door will lock. Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
2. Fasten your seat belt. (Fastening the seat belt will cancel any chiming that may confuse you during this programming pr ocedure.) 3. Place the Key Fob into the ignition. 4. W ithin 15-seconds, cycle the ignition Key Fob from the LOCK position to the ON/RUN position a minimum of five times, ending in the ON position (do not start the engine) .
• On vehicles equipped with the optional Electronic V ehicle Information Center (EVIC), refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understand- ing Y our Instrument Panel” for further information.
WINDOWS Power V ent Windows — If Equipped Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat. Power Windows Y ou can control either the fr ont or rear windows using switches located on the driver’s door trim panel.
NOTE: Power W indow switches will also remain active for up to 10 minutes after the ignition switch has been turned to LOCK, depending upon the accessory delay setting.
Front Passenger Power W indow Switch There is a single switch on the fr ont passenger’s door trim panel which operates the passenger door window and locks and unlocks all doors. The switch will operate only when the ignition switch is in the ON or ACC position and during power accessory delay .
Sliding Side Door Power W indow Switch — If Equipped Second row passengers may open and close the sliding door window by a single switch on the door handle assembly . The switches will operate only when the ignition switch is in the ON or ACC position and during power acces- sory delay .
Auto-Down Feature — If Equipped The front window switches may be equipped with an Auto-Down feature. Pr ess the window switch past the detent, release, and the window will go down automati- cally . T o open the window part way , press the window switch part way and release it when you want the window to stop.
W ARNING! There is no anti-pinch protection when the window is almost closed. T o avoid personal injury be sure to clear your arms, hands, fingers and all objects from the window path before closing. Auto Up Reset — If Equipped T o reactivate the Auto Up featur e, perform the following steps after vehicle power is restor ed: 1.
T o keep your door operating properly , observe the fol- lowing guidelines: • Always open the door smoothly . • A void high impacts against the door stop when open- ing the door . This is very important when your vehicle is parked on an incline as the door will slide faster in the downhill direction.
Press the button on the RKE transmitter twice within five seconds to open a power sliding door . When the door is fully open, pressing the button twice within five seconds a second time will close the door .
T o avoid unintentional operation of the power sliding doors from the r ear seats, press the power sliding door master lock button, located in the overhead console, to disable the switches and handles for the rear seat passengers.
2. Cycle the ignition switch ON/LOCK five times ending in the ON position (do not start the engine). 3. W ithin 10 seconds of the final cycle, press the HAZ- ARD switch. 4. A single chime will sound to signify that you have successfully completed the programming.
Sliding Side Door Child Protection Lock T o provide a safer envir onment for small children riding in the rear seats, the sliding doors ar e equipped with a Child Protection Door Lock system.
• When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the RKE transmitter , the switches on the overhead console or the switches located on the trim panel just in front of the power sliding door .
NOTE: • After setting the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. • The power sliding side door switches will not open the power sliding doors if the vehicle is in gear or the vehicle speed is above 0 mph (0 km/h).
If the liftgate is locked and is not equipped with the power liftgate feature, pr essing the button on the RKE transmitter will result in the liftgate becoming unlocked for 30 seconds allowing you to manually access the liftgate area.
The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate.
• There ar e also pinch sensors attached to the side of the liftgate opening. Light pressur e anywhere along these strips will cause the liftgate to return to the open position. • The power liftgate must be in the full open or close positions for any of the buttons to operate.
Gas props support the liftgate in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather .
If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems. For mor e information on LA TCH, see Lower Anchors and T ether for CHildr en (LA TCH).
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thr own from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too.
W ARNING! • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job properly .
Pull the strap down and secure the small latch plate of the lap belt into the small buckle until you hear a “click”. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. When the belt is long enough to fit, insert the large latch plate into the buckle until you hear a “click.
As a guide, if you are shorter than average you will prefer a lower position, and if you ar e taller than average you will prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
Seat Belt Pretensioners — If Equipped The seat belts for both front seating positions may be equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
When AHRs deploy during a rear impact, the fr ont half of the head restraint extends forwar d to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or r educe the extent of injuries to the driver and front passenger in certain types of rear impacts.
CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The AHR fr ont soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have difficulties or pr oblems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
front passenger seat is unoccupied. The BeltAlert 威 warn- ing system may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped).
NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt Reminder Light will continue to illuminate while the driver’s seat belt remains unbuckled or retracted. Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancies.
instrument panel, above the glove compartment. The words SRS AIRBAG ar e embossed on the airbag covers. NOTE: These airbags are certified to the new Federal regulations for Advanced Airbags. The Advanced Front Airbags have a multistage inflator design.
NOTE: • Airbag covers may not be obvious in the interior trim; but they will open during airbag deployment. • After any collision, the vehicle should be taken to an authorized dealer immediately .
the second stage determines whether the output force is low , medium, or high. If a low output is sufficient to meet the need, the remaining gas in the inflator is expended.
When the airbag deploys, it opens the seam between the front and side of the seat’s trim cover . Each airbag deploys independently , that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag.
The system includes side impact sensors adjacent to both front and r ear seat occupants that are calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection.
W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion.
If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are pr ovided under ⬙ If Y ou Need Assistance ⬙ in this manual. W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision.
deploys the Advanced Fr ont Airbags, SABIC airbags — if equipped, Supplemental Seat-Mounted Side Airbags — if equipped, and front seat belt pr etensioners — if equipped, as requir ed, depending on the severity and type of impact.
The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the ORC turns on the Airbag W arning Light in the instrument panel for appr oxi- mately four to six seconds for a self-check when the ignition is first turned on.
separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and fr ont passenger .
covers the window . The airbag inflates in about 30 ms (about one-quarter of the time that it takes to blink your eyes) with enough force to injur e you if you are not belted and seated properly , or if items are positioned in the ar ea where the side curtain airbag inflates.
NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something is wrong with the airbag system. If you do have a collision which deploys the airbags, any or all of the.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you.
Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately .
2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may.
4. Otherwise required by law . Data parameters that are r ecorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled safety systems, including the airbag system .
T o position a child into the Integrated Child Booster Seat follow these steps: 1. Pull the release handle forward to r elease the latch and seat cushion.
2. Place the child upright in the seat with their back firmly against the seatback. 3. Grasp the latch plate and pull out the seat belt. 4. Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around the child’s lap.
Integrated Child Seat — If Equipped Operating instructions for the second r ow bench seat with Integrated Child Seat are included with the seat. If the instructions ar e not with the seat or in the Owner’s Manual Package, replacement instr uction can be ob- tained.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are.
W ARNING! Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a front passenger airbag. An airbag deployment could cause severe injury or death to infants in this position.
Children T oo Large for Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat.
W ARNING! (Continued) • Occupants riding in Swivel ’n Go seating must be wearing their seat belt and the seat must be locked in either the forward or rearward position.
belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. • If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again.
Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint.
• If your child restraint seat is not LA TCH-compatible, install the restraint using the vehicle seat belts. Installing the Lower Attachments: 1. The vehicle lower anchorages are round bars located at the rear of the seat cushion wher e it meets the seatback.
Installing the T op T ether Strap (with either Lower Anchors or V ehicle Seat Belt): 1. Route the top tether strap under the adjustable head restraint between the steel posts. 2. Provide enough slack (refer ence child restraint in- structions) for the tether strap to r each the tether anchor located near the bottom of the seat back.
W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. REAR SEA T DELETE FEA TURE (COMMERCIAL VEHICLES ONL Y) — IF EQUIPPED Commercial car go vehicles are not designed for use as a family vehicle and are not intended for carrying childr en in the front passenger seat.
W ARNING! Rearward-facing infant restraints must never be se- cured in the passenger seat of a vehicle with a passenger airbag. In an accident, a passenger airbag may deploy causing severe injury or death to infants riding in rearward-facing infant restraints.
• Children mor e than 40 lbs (18 kg) should be secured in the passenger seat in a child restraint or belt- positioning booster seat with the seat adjusted to the rear most position .
W ARNING! The vehicle tether anchor is designed to be used with a child restraint only . It should not be used for any other purpose. Before use, inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads. If these or any other condition that might affect the performance of the strap is observed, DO NOT USE that strap.
SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
If you are r equired to drive with the liftgate open, make sure that all windows ar e closed and the climate control BLOWER switch is set at high speed. DO NOT use the recir culation mode. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
Airbag W arning Light The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer . If the light stays on, flickers, or comes on while driving, have the system checked by an autho- rized dealer .
W ARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and inter- fering with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats.
Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect the tr ead and sidewall for cuts and cracks.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................. 1 1 0 ▫ Inside Day/Night Mirror — If Equipped . . . 1 10 ▫ Automatic Dimming Mirror — If Equipped . . 1 10 ▫ Outside Mirrors ....................
▫ Manual Front And Second Row Seat Adjuster ....................... 1 2 4 ▫ Manual Reclining Seats — If Equipped ..... 1 2 4 ▫ Manual Lumbar Adjust Lever — If Equipped ........................ 1 2 6 ▫ Eight–W ay Power Seats — If Equipped .
▫ Front Fog Lights — If Equipped .......... 1 6 0 ▫ Battery Protection .................... 1 6 0 ▫ Multifunction Lever .................. 1 6 0 ▫ T urn Signals ........................ 1 6 0 ▫ Lane Change Assist ................... 1 6 1 ▫ High/Low Beam Switch .
䡵 Parkview 威 Rear Back Up Camera — If Equipped .......................... 1 8 1 ▫ T urning Parkview 威 On Or Off — W ith Navigation/Multimedia Radio ....... 1 8 2 ▫ T urning Parkview 威 On Or Off — W ithout Navigation/Multimedia Radio .
▫ Second Row Seat Storage Bins — If Equipped ........................ 2 0 4 ▫ Storage Bin Safety W arning ............. 2 0 6 ▫ Coat Hooks ........................ 2 0 7 ▫ Cargo Ar ea Storage ................... 2 0 8 䡵 Console Features ..
MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror . Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Driver’s Automatic Dimming Mirror — If Equipped The driver’s outside mirror will automatically adjust for glare fr om vehicles behind you. This feature is contr olled by the inside automatic dimming mirror and can be turned on or off by pr essing the button at the base of the inside mirror .
Select a mirror and pr ess one of the four arrows for the direction you want the mirr or to move. Driver’s side power mirror pr eselected positions can be controlled by the optional Driver Memory Seat Featur e. Refer to “Driver Memory Seat” in “Understanding the Features of Y our V ehicle” for further information.
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is located on the sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upwar d. The lights turn on automati- cally . Closing the mirror cover turns off the lights.
When the vehicle is started, the BSM warning light will be momentarily illuminated in both outside rear view mirrors to let the driver know that the system is opera- tional. The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand by mode when the vehicle is in P ARK.
The area on the r ear fascia where the radar sensors ar e located must remain fr ee of snow , ice, and dirt/road contamination so that the BSM system can function properly . Do not block the area of the r ear fascia where the radar sensors are located with for eign objects (bumper stickers, bicycle racks, etc.
The BSM system monitors the detection zone from thr ee differ ent entry points (Side, Rear , Front) while driving to see if an alert is necessary . The BSM system will issue an alert during these types of zone entries. Entering From The Side V ehicles that move into your adjacent lanes from either side of the vehicle.
Overtaking T raf fic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the differ ence in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Stationary Objects Opposing T raffic 3 UNDERST ANDING THE FEA TURES OF YOUR .
W ARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals.
NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other str uctures or vehicles, the system will not be able to alert the driver . When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including radio muting.
signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are pr esent on the same side at the same time, both the visual and audio alerts will be issued.
VOICE COMMAND — IF EQUIPPED V oice Command can be initiated by pressing the VR button located on the radio or steering wheel controls (if equipped). Refer to “V oice Command” in the Uconnect™ Phone User Manual located on the DVD for further details.
Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar upward and move the seat to the desir ed position. Release the bar to lock the seat into position. Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched.
W ARNING! DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment lever is located on the outboard side of the seat. T o increase the support, r otate the lever downward. T o decrease the support, rotate the handle upward. W ARNING! Adjusting a seat while the vehicle is moving is dangerous.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for fr ont heated seats are located on the center instrument panel ar ea. After turning the ignition ON, you can choose from High, Low , or Off heat settings.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
T o raise the head restraint, pull upwar d on the head restraint (on some models, you may need to pr ess the push button). T o lower the head restraint, pr ess the push button, located at the base of the head restraint, and push downward on the head r estraint.
NOTE: • The head restraints should only be r emoved by quali- fied technicians, for service purposes only . If either of the head restraints r equire r emoval, see your autho- rized dealer .
W ARNING! (Continued) • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of an accident and could result in serious injury or death.
3. Slide the storage bin locking mechanism to the ⬙ LOCK ⬙ position and then pull up on the storage bin latch to open the cover . 4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down.
5. Pull rearward on the r elease strap located at the rear of the seat and tumble the seat forward into the storage bin. 6. Close the storage bin cover . CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover .
2. Pull up on the handle to lift the seat out of the storage bin and push the seat rearwar d to latch the seat anchors. 3. Pull upward on the seatback recliner lever , located on the outboard side of the seat, to r eturn the seatback to its full upright position.
T o tilt the seat, pull forward on the r elease strap located on the front of the seat between the seatback and seat cushion and tilt the seat fully forward. T o return the seat to its upright position, push r earward on the seatback until it latches.
• Seats are r emovable W ARNING! When the seatback release handle is lifted, the seat- back will rotate forward. T o avoid injury , if you are not seated in the seat, stay clear from the area in the path of the rotating seatback.
T o swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation. Once the seat begins to r otate, the handle may be released. The seat locks in position once r eaching the forward or r earward positions only .
W ARNING! (Continued) • Make sure the Swivel ’n Go™ seat is in a locked position with the release handle fully engaged. T est the seat after it is locked to see that it doesn’t swivel. Removing Swivel ’n Go™ Premium Seating — If Equipped 1.
5. Lower the release handle located at the bottom front edge of the seat. Each seat weighs about 90 lbs (41 kg). NOTE: Electrical contacts for the available heated seats automatically disengage or engage as the seat is removed or installed. The contacts slide past each other as the seat is rolled to and fr om the strikers.
The table and leg are stor ed beneath the floor when not in use. T o install the table follow these steps: 1. Open the floor storage cover in front of the second row seats. 2. Remove the pole and table top by loosening the hook and loop straps. 3. Swivel the second row seats so they are facing the r ear .
NOTE: Y ou will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top. Apply pressur e on the table top and press downwar d.
2. Pull horizontally on the latch to activate the release from the pole. 3. While pulling on the latch, pull upward to remove the table top from the pole. NOTE: The table top should be removed fr om the leg prior to removing the leg fr om its mounting base.
Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all r ear seats and some front seats. The floor supports the partial weight of the bagged goods. Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor , it is removable for added car go space.
W ARNING! If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstall- ing these seats, be sure the red indicator button on the release handles return into the handles.
The switch is only functional when the liftgate is open and the vehicle is in P ARK. The rear switch bank allows multiple power folding and unfolding positions for the third r ow seats. Left and right third r ow seats can be folded individually or together .
NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints befor e attempting to fold/stow the power third r ow seats. • T o abort seat operation while seat is in motion, press a differ ent seat position selector switch to stop the seat.
T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “1” to unlock the recliner . 3. Pulling strap “3” releases the seatback to return to its full upright position.
W ARNING! T o avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. DRIVER MEMOR Y SEA T — IF EQUIPPED The Memory Buttons 1 and 2 .
Setting Memory Positions and Linking RKE T ransmitter to Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) is pressed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key and turn the ignition switch to the ON position.
to “Electronic V ehicle Information Center (EVIC)/ Customer-Pr ogrammable Features” in “Understanding Y our Instrument Panel” for further information. 12. Repeat the above steps to set the next Memory position using the other numbered Memory button or to link another RKE transmitter to memory .
3. Press and release the memory SET (S) button located on the driver’s door . A chime will sound signaling that you are in the memory set mode. 4. W ithin five seconds, press and r elease MEMOR Y button 1 on the driver’s door . A chime will sound signaling to you that the driver memory has been set.
between 0.9 – 2.7 in (22.7 – 67.7 mm) forward of the rear stop. The seat will r eturn to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.
