Benutzeranleitung / Produktwartung 2007 Caravan des Produzenten Dodge
Zur Seite of 520
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number ............... 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 4 ▫ Locking Doors W ith The Key .............
▫ T o Disarm The System ................... 1 9 ▫ Security System Manual Override ........... 1 9 䡵 Illuminated Entry System — If Equipped ....... 2 0 䡵 Remote Keyless Entry — If Equipped ......... 2 0 ▫ T o Unlock The Doors And Liftgate .
▫ Reinstalling Storage Bin Cover Emergency Release ............................. 4 5 䡵 Occupant Restraints ...................... 4 6 ▫ Lap/Shoulder Belts ..................... 4 7 ▫ Lap/Shoulder Belt Untwisting Procedur e ..... 5 3 ▫ Center Lap Belts .
A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransaxle Place the shift lever in P ARK.
NOTE: The power window switches, radio, power outlets, and removable console (if equipped), will r emain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle fr ont door will cancel this feature. W ARNING! NEVER leave children alone in a vehicle.
Key-In-Ignition Reminder An alarm will sound to remind you if the key is left in the ignition and the driver’s door is opened. Locking Doors With The Key Y ou can insert the key with either side up. T o lock the door , turn the key rearwar d, to unlock the door , turn the key forward.
Automatic T ransaxle Ignition Interlock System This system prevents the key fr om being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the key is in the ACC, or ON positions, and the brake pedal is depressed.
Shaft Lock Module (V ehicles Equipped with Premium Security System) — If Equipped The shaft lock module is located inside the steering column. The module works in conjunction with the Sentry Key to prevent the steering shaft fr om rotating if someone inserts an invalid ignition key into the ignition lock cylinder in the instrument panel.
NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer . Customer Key Programming Y ou can program new sentry keys to the system if you have two valid sentry keys by performing the following procedur e: 1.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
NOTE: If the SECURITY light stays on continuously during vehicle operation, have the system checked by your dealer . T o Disarm the System Use the Keyless Entry transmitter to unlock the door .
ILLUMINA TED ENTR Y SYSTEM — IF EQUIPPED The courtesy lights will turn on when you use the keyless entry transmitter or open the doors. This feature is only available if you have Remote Keyless Entry . The lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned on.
Three button transmitters will pr ovide basic UNLOCK, LOCK and P ANIC functions. Six button transmitters will provide functions that allow the same basic operation as the three button, but may also be used to Open/Close the optional power liftgate, left power sliding door , or right power sliding door .
T o unlock the doors and liftgate: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door side of the vehicle, or twice to unlock all doors and liftgate. The illuminated entry system also turns on. The Remote Unlock Driver’s Door 1st feature can be enabled or disabled by performing the following proce- dure: 1.
Using The Panic Alarm: T o turn the panic alarm feature ON or OFF , press and hold the P ANIC button on the transmitter for at least one second and release. When the panic alarm is on, the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on.
T o Open/Close Left Power Sliding Door — If Equipped Press the LEFT button twice within five seconds to open/close the left power sliding door . If the button is pushed while the door is being power closed, the door will reverse to the full open position.
the procedur e in the Electronic V ehicle Information Cen- ter (EVIC), Customer Programmable Featur es section on vehicles so equipped. The table below explains the Lamp Flash options.
T ransmitter Battery Service The recommended r eplacement battery is one CR2032 battery . NOTE: Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/ perchlorate NOTE: Do not touch the battery terminals that are on the back housing or the printed circuit boar d.
2. Remove and r eplace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case snap two halves together .
If the lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys ar e not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate.
5. W ithin 30 seconds, press the driver’s door lock switch in the LOCK direction. 6. A single chime will be hear d to indicate the feature has been disabled. 7. T o reactivate this featur e, repeat the above steps. 8. If a chime is not hear d, program mode was canceled before the featur e could be disabled.
5. W ithin 30 seconds, press the driver’s door lock switch in the UNLOCK direction. 6. A single chime will sound to indicate the feature has been changed. 7. Repeat the above steps to alternate the availability of this feature. 8. If a chime is not hear d, program mode was canceled before the featur e could be changed.
Power V ent Windows — If Equipped Switches on the driver’s door trim panel let the driver operate the two vent windows from the fr ont seat. Power Windows — If Equipped Y ou can control either fr ont window using switches on the driver’s door trim panel.
Auto Down Feature — If Equipped The driver’s window switch has an auto down feature. Press the window switch past the detent, r elease, and the window will go down automatically . T o open the window part way , press the window switch part way and release it when you want the window to stop.
SLIDING SIDE DOOR The sliding door may be opened from the inside or the outside. Pull out on the outside handle to open the sliding door from the outside. T o open the sliding door from the inside, pr ess the button on the grab handle and open the door .
NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door .
The power sliding door may also be opened by pressing the switches on the overhead console or the switch located on the trim panel just in front of the sliding door . T o keep your door operating properly , observe the fol- lowing guidelines. • Always open the door smoothly .
If the inside or outside door handles are used while the power sliding door is activated, the power sliding door feature will be canceled and the door must be opened or closed manually .
Child Protection Door Lock T o provide a safer envir onment for small children riding in the rear seats, the sliding doors ar e equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
NOTE: • After engaging the child protection door lock system, always test the door from the inside to make certain it is in the desired position. • When the child lock system is engaged the door c.
