Benutzeranleitung / Produktwartung 2009 KA Nitro des Produzenten Dodge
Zur Seite of 459
2009 NITRO NITRO Chrysler LL C 81-326-0913 First Edition Printed in U.S.A. OWNER ’S MANU AL 2009.
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution there- fore. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 Rollover W arning ........................ 4 䡵 How T o Use This Manual .................. 5 䡵 W arnings And Cautions ................... 7 䡵 V ehicle Identification Number .
INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents.
Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually .
6 INTRODUCTION.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Key-In-Ignition Reminder ................ 1 3 䡵 Sentry Key 威 ........................... 1 4 ▫ Replacement Keys .
▫ Battery Replacement ................... 2 3 ▫ General Information .................... 2 4 䡵 Remote Starting System — If Equipped ....... 2 5 䡵 Door Locks ........................... 2 6 ▫ Manual Door Locks .................... 2 7 ▫ Power Door Locks .
䡵 Engine Break-In Recommendations .......... 7 5 䡵 Safety T ips ............................ 7 6 ▫ Exhaust Gas ......................... 7 6 ▫ Safety Checks Y ou Should Make Inside The V ehicle ............................. 7 6 ▫ Safety Checks Y ou Should Make Outside The V ehicle .
A WORD ABOUT YOUR KEYS The keys for your vehicle are double-sided. Y ou can insert the keys into the locks with either side up. The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number .
W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
NOTE: The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position. SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated.
NOTE: • The Sentry Key 威 Immobilizer System is not compat- ible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security pr otection.
procedur e. This procedure consists of pr ogramming a blank key to the vehicle electronics. A blank key is one that has never been programmed. NOTE: When having the Sentry Key 威 Immobilizer System serviced, bring all vehicle keys with you to an authorized dealer .
Repeat this procedur e to program up to eight keys. If you do not have a programmed Sentry Key 威 , contact your authorized dealer for details. NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased fr om the sys- tem’s memory .
T o Arm the System: Remove the keys from the ignition switch and exit the vehicle. Lock the doors and liftgate by pressing the power door LOCK switch or the LOCK button on the Remote Keyless Entry (RKE) transmitter .
ILLUMINA TED ENTRY The interior lights come on when you open any door . They will remain on for about 30 seconds after all doors are closed then fade to of f.
T o Unlock the Doors and Liftgate Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door , or twice to unlock all doors and the liftgate. The parking lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on.
T o Lock the Doors and Liftgate Press and r elease the LOCK button on the RKE transmit- ter to lock all doors and the liftgate. If the ignition is OFF when the doors are locked, the parking lights will flash once and the horn will sound a single chirp.
Flash Lights with Lock The feature will cause the parking lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This feature can be turned on or off.
Using the Panic Alarm NOTE: The P ANIC and SECURITY alarms ar e quite differ ent. Please take a moment to activate the P ANIC and SECURITY modes to hear the dif ferences in the horn. If one should sound in the future, you will need to know which mode has been activated in order to deactivate it.
2. W ith the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the batteries. A void touching the new batteries with your fingers.
NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1.
Once the engine starts it will run for 15 minutes. T o cancel remote start, pr ess and release the REMOTE ST ART button once. T o enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the UNLOCK button on the RKE transmitter .
If any other active warnings including “GA TE” or “GAS- CAP” are pr esent, they will be shown in the VF display and will also continue to cycle. If the vehicle is moving, three single chimes will occur (one chime for each complete display cycle, three cycles total).
W ARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition lock, and lock your vehicle. Do not leave unattended children in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death.
Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The automatic door locks feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pr essed.
4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this featur e to its previous setting. NOTE: Use the automatic door locks feature in accor - dance with local laws. Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with power door locks if: 1.
4. A single chime will indicate the completion of the programming. 5. Repeat these steps if you want to return this featur e to its previous setting. NOTE: Use the automatic unlock doors on exit feature in accordance with local laws.
NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window , and open the door with the outside door handle. WINDOWS Power Windows The power window controls ar e located on the driver’s door trim panel.
W ARNING! Never leave children in a vehicle with the keys in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death.
Auto Up Feature with Anti-Pinch Protection — If Equipped On some models, the driver’s power window switch has an “Auto Up” feature. Pull the window switch up to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the auto-up operation, push down on the switch briefly .
W ARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Reset At some point in time, it may be necessary to reactivate the auto-up feature. T o do so, perform the following procedur e: 1.
Wind Buffeting W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. Y ou and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems.
W ARNING! In a collision, you and your passengers can suffer injuries, including fatalities, if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly .
W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. W earing your belt in the wrong place could make your injuries in a collision much worse.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal inju- ries.
W ARNING! (Continued) A shoulder belt placed behind will not protect you from injury during a collision. Y ou are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together .
5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button marked PRESS on the buckle. The belt will automatically retract to its stowed position.
Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Pr ess the release button to release the anchorage, and then move it up or down to the position that fits you best.
Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to r emove any slack in the shoulder belt. When T o Use The Automatic Locking Mode Anytime a child safety seat is installed in the rear center seating position.
W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly “automatic locking retrac- tor” feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual.
The Enhanced W arning System (BeltAlert 威 ) can be en- abled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST ART position.
Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible.
Driver And Front Passenger Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt r estraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment.
This vehicle is equipped with window bags to protect the driver , front, and rear passengers sitting next to a win- dow . They are located above the side windows. Their covers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim, but they will open to allow airbag deployment.
W ARNING! (Continued) • Do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require permanent attachments (bolts or screws) for instal- lation on the vehicle roof.
Here ar e some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years and younger should always ride buckled up in a rear seat. Infants in rear facing child r estraints should NEVER ride in the front seat of a vehicle with a passenger airbag.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Occupant Classification System (OCS) — Front Pas- senger Seat Only − Occupant Classification Module − Passenger Airbag Disable (P AD) Indicator Light − W eight Sensors How The Airbag Syste.
W ARNING! Ignoring the “Airbag W arning Light” in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away .
The “P AD Indicator Light” should not be illuminated when an adult passenger is properly seated in the fr ont passenger seat. In this case, the airbag is ready to be inflated if a collision requiring an airbag occurs.
NOTE: Even though this vehicle is equipped with an Occupant Classification System, children 12 years and younger should always ride buckled up in a rear seat in an appropriate child r estraint.
improperly classified. Ensur e that the front passenger seatback does not touch anything placed on the back seat because this can also affect occupant classification. Also, if you fold down the rear seat, check to be sur e it doesn’t touch the front passenger seat.
The driver front airbag gas is vented thr ough the vent holes in the sides of the airbag. The passenger front airbag gas is vented through the vent holes in the sides of the airbag. In this way , the airbags do not interfere with your control of the vehicle.
The front passenger seat assembly contains critical com- ponents that affect the fr ont passenger airbag deploy- ment. Correctly functioning fr ont passenger seat compo- nents are critical for the Occupant Classification System (OCS) to properly classify the fr ont passenger and calcu- late the proper airbag deployment.