2. Move to the front of the vehicle and look inside the center of the hood opening. Locate, then push the safety catch lever to the right while raising the hood at the same time. Use the hood prop r od to secure the hood in the open position. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS All of the lights, except the Hazard W arning lights, headlight high beams and flash-to-pass, are contr olled by switches to the left of the steering column on the instru- ment panel.
Dome Light Positions Rotate the dimmer control completely upward to the second detent (extr eme top position) to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. Interior Lighting Defeat (Off) Rotate the dimmer control to the of f position (extreme bottom).
Halo Lights — If Equipped Halo lights are strategically placed soft lighting that help to illuminate specific areas to aid the occupants in locating specific features while driving at night. T o activate the Halo lights, push in the Halo switch control knob.
ignition switch OFF . T o turn the Automatic System of f, turn the headlight switch clockwise to the O (OFF) position. NOTE: The engine must be running befor e the head- lights will come on in the Automatic mode.
When exiting the vehicle the driver can choose to have the headlights remain on for 30, 60 or 90 seconds or not remain on. T o change the timer setting, see your autho- rized dealer . The headlight delay time is programmable on vehicles equipped with an EVIC.
Front Fog Lights — If Equipped T o activate the front fog lights, turn on the parking lights or the low beam headlights and push in the headlight switch control knob. Pr essing the head- light switch control knob in a second time will turn the front fog lights of f.
NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
Flash-T o-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. WINDSHIELD WIPER AND W ASHERS The wipers and washers are operated by a switch within the multifunction lever .
cause the washers to spray for a maximum of 10 seconds, or until the multifunction lever is released, and the wipers will cycle three times. NOTE: • If the multifunction lever is pressed while in th.
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with the defroster before and during windshield washer use.
• The Rain Sensing feature can be turned on and of f through the EVIC (if equipped). Refer to “Electr onic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understand- ing Y our Instrument Panel” for further information.
T o tilt the column, push the lever downward to the unlocked position. Move the steering column up or down, as desired. Pull the lever upwar d to the locked position to lock the steering column firmly in place. W ARNING! Do not adjust the steering column while driving.
Press the button forwar d to move the pedals forward (toward the fr ont of the vehicle). Press the button r earward to move the pedals r earward (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Contr ol Sys- tem is on.
W ARNING! Do not adjust the pedals while the vehicle is moving. Y ou could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h).
T o Activate Push the ON/OFF button (located in the end of the lever) once, and the cruise indicator light (located in the mes- sage window of the odometer) will illuminate, showing that the Electronic Speed Contr ol system is on.
V arying The Speed Setting When the Electronic Speed Contr ol is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established.
W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery .
ParkSense 姞 Sensors The ParkSense 威 sensors, located in the rear fascia/ bumper , monitor the area behind the vehicle that is within the sensors’ field of view .
ParkSense 姞 Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Park Assist ON Park Assist Disabled 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE .
The system will indicate a detected obstacle by showing three solid ar cs and will produce a 1 ⁄ 2 second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change fr om slow , to fast, to continuous.
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. Fast T one Continuous T one 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 175.
The following chart shows the warning display operation when the system is detecting an obstacle: W ARNING DISPLA Y DIST ANCES DISPLA Y MESSAGE OBST ACLE DIST ANCE FROM: ARC’s AUDIBLE SIGNAL REAR CORNERS REAR CENTER Park Assist ON None None W arning Object Detected 78.
Enabling/Disabling ParkSense 姞 Y ou can turn ParkSense 威 ON or OFF through the EVIC. The available choices are: OFF , Sound Only , or Sound and Display . Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Fea- tures)” in “Understanding Y our Instrument Panel” for further information.
ParkSense 姞 System Usage Precautions NOTE: • Ensure that the r ear bumper is free of dirt and debris to keep the ParkSense 威 Rear Park Assist system oper- ating properly . • Jackhammers, large tr ucks, and other vibrations could affect the performance of the ParkSense 威 system.
• Clean the ParkSense 威 sensors regularly , taking care not to scratch or damage them. The sensors must not be covered with ice, snow , slush, mud, dirt, or debris.
W ARNING! • Drivers must be careful when backing up even when using the ParkSense 威 Rear Park Assist sys- tem. Always check carefully behind your vehicle, look behind you, and be sure to check for pedes- trians, animals, other vehicles, obstructions, and blind spots before backing up.
P ARKVIEW 姞 REAR BACK UP CAMERA — IF EQUIPPED Y our vehicle may be equipped with the ParkV iew 威 Rear Back Up Camera that allows you to see an on-screen image of the rear of your vehicle whenever the shift lever is put into REVERSE. The image will be displayed on the Navigation/Multimedia radio display screen.
CAUTION! (Continued) • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew 威 to be able to stop in time when an obstacle is seen. It is recom- mended that the driver look frequently over his/ her shoulder when using ParkV iew 威 .
“check entire surr oundings” displayed across the top of the screen. After five seconds this note will disappear . 5. When the vehicle is shifted out of REVERSE, the rear camera mode is exited and the audio screen appears again. OVERHEAD CONSOLES Front Overhead Console T wo versions of the overhead console ar e available.
Courtesy/Interior Lighting At the forward end of the console ar e two courtesy lights (standard dome light has two buttons). The lights turn on when a front door , a sliding door or the liftgate is opened.
An additional LED at the front of the r ear console shines down on the front foot-well ar ea while in courtesy mode, for added convenience. Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door , a sliding door or the liftgate is opened.
Rear Console Halo Lighting The rear over head console has recessed halo lighting around the perimeter of the console base. This featur e provides additional lighting options while traveling and is controlled by the headlight switch.
W ARNING! • Y our motorized door or gate will open and close while you are training the universal transceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor . It is NOT the button normally used to open and close the door . 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Using HomeLink 威 T o operate, press and r elease the programmed HomeLink 威 button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc.,). The handheld transmitter of the device may also be used at any time.
successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ,” earlier in this section.
2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: • The transmitter has been tested and it complies with FCC and IC rules.
Closing the Sunroof Manually T o close the sunroof fr om an open or vent position, press and hold the switch forward. The sunr oof will close fully and stop automatically . Release the switch to stop sun- roof travel at any point. Sunroof Sunshade Operation The sunroof sunshade can be opened manually .
Express Close Press the switch forwar d and release, and the sunr oof will close automatically from any position. The sunr oof will close fully , then stop automatically . This is called “Express Close”. During Expr ess Close operation, any movement of the sunroof switch will stop the sunr oof.
with the sunroof open, adjust the sunr oof opening to minimize the buffeting or open any window . Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLETS — IF EQUIPPED T wo 12 V olt (13 Amp) power outlets are located on the lower instrument panel, next to the open storage bin.
connected to the battery . Do not exceed a maximum power of 160 W atts (13 Amps) shared between the lower panel outlet and the removable floor console outlet. The outlet in the rear quarter panel near the liftgate and the upper outlet in the instrument panel ar e both con- trolled by the ignition switch.
CAUTION! (Continued) • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the battery even more quickly .
T o avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter . The power inverter switch is located near the center of the instrument panel below the two 12 V olt power outlets. T o turn on the power outlet, press the switch once.
CUPHOLDERS There ar e nine cupholders in the interior . T wo cupholders in the center front instr ument panel, four in the floor consoles and three mor e are located in the thir d row quarter trim panel. All liners are r emovable for cleaning. Pull the flexible liner from the cupholder drawer or tray starting at one edge for easy removal.
Interior Bottle Holders There ar e four bottle holders located in the interior . One bottle holder is molded into each front interior door trim panels, and one bottle holder is molded into each side sliding interior door trim panel. Each holder accommo- dates up to a 20 oz (.
of the two cupholders in the center front instr ument panel. T o install the ash receiver , align the receiver so the thumb grip on the lid is facing rearwar d. Press the ash receiver into either of the cup wells to secur e. Pull upward on the ash r eceiver to remove for cleaning and/or storage.
Lower Glove Compartment T o open the lower compartment pull out on the release handle. NOTE: The lower compartment is equipped with a lock that is part of the compartment handle (2). Door T rim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage.
W ARNING! If containers of hot liquid are place in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury . Driver Seatback Storage — If Equipped The driver’s seatback has a primary storage pocket on all models and an optional secondary mesh pocket.