NOTE: • After setting the child protection door lock system, always test the door from the inside to make certain it is in the desired position. • The power sliding door switches will not operate if the vehicle is in gear or the vehicle speed is above 0 mph (0 km/h).
If the liftgate is locked and is not equipped with a powered liftgate, pr essing the button on the remote keyless entry transmitter will result in the liftgate becom- ing unlocked for 30 seconds allowing you to manually access the liftgate area. NOTE: On vehicles without power locks, the liftgate can only be opened using the vehicle keys.
The power liftgate may also be opened by pressing the button located on the overhead console. When the remote keyless entry transmitter button is pressed and the “Lamp Flash” featur e is enabled, the tail lights will flash to signal that the liftgate is opening or closing.
• The power liftgate must be in the full open or close positions for any of the buttons to operate. If the liftgate is not in the full open or close positions it must be opened or closed manually . • If the liftgate release button is activated while the power liftgate is closing, the liftgate will reverse to the full open position.
Gas props support the liftgate in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather . SEA T STORAGE BIN SAFETY W ARNING W ARNING! Always close the storage bin covers when your vehicle is unattended.
NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark strap attached to the storage bin cover latching mechanism.
Push the strap into the latch mechanism until it engages around the latch post. NOTE: Do not use the storage bin emergency r elease to lift the storage bin cover . The strap is intended for emergency r elease only . OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems.
W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly .
W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the r ear seats. Grasp the latch plate and pull out the belt.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position.
W ARNING! • A lap belt worn too loose or too high is dangerous. • A belt worn too loose can allow you to slip down and under the belt in a collision. • A belt that is too high will apply crash forces to the abdomen, not to the stronger hip bones.
chime and flash the Seat Belt W arning Light for 96 seconds or until the driver’s or front passenger’s seat belt is buckled. The Enhanced W arning System (BeltAlert) will be reacti- vated if the driver’s or front passenger’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h).
The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this pr ocedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver’s or front passenger’s seat belt r emains unbuckled.
Driver And Front Passenger Supplemental Restraint Systems (SRS) — Airbags This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel.
The front airbags have a multi stage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations that define Occupant Classification (Refer to “Occupant Classification System” in this section).
W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be in- jured because the airbags are not there to protect you. These protective covers for the airbag cush- ions are designed to open only when the airbags are inflating.
NOTE: The passenger front airbag may not deploy even when the driver front airbag has if the Occupant Classi- fication System (refer to “Occupant Classification Sys- tem” in this section) has determined the seat is empty or is occupied by a child.
Y ou should read the instructions pr ovided with your child restraint to make sur e that you are using it pr operly . 2. All occupants should wear their lap and shoulder belts properly . 3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate.
Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • AIRBAG Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtai.
proper rate of inflation. The fr ont airbag inflators are designed to provide dif ferent rates of airbag inflation. • The ORC may modify the rate of inflation based on the occupant size provided by the Occupant Classification Module. • The ORC will not detect side, roll over , or rear impacts.
• The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel. When the ORC and impact sensors detects a collision requiring the air - bags, it signals the inflator units.
• When the ORC and the side impact sensors (with side impact option) detects a collision requiring the Driver Inflatable Knee Blocker , it signals the inflator unit. A quantity of nontoxic gas is generated to inflate the Driver Inflatable Knee Blocker .
and cushion needs to be serviced in any way (includ- ing removal or loosening/tightening of seat attach- ment bolts), take the vehicle to your authorized dealer .
indicator light comes on when an adult is in the passen- ger seat, have the passenger re-position themselves in the seat until the light goes out. Remember , if the P AD indicator light is illuminated the passenger front airbag will not inflate.
turned OFF . When the OCS system detects an adult the P AD indicator light will be off, and the airbag will be enabled. • The Belt T ension Sensor (BTS) — If Equipped is located at the outboard passenger lap belt anchor . The BTS generates a signal based on outboard lap belt tension.
The following requir ements must be strictly adhered to: • Do not modify the front passenger seat assembly or components in any way . • Do not modify the front seat center console or center position seat in any way . • Do not use prior or future model year seat covers not designated for the specific model being repair ed.
If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold.
Enhanced Accident Response If the airbags and seat belt pretensioners deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically .
W ARNING! • Y ou need proper knee impact protection in a collision. Do not mount or locate any aftermarket equipment on or behind the knee bolsters. • It is dangerous to try to repair any part of the airbag system yourself. Be sure to tell anyone who works on your vehicle that it has airbags.
Event Data Recorder (EDR) In the event of an airbag deployment, your vehicle is designed to recor d up to 2-seconds of specific vehicle data parameters (see list below) in an event data recor der prior to the moment of airbag deployment. Please note that such data are ONL Y recor ded if an airbag deploys, and are otherwise unavailable.
1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used in defense of litigation involving a DaimlerChrysler Corporation product 3.
T o obtain Integrated Child Seat replacement instructions: Use the order form at the back of this manual and specify publication number 81-016-1950. Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too.
• Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and ⬙ convertible ⬙ child seats.
child’s back is against the seat back, they should use a belt-positioning booster seat. The child and booster seat are held in the vehicle by the lap/shoulder belt.
Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, befor e you buy it.
• Buckle the child into the seat according to the child restraint manufactur er’s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Don’t leave it loose in the vehicle.