If A Deployment Occurs The airbag system is designed to deploy when the Occupant Restraint Control (ORC) module detects a moderate-to-severe fr ontal collision to help restrain the driver and front passenger , and then to immediately deflate. NOTE: A frontal collision that is not severe enough to need airbag protection will not activate the system.
W ARNING! Deployed airbags cannot protect you in another col- lision. Have the airbags, and seat belt retractor as- sembly replaced by an authorized dealer as soon as possible.
W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice.
Airbag W arning Light Y ou will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free.
In the event that an investigation is undertaken by Chrysler LLC (regar dless of initiative), the company or its designated repr esentative will first obtain permission of the appropriate custodial en.
• Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Engine control status (including engine speed) • T ransmission gear selection • Cruise contr ol s.
Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used: r earward-facing infant carriers and “convertible” child seats.
Here ar e some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable safety standards. The manufactur er also recommends that you try a child restraint in the vehicle seats wher e you will use it before you buy it.
• In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it.
The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat.
LA TCH-compatible child restraint systems are now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint systems having attachments for those anchorages will continue to also have features for installation using the vehicle’s seat belts.
Installing the LA TCH-Compatible Child Restraint System W e urge that you car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system.
In addition, there ar e tether strap anchorages behind each rear seating position located on the back of the seat. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap.
child restraint r earward and downward into the seat, removing slack in the straps accor ding to the child restraint manufactur er’s instructions. W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint.
If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate fr om the buckle, turn the buckle around, and insert the latch plate into the buckle again.
T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and possibly injured, or injur e a passenger during panic braking or in a collision. Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts.
SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO), follow these safety tips: • Do not inhale exhaust gases.
Seat belt assemblies must be replaced after an accident if they have been damaged i.e., (bent retractor , torn web- bing, etc.). If there is any question r egarding belt or retractor condition, r eplace the belt.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 3 ▫ Inside Day/Night Mirror ................ 8 3 ▫ Automatic Dimming Mirror — If Equipped . . . 84 ▫ Outside Mirrors ....................... 8 4 ▫ Power Mirrors .
▫ V oice T raining ....................... 1 2 0 䡵 Seats ............................... 1 2 0 ▫ Front Manual Seat Adjustment ........... 1 2 0 ▫ Front Seat Adjustment — Recline ......... 1 2 1 ▫ Six-W ay Driver’s Power Seat W ith Manual Recliner .
▫ Mist Feature ........................ 1 3 3 䡵 T ilt Steering Column ................... 1 3 4 䡵 Electronic Speed Contr ol — If Equipped ...... 1 3 5 ▫ T o Activate ......................... 1 3 5 ▫ T o Set At A Desir ed Speed ...........
▫ Closing Sunroof - Expr ess ............... 1 5 1 ▫ Closing Sunroof - Manual Mode .......... 1 5 2 ▫ Pinch Protect Featur e .................. 1 5 2 ▫ Pinch Protect Override ................. 1 5 2 ▫ V enting Sunroof - Express .............
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror . The mirror should be adjusted to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror will automatically adjust for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light in the button will illuminate indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror .
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upwar d. The lights will turn on automati- cally . Closing the mirror cover will turn off the light.
UConnect 威 is a voice-activated, hands-free, in-vehicle communications system. UConnect 威 allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ).
Phone Button The rearview mirr or contains the microphone for the system (depending on the type of mirror and radio equipped), and either the radio or the mirror has the two contr ol buttons (PHONE Button and VOICE RECOGNITION button) that will enable you to access the system.
• For certain operations, compound commands can be used. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing. ⬙ • For each feature explanation in this section, only the combined form of the voice command is given.
T o complete the pairing process, you will need to r efer- ence your cellular phone Owner’s Manual. The UConnect 威 website may also provide detailed instr uc- tions for pairing. The following are general phone to UConnect 威 system pairing instructions: • Press the PHONE button to begin.
Dial by Saying a Number • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Dial. ⬙ • The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ .
Add Names to Y our UConnect 威 Phonebook NOTE: Adding names to the UConnect 威 phonebook is recommended when the vehicle is not in motion. • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook New Entry .
Phonebook Download – Automatic Phonebook T ransfer From Mobile Phone If equipped and specifically supported by your phone, UConnect 威 automatically downloads names (text names) and number entries from the mobile phone’s phonebook. Specific Bluetooth 威 Phones with Phone Book Access Profile may support this featur e.
Phonebook Download — Single Entry If equipped and supported by your phone, UConnect 威 allows the user to download entries from their phone via Bluetooth 威 .
• Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, r ecite the new phone number for the phonebook entry that you are editing.
• After you enter the name, the UConnect 威 system will ask you which designation you wish to delete: home, work, mobile, pager , or all. Say the designation you wish to delete. • Note that only the phonebook entry in the current language is deleted.
• The UConnect 威 system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed thr ough the UConnect 威 system if the feature(s) ar e available on your cellular service plan.
Making a Second Call While Current Call is in Progress T o make a second call while you are curr ently on a call, press the VOICE RECOGNITION button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call.
Call T ermination T o end a call in progr ess, momentarily press the PHONE button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically .
UConnect 姞 System Features Language Selection T o change the language that the UConnect 威 system is using: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais.
Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. T o do this, press the PHONE button and say ‘Setup’, followed by ‘Emergency’.
Paging T o learn how to page, refer to ⬙ W orking with Automated Systems. ⬙ Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the UConnect 威 system. V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems.
NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect 威 system (while dial- ing via the cellular phone keypad, the user must exercise caution and take precautionary safety measur es).
Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect 威 system allows ongoing calls to be trans- ferred fr om your cellular phone to the UConnect 威 system without terminating the call.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Select Phone ⬙ and follow the prompts. • Y ou can also press the VOICE RECOGNITION button at any time while the list is being played, and then choose the phone that you wish to select.
From outside the UConnect 威 mode (e.g., fr om radio mode): • Press and hold the VOICE RECOGNITION button for five seconds until the session begins, or , • Press the VOICE RECOGNITION button and say the ⬙ Setup, V oice T raining ⬙ command. Repeat the words and phrases when pr ompted by the UConnect 威 system.
• fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some.
• dry weather conditions, and • operation from the driver’s seat. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect 威 system. • Echo at the far end can sometimes be reduced by lowering the in-vehicle audio volume.
1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 11 3.
1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompt.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again V oice Comma.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment.
When you press the VR har d-key , you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR har d-key , listen for the beep, and say your command.
Commands The V oice Recognition system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR har d-key .
Radio FM T o switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select th.
Memo T o switch to the voice recor der mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding you may press the VR hard-key to stop recor ding.
V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the UConnect 威 system V oice T raining feature may be used. 1. Press the VR har d-key , say “System Setup” and once you are in that menu then say “V oice T raining.
Using body pressur e, move forward and rearwar d on the seat to be sure the seat adjusters have latched. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
W ARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Fold Flat Front Passenger Seat The front passenger seat can be folded flat to allow for extended cargo space. Pull up on the lever to fold down the seat back. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear .
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for each heater ar e located near the bottom center of the instrument panel. After turning ON the ignition, Press the switch once to select High level heating.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
• Be sure that the fr ont seats are fully upright and positioned forward. This will allow the r ear seat to fold down easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
T o Raise Rear Seat If locked in the folded position, pull the release strap (toward the fr ont of the vehicle). Raise the seatback and lock it into place. If interference from the car go area prevents the seatback fr om fully locking, you will have difficulty r eturning the seat to its proper position.
2. Push the safety latch lever to the right. It is located between the grille and hood opening left of the center . T o prevent possible damage: • Do not slam the hood to close it. • Use a firm downward push at the center fr ont edge of the hood to ensure that both latches engage.
LIGHTS Multifunction Lever The multifunction lever controls the operation of the parking lights, headlights, headlight beam selection, passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column.
Parking Lights, Instrument Panel Lights and Headlights T urn the end of the multifunction lever to the first detent for parking lights and instrument panel lights. T urn to the second detent for headlight operation. T o change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down.
Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steer - ing wheel. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. Front Fog Lights — If Equipped The front fog light switch is in the multifunction lever .
Interior Lights The overhead light comes on when a door is opened. It may also be turned on by rotating the contr ol for the dimmer switch on the multifunction lever fully upward.
CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
TIL T STEERING COLUMN T o tilt the column, push down on the lever under the multifunction lever and move the wheel up or down as desired. Pull the lever back upwar ds to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever is located on the right side of the steering wheel. T o Activate Push the ON/OFF button.
NOTE: The vehicle should be traveling at a steady speed and on level ground befor e pressing the SET lever . T o Deactivate A soft tap on the brake pedal, pulling the Electronic Speed Control lever to.
Manual T ransmission Depressing the clutch pedal will disengage the Electr onic Speed Control. A slight increase in engine RPM befor e the speed control disengages is normal. V ehicles equipped with manual transmissions may need to be shifted into a lower gear to climb hills without speed loss.
System Usage Precautions NOTE: • Ensure that the r ear bumper is free of dirt and debris to keep the Rear Park Assist System operating prop- erly . • Jackhammers, large tr ucks, and other vibrations could affect the performance of the Rear Park Assist System.
CAUTION! (Continued) • The vehicle must be driven slowly when using the Rear Park Assist System to be able to stop in time when the obstacle is detected. It is recommended that the driver looks over his/her shoulder when using the Rear Park Assist System.
W ARNING! (Continued) • Before using the Rear Park Assist System, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the ve- hicle when the vehicle is not used for towing.
V ehicles Equipped with Rear Park Assist Switch Y ou can turn the Rear Park Assist System on or off by pressing the Rear Park Assist switch located the lower switch bank below the climate controls.
The warning display contains two sets of yellow and red LEDs, one set to warn of obstacles behind the left rear of the vehicle and the other set to warn of obstacles behind the right rear of the vehicle. The driver can view the LEDs either through the r ear view mirror or by looking at the display above the rear window .
W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER Inner LED 79 in (200 cm) Y ellow Sounds for 1 ⁄ 2 second 1st LED 51 in (130 cm) Y ellow None 2nd LED 45 in (1 15 cm) Y ellow None 3rd LED 31.
GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to thr ee remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink 威 unit operates off your vehicle’s battery .
W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the hand-held transmitter 1–3 in (3-8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view . 3.
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the “Learn” or “T raining” button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming.
Reprogramming A Single HomeLink 姞 Button T o re-pr ogram a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desir ed HomeLink 威 button until the indicator light begins to flash after 20 seconds.
General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2.
W ARNING! • Never leave unattended children in a vehicle with the key in the ignition switch. Occupants, particu- larly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
position. The sunroof will close fully and stop automati- cally . This is called Express Close. During Express Close operation, any movement of the switch will stop the sunroof. NOTE: T o ensure the sunr oof is fully closed, press and hold the switch until the sunroof has completely stopped moving.
Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter-type sound in the ears.
ELECTRICAL POWER OUTLET This vehicle has two 12-V olt auxiliary power outlets that can provide up to 20 Amps of current for accessories designed for use with the standard power outlet adapt- ers. The front power outlet, located in the lower portion of the instrument panel, has a snap on plastic cap so that it can be covered when not in use.
W ARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.
POWER INVERTER — IF EQUIPPED There is a 1 10-V olt, 150-W att power inverter outlet lo- cated on the back of the center console to convert DC current to AC curr ent. This outlet can be used to power small appliances and electronics. Press the switch located in the center stack lower switch bank to turn the power on to the outlet.
NOTE: When the inverter switch is pressed, ther e will be a delay of approximately one second befor e the inverter status indicator turns ON. The status indicator of the AC power inverter indicates whether the inverter is producing AC power . NOTE: Due to built in overload protection; the inverter will shut down if the power rating is exceeded.
CUPHOLDERS In the center console, there ar e two cupholders for the front seat passengers. The rear passengers have cupholders at the r ear of the center console.
STORAGE Front Storage Compartment The front storage compartment (located on the left side of the instrument panel) can hold cell phones, PDAs, and other small items.
The center console has a removable storage tray which can hold cell phones, PDAs, and other small items. CARGO AREA FEA TURES Cargo Light The cargo ar ea light is activated by opening the liftgate, opening any door , or by rotating the dimmer control on the multifunction lever to the extreme top position.
W ARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. T o avoid loss of control resulting in per- sonal injury , follow these guideli.
Cargo Load Floor — If Equipped The panel in the load floor is reversible for added utility . One side features a plastic lined tray which can hold a variety of items. The maximum load capacity of the load floor is 400 lbs (181 kg). The cargo load floor is held by spring loaded latches.
2. Lift the cover . 3. Flip the cover over , and lock panel back into position. Rear Cargo Slide Out System (Load N Go 姞 )—I f Equipped The sliding cargo load floor (Load N Go 威 ) slides back and forth on steel tracks for convenience. The maximum load capacity is 400 lbs (181 kg).
2. Squeeze the right hand release handle. 3. Pull out the sliding panel. 4. Squeeze the right hand r elease handle to slide the panel back into the vehicle.
REAR WINDOW FEA TURES Rear Window Wiper/W asher — If Equipped A rotary ring switch on the control lever (located on the right side of the steering column), controls operation of the rear wiper/washer function. Rotating the center of the switch up to the ON position will activate the wiper .
Rear Window Defroster — If Equipped The pushbutton for the rear window defr oster is located on the mode knob of the climate control switch bank. Press this button to turn on the r ear window defroster and the electric r emote control heated mirrors (optional).
NOTE: Metal rails/crossbars are of fered by Mopar 威 accessories. See your authorized dealer . External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, do not exceed the maximum vehicle load capacity .
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ................ 1 7 2 䡵 Instrument Cluster ..................... 1 7 3 䡵 Instrument Cluster Description ............ 1 7 4 䡵 Compass And T rip Computer — If Equipped .