Umbrella Holder An umbrella holder has been conveniently molded into the left front door entry scuf f molding. Second Row Seat Storage Bins — If Equipped The seat storage bins are located on the floor in fr ont of the second row seats. The ar ea below the covers can be used for storage when the second row seat is in the upright position.
CAUTION! NOTE: The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover . W ARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched.
Storage Bin Safety W arning Carefully follow these warnings to help pr event personal injury or damage to your vehicle: W ARNING! • Always close the storage bin covers when your vehicle is unattended. • Do not allow children to have access to the second row seat storage bins.
Seat Storage Bin Cover Emergency Release Lever As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release is built into the storage bin cover latching mechanism.
Cargo Area Storage The liftgate sill plate has a raised line with the statement “Load T o This Line”. This line indicates how far rearwar d cargo can be placed without interfering with liftgate closing. NOTE: W ith all rear seats stowed or removed ,4x8 foot sheets of building material will fit on the vehicle floor with the liftgate closed.
• The basic console is removable fr om the vehicle for additional floor space by removing the cap and clip at the console base. T o Remove The Basic Floor Console 1. Remove the front anchor cup plug and clip. 2. Slide the console base forward while lifting slightly to clear the rear load floor hook.
• T op tray storage • Upper storage bin can hold nine regular or 18 thin CDs or other items • Large console center storage will stor e headphones for the available rear DVD entertainment system or other items • 12 V olt DC power outlet provides continuous power inside the console for cell phones or other electronics.
holder insert for both cavities can easily be removed for cleaning. The cupholders will also accommodate large size cups and 20 oz (.6 L) bottles. Position 1 shows the console closed with four cupholders and a convenient storage tray . Position 2 shows the raised storage tray revealing a lar ge storage area below .
easy access to the storage area below and pr ovides two of the four cupholders for the second row passengers. Position 4 shows the complete console in its rearmost position. Again, lifting second latch handle at the front of the console, allows complete access to a lower storage bin and provides additional cupholders for r ear passengers.
3. Pull rearwar d to disengage fr om floor and remove console. T o reinstall the console: 1. Position the console at a slight angle (r ear slightly higher than the front). 2. Slide the console forward into the floor bracket. 3. Rotate the rear of the console down until it is resting on the floor bracket.
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and side rails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the r oof rack crossbars.
support and the rear cr ossbar should be fastened at the rearmost position of the side rails. This will help r educe the amount of wind noise when the crossbars ar e not in use. The tie down holes on the crossbar ends should always be used to tie down the load.
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window . Once the screen is completely to the top of the window , extend the top bar of the sun screen over the two hooks attached to the top of the window .
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 2 2 3 䡵 Instrument Cluster – Base ............... 2 2 4 䡵 Instrument Cluster – Pr emium ............ 2 2 5 䡵 Instrument Cluster — Anniversary ...
䡵 Media Center 730N/430 (RER/REN/RBZ) — AM/FM Stereo Radio And CD/DVD/HDD/ NA V — If Equipped .................... 2 5 7 ▫ Operating Instructions — V oice Command System (VR) — If Equipped ............. 2 5 8 ▫ Operating Instructions — Uconnect™ Phone — If Equipped .
䡵 Universal Consumer Interface (UCI) 0.5 — If Equipped .......................... 2 8 3 ▫ Connecting The iPod 威 ................. 2 8 4 ▫ Using This Feature ................... 2 8 4 ▫ Controlling The iPod 威 Using Radio Buttons .........
▫ CD Player ......................... 2 9 6 䡵 CD/DVD Disc Maintenance .............. 2 9 6 䡵 Radio Operation And Cellular Phones ....... 2 9 7 䡵 Climate Controls ...................... 2 9 7 ▫ Manual Heating And Air Conditioning System — If Equipped .
INSTRUMENT P ANEL FEA TURES 1 — Air V ents 5 — Storage Bin 9 — Storage or DVD 13 — Switch Bank 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Cup Holders 14 — Ignition Switch .
INSTRUMENT CLUSTER – BASE 224 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER – PREMIUM 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 225.
INSTRUMENT CLUSTER — ANNIVERSAR Y 226 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Fuel Door Reminder The arrow in this symbol is a r eminder that the Fuel Filler Door is located on the left side of the vehicle.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Y our V ehicle”.
If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer .
W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD).
1 1. Odometer / T rip Odometer — If Equipped The odometer shows the total distance the vehicle has been driven. U.S. Federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
NOTE: • If your vehicle is equipped with a hood switch, in the case of hood ajar , a warning message will be displayed in either the PRNDL/Odometer display as “hood” or “Hood Ajar” in the EVIC display .
damaged, a “noFUSE” message will display in the odom- eter display area. For further information on fuses and fuse locations refer to “Fuses” in “Maintaining Y our V ehicle”. CHAngE OIL Y our vehicle is equipped with an engine oil change indicator system.
14. Electronic Stability Program (ESP) Indicator Light / T raction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, apply as little throttle as possible.
W ARNING! A malfunctioning catalytic converter , as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc.
If the light remains lit with the engine r unning, your vehicle will usually be drivable; however , see an autho- rized dealer for service as soon as possible.
22. Airbag W arning Light This light turns on and remains on for four seconds as a bulb check when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible.
vehicle placard or tir e inflation pressur e label, you should determine the proper tir e inflation pressur e for those tires.) As an added safety feature, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated.
tires or wheels on your vehicle, to ensur e that the replacement or alternate tir es and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle.
W ARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in acci- dent.
COMP ASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: • The compass on your vehicle is self-calibrating, elimi- nating the need to manually calibrate the compass.
When the appropriate conditions exist, the following messages will display: NE .............. Eight-point compass headings are display ed (N, S, E, W , NE, NW , SE, SW) 14°F ............ T emperatur e (Fahr enheit or Celsius) AV G ......... A v e r a g e Fuel Econom y (U.
Compass/T emperature Display Compass V ariance Compass V ariance is the differ ence between Magnetic North and Geographic North. T o ensure compass accu- racy , the compass variance should be properly set accord- ing to the variance map for the zone where the vehicle will be driven.
T o Set the V ariance Start the engine and leave the transmission gear selector lever in the P ARK position. Press and hold the CMTC reset button (for appr oximately ten seconds) until the current variance zone number is displayed. T o change the zone, press and r elease the CMTC reset button to incr ease the variance one step.
This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the following: • System Status displ.
Press and r elease the MENU button, and the mode displayed will change between Compass/T emperature, T rip, System Status, and Personal Settings. Press the STEP button to scroll through sub menus (i.e., T rip Functions, A vg. Fuel Economy , DTE, Elapsed T ime, and Units).
• LOW W ASHER FLUID • Oil Change Required • Left Front T urn Signal Light Out • Left Rear T urn Signal Light Out • Right Front T urn Signal Light Out • Right Rear T urn Signal Light Out .
after a single chime has sounded, to indicate the next scheduled oil change interval. The engine oil change indicator system is duty-cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.
Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level.
Compass Display / ECO (Fuel Saver Mode) — If Equipped The compass readings indicate the dir ection the vehicle is facing. Press and r elease the compass button to display one of eight compass readings, and the outside tempera- ture.
2. Press the MENU button until Personal Settings (Customer-Pr ogrammable Features) menu is r eached. 3. Press the STEP button until “Calibrate Compass” is displayed in the EVIC. 4. Press and release the RESET button to start the cali- bration. The “CAL” indicator will be displayed in the EVIC.
NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Cell Phones, Lap- tops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor , and it may give false readings.
Use the Step button to display one of the following choices. Language When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped).
RKE Linked T o Memory When this feature is selected the memory seat, mirr or , and radio settings will return to the memory set position when the RKE transmitter UNLOCK button is pressed. If this feature is not selected then the memory seat, mirr or , and radio settings can only return to the memory set position using the door mounted switch.
T ilt MIRR. In Reverse When this feature is selected and the vehicle is placed in a reverse gear , the driver’s side mirror will tilt downwar d to allow the driver to see into the previous blind spot and avoid objects in close proximity to the r ear of the vehicle.
NOTE: If your vehicle has experienced any damage in the area wher e the sensor is located, even if the fascia is not damaged, the sensor may have become misaligned. T ake your vehicle to an authorized dealer to verify sensor alignment. Having a sensor that is misaligned will result in the BSM not operating to specification.