When using the tether anchorages in the outboard seat- ing positions, ensure that the strap is r outed over the top of the seatback and under the head restraint between the head restraint posts.
W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Child restraint systems having attachments designed to connect to the lower anchorages are now available.
seat belt is tucked behind the child restraint and out of reach. If the buckled seat belt interfer es with the child restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it.
In general, you will first loosen the adjusters on the lower straps and tether straps so that you can more easily attach the hook or connector to the lower anchorages and tether anchorages. Then tighten all three straps as you push the child restraint r earward and downwar d into the seat.
infant carrier in a vehicle without rear seats. In an accident, serious injury or death may occur from the deploying passenger air bag. This vehicle is equipped with a child restraint tether anchor located on the floor , behind the front passenger seat.
F ACING TO THE REAR IN A VEHICLE EQUIPPED WITH THE REAR SEA T DELETE FEA TURE (Com- mercial V ehicles Only). When a convertible seat is properly installed forwar d facing, the vehicle seat should be adjusted to the rear most position.
2. Extend the child r estraint tether anchor forward to- wards the fr ont passenger seat. 3. Follow the child r estraint manufacturer’s directions for proper use of connecting the child r estraint to the extended tether strap.
6. Using the hook attached to the child r estraint tether strap, attach the child restraint tether strap to the metal ring on the vehicle tether anchor . 7. Following the child seat manufactur er’s instructions, tighten the child restraint tether strap.
W ARNING! The vehicle tether anchor is designed to be used with a child restraint only . It should not be used for any other purpose. Before use inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads.
SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow the safety tips below .
Airbag Light The light should come on and remain on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON. If the LED is not lit during starting, have it checked. If the light stays on or comes on while driving, have the system checked by an authorized dealer .
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................... 9 6 ▫ Inside Day/Night Mirror ................. 9 6 ▫ Automatic Dimming Mirror — If Equipped .... 9 6 ▫ Driver’s Side Outside Mirror Auto Dimmer — If Equipped .
▫ Advanced Phone Connectivity ............ 1 1 5 ▫ Things Y ou Should Know About Y our UConnect™ System ............................. 1 1 6 ▫ General Information ................... 1 2 3 䡵 Seats ................................ 1 2 3 ▫ Manual Front & Second Row Seat Adjuster .
䡵 Lights ............................... 1 5 0 ▫ Interior Lights ....................... 1 5 1 ▫ Park Lights .......................... 1 5 1 ▫ Headlights .......................... 1 5 1 ▫ Automatic Headlights — If Equipped ....... 1 5 3 ▫ Daytime Running Lights (Canada/Fleet V ehicles Only) .
▫ T o Accelerate For Passing ............... 1 6 6 䡵 Overhead Console — If Equipped ........... 1 6 7 ▫ Courtesy/Reading Lights ................ 1 6 8 ▫ Sunglass Storage ...................... 1 6 8 ▫ Compass/T emperature Display .........
▫ Rear Cupholders ...................... 1 8 8 䡵 Storage .............................. 1 9 0 ▫ Front Seat Storage Bin — If Equipped ....... 1 9 0 ▫ Second Row Seat Storage Bins — If Equipped ......................... 1 9 0 ▫ Overhead Rail System — If Equipped .
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Driver’s Side Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you.
W ARNING! V ehicles and other objects seen in a passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object.
Select a mirror and pr ess one of the four arrows for the direction you want the mirr or to move. Driver’s power mirror pr eselected positions can be con- trolled by the optional Driver Memory Seat Featur e. Refer to “Driver Memory Seat” in section 3 of this manual.
HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ).
The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features.
• Prior to giving a voice command, one must wait for the voice on beep, which follows the ⬙ Ready ⬙ prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing.
Pair (Link) UConnect™ System to a Cellular Phone T o begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. NOTE: The UConnect™ system use requir es a cellular phone equipped with the Bluetooth ⬙ Hands-Free Pr ofile, ⬙ version 0.
• Y ou will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority . Y ou can pair up to seven cellular phones to your UConnect™ system. However , at any given time, only one cellular phone can be in use, connected to your UConnect™ System.
you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook.
four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose.
• T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name, and then say ⬙ Call. ⬙ NOTE: the user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call.
Making a Second Call while Current Call in Progress T o make a second call while you are curr ently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call.
Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial.
• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance.
When calling a number with your UConnect™ system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word ⬙ Send.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measur es).
Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc.
Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously pair ed to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin.
training mode, follow one of the two procedur es: From outside the UConnect mode (e.g. from radio mode), • Press and hold the ‘V oice Recognition’ button for 5 seconds until the session begins, or • Press the ‘V oice Recognition’ button and say ⬙ Setup, V oice T raining ⬙ command.
• Even though the system is designed for users speaking in North American English, Fr ench, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system, such as voice mail, or when sending a page at the end of speaking the digit string, make sure to say ⬙ send.
• Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume. Bluetooth Communication Link Occasionally , Cellular phones have been found to lose connection to the UConnect™ system.
120 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 121 3.
122 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
North American English Primary Alternate(s) Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up Phone settings phone set up General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched. W ARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control.
CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.
Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for the heated seats ar e located on the instrument panel above the radio. Y ou may choose LOW , HIGH or No Heat. The switch position as well as an indicator light will show when the LOW or HIGH heat is ON.