䡵 Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) ................................ 2 0 0 ▫ Operating Instructions - Radio Mode ....... 2 0 1 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) .
▫ Operation Instructions — CD Mode For CD And MP3 Audio Play .................. 2 3 3 ▫ Notes On Playing MP3 Files ............. 2 3 5 ▫ List Button (CD Mode For MP3 Play) ...... 2 3 8 ▫ Info Button (CD Mode For MP3 Play) ...... 2 3 8 䡵 Satellite Radio — If Equipped (REN/REQ/RER/RES/REU Radios Only) .
INSTRUMENT P ANEL FEA TURES 1 - Air Outlet 6 - Glove Compartment 1 1 - Hazard W arning Flasher 2 - Instrument Cluster 7 - Climate Control 12 - Electronic Stability Contr ol / T raction Control Switch .
INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 173 4.
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. 2. Fuel Door Reminder This symbol indicates the side of the vehicle where the fuel cap is located. 3. T emperature Gauge The temperature gauge shows engine coolant tempera- ture.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
7. Speedometer Shows the vehicles speed. 8. High Beam Indicator This indicator shows that the headlights are on high beam. Push the multifunction lever forward to switch the headlights to high beam, and pull toward yourself (normal position) to return to low beam.
If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb.
The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied.
17. Charging System Light This light shows the status of the electrical charg- ing system. The light should come on when the ignition switch is first turned ON and remain on briefly as a bulb check.
21. Oil Pressur e W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on.
25. T ire Pressur e Monitoring T elltale Light Each tire, including the spar e (if provided), should be checked monthly , when cold and inflated to the inflation pressur e recommended by the vehicle manufacturer on the vehicle placard or tir e inflation pressure label.
as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of r eplacement or alternate tires or wheels on the vehicle that pr event the TPMS from functioning pr operly .
26. Odometer/T rip Odometer The odometer shows the total distance the vehicle has been driven. The TRIP ODOMETER shows individual trip mileage. T o toggle between the odometer and the trip odometer , press the ODOMETER/TRIP ODOMETER button. T o reset the TRIP ODOMETER, press and hold the button while in trip mode, until the TRIP ODOMETER r esets.
U.S. federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
27. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system, called OBD, that monitors engine and automatic transmission con- trol systems. The light will illuminate when the key is in the ON position, before engine start.
30. Compass/T rip Computer or Electronic V ehicle Information Center (EVIC) Display — If Equipped When the appropriate conditions exist, this display shows the Compass/T rip Computer or Electronic V ehicle Information Center (EVIC) messages.
These messages can be manually turned off by pr essing the right button (on the instrument cluster). Control Buttons Press and r elease the odometer/trip odometer reset but- ton (right side of the instrument cluster) to access the compass/trip computer displays.
Compass/T emperature Display Compass V ariance Compass V ariance is the differ ence between Magnetic North and Geographic North. T o compensate for the differ ences, the variance should be set for the zone where the vehicle is driven, per the zone map.
NOTE: The factory default zone is 8. During program- ming, the zone value will wrap around fr om zone 15 to zone 1. Manual Compass Calibration If the compass appears erratic, inaccurate or abnormal, you may wish to calibrate the compass. Prior to calibrat- ing the compass, make sure the pr oper zone is selected.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster . This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel.
The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: Press and r elease the MENU button and the mode displayed will change between T rip Functions, Navigation (if equipped), System Status, Personal Settings.
• Left/right front door ajar (one or mor e, with a single chime if speed is above 1 mph/1 km/h) • Left/right rear door ajar (one or mor e, with a single chime if speed is above 1 mph/1 km/h) • Door(s) ajar (with a single chime if vehicle is in motion) • Liftgate ajar (with a single chime) • Left front low pr essure (with a single chime).
1. T urn the ignition switch to the ON position. (Do not start the engine). 2. Fully depress the accelerator pedal slowly thr ee times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset.
NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value. When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of LOW FUEL.
Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new , the compass may appear erratic and the EVIC will display CAL until the compass is calibrated.
Compass V ariance Compass variance is the differ ence between magnetic North and geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
4. Press and r elease the FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and r elease the COMP ASS button to exit. Personal Settings (Customer-Programmable Features) Personal Settings allows the driver to set and recall features when the transmission is in P ARK.
transmitter UNLOCK button twice to unlock the passen- gers’ doors. When All Doors 1st Press is selected, all of the doors will unlock on the first press of the RKE transmitter UNLOCK button. T o make your selection, press and r elease the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Pr ess” appears.
Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, hands–free system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned off.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio.
Phone Button (UConnect 威 Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect 威 ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect 威 )” in Section 3.
R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in AM, FM or Satellite (if equipped) frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency .
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
• Audio Stream – Repeatedly pr essing SELECT will switch to differ ent audio languages (if supported on the disc) (if equipped). • Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc.
Enter the four-digit country code using the TUNE/ SCROLL control knob to scr oll up and down to select the number and then push to select. Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc).
NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file recor ding media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allow.
Operating Instructions — V oice Recognition System (VR) (If Equipped) For the radio, refer to “V oice Recognition System (VR)” in Section 3. For UConnect 威 “V oice Recognition System (VR),” refer to “Hands-Free Communication (UConnect 威 )” in Section 3.
AM/FM/CD/DVD MUL TIMEDIA SYSTEM RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER Multimedia systems contain a radio, CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD).
T o Manually Set the Clock — RER/REN 1. T urn on the multimedia system. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “User Clock” is displayed.
Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the multimedia system is turned off. Pr oceed as follows to change the current setting: 1. T urn on the multimedia system. 2. T ouch the screen wher e the time is displayed.
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Push the rotary T une/Scroll control knob a second time and MID will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the mid-range tones. Push the rotary T une/Scroll control knob a thir d time and TREBLE will display .
Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes.
CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player .
R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forward until FF is r eleased, or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner .
The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders.
rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rate. MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume control knob to turn on the radio. Push the On/V olume control knob a second time to turn off the radio.
Phone Button (UConnect 威 Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect 威 ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect 威 )” in Section 3.
INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the T une/Scroll contr ol knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information.
Program T ype 16-Digit Character Display Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title.
Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally .
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allow.
SA TELLITE RADIO — IF EQUIPPED (REN/REQ/RER/RES/REU RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio.
Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen.
Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes.
INFO Button — Except REU Radio Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the Song T itle all of the time (press and hold again to r eturn to normal display).
MUSIC TYPE Button — REU Radio Pressing this button pr ovides a MUSIC TYPES list from which you can make a selection. Once a selection is made, you can seek up, or down, or scan the channels and the radio will tune to the next station matching the selected format.
Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions — Hands-Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3.
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a r ocker type switch with a pushbutton in the center .
The left-hand control is a r ocker type switch with a pushbutton in the center . The function of the left-hand control is dif ferent depending on which mode you are in. Radio Operation Press the top of the switch to SEEK up for the next listenable station.
5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc wher e temperatures may become too high.