T urn Headlights On with Remote Key Unlock When this feature is selected, the headlights will activate, and remain on for up to 90 seconds, when the doors ar e unlocked with the RKE transmitter . T o make your selec- tion, press and r elease the RESET button until OFF , 30 sec.
The RER radio also contains a Global Positioning System (GPS)-based Navigation system. Refer to your Uconnect™ Multimedia REN, RER or RBZ user’s manual for detailed operating instructions.
Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen.
want to select, touch the screen wher e the word “Page” is displayed to view additional time zones in the menu. 5. T ouch the screen wher e the word “Save” is displayed.
Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen.
Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen. 4. T ouch the screen wher e the words “Set T ime Zone” are displayed.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
4. Adjust the minutes using the right side TUNE/ SCROLL contr ol knob. Press the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob, or wait five seconds. R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows.
Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button.
Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
Press the RND button a second time to stop Random Play . Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions.
Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio.
to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it.
3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL contr ol knob. Press the TUNE/SCROLL control knob to save time change.
Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display .
Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Persona.
SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes.
Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode.
CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player .
AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace.
• Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display .
MPEG Specification Sampling Fre- quency (kHz) Bit Rate (kbps) MPEG-1 Au- dio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Au- dio Layer 3 24, 22.
begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files). The folder list will time out after five seconds.
Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
• Connecting an iPod 威 to the AUX port located in the radio faceplate, plays media, but does not use the UCI feature to contr ol the connected device. Connecting The iPod 姞 Use the provided connection cable to connect an iPod 威 to the vehicle’s 16–pin connector port (which is located in the glove compartment on some vehicles).
Controlling The iPod 姞 Using Radio Buttons T o get into the UCI (iPod 威 ) mode and access a connected iPod 威 , press the “AUX” button on the radio faceplate. Once in the UCI (iPod 威 ) mode, iPod 威 audio tracks (if available from iPod 威 ) start playing over the vehicle’s audio system.
beginning of the track. Pressing the SEEK >> button during play mode, it will jump to the next track in the list. • While a track is playing, press the INFO button to see the associated metadata (artist, track title, album, etc.) for that track.
the track detail on the radio display . Once the track to be played is highlighted on the radio display , press the TUNE contr ol knob to select and start playing the track. T urning the TUNE control knob fast will scroll thr ough the list faster . During fast scroll, a slight delay in updating the information on the radio display may be noticed.
• MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your iPod 威 . CAUTION! • Leaving the iPod 威 (or any supported device) any- where in the vehicle in extreme heat or cold can alter the operation or damage the device.
information, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www- .siriuscanada.ca for Canadian residents. Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1.
bikes should be placed as far rearwar d as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle.
INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able). Also, pr essing and holding the INFO button for an additional three seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display).
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
Uconnect™ Multimedia (SIRIUS BACKSEA T TV™) — IF EQUIPPED Satellite video uses direct satellite r eceiver broadcasting technology to provide str eaming video.
• V ideo and audio input jacks available in rear seating area • T en differ ent medias to choose from in each scr een (AM, FM, Sirius Radio, Sirius Backseat TV™, DVD1, DVD2, Hard Disc Drive (HDD), AUX in radio, AUX1, AUX2) The LCD screen(s) ar e located in the overhead compart- ment console.
NOTE: Refer to the “Uconnect™ Multimedia” section of Uconnect™ User Manual located on the DVD for further details. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel, at the three and nine o’clock positions.
The right-hand rocker switch has a pushbutton in the center , and controls the volume and mode of the sound system. Pressing the top of the r ocker switch will increase the volume.
2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or anti-static sprays. 5. Store the disc in its case after playing.
Manual Heating and Air Conditioning System — If Equipped The controls for the manual system in this vehicle contain a series of outer rotary dials and inner push knobs. These comfort controls can be set to obtain desir ed interior conditions. Front Blower Control There ar e four blower speeds.
T emperature Control Use this control to r egulate the tem- perature of the air inside the passenger compartment. Rotating the knob coun- terclockwise, fr om top center into the blue area indicates cooler tempera- tures. Rotating the knob clockwise, into the red ar ea, indicates warmer temperatures.
Bi-Level Mode Air is directed thr ough the panel and floor outlets. NOTE: There is a dif ference in temperatur e (in any conditions other than full cold or full hot), between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets.
NOTE: • If the RECIRCULA TION button is pressed when the system is in MIX, DEFROST , or FLOOR mode the RECIRCULA TION LED indicator will flash 3 times to indicate RECIRCULA TION mode is not allowed. • Continuous use of the RECIRCULA TION mode may make the inside air stuffy and window fogging may occur .
NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. Max A/C For maximum cooling use the A/C and RECIRCULA- TION mode buttons at the same time.
The Three-Zone T emperature Control bottom panel con- trols r ear Heating, V entilation, and Air Conditioning operations. The primary control for the r ear blower is on the front climate control unit located on the instr ument panel. When the front contr ol is in any position other than rear , the front contr ol operates all the rear functions.
NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left in the “O” (Of f) position.
Only when the front contr ol for the rear blower is in the RR position do the second row seat occupants have control of the r ear blower speed. The rear blower contr ol, located in the rear over head console, has an off position and a range of blower speeds.
Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the BI-LEVEL mode is designed to provide cooler air out of the head- liner outlets and warmer air from the floor outlets. Floor Mode Air comes from the floor outlets.
Front Upper A TC Panel 1 - System On/Off 9 - Air Conditioning (A/C) On/ Off 2 - Blower Indicator 10 - AUTO Mode / Blower 3 - Left Front T emperature 1 1 - Front MODE 4 - Rear Blower / T emperature / M.
Automatic Operation 1. Press the AUTO button on the Fr ont Upper A TC Panel and the word AUTO will illuminate in the fr ont A TC display , along with three temperatures for driver , front passenger , and rear seats. The system will then automati- cally regulate the amount of airflow .
Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the front A TC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other .
Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions.
Recirculation Control When outside air contains smoke, odors, or high humidity , or if rapid cooling is desired, you may wish to recir culate interior air by pressing the RECIRCULA TION mode control button. RECIRCULA TION mode should only be used temporarily .
The Rear A TC System is located in the headliner , near the center of the vehicle. 1. Press the REAR LOCK button on the front lower A TC panel. This turns off the REAR LOCK icon in the r ear temperature knob. 2. Rotate the Rear Blower , Rear T emperature and the Rear Mode Control knobs to suit your comfort needs.
NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to pr ovide comfort as quickly as possible. • The temperature can be displayed in English or Metric units by selecting the “Display Units of Measure in” customer-pr ogrammable feature.
Rear Mode Control Auto Mode The rear system automatically maintains the corr ect mode and comfort level desired by the r ear seat occu- pants. Headliner Mode Air comes from the outlets in the headliner . Each of these outlets can be individually adjusted to direct the flow of air .
Winter Operation T o ensure the best possible heater and defr oster perfor- mance, make sure the engine cooling system is function- ing properly and the pr oper amount, type, and concen- tration of coolant is used. Refer to “Maintenance Procedur es” in “Maintaining Y our V ehicle” for proper coolant selection.
Operating Tips A/C Air Filter— If Equipped On vehicles equipped with Automatic T emperature Con- trol (A TC), the climate control system filters out dust and pollen from the air . Refer to “Air Conditioning” in “Maintaining Y our V ehicle” for filter replacement instructions.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 3 2 1 ▫ Automatic T ransmission ............... 3 2 1 ▫ Normal Starting ..................... 3 2 1 ▫ Extreme Cold W eather (Below ⫺ 20°F Or –29°C) ...........
䡵 Driving Through W ater ................. 3 3 3 ▫ Flowing/Rising W ater ................. 3 3 3 ▫ Shallow Standing W ater ............... 3 3 3 䡵 Power Steering ....................... 3 3 5 ▫ Power Steering Fluid Check ............. 3 3 5 䡵 Parking Brake .
▫ Life Of T ire ........................ 3 6 1 ▫ Replacement T ires .................... 3 6 1 䡵 Snow T ires .......................... 3 6 3 䡵 T ire Rotation Recommendations ........... 3 6 3 䡵 T ire Pressur e Monitor System (TPMS) ....... 3 6 4 ▫ Base System .