Manual Reclining Seats — If Equipped The recliner mechanism contr ol is on the outboard side of the seat. T o recline, lean forwar d slightly , lift the lever , then push back to the desired position and r elease the lever . Lean forward and lift the lever to r eturn the seatback to its normal position.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
Middle Rear Bench Seat Recline — If Equipped Pull up on the handle located on the side of the seat to release the seatback. This allows the seatback to be either reclined or folded forwar d.
T o Fold Second Row Seats 1. Lower the head r estraint and raise the armrests on the second row seat. 2. Slide storage bin locking mechanism to the ⬙ Locked ⬙ position and then pull up on the storage bin latch to open cover . 3. Pull up on the seatback r ecliner lever located on the outboard side of the seat and fold the seatback down.
NOTE: The cupholder must be in the closed position before the seat can be tumbled into the floor . 4. Pull r earward on the release strap located at the r ear of the seat and tumble the seat forward into the storage bin. 5. Close the storage bin cover .
CAUTION! NOTE: The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover . T o Unfold Second Row Seats 1. Slide storage bin locking mechanism to the ⬙ Locked ⬙ position and then pull up on the storage bin latch to open cover .
4. Close the storage bin cover and adjust the head restraint to the desir ed position. T o Fold Third Row Seats 1. Lower the head r estraint to its full down position. 2. Pull r elease strap marked “1” located on the rear of the seat to lower the seatback.
3. Pull r elease strap marked “2” to release the anchors. 4. Pull r elease strap marked “3” and tumble the seat rearwar d into the storage bin. T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
2. Pull r elease strap marked “1” to unlock the recliner . 3. Pull r elease strap marked “3” to return the seatback to its full upright position.
W ARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. T ailgate Mode 1. Pull r elease strap “2”, then pull release strap “3” to rotate the entir e seat rearwar d.
W ARNING! T o avoid serious injury or death, never operate the vehicle with occupants in the third row seat, while in the tailgate mode. Easy Access Seating The passenger’s and driver’s side second row seats can be tilted forward for easy access to the thir d row seat or rear car go area.
T o tilt the seat on vehicles equipped with Stow ’n Go seating, pull forward on the r elease strap located on the front of the seat between the seat back and seat cushion and tilt the seat fully forward. T o return the seat, lower the seat and ensure that it is fully latched.
4. Pull up on the r elease handle and tumble the seat fully forward. Seatback Release Lever Seat Release Handle UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 139 3.
5. Pull the r elease bar located at the bottom front edge of the seat to disengage the front attachments. 6. The seat assembly can now be r emoved from the vehicle and moved on its Easy Out 威 Rollers.
50/50 Fold & T umble Rear Seat Removal 1. Lower the head r estraint and pull up on release lever “1” to fold the seatback down. 2. Pull up on r elease lever “2” and tumble the seat fully forward.
3. Pull the r elease strap “3” located at the bottom of the seat to disengage the front attachments. 4. The seat assembly can now be r emoved from the vehicle and moved on its Easy Out 威 Rollers.
2 – Passenger and 3 – Passenger Bench Seats Release levers are located on the r ear leg assemblies, near the floor . T o remove the seat, squeeze each r elease handle and rotate downwar ds to deploy the wheels. A lock indicator button pops up when the seat is unlocked.
W ARNING! If not properly latched, the bench seats could be- come loose. Personal injuries could result. After reinstalling these seats, be sure the red indicator button on the release handles return into the handles.
The release lever is below the seat and is accessible fr om the front and back of the seat. Rear Seat Descriptions 7 Passenger Model — 2– passenger bench or bucket seats in the second position and 3– passenger bench seat or 50/50 bench seat in the third position.
1. Normal Seating— The 2nd and 3rd r ow seats are installed. The 3r d row bench seat is in the full rear position on the tracks. 2. Incr eased Storage— Increased storage ar ea is provided by adjusting 3r d row bench seat to the intermediate track position.
Rear Quad and 50/50 Seating Flexibility The seats may be used with either or both seatbacks folded forward for additional storage space, or with either or both seats removed fr om the vehicle. Both 50/50 seats may also be moved to the 2nd row seating position when the middle quad seats are r emoved.
NOTE: Driving with the 2nd-row seats in the tumbled position is not recommended when passengers occupy the 3r d row seats. This position is intended only to increase available cargo ar ea without requiring r emoval of the seats.
W ARNING! • Not all head restraints in this vehicle are the same. Head restraints from one seating position should not be removed and installed in any other seating position. In a collision, serious injury or death may result if the proper head restraint is not installed on each seat.
Next, push to the left the safety catch located under the front edge of the hood, near the center . Use the hood prop r od to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 30 cm (12 inches) and then drop it.
Interior Lights Interior lights are turned on when a door or liftgate is opened, the keyless entry transmitter is activated, or when the dimmer control is moved to the extr eme top. The interior lights will automatically turn off in about 15 minutes if any of the following occur .
Dimmer Control W ith the park lights or headlights on, rotating the dimmer contr ol for the interior lights on the in- strument panel upwar d will in- crease the brightness of the instr u- ment panel lights.
Automatic Headlights — If Equipped This system automatically turns your headlights ON or OFF based on ambient light levels. T o turn the system ON, turn the headlight switch to the extreme counter - clockwise position. When the sys- tem is ON, the Headlight T ime Delay feature is also ON.