Blower Control Use this control to r egulate the amount of air forced thr ough the sys- tem in any mode you select. The fan speed increases as you turn the outer control ring to the right fr om the OFF position.
Mode Control The mode control allows you to choose from several patterns of air distribution. Y ou can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribu- tion you receive fr om that mode.
NOTE: The air conditioning compressor operates in both MIX and DEFROST or a blend of these modes even if the fan switch is not in the A/C position. This dehu- midifies the air to help dry the windshield. T o improve fuel economy , use these modes only when necessary .
Operating Tips W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases, turning on the air conditioning (pressing the “Snow- flake” button) will clear the fog.
Y our air conditioning system is also equipped with an automatic recir culation system. When the system senses a heavy load or high heat conditions, it may use partial recir culation A/C mode to pr ovide additional comfort.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 5 9 ▫ Normal Starting ..................... 2 5 9 ▫ Extreme Cold W eather (Below –20°F Or –29°C) ............................ 2 5 9 ▫ If Engine Fails T o Start .
▫ Shifting Procedur e - Electronically Shifted T ransfer Case ....................... 2 7 6 䡵 On-Road Driving T ips .................. 2 7 7 䡵 Off-Road Driving T ips .................. 2 7 8 ▫ When T o Use 4L Or 4LO (Low) Range ...... 2 7 8 ▫ Driving Through W ater .
䡵 T ires — General Information .............. 3 0 5 ▫ T ire Pr essure ........................ 3 0 5 ▫ T ire Inflation Pr essures ................. 3 0 6 ▫ T ire Pr essures For High Speed Operation .... 3 0 8 ▫ Radial-Ply T ires ..........
▫ Carbon Monoxide W arnings ............. 3 3 0 䡵 Adding Fuel ......................... 3 3 1 ▫ Fuel Filler Cap (Gas Cap) ............... 3 3 1 ▫ Loose Fuel Filler Cap Message ........... 3 3 3 䡵 V ehicle Loading ....................... 3 3 4 ▫ Certification Label .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death.
If Engine Fails to Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . (Continued) W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started.
CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key is released.
After Starting The idle speed will automatically decrease as the engine warms up. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat buildup may cause serious injury or death. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather .
CAUTION! (Continued) • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear , make sure your foot is firmly on the brake pedal.
Brake/T ransmission Interlock Manual Override Y our vehicle may be equipped with a shift lock manual override. The manual override may be used in the event that the shift lever should fail to move from P ARK with the key in the ON position and the brake pedal de- pressed.
4–Speed Automatic T ransmission (3.7L Engine) NOTE: Under extreme cold temperatur es (-6°F (-21°C) and when in DRIVE, transmission operation may be briefly limited to only 2nd gear operation. Normal op- eration will resume once the transmission temperatur e has risen to a suitable level.
P ARK This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use P ARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply the parking brake first, then place the shift lever in the P ARK position.
NEUTRAL Move the shift lever into this gear only after the vehicle has come to a complete stop. Always depress and main- tain firm pressur e on the brake pedal while in this range. Apply the parking brake when leaving the vehicle in this range for extended periods of time.
NOTE: If the vehicle is started in extremely cold tem- peratures, the transmission may not shift into OVER- DRIVE and will automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperatur e has risen to a suitable level.
NOTE: TOW/HAUL mode locks out Over drive. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated. Pressing the switch a second time r estores normal operation. If the TOW/HAUL mode is desired, the switch must be pressed each time the engine is started.
If the problem is no longer detected, the transmission will return to normal operation. If the pr oblem persists, P ARK, REVERSE, and NEUTRAL will continue to oper- ate. Only 2nd gear range will operate in the DRIVE position. Have the transmission checked at your autho- rized dealer as soon as possible.
Gear Ranges NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. If there is a need to r estart the engine, be sure to cycle the key to the LOCK position before r estarting.
NEUTRAL Shift into NEUTRAL when the vehicle is standing for prolonged periods with the engine r unning. The engine may be started in this range. Set the parking brake if you must leave the vehicle. NOTE: T owing the vehicle, coasting, or driving for any other reason with the shift lever in NEUTRAL can result in severe transmission damage.
Overdrive Operation The overdrive automatic transmission contains an elec- tronically contr olled 5th gear (OVERDRIVE). The trans- mission will automatically shift from 4th gear to OVER- DRIVE if the .
T o reset the transmission, use the following pr ocedure: 1. Stop the vehicle. 2. Move the shift lever to the P ARK position. 3. T urn OFF the engine and be sure to turn the key to the LOCK position. 4. W ait approximately 10 seconds, then r estart the en- gine.
• If the vehicle has not been driven in several days, the first few seconds of operation after shifting the trans- mission into gear may seem sluggish. This is due to the fluid partially draining from the tor que converter into the transmission. This condition is normal and will not cause damage to the transmission.
When additional traction is requir ed, the transfer case 4WD LOCK position can be used to lock the front and rear driveshafts together and for ce the front and rear wheels to rotate at the same speed. This is accomplished by rotating the 4WD Contr ol Switch to the desired position.
2WD ⇔ 4WD LOCK Rotate the 4WD Control Switch to the desir ed position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. W ith the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after turn- ing the control switch.
OFF-ROAD DRIVING TIPS When T o Use 4L or 4LO (Low) Range When off-r oad driving, shift to 4L or 4LO for additional traction and control on slippery or dif ficult terrain, ascending or descending steep hills, and to increase low-speed pulling power .
Flowing W ater If the water is swift flowing and rising (as in storm run-of f) avoid crossing until the water level r ecedes and/or the flow rate is reduced. If you must cr oss flowing water , avoid depths in excess of nine inches. The flowing water can erode the str eambed causing your vehicle to sink into deeper water .
Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4L or 4LO. Use first gear and 4L or 4LO for very steep hills.
T raction Downhill Shift the transmission into a low gear and the transfer case to 4L or 4LO range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to contr ol the vehicle speed and direction.
W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary .
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
P ARKING BRAKE T o set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the “Brake W arning Light” in the instru- ment cluster will light. T o release the parking brake, pull up slightly , press the center button, then lower the lever completely .
W ARNING! • Always apply the parking brake fully when leav- ing your vehicle or it may roll and cause damage or injury . Also, be certain to leave the transmission in the P ARK position. Failure to do so may allow the vehicle to roll and cause damage or injury .
W ARNING! Significant over or under-inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The ABS conducts a low-speed self-test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement.
W ARNING! (Continued) • The capabilities of an ABS equipped vehicle must never be exploited in a reckless or dangerous manner , which could jeopardize the user’s safety or the safety of others.
• Do not drive too fast for road conditions, especially when roads ar e wet or slushy . A wedge of water can build up between the tire tr ead and the road.
W ARNING! Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes.
Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle.
Electronic Stability Program (ESP) This system enhances directional contr ol and stability of the vehicle under various driving conditions. ESP cor - rects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counter - acting the over/under steer condition.