▫ Maintenance ........................ 3 8 1 䡵 Adding Fuel ......................... 3 8 1 ▫ Fuel Filler Cap (Gas Cap) .............. 3 8 1 ▫ Loose Fuel Filler Cap Message ........... 3 8 3 䡵 V ehicle Loading ...................... 3 8 3 ▫ V ehicle Certification Label .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave unattended children alone in a vehicle.
Extreme Cold Weather (Below ⫺ 20°F or –29°C) Follow the same instructions in the “Normal Starting” procedur e. T o ensure r eliable starting at these temperatures, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is r ecommended.
CAUTION! T o prevent damage to the starter , DO NOT crank the engine for more than 15–second intervals at one time. W ait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key fob is released.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Move the shift lever into P ARK only after the vehicle has come to a complete stop. • Do not move the shift lever from REVERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed.
Brake/T ransmission Interlock System This vehicle is equipped with a Brake T ransmission Shift Interlock System (BTSI) that holds the shift lever in the P ARK position when the ignition switch is in the LOCK position.
The electronically-contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating; therefor e, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK. As an added precaution, turn the fr ont wheels toward the curb on a downhill grade, and away from the curb on an uphill grade.
W ARNING! (Continued) • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key fob in the ignition switch.
NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast down a hill.
CAUTION! If the transmission operating temperature exceeds acceptable limits, the vehicle computer will override DRIVE and select “5” range (on six-speed transmis- sions) or “3” range (on four-speed transmissions) by changing shift points. This is done to prevent trans- mission damage due to overheating.
Odometer Screen Display 123456 D Actual Gear(s) Allowed (Six- Speed T ransmis- sion) 1 1-2 1-3 1-4 1-5 1-6 1-6 Actual Gear(s) Allowed (Four- Speed T ransmis- sion) 1 1-2 1-3 1-4 N / A N / A 1–4 NOTE: T o select the proper gear position for maximum deceleration (engine braking), simply press and hold the shift lever to the left (-).
If the transmission cannot be reset, authorized dealer service is requir ed. DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left.
DRIVING THROUGH W A TER Driving through water mor e than a few inches/ centimeters deep will requir e extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
CAUTION! (Continued) • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water .
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle.
checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components.
When the parking brake is applied with the ignition switch in the ON position, the “Brake W arning Light” in the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the automatic transmission is placed in gear , the “Brake W arning Light” will flash.
W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. • Do not leave the key fob in the ignition switch. A child could operate power windows, other con- trols, or move the vehicle.
Y ou may experience the following when the brake system goes into anti-lock: • The ABS motor running (it may continue to run for a short time after the stop) • A clicking sound of solenoid valves .
W ARNING! (Continued) • The Anti-Lock Brake System cannot prevent acci- dents, including those resulting from excessive speed in turns, following another vehicle too closely , or hydroplaning. Only a safe, attentive, and skillful driver can prevent accidents.
If both the “Brake W arning Light” and the “Anti-Lock Brake W arning Light” remain on, the ABS and Electronic Brake Force Distribution (EBD) systems ar e not function- ing. Immediate repair to the ABS system is required. Consult with your authorized dealer service center as soon as possible.
W ARNING! • The TCS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase the traction afforded. • The TCS cannot prevent accidents, including those resulting from excessive speed in turns, or hydro- planing.
W ARNING! (Continued) • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplan- ing.
ESP Partial Of f This mode is entered by momentarily pr essing the “ESP OFF” switch (located in the center switch bank, next to the hazard flasher switch).
kilometers at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corr ected. NOTE: • The “ESP/TCS Indicator Light” and the “ESP/BAS W arning Light” come on momentarily , each time the ignition switch is turned ON.
NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard T ire Placard L.
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es.
2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and pas- sengers from XXX lbs or XXX kg. 4. The resulting figure equals the available amount of cargo and luggage load capacity .
354 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
is defined as the tire pr essure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour period. The cold tir e inflation pressur e must not exceed the maximum infla- tion pressur e molded into the tire sidewall.
W ARNING! High-speed driving, with your vehicle at or above maximum load, is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
W ARNING! (Continued) • T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • Be sure to follow the warnings that apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
W ARNING! • Fast spinning tires can be dangerous. Forces gen- erated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone.
Life of Tire The service life of a tire is dependent upon varying factors, including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! The tires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
SNOW TIRES Some areas of the country r equire the use of snow tir es during W inter . Standard tires ar e of the all-season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tir es equivalent in size and type to the original equipment tires.
The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pr essure based on the cold inflation tire pr essure r equirements found on the tire placar d located on the driver’s-side B-pillar .
The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tir e pressur e is at or above recommended cold tire placar d pressur e.
CAUTION! (Continued) • After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the TPMS sensor . NOTE: • The TPMS is not intended to replace normal tir e care and maintenance, or to provide warning of a tir e failure or condition.
The Basic TPMS consists of the following components: • Receiver Module • Four T ire Pressur e Monitoring Sensors • TPMS T elltale W arning Light T ire Pressure Monitoring Low T ire Pressure W ar.
3. Accumulation of excessive snow and/or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPMS sensors. V ehicles with Compact Spare 1. The compact spare tire (if equipped) does not have a TPMS sensor .
NOTE: It is particularly important to regularly check and maintain proper tir e pressur e in all the tires. The Premium TPMS consists of the following compo- nents: • Receiver Module • Four TPMS S.
Should a low tire condition occur on any of the four active road tir e(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tir e pressur e value.
will not be present, and a pr essure value will be dis- played instead of dashes. A system fault can occur by any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors.
5. Once you repair or replace the original r oad tire, and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically .
4.0L Engine The 4.0L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high-quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer r ecommends the use of 89 octane for optimum performance.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in some ar eas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle.
• disconnect and reconnect the battery to r eset the engine controller memory More extensive r epairs will be requir ed for prolonged exposure to E85 fuel. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane.
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . • T o prevent carbon monoxide poisoning DO NOT inhale exhaust gases.
the other sections of this manual for information on features that ar e common between Flexible Fuel and gasoline only powered vehicles. CAUTION! Only vehicles with the E85 fuel filler door label can operate on E85.
Ethanol Fuel (E85) E85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
• Some additives used in regular gasoline ar e not fully compatible with E85 and may form deposits in your engine. T o eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOP AR 威 Injector Cleanup or T echron may be used.
Replacement Parts Many components in your Flexible Fuel V ehicle (FFV) are designed to be compatible with ethanol. Always be sur e that your vehicle is serviced with correct ethanol com- patible parts. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door . CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap).
• If the gas cap is not tightened properly , the MIL may come on. Be sure the gas cap is tightened every time the vehicle is refueled. Loose Fuel Filler Cap Message If the vehicle diagnostic system .
• V ehicle Identification Number (VIN) • T ype of V ehicle • Month, Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the V ehicle Identification Number (VIN). Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle.
CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GA WR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control. Also, overloading can shorten the life of your vehicle.
LOADING T ABLE — EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2,140 lbs (971 kg) 1,470 lbs (667 kg) Load (Driver , passengers, and cargo/luggage) 360 lbs (163 kg) 980 lbs (445 kg) TOT AL 2,500 lbs (1 134 kg) 2,450 lbs (1 1 1 1 kg) GA WR 2,544 lbs (1 154 kg) 2,544 lbs (1 154 kg) A loaded vehicle is shown in the above table.
that you do not exceed the GVWR. Refer to “V ehicle Loading/V ehicle Certification Label” in “Starting and Operating” for further information. Gross T railer W eight (GTW) The GTW is the weigh.
Frontal Area The frontal ar ea is the maximum height multiplied by the maximum width of the front of a trailer . T railer Sway Control The trailer sway control is a telescoping link that can be instal.
W ARNING! • An improperly adjusted weight-distributing hitch system may reduce handling, stability , braking performance, and could result in an accident.
W ith W eight-Distributing Hitch (Correct) Improper Adjustment of W eight-Distributing Hitch (Incorrect) 5 ST ARTING AND OPERA TING 391.
T railer Hitch Classification Y our vehicle may be factory-equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer T owing W eights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmis- sion GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
Engine/ T ransmis- sion GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.8L and 4.0L/ Automatic (with T ow Package) 9,000 lbs (4 082 kg) 40 sq ft (3.72 sq m) Up to 2 persons & Luggage 3,800 lbs (1 723 kg)* 380 lbs (172 kg) 9,000 lbs (4 082 kg) 40 sq ft (3.