OFF or AUTO, the lights will turn of f automatically until the next cycle of the ignition switch or headlight switch. The battery protection featur e will be disabled if the ignition switch is turned to any other position other than LOCK during the 3 minute delay .
MUL TIFUNCTION LEVER T urn Signals Move the Multifunction Lever up or down and the arrows on each side of the base instr ument cluster or Information Center flash to indicate proper operation of the front and r ear turn signal lights. Y ou can signal a lane change by moving the lever partially up or down.
Headlight Low/High Beam Selector Switch Pull the multifunction lever toward the steering wheel to switch the headlights between HIGH and LOW beam. Passing Light Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steer - ing wheel.
wipers will operate for several seconds after the lever is released, and then r esume the intermittent interval pre- viously selected. If the end of the lever is depressed while in the OFF position, the wipers will operate for approximately two wipe cycles, then turn OFF .
TIL T STEERING COLUMN — IF EQUIPPED T o tilt the column, pull the small lever , located behind the turn signal control, towar d you and move the wheel up or down, as desired. Release the lever to lock the wheel firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
T o turn the system back ON, press the switch a second time until the TRAC OFF indicator turns OFF . NOTE: • The T raction Control System indicator comes on each time the ignition switch is turned ON. This will occur even if you used the switch to turn the system OFF .
When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper . Objects can be detected from up to 59 inches (150 cm). A warning display above the rear window provides both visible and audible warnings indicating the distance of the object.
W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in. (150 cm) Y ellow None 2nd LED 47 in. (120 cm) Y ellow None 3rd LED 39 in. (100 cm) Y ellow None 4th LED 31.5 in. (80 cm) 31.
W ARNING! • Drivers must be careful when backing up even when using the Rear Park Sense System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up.
NOTE: • Ensure that the r ear bumper is free of dirt and debris to keep the system operating properly . • Jackhammers, large tr ucks, and other vibrations could affect the performance of the system.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control System is ON.
T o Activate: Push the “ON/OFF” button once and the CRUISE indi- cator located below the instrument cluster odometer will illuminate showing the electronic speed contr ol system is on. T o turn the system OFF , push the “ON/OFF” button again and the system and indicator will turn off.
T o V ary the Speed Setting: When the speed control is set, speed can be incr eased by pressing and holding the “RESUME/ACCEL” button. When the button is released, a new set speed will be established. T apping the “RESUME/ACCEL” button once will result in a 2 mph (3 km/h) speed increase.
W ARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery .
Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn these lights on. Pr ess a second time to turn the lights off. The lights also turn on when a front door , a sliding door or the liftgate is opened.
Automatic Compass Calibration This compass is self calibrating which eliminates the need to manually set the compass. When the vehicle is new , the compass may appear erratic and the “CAL” symbol will be displayed.
Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set.
T o set the variance: T urn the ignition switch ON and set the display to Comp/T emp. On vehicles equipped with a Compass/Mini T rip Computer press the RESET button for approximately 5 seconds. On vehicles equipped with Compass/T emp press and hold the C/T and US/M buttons for 5 seconds.
• Step Button Push this button to cycle through all the Compass/Mini- trip Computer displays. • US/M Button Press this button to convert the display fr om U.S. to metric. T o Reset The Display Pressing the Reset button once will clear the r esettable function currently being displayed.
• CHECK TPM SYSTEM (Refer to ”T ire Pressur e Moni- tor System” in the “Starting And Operating, T ire Section”) • MEMOR Y SEA T DISABLED (Not in Park) — If Equipped • ADJUST ABLE PEDAL.
US or Metric Pressing the “STEP” button when in this display selects US or Metric. The overhead console and climate contr ol displays will be in the selected units. Service Interval When this feature is selected a service interval between 2,000 miles (3 200 km) and 6,000 miles (9 600 km) in 500 mile (800 km) increments may be selected.
Remote Unlock Driver’s Door 1st When this feature is selected only the driver’s door will unlock on the first press of the r emote keyless entry unlock button and requir e a second press to unlock the remaining locked doors and liftgate.
Flash Lights On Lock/Unlock? When this feature is selected, the fr ont and rear turn signals will flash when the doors are locked or unlocked using the remote keyless entry transmitter . This feature may be selected with or without the sound horn on lock feature selected.
radio, power vent windows, power outlets, and remov- able center console, when the ignition switch is turned off or until the key is removed and either fr ont door is opened.
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run the vehicle’s exhaust while training the transceiver . Exhaust gas can cause seri- ous injury or death. W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver .
2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons while keeping the indicator light in view . 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons.
NOTE: T o program the r emaining two HomeLink but- tons, begin with ⬙ Programming ⬙ Step T wo. Do not repeat Step One. NOTE: If your hand-held transmitter appears to pro- gram the universal transc.
Canadian Programming/Gate Programming Canadian radio-frequency laws r equire transmitter sig- nals to ⬙ time-out ⬙ (or quit) after several seconds of transmission which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law , some U.
• Press and hold the two outer HomeLink buttons until the indicator light begins to flash-after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds. HomeLink is now in the train (or learning) mode and can be programmed at any time beginning with ⬙ Programming ⬙ - Step T wo.