W ARNING! The Electronic Stability Program (ESP) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent acci- dents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
Partial Of f This mode is entered by momentarily depr essing the ESP OFF switch (located in the center stack lower switch bank). When in “Partial Off” mode, the TCS portion of ESP , except for the “limited slip” feature described in the TCS section, has been disabled and the “ESP/TCS Indi- cator Light” will be illuminated.
NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the ESP OFF switch.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards.
• L T (Light T ruck) - Metric tire sizing is based on U.S. design standards. The size designation for L T -Metric tires is the same as for P-Metric tir es except for the letters “L T” that are molded into the sidewall preced- ing the size designation.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tir e can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tir e can .
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tel.
NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GA WRs) for the front and r ear axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section.
6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
304 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage it. Inflation pressur es specified on the placard are always cold tire inflation pr essure.
Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressure is very important.
W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 50 mph (80 km/h). Keep inflated to the cold tire inflation pressure listed on either your tire placard or limited-use spare tire and wheel assembly .
T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS Use “Class S” chains or other traction aids that meet SAE T ype “S” specifications. NOTE: Chains must be the proper size for the vehicle as recommended by the chain manufactur er .
These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. T ire chain use is permitted only on the r ear tires. NOTE: The use of class “S” chains is permitted with P235/65R17 and P225/75R16 tires. CAUTION! Do not use tire chains on vehicles equipped with tires other than P235/65R17 and P225/75R16 tires.
These effects can be r educed by timely rotation of tires. The benefits of rotation ar e especially worthwhile with aggressive tr ead designs such as those on On/Off-Road type tires. Rotation will incr ease tread life, help to main- tain mud, snow , and wet traction levels, and contribute to a smooth, quiet ride.
The tire pr essure will also increase as the vehicle is driven. This is normal and there should be no adjust- ment for this increased pr essure. • The TPMS will warn the driver of a low tire pr essu.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pressur e, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pr essure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels.
light will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning When a system fault is detected, the T ire Pr essure Moni- toring T elltale light will flash on and off for 75 seconds and then remain on solid.
NOTE: V ehicles with Compact Spare 1. The compact spare tir e does not have a tire pressur e monitoring sensor . Therefore, the TPMS will not monitor the pressur e in the compact spare tire.
• Three T rigger modules (mounted in three of the four wheel-wells) • V arious T ire Pr essure Monitoring System messages, which display in the Electronic V ehicle Information Center (EVIC) • T ire Pr essure Monitoring T elltale light The matching full size spare wheel and tir e assembly (if equipped) has a tire pr essure monitoring sensor .
Should this occur , you should stop as soon as possible and inflate the tires with low pr essure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pr essure value.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pr essure Monitoring T elltale light will no longer flash, and the ⬙ CHECK TPM SYS- TEM ⬙ message will no longer display , and a pressure value will display in place of the dashes.
NOTE: V ehicles with Compact Spare 1. The compact spare tir e does not have a tire pressur e monitoring sensor . Therefore, the TPMS will not monitor the pressur e in the compact spare tire.
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed operation.
4.0L Engine The 4.0L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer r ecommends the use of 89 octane for optimum performance.
The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE.
T o fix a Non-FFV vehicle inadvertently fueled once with E-85 perform the following: • drain the fuel tank (see your authorized dealer) • change the engine oil and oil filter • disconnect and reconnect the battery to r eset the engine controller memory More extensive r epairs will be required for pr olonged exposure to E-85 fuel.
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
stopped in an open area with the engine r unning for more than a short period, adjust the ventilation system to force fr esh, outside air into the vehicle. • Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised.
CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the Malfunction Indica- tor Light (MIL) to illuminate, due to fuel vapors escaping from the system.
W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground while filling.
VEHICLE LOADING Certification Label As requir ed by National Highway T raffic Safety Admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or B-Pillar .
T ire Size The tire size on the label r epresents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Improper weight distributions can have an adverse af fect on the way your vehicle steers and handles, and the way the brakes operate. CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GA WR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles.
measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of the trailer must be supported by the scale. W ARNING! If the gross trailer weight is 3,500 lbs (1 587 kg) or more, it is mandatory to use a weight-distributing hitch to ensure stable handling of your vehicle.
Frontal Area The frontal ar ea is the maximum height and maximum width of the front of a trailer . T railer Sway Control The trailer sway control is a telescoping link that can be installed between th.
W ARNING! An improperly adjusted weight distributing hitch system may reduce handling, stability , and braking performance and could result in an accident.
W ith W eight-Distributing Hitch (Correct) Improper Adjustment of W eight-Distributing Hitch (Incorrect) 340 ST ARTING AND OPERA TING.
T railer Hitch Classification Y our vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional trailer tow prep package.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission Model Frontal Area Max GTW (Gross T railer Wt) T ongue Wt. (See Note) 3.
When T owing T railers with Gross T railer W eight (GTW) between 3,500 Lbs (1 588 kg) and 5,000 Lbs (2 268 kg) The following chart provides maximum trailer weight ratings towable for the following engine/transmission combinations, ONL Y if using a weight distributing hitch.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or authorized dealer-installed options must be considered as part of the total load on your vehicle.
W ARNING! (Continued) Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident.
T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e inflation pressures ar e essential to the safe and satisfactory operation of your vehicle. Refer to the T ires–General Information section of this manual on T ire Pr essures for proper tir e inflation procedures.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
The electrical connections are all complete to the vehicle, but you must mate the harness to a trailer connector . Refer to the following illustrations.
T owing Tips Before setting out on a trip, practice turning, stopping and backing up the trailer in an area away fr om heavy traffic. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the T OW/ HAUL button should be selected.
T owing T ips — Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: − City Driving When stopped for short periods of time, put the trans- mission in NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed.
T owing — 4WD or All-Wheel Drive Models CAUTION! Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. Recreational towing (all four wheels on the ground) Recreational towing is NOT allowed.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 3 5 4 䡵 If Y our Engine Overheats ................ 3 5 5 䡵 Jacking And T ire Changing ............... 3 5 6 ▫ Jack Location ....................... 3 5 6 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHER The Hazard W arning Flasher switch is located on the lower switch bank below the climate controls. T o operate the Hazard W arning flasher , press the switch and all front and r ear directional signals will flash intermittently .
IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating your engine by taking the appropriate action. • On the highways — slow down. • In city traffic — while stopped, put transmission in NEUTRAL, but do not increase engine idle speed.
JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Removal Fit the jack handle extension over the drive nut. Use the lug wrench to r otate the nut counterclockwise until the spare is on the gr ound with enough slack in the cable to allow you to pull the tire out fr om under the vehicle. CAUTION! The winch mechanism is designed for use with the jack extension tube only .
Preparations For Jacking 1. Park the vehicle on a firm level surface. A void icy or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid being hit when operating the jack or changing the wheel.
W ARNING! (Continued) • Set the parking brake firmly and set an automatic transmission in P ARK; a manual transmission in REVERSE. • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack.