T railer and T railer T ongue W eight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! (Continued) • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident.
W ARNING! (Continued) 4. T railer tongue weight rating for that trailer hitch. (This requirement may limit the ability to always achieve the 10% to 15% range of trailer tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires • Do not attempt to tow a trailer while using a compact spare tir e.
• An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired.
T owing Requirements – T railer Lights and W iring Whenever you pull a trailer , regar dless of the trailer size, stop lights and turn signals on the trailer are r equired for motoring safety . The T railer T ow Package may include a four-pin or a seven-pin wiring harness.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. Automatic T ransmission The DRIVE gear can be selected when towing.
NOTE: Moving the shift lever into third gear (with four-speed transmission) or fifth gear (with six-speed transmission) while operating the vehicle under heavy operating conditions will improve performance and ex- tend transmission life by reducing excessive shifting and heat build up.
Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: • City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL but do not increase engine idle speed. • Highway Driving Reduce speed.
.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 4 0 6 䡵 If Y our Engine Overheats ................ 4 0 6 䡵 Jacking And T ire Changing ............... 4 0 7 ▫ Jack Location ....................... 4 0 8 ▫ Spare T ire Removal .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the center of the instrument panel above the radio. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency .
• Y ou can also turn the temperature contr ol to maximum heat, the mode control to floor and the blower contr ol to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle.
W ARNING! (Continued) • The jack is designed to use as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes.
Spare Tire Removal The spare tir e is stowed inside a protective cover located under the center of the vehicle between the front doors by means of a cable winch mechanism. The “spare tir e drive” nut is located on the floor , under a plastic cap at the front of the floor console.
Preparations For Jacking 1. Park the vehicle on a firm, level surface. A void ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid being hit when operating the jack or changing the wheel.
W ARNING! (Continued) • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in P ARK; a manual transmission in REVERSE. • Never start or run the engine with the vehicle on a jack.
1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. T o remove the compact spar e tire/cover assembly , assemble the winch handle extensions to form a “T” and fit the winch “T” handle over the drive nut, refer to “2” configuration in tool graphics.
CAUTION! The winch mechanism is designed for use with the winch “T” handle only . Use of an air wrench or other power tools is not recommended and can damage the winch.
W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
5. There are two jack engagement locations on each side of the vehicle body . These locations are on the sill flange of the vehicle body . NOTE: • Rear jack locations are between a pair of down-facing tabs on the sill flange of the vehicle side body .
Jack Location 416 WHA T TO DO IN EMERGENCIES.
CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 5. 6. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged.
10. Lower the vehicle by turning the jack screw to the left. 1 1. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. The correct wheel nut tightness is 95 ft lbs (130 N·m).
Wheel Nuts All wheel nuts should be tightened occasionally , to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated. This is especially important during the first few hundred miles of operation, and after each time a tire is changed, to allow the wheel nuts to become properly set.
2. Assemble the winch handle extensions to form the spare tir e hook, and pull the wheel spacer from under the vehicle. 3. T urn the compact spare tir e so that the valve stem is down, and place the tire into the spar e tire/cover assem- bly .
CAUTION! The winch mechanism is designed specifically to stow a compact spare tire only . Do not attempt to use the winch to stow the full size flat tire, or any other full-size tire.
Preparations for Jump-Start The battery in your vehicle is located on the left side of the engine compartment. W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades.
3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury .
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then move the shift lever back and forth between REVERSE and DRIVE.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone.
CAUTION! (Continued) • Always use wheel lift equipment when towing from the front. The only other approved method of towing is with a flatbed truck. • Do not tow the vehicle from the rear . Damage to the rear sheet metal, liftgate and fascia will occur .
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.3/3.8L .......... 4 3 1 䡵 Engine Compartment — 4.0L ............. 4 3 2 䡵 Onboard Diagnostic System — OBD II ...... 4 3 3 ▫ Loose Fuel Filler Cap Message ........... 4 3 3 䡵 Emissions Inspection And Maintenance Programs .
▫ Cooling System ..................... 4 4 9 ▫ Brakes ............................ 4 5 4 ▫ Automatic T ransmission ............... 4 5 6 ▫ Appearance Care And Protection From Corrosion .......................... 4 5 9 ▫ Cleaning The Instrument Panel Cupholders .
ENGINE COMP ARTMENT — 3.3/3.8L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic T ransmission Dipstick (3.3L Only) 8 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 9 — Coolant P.
ENGINE COMP ARTMENT — 4.0L 1 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 2 — Air Cleaner Filter 8 — Engine Oil Fill 3 — Brake Fluid Reservoir 9 — Coolant Pressur e Cap 4 —.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
“Electronic V ehicle Information Center (EVIC)” in ”Un- derstanding Y our Instrument Panel” for further informa- tion. T ighten the gas cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tight- ened.
2. If you crank or start the engine, you will have to start this test over . 3. As soon as you turn the ignition switch to the ON position, you will see the MIL symbol come on as part of a normal bulb check. 4. Approximately 15 seconds later , one of two things will happen: a.
REPLACEMENT P ARTS Use of genuine MOP AR 威 parts for normal/scheduled maintenance and repairs is highly r ecommended to en- sure the designed performance. Damage or failur es caused by the use of non-MOP AR 威 parts for maintenance and repairs will not be cover ed by the manufacturer’s warranty .
CAUTION! • Failure to properly maintain your vehicle or per- form repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle perfor- mance. Immediately have potential malfunctions examined by an authorized Chrysler Group LLC dealership or qualified repair center .
CAUTION! Overfilling or underfilling will cause oil aeration, or loss of oil pressure. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information.
Engine Oil V iscosity (SAE Grade) – 3.3L & 3.8L Gasoline Engines SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . Y our engine oil filler cap also shows the recommended engine oil viscosity for your vehicle.
Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment.
used to assure most ef ficient service. MOP AR 威 engine air cleaner filters are a high quality filter and ar e recommended. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions con- trol device and may seriously reduce engine per- formance and cause serious damage to the engine.
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interr upt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle.
CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedur e to re- place the filter: 1. Open the glove compartment and remove all contents. 2. Push in on the sides of the glove compartment and lower the door .
CAUTION! The A/C air filter is labeled with an arrow to indicate airflow direction through the filter . Failure to prop- erly install the filter will result in the need to replace it more often. 7. Rotate the glove compartment door back into position.
A void using the wiper blades to remove fr ost or ice from the windshield. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and fr equency of use.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position.
Cooling System – Drain, Flush and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals. This engine coolant (antifreeze) can be used up to five years or 102,000 miles (170 000 km) before r eplace- ment.
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated.
engine coolant (antifreeze) fr eeze point or replacing the engine coolant (antifreeze). Advise your service atten- dant of this. As long as the engine operating temperature is satisfactory , the coolant bottle only needs to be checked once a month.
• Make sure that the radiator and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, also keep the front of the condenser clean. • Do not change the thermostat for Summer or W inter operation.
Add enough fluid to bring the level up to the requir e- ments described on the brake fluid reservoir . W ith disc brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed.
W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic T ransmission The automatic transmission and differ ential assembly are contained within a single housing.
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than the manufacturer’s recommended fluid will result in more frequent fluid and filter changes.
6. W ipe the dipstick clean and reinsert until seated. Remove the dipstick and note reading. a. If the fluid is hot, the r eading should be in the crosshatched ar ea marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD”.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty .
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or equiva- lent, or a mild car wash soap, and rinse the panels completely with clear water .
• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
• For tough stains, apply MOP AR 威 T otal Clean or equivalent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fr esh, damp towel to remove soap r esidue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or a equivalent high quality cleaner to a clean, damp cloth and remove the stain.
solvents, detergents, or ammonia-based cleaners to clean your leather upholstery . Application of a leather condi- tioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer . FUSES T otally Integrated Power Module (TIPM) The T otally Integrated Power Module (TIPM) is located in the engine compartment near the battery .
CAUTION! • When installing the T otally Integrated Power Module cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description J8 40 Amp Green — Power Memory Seat – If Equipped J9 40 Amp Green — Partial Zer o Emis- sions V ehicle Motor/Flex Fuel J10 30 Amp Pink — .