In the event that you are still having pr ogramming difficulties, questions, or comments, contact HomeLink at: www .homelink.com or 1-800-355-3515 . POWER SUNROOF — IF EQUIPPED The power sunroof contr ol is located between the sun visors on the overhead console.
T o close the sunroof, hold the switch in the forwar d position. Again, any r elease of the switch will stop the movement and the sunroof will r emain in a partial open condition until the switch is pushed forward again. The sunshade can be opened manually .
the rear windows open, open the fr ont and rear windows together to minimize the buffeting. If the buf feting occurs with the sunroof open, adjust the sunr oof opening to minimize the buffeting or open any window . Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel.
The lower outlet is protected by an automatic r eset circuit breaker . The automatic circuit br eaker restores power when the overload is removed. The cir cuit breaker also supplies power to the outlet in the removable floor console, when in the front position.
CONVENIENCE TRA Y DRA WER AND CUP HOLDERS Instrument Panel Cup Holders The instrument panel cupholders ar e located in a pull out drawer just below the climate controls. When the drawer is pulled out firmly , the arms of the cupholders will spring out.
Convenience T ray And Optional Smoker’s Package Kit Located between the instrument panel cupholders is a convenience tray that has been designed to hold miscel- laneous small items. NOTE: The convenience tray should never be used for ashes without the optional ash receiver in place.
NOTE: • The quad seat cupholders will remain upright if the seat is tilted forward. • The quad seat cupholders are designed to br eak away if stepped on. T o return the cupholder to its normal position, simply push the cupholder up to snap it into place.
STORAGE Front Seat Storage Bin — If Equipped The storage bin is located under the front passenger’s seat. If equipped with a lock, it can be locked with the ignition key .
Pull up on the storage bin latch to open the cover . Slide the storage bin locking mechanism to the ⬙ Unlocked ⬙ position to allow greater access to the storage bin. CAUTION! NOTE: The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover .
T o Remove Storage Bins 1. Support the bin with one hand and pull the latch handles out. 2. T wist the latch handles a 1 ⁄ 4 turn and pull outward to disengage the bin from the rail. 3. Remove the storage bin. NOTE: Make sure the latch handle pops out befor e removing the storage bin.
twist a 1 ⁄ 4 turn to attach the bin to the rail. Push the latch handle down to lock the storage bin in place. W ARNING! In a collision, you or others in your vehicle could be injured if the storage bins are not properly latched to the Overhead Rail System.
T o reinstall the console, open the console lid and r emove the storage tray . Pull up on the release handle and slide the console forward to engage the fr ont of the console into the floor tray . Pivot the floor console down until it is seated on the floor tray and release the handle.
T o remove the console use the following pr ocedure: 1. Open the r ear lid and remove the storage tray . 2. Pull up on the r elease handle located inside the floor console to disengage the floor console, reinstall the storage tray and close the rear lid.
T o reinstall the console, r emove the rubber mat and relocate to the alternate floor tray , slide the console forward to engage the fr ont of the console into the floor tray . Rapidly push down on the rear of the console with enough force to engage the latch, you should hear the latch “snap” into place.
2. Plug in the power cor d for the cellular phone into the outlet located in the bottom of the forward console bin and reinstall the cell phone holder . 3. Place the cell phone into the holder . CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.
Rear Compartment Storage Bins Y our vehicle may be equipped with open storage bins located in each rear trim panel. Cargo/T ub Net A car go/tub net is available on vehicles equipped with Stow ’n Go Seating. The cargo net fits in the second r ow storage bin or the third r ow tub.
ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 68 kg (150 lbs), and should be uniformly distributed over the luggage rack crossbars. Distribute cargo weight evenly on the r oof rack crossbars.
T o move the cross bars, loosen the thumb scr ews located at the upper edge of each cross bar appr oximately six turns, then move the cross bar to the desir ed position, keeping the crossbars parallel to the rack frame. Once the cross bar is in place, r etighten the thumb screws to lock the cross bar into position.
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panels And Controls ............ 2 0 8 䡵 Base Instrument Cluster .................. 2 0 9 䡵 Instrument Cluster W ith T ach .............. 2 1 0 䡵 Instrument Cluster Descriptions .....
▫ PTY (Pr ogram T ype) Button .............. 2 2 3 ▫ Balance ............................ 2 2 5 ▫ Fade .............................. 2 2 5 ▫ T one Control ........................ 2 2 5 ▫ AM/FM Selection ..................... 2 2 5 ▫ Scan Button .
▫ T ime Button ......................... 2 3 1 ▫ Scan Button ......................... 2 3 1 ▫ CD Changer Control Capability — If Equipped ......................... 2 3 1 䡵 Sales Code REV — AM & FM Stereo Radio W ith CD Player And CD/DVD Changer Controls .
▫ Operating Instructions — Radio ........... 2 5 8 ▫ Clock Setting Procedur e................. 2 5 8 䡵 6 Disc CD/DVD Changer (RDV) — If Equipped . 259 ▫ Operating Instructions — CD/DVD Changer . . 260 ▫ Eject (EJT) Button .............
䡵 Radio Operation And Cellular Phones ........ 2 7 4 䡵 Remote Sound System Controls — If Equipped . . 275 ▫ Radio Operation ...................... 2 7 6 ▫ T ape Player ......................... 2 7 6 ▫ CD Player .......................... 2 7 6 䡵 Cassette T ape And Player Maintenance .