4. Locate the jack as shown. For the front tir es, place it in the notch on the body weld seam behind wheel to be changed. For the rear tir es, place it under the axle by the wheel to be changed. Position the jack handle on the jack. Do not raise the vehicle until you are sure the jack is fully engaged.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could slip off the jack and hurt someone near it.
JUMP-ST ARTING W ARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the contami- nated area immediately with large quantities of water .
5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. W ARNING! • Do not connect the cable to the negative post of the discharge battery .
TOWING A DISABLED VEHICLE Proper towing or lifting equipment is r equired to prevent damage to your vehicle. Use of safety chains is recom- mended. Attach towing device to main structural mem- bers of the vehicle not to bumpers or associated brack- ets.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.7L ............. 3 6 7 䡵 Engine Compartment — 4.0L ............. 3 6 8 䡵 Onboard Diagnostic System — OBD II ....... 3 6 9 ▫ Loose Fuel Filler Cap Message ........... 3 7 0 䡵 Emissions Inspection And Maintenance Programs .
▫ Brake System ....................... 3 8 8 ▫ Automatic T ransmission ................ 3 8 9 ▫ T ransfer Case ....................... 3 9 0 ▫ Front/Rear Axle Fluid ................. 3 9 1 ▫ Appearance Care And Pr otection From Corrosion ...
ENGINE COMP ARTMENT — 3.7L 1 — Air Cleaner Filter 6 — W asher Fluid Reservoir 2 — Engine Oil Dipstick 7 — Engine Coolant Reservoir 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Int.
ENGINE COMP ARTMENT — 4.0L 1 — Air Cleaner Filter 6 — Engine Oil Fill 2 — Engine Oil Dipstick 7 — W asher Fluid Reservoir 3 — Brake Fluid Reservoir 8 — Engine Coolant Reservoir 4 — Int.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improp- erly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster . T ighten the gas cap until a ⬙ clicking ⬙ sound is heard.
Y our vehicle has a simple ignition key-actuated test, which you can use prior to going to the test station. T o check if your vehicle’s OBD II system is ready , you must do the following: 1. Insert your ignition key into the ignition switch. 2. T urn the ignition to the ON position, but do not crank or start the engine.
Regardless of whether your vehicle’s OBD II system is r eady or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL is on with the engine running.
MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there ar e fixed maintenance intervals, there ar e other items that should operate satisfactorily without periodic maintenance.
Change Engine Oil Refer to the Maintenance Schedule in Section 8 for the proper maintenance intervals. NOTE: Under no circumstances should oil change in- tervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first.
Lubricants which do not have both the engine oil certi- fication mark and the correct SAE viscosity grade num- ber should not be used. Engine Oil V iscosity (4.0L Engine) SAE 10W -30 engine oil is preferr ed. SAE 5W -30 engine oil is allowed during cold weather only to improve cold weather starting.
NOTE: For best access to the oil filter , a drive on hoist should be used instead of a chassis hoist (3.7L Only). Engine Oil Filter Selection All of the manufacturer’s engines have a full-flow type disposable oil filter . Use a filter of this type for replace- ment.
Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. W ARNING! • Battery acid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing.
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a lithium based grease such as MOP AR 威 Spray White Lube to assure quiet, easy opera- tion and to protect against r ust and wear .
W ARNING! Commercial windshield washer solvents are flam- mable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly .
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interr upt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle.
Engine Coolant Checks Check engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fr esh engine coolant (anti- freeze).
CAUTION! • Mixing of engine coolant (antifreeze) other than the specified HOA T engine coolant (antifreeze) may result in decreased corrosion protection and engine damage.
When adding engine coolant (antifreeze): • The manufacturer r ecommends using MOP AR 威 Antifreeze/ Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology). • Mix a minimum solution of 50% HOA T engine coolant (antifreeze) and distilled water .
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the fr ont of the engine compartment.
• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install only the correct type thermostat. Other designs may r esult in unsatisfactory cooling performance, poor gas mile- age, and increased emissions.
W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking.
Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only manufacturer’s r ecommended transmis- sion fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole. Drain First remove fill plug (B), then drain plug (C). Recom- mended tightening torque for drain and fill plugs is 15–25 ft lbs (20–34 N·m). CAUTION! When replacing plugs, do not overtighten.
Adding Fluid Add lubricant only at the fill hole and only to the level specified above. Selection of Lubricant Use only manufacturer’s r ecommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover to remove.
• If you detect any stone chips or scratches in the paint, touch them up immediately . The cost of such repairs is considered the r esponsibility of the owner . • If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible.
• For tough stains, apply MOP AR 威 T otal Clean or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to r emove soap residue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner to a clean, damp cloth and remove stain.
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
Cavity Cartridge Fuse Mini- Fuse Description J1 40 Amp Green Power Folding Seat J2 30 Amp Pink T ransfer Case/Pwr Liftgate Module Cavity Cartridge Fuse Mini- Fuse Description J3 40 Amp Green Rear Door.
Cavity Cartridge Fuse Mini- Fuse Description J1 1 30 Amp Pink Sway Bar/ THA TCHAM Lock- Unlock/Power Sliding Door Module J13 60 Amp Y ellow Ignition Off Draw (IOD) — Main J14 40 Amp Green EBL (Rear .
Cavity Cartridge Fuse Mini- Fuse Description M8 20 Amp Y ellow Front Heated Seat M9 20 Amp Y ellow Rear Heated Seat (If Equipped) M10 20 Amp Y ellow Ignition Off Draw — V ehicle Entertainment System.
Cavity Cartridge Fuse Mini- Fuse Description M15 20 Amp Y ellow COL MOD, IR SNS, Heater V entilation, Air Conditioning/ Automatic T empera- ture Contr ol (HV AC/ A TC), Rearview Mirr or (RR VW MIR), C.
Cavity Cartridge Fuse Mini- Fuse Description M24 25 Amp Natural Rear W iper (REAR WIPER) M25 20 Amp Y ellow Fuel Pump (FUEL PUMP), Diesel Lift Pump (DSL LIFT PUMP) — Export Only M26 10 Amp Red Power.
Cavity Cartridge Fuse Mini- Fuse Description M35 10 Amp Red Heated Mirrors M36 20 Amp Y ellow Power Outlet #3 (BA TT) M37 10 Amp Red Anti-Lock Brake Sys- tem (ABS), Electronic Stability Program (ESP),.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Dome Light ......................... TL212–2 Liftgate Lamp ........................... 5 6 7 Overhead Console Lights ............. P L W214–2A Reading Light ....................... WL212–2 LIGHT BULBS — Exterior Bulb No.
5. Disconnect the electrical connector and replace the bulb. Left Front T urn Signal 1. T urn the steering wheel all the way to the right (full right lock). 2. Remove the door in the left wheel liner by twisting counter clockwise. Access to the bulb can be gained through the wheel liner hole.
Right Front T urn Signal 1. Open the hood. 2. Reach behind the headlight unit in the engine com- partment to access the turn signal bulb. 3. T wist the bulb counterclockwise to r emove. 4. Disconnect the electrical connector and replace the bulb. Front Side Marker 1.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear T ail, Stop, T urn Signal, and Backup Lights 1. Open the lift gate.