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M1 — 15 Amp Blue Rear Center Brake Lamp/Brake Switch M 2 ——— M3 — 20 Amp Y ellow Spare Fuse M4 — 10 Amp Red T railer T ow M5 — 25 A.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M12 — 30 Amp Green Amplifier (AMP)/ Radio M13 — 20 Amp Y ellow Ignition Off Draw— Instrument Cluster , SIREN, Clock Module, Multi-Function .
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M18 — 15 Amp Blue Right T ail/Park/ Run Lamp M19 — 25 Amp Natural Automatic Shut- down #1 and #2 M20 — 15 Amp Blue Instrument Cluster Inter.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M28 — 10 Amp Red Powertrain Control Module, T ransmis- sion Feed, T rans- mission Control Module M29 — 10 Amp Red Occupant Classifi- cation M.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M35 — 10 Amp Red Heated Mirrors M36 — 20 Amp Y ellow Power Outlet #3 M37 — 10 Amp Red Antilock Brakes, Stability Control System, Stop Lamp .
• Anytime you store your vehicle, or keep it out of service for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of com- pressor damage when the system is started again.
BULB REPLACEMENT Headlamps 1. Raise the hood to access the rear of the headlamp housing. 2. Slide the red lock tab rearwar d on the connector , then depress the tab and r emove the connector from the bulb. 3. T wist the headlamp bulb and pull the bulb from the headlamp housing.
1. From behind the bumper fascia, or the access panel on the air dam, twist the bulb counterclockwise, and r emove bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
NOTE: • If a screwdriver is used, make sur e a soft material is placed between the vehicle body and tool so not to scratch the paint. • The PR Y location is best closest to the studs while dislodging them separately . 3. T wist the socket and remove fr om the lamp assembly .
2. T wist and remove the socket fr om the lamp assembly and pull the bulb out to remove. 3. Push the bulb into the socket, twist the socket into the lamp assembly and reinstall the lamp assembly into place ensuring the locking tab is secure. FLUID CAP ACITIES U.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant Five Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. Engine Oil – 3.3L and 3.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Brake Master Cylinder MOP AR 威 DOT 3 and SAE J1703 should be used or equivalent.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 8 2 䡵 Maintenance Schedule .................. 4 8 2 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
Once A Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , the brake master cylinder , the power steering and the transmission and add as needed.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the ignition cables (3.3L and 3.8L engines). ❏ Replace the spark plugs (3.3L, 3.8L, and 4.0L engines).
1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
150,000 Miles (250,000 km) or 150 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
† This maintenance is recommended by the manufac- turer , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 5 0 1 ▫ Prepar e For The Appointment ........... 5 0 1 ▫ Prepar e A List ...................... 5 0 1 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ir e Quality Grades ........................ 5 0 7 ▫ T readwear ......................... 5 0 7 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
• Service Manuals These comprehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Gr oup LLC vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
Adding Engine Coolant (Antifreeze) .......... 4 5 1 Adding Fuel ........................... 3 8 1 Adding W asher Fluid ..................... 4 4 8 Additives, Fuel ......................... 3 7 5 Adjustable Pedals ....................... 1 6 6 Air Cleaner , Engine (Engine Air Cleaner Filter) .
Automatic T ransaxle ...................... 3 2 4 Adding Fluid ......................... 4 5 8 Fluid Level Check ..................... 4 5 8 Interlock System ....................... 3 2 5 Selection Of Lubricant ................ 456,479 Shifting ......
Caps, Filler Fuel ............................... 3 8 1 Oil (Engine) .......................... 4 3 9 Power Steering ........................ 3 3 5 Radiator (Coolant Pressur e) ............... 4 5 1 Car W ashes ............................ 4 6 0 Carbon Monoxide W arning .
Connector U C I ................................ 2 8 3 Universal Consumer Interface (UCI) ......... 2 8 3 Console .............................. 2 0 8 Console, Floor .......................... 2 0 8 Console, Overhead ....................... 1 8 3 Console, Removable .
Disposal Antifreeze (Engine Coolant) ............... 4 5 2 Engine Oil ........................... 4 4 0 Domelight ............................. 1 5 6 Door Locks ............................. 3 0 Door Locks, Automatic .................... 3 3 Door Opener , Garage .
Flooded, Starting ...................... 3 2 2 Fuel Requirements .................. 372,477 O i l ........................... 437,477,478 Oil Change Interval .................... 4 3 8 Oil Disposal .......................... 4 4 0 Oil Filler Cap .....
Flooded Engine Starting ................... 3 2 2 Floor Console .......................... 2 0 8 Fluid Capacities ......................... 4 7 7 Fluid Leaks ............................ 1 0 4 Fluid Level Checks Automatic T ransaxle ..................
Gauges Coolant T emperature ................... 2 2 7 Fuel ............................... 2 2 7 Speedometer ......................... 2 2 8 T achometer .......................... 2 3 0 Gearshift .............................. 3 2 6 General Information .
Ignition ............................... 1 3 K e y ............................... 12,13 Ignition Key Removal ..................... 1 3 Illuminated Entry ........................ 1 8 Immobilizer (Sentry Key) ................... 1 4 Infant Restraint ..
Light Bulbs ............................ 1 0 4 Lights ............................. 104,155 Airbag ....................... 76,81,102,237 Alarm .............................. 2 3 6 Anti-Lock ........................... 2 2 8 Automatic Headlights ......
Service Engine Soon (Malfunction Indicator) . . . 234 Side Marker .......................... 4 7 5 Theft Alarm (Security Alarm) .............. 2 3 6 T ire Pressur e Monitoring (TPMS) ........... 2 3 7 T urn Signal ..................... 104,474,475 V oltage .
Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 3 6 4 Mopar Parts ......................... 436,504 Multi-Function Control Lever ............... 1 6 0 Navigation System (Uuconnect 威 gps) .........
Personal Settings ........................ 2 5 2 Pets, T ransporting ........................ 9 5 Phone, Cellular ......................... 1 2 2 Phone, Hands-Free (Uconnect™) ............. 1 2 2 Placard, T ire and Loading Information ......... 3 5 1 Power Door Locks .
Remote Keyless Entry (RKE) ................. 1 9 Remote Sound System (Radio) Controls ........ 2 9 5 Remote Starting System .................... 2 7 Removable Floor Console .................. 2 1 2 Replacement Keys ........................ 1 5 Replacement Parts .
Seats ................................. 1 2 3 Adjustment .......................... 1 2 4 Easy Entry ........................... 1 3 5 Fold in Floor (Stow ⬘ n G o ) ............... 1 3 2 Heated ............................. 1 2 8 Lumbar Support ....
Remote .............................. 2 7 Starting and Operating .................... 3 2 1 Starting Procedur es ...................... 3 2 1 Steering Power .............................. 3 3 5 T ilt Column .......................... 1 6 5 Steering Wheel Mounted Sound System Controls .
Life of T ires .......................... 3 6 1 Load Capacity ..................... 351,352 Pressur e Monitor System (TPMS) ........... 3 6 4 Pressur e W arning Light .................. 2 3 7 Quality Grading ....................... 5 0 7 Radial ......
T ransmitter Battery Service (Remote Keyless Entry) .................... 2 6 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 186 T ransmitter , Remote Keyless Entry (RKE) ........ 1 9 T ransporting Pets ........................ 9 5 T read W ear Indicators .
W ater Driving Through ...................... 3 3 3 Wheel and Wheel T rim .................... 4 6 1 Wheel and Wheel T rim Care ................ 4 6 1 Wheel Nut T orque ....................... 4 1 9 W ind Buffeting ....................... 41,194 W indow Fogging .
Chrysler Group LL C 1 0Y532-126-AC 3rd Edition Printed in U.S.A..
Ein wichtiger Punkt beim Kauf des Geräts Dodge 2010 Grand Caravan (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dodge 2010 Grand Caravan noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dodge 2010 Grand Caravan - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dodge 2010 Grand Caravan reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dodge 2010 Grand Caravan erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dodge 2010 Grand Caravan besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dodge 2010 Grand Caravan verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dodge 2010 Grand Caravan. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dodge 2010 Grand Caravan gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