INSTRUMENT P ANELS AND CONTROLS 208 UNDERST ANDING YOUR INSTRUMENT P ANEL.
BASE INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 209 4.
INSTRUMENT CLUSTER WITH T ACH 210 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T ire Pressur e Monitoring T elltale Lamp — If E.
when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and r eset. CAUTION! The T ire Pressure Monitoring System (TPMS) has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your ve- hicle.
6. Door Ajar Light This light turns on if a door is not completely closed. 7. Speedometer Indicates vehicle speed. 8. Brake System W arning Light This light monitors various brake functions, including brake fluid level and parking brake application.
V ehicles equipped with Anti-Lock brakes (ABS), ar e also equipped with Electronic Brake For ce Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is requir ed.
If the ABS light is on, the brake system should be serviced as soon as possible to restor e the benefits of Anti-Lock brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer .
15. V ehicle Theft Alarm Light — If Equipped This light will flash for approximately 15 sec- onds when the vehicle theft alarm is arming. 16. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily .
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
21. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors engine and automatic transmission control systems. The light will illu- minate when the key is in the ON position before engine start. If the bulb does not come when turning the key from OFF to ON, have the condition checked pr omptly .
This is to prevent over heating of the brake system and is a normal condition. The system will remain disabled for about 4 minutes until the brakes have cooled.
25. T rip Odometer Button Press this button to change the display fr om odometer to trip odometer . The word TRIP will appear when in the trip odometer mode. Push in and hold the button for two seconds to reset the trip odometer to 0 miles or kilometers.
you understand and save you concern about these “ap- parent” malfunctions, you must understand a point or two about the transmission and reception of radio sig- nals.
SALES CODE RAZ — AM/ FM STEREO RADIO WITH CASSETTE T APE PLA YER, CD PLA YER AND CD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Operating Instructions — Radio NOTE: Power to operate the radio is controlled by the ignition switch.
T uning Press the TUNE contr ol up or down to increase or decrease the fr equency . If you press and hold the button, the radio will continue to tune until you release the button. The frequency will be displayed and continu- ously updated while the button is pressed.
Program T ype Radio Display Country Country Information Inform Jazz Jazz Foreign Language Language News News Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues R .
Pressing PTY , then SCAN will scan the FM Band and stop at all RDS stations. Each RDS station will be played for a 5 second scan once around the FM Band and stop at the last station. The PTY icon will then turn of f. Balance The Balance control adjusts the left-to-right speaker bal- ance.
T o stop the search, pr ess SCAN a second time. T o Set The Radio Push-button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button. SET 1 will show in the display window . Select the push-button you wish to lock onto this station and press and release that button.
Press the SEEK button up or down to move the track number to skip forward or backwar d 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward (FF) Press the FF button up momentarily to advance the tape in the direction that it is playing.
Pinch Roller Release If ignition power or the radio ON/OFF switch are turned off, the pinch r oller will automatically retract to pr otect the tape from any damage. When power is r estored to the tape player , the pinch roller will automatically r eengage and the tape will resume play .
If the volume control is ON, the unit will switch fr om radio to CD mode and begin to play . The display will show the track number and index time in minutes and seconds. Play will begin at the start of track one. NOTE: • Y ou may eject a disc with the radio OFF .
FF/TUNE/RW Press FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . Program Button 4 (Random Play) Press this button while the CD is playing to activate Random Play .
Time Button Press this button to change the display fr om elapsed CD playing time to time of day . Scan Button Press this button to play the first 10 seconds of each track.
CD Diagnostic Indicators When driving over a very rough r oad, the CD player may skip momentarily . Skipping will not damage the disc or the player , and play will resume automatically . As a safeguard and to pr otect your CD player , one of the following warning symbols may appear on your display .
Radio Operation Power/V olume Control Press the ON/VOL contr ol to turn the radio on. T urn the volume control clockwise to incr ease the volume. NOTE: Power to operate the radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the radio.
Program T ype Radio Display Country Country Information Inform Jazz Jazz Foreign Language Language News News Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues R .
Mode Press the MODE button to select between, AM, FM, CD, CD/DVD changer or the Satellite Radio (if equipped). When the Satellite Radio (if equipped) is selected “SA” will appear in your radio display . A disc may remain in the radio while in the Satellite or radio mode.
T o Set The Radio Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button. SET 1 will show in the display window . Select the push-button you wish to lock onto this station and press and release that button.
CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON befor e the CD player will operate. • This Radio is capable of playing compact discs (CD.
EJT — Eject Press the EJT button and the disc will unload and move to the entrance for easy removal. The unit will switch to the radio mode. If you do not remove the disc within 15 seconds, it will be reloaded. The radio mode will continue to appear .
Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported media (disc types) The MP3 file recor ding media supported by the radio are CD-ROM, CD-R and CD-R W .
Supported MP3 file formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
• Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs.
DIR Button (CD Mode For MP3 Play) Press the DIR Button to display folders, when playing an MP3 discs that have a file/folder structur e. Press DISC up (button 1) or DISC down (button 5) to move through the folders. Press the SET button to select a folder .
Listed below is the standard RCA Jack/Cable connection. Y ou may also want to refer to the manufactur e’s instructions for the corr ect colors when connecting the RCA cables.
Radio Operation Power/V olume Control Press the PWR/VOL control to turn the radio on. T urn the volume control clockwise to incr ease the volume. NOTE: Power to operate the radio is controlled by the ignition switch. It must be in the ON or ACC position to operate the radio.