6. Disconnect the electrical connector . 7. Remove the bulb from the backplate. Center High Mounted Stop Light (CHMSL) 1. Remove the two screws securing the CHMSL. 2. Disconnect the electrical connector and washer hose (if equipped) from the CHMSL. 3.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 19.5 Gallons 73.8 Liters Engine Oil with Filter 3.7 Liter Engine (SAE 5W -20, API Certified) 5 Quarts 4.7 Liters 4.0 Liter Engine (SAE 10W -30, API Certified) 5.5 Quarts 5.2 Liters Cooling System * 3.7 Liter Engine (MOP AR 威 Antifreeze/Engine Coolant 5 Y ear/100,000 Mile Formula) 14 Quarts 13.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent Engine Oil (3.7L Engine) Use API Certified SAE 5W -20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 Automatic T ransmission Fluid T ransfer Case MOP AR 威 A TF+4 Automatic T ransmission Fluid Front Axle SA.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 1 2 䡵 Maintenance Schedule .................. 4 1 2 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , and transmission and add as needed.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid; change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid; change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing.
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter .
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect and replace PCV valve if necessary. † ❏ Replace the spark plugs (3.
102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the spark plugs (4.0L Engine). ❏ Replace the timing belt (4.0L Engine). ❏ Flush and replace the engine coolant.
120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the ignition cables (3.7L Engine). ❏ Replace the spark plugs (3.
132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary .
† This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 2 9 ▫ Prepar e For The Appointment ............ 4 2 9 ▫ Prepar e A List ....................... 4 2 9 ▫ Be Reasonable W ith Requests .
䡵 Publication Order Forms ................. 4 3 3 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 3 5 ▫ T readwear .......................... 4 3 5 ▫ T raction Grades ...................... 4 3 5 ▫ T emperature Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administra- tor , NHTSA, 400 Seventh Street, SW ., W ashington, D.C. 20590.
• Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -controlled ve- hicle systems and features.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle.
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
About Y our Brakes ....................... 2 8 4 ABS (Anti-Lock Brake System) .............. 2 8 5 Adding Fuel ........................... 3 3 1 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 376 Air Conditioner Maintenance ............... 3 7 8 Air Conditioning .
Autostick ............................. 2 7 2 Auxiliary Electrical Outlet (Power Outlet) ...... 1 5 4 Auxiliary Power Outlet ................... 1 5 4 Axle Fluid ............................. 4 1 0 Battery ............................... 3 7 7 Charging .
Cargo Load Floor ........................ 1 6 2 Cargo Slide Out System L o a d N G o .......................... 1 6 3 Cargo T ie-Downs ........................ 1 6 0 Cargo (V ehicle Loading) ................... 3 3 4 Cellular Phone ...................
Selection of Coolant (Antifreeze) ...... 383,408,409 Corrosion Pr otection ..................... 3 9 2 Cupholders ............................ 1 5 8 Customer Assistance ..................... 4 2 9 Daytime Running Lights ................... 1 3 1 Dealer Service .
Emergency , In Case of Jacking ............................. 3 5 6 Overheating .......................... 3 5 5 T owing ............................. 3 6 4 Emission Control System Maintenance ...... 370,412 Engine ............................... 3 6 7 Air Cleaner .
Flashers Hazard W arning ....................... 3 5 4 T urn Signal .................. 176,404,405,406 Flooded Engine Starting ................... 2 6 0 Floor Console .......................... 1 5 9 Fluid, Brake ........................... 4 1 0 Fluid Capacities .
Gasoline, Reformulated ................... 3 2 7 Gasoline/Oxygenate Blends ................ 3 2 8 Gauges Coolant T emperature ................... 1 7 4 Fuel ............................... 1 7 4 Odometer ........................... 1 8 4 Speedometer .
Infant Restraint ........................ 65,66 Inflation Pressur e T ires .................... 3 0 6 Information Center , V ehicle ................. 1 9 1 Inside Rearview Mirror .................... 8 3 Instrument Cluster .................... 173,174 Instrument Panel and Contr ols .
Brake W arning ........................ 1 7 7 Bulb Replacement ...................... 4 0 3 C a r g o .............................. 1 6 0 Center Mounted Stop ................... 4 0 7 Cruise .............................. 1 8 6 Daytime Running ......
Load N Go Sliding Cargo Floor .................... 1 6 3 Loading V ehicle ......................... 3 3 4 T i r e s ............................... 3 0 1 Locks ................................. 2 6 Child Protection ........................ 3 1 Door ..
Octane Rating, Gasoline (Fuel) ............ 326,327 Odometer T r i p ................................ 1 8 6 Off-Pavement Driving (Of f-Road) ............ 2 7 8 Off-Road Driving (Of f-Pavement) ............ 2 7 8 Oil, Engine ......................... 373,409 Capacity .
Power Door Locks ........................... 2 8 Inverter ............................. 1 5 6 Mirrors .............................. 8 5 Steering .......................... 282,283 Sunroof ............................. 1 5 0 W indows .................
Restraints, Occupant ...................... 3 7 Roll Over W arning ........................ 4 Roof T ype Carrier ....................... 1 6 6 Rotation, T ires .......................... 3 1 5 Safety Checks Inside V ehicle ................. 7 6 Safety Checks Outside V ehicle .
Service Contract ......................... 4 3 1 Service Engine Soon Light (Malfunction Indicator) .................... 1 8 6 Service Manuals ........................ 4 3 3 Setting the Clock ................ 202,216,220,229 Settings, Personal ........
Supplemental Restraint System - Airbag ........ 4 8 Synthetic Engine Oil ...................... 3 7 5 System, Remote Starting .................... 2 5 T achometer ............................ 1 8 1 T emperature Gauge, Engine Coolant .......... 1 7 4 T ether Anchor , Child Restraint .
T owing ............................... 3 3 6 24-Hour T owing Assistance ............... 1 0 1 Disabled V ehicle ....................... 3 6 4 Guide .............................. 3 4 2 Recreational .......................... 3 5 1 W eight ...........
Uniform T ire Quality Grades ................ 4 3 5 Universal T ransmitter ..................... 1 4 4 Upholstery Care ........................ 3 9 5 V anity Mirrors ........................... 8 6 V ariance, Compass .................... 189,197 V ehicle Certification Label .
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel.
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel.
2009 NITRO NITRO Chrysler LL C 81-326-0913 First Edition Printed in U.S.A. OWNER ’S MANU AL 2009.
Ein wichtiger Punkt beim Kauf des Geräts Dodge 2009 KA Nitro (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dodge 2009 KA Nitro noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dodge 2009 KA Nitro - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dodge 2009 KA Nitro reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dodge 2009 KA Nitro erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dodge 2009 KA Nitro besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dodge 2009 KA Nitro verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dodge 2009 KA Nitro. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dodge 2009 KA Nitro gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