T o Set The Radio Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET RND button. SET 1 will show in the display window . Select the “1–6” button you wish to lock onto this station and press and release that button.
T ime Button Press the TIME button to change the display between radio frequency and time. General Information This radio complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interfer ence, 2.
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
Scan Press the Scan button to scan thr ough each track on the CD currently playing. FF/TUNE/R W Press FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . Random Play — SET / RND Press the RND button while the CD is playing to activate Random Play .
Program T ype Radio Display Information Inform Jazz Jazz Foreign Language Language News News Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues R & B Religiou.
By pressing the SCAN button when the PTY icon is displayed, the radio will stop at every PTY station on the band and list each corresponding pr ogram type in the radio display . T ime Press the TIME button to change the display fr om elapsed CD playing time to time of day .
SALES CODE RBK — AM/ FM STEREO RADIO WITH CD PLA YER AND CD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/V olume Control Press the ON/VOL contr ol to turn the radio on. T urn the volume control clockwise to incr ease the volume.
the radio will continue to tune until you release the button. The frequency will be displayed and continu- ously updated while the button is pressed. T o Set The Radio Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET button.
Press the AUDIO button a third time and BAL will be displayed. Press the SEEK + or SEEK – to adjust the sound level from the right or left side speakers. Press the AUDIO button a fourth time and F ADE will be displayed. Press the SEEK + or SEEK – to adjust the sound level between the front and r ear speakers.
Inserting The Compact Disc CAUTION! This CD player will accept 4 3 ⁄ 4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may either insert or eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio OFF , the display will show the time of day .
FF/TUNE/R W Press FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . Random Play — RND/Program Button 4 Press the RND (button 4) button while the CD is playing to activate Random Play .
Disc Up/Program Button 1 Press the DISC up (button 1) button to play the next available disc. Disc Down/Program Button 5 Press the DISC down (button 5) button to play the previous disc. Seek Button Press the SEEK up or down to select another track on the same disc.
As a safeguard and to pr otect your CD player , one of the following warning symbols may appear on your display . A CD HOT symbol indicates the player is too hot. CD HOT will pause the operation. Play can be resumed when the operating temperature is corr ected or another MODE is selected.
stereo radio with CD capability . Refer to your “Naviga- tion User’s Manual” for detailed operating instructions. NOTE: If your vehicle is not equipped with the CD Changer option, you will not be able to use the Naviga- tion system and the CD Player simultaneously .
Changing T ime Zone 1. Highlight “Clock Setup” and pr ess ENTER. 2. At the Clock Setup scr een highlight the box next to “T ime Zone” and press ENTER. 3. Highlight the appr opriate time zone for you location and press ENTER to stor e your selection.
The CD/DVD Changer will play CD-R, CD-R W , CD- Audio and DVD V ideo disc formats. The video screen will turn on automatically once a DVD is inserted into the changer . NOTE: The ignition switch must be in the ON or ACC position before the CD/DVD changer will operate.
which numbered position the disc will be loaded into. The disc will automatically be pulled into the CD/DVD changer . 3. Upon insertion, the disc will begin to play , and the light below the loading slot will turn off. On vehicles equipped with the premium version the light above the chosen button will remain illuminated.
EJECT (EJT) Button If there is a disc in the changer , press the EJT button and the disc will eject. If you do not remove the disc within 10 seconds, it will be reloaded and the display will show P AUSE.
Remote Control Buttons 1. Headphone T ransmitter 2. Menu Up/Next T rack/Chapter 3. Menu Left/Fast Rewind 4. Return 5. Setup 6. Pause/Play 7. Mute 8. Display 9. Mode 10. Program Down - Pr evious Disc 1 1. Program Up - Next Disc 12. Slow 13. Stop 14. Menu 15.
R TN Button (4) This button only functions in CD/DVD mode. Press this button to return to the pr evious menu when in the disc menu mode. SETUP Button (5) This button only functions in CD/DVD mode. Press the button after pressing the ST OP button to access the set up menu.
SLOW Button (12) This button only functions in DVD video mode. Press this button to advance the video. If the DVD is paused, pressing this button will advance the video frame by frame. STOP Button (13) This button only functions in DVD video mode. Press this button to stop the DVD.
Remote Control Battery Service • T o replace the batteries for the r emote control slide the cover rearwar d. The replacement batteries for the r emote control ar e two AAA batteries. Operating Instructions — Video Screen Push up on the release button to lower the video scr een.
1. Screen W idth Button Changes the width of the screen pictur e. 2. Enter Button This button will enter the selection from the on-screen menu. 3. Brightness Button Changes the brightness of the screen pictur e.
Operating Instructions — Headphones 1. Power Button 2. V olume Control 3. Power Indicator Power Button Pressing the power button will turn the headphones ON/OFF . An indicator light will illuminate on the head- phone earpiece to indicate the headphones are ON.
• Replace the battery in each earpiece and reinstall the cover . The headphones requir e two AAA batteries. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
Operating Instructions — MP3 Player , Portable W alkman An MP3 player can be connected to the audio system. Connect the cables to the RCA jacks located on the front of the CD/DVD changer . NOTE: Follow the manufactures instr uctions for the correct colors when connecting the RCA cables.
SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
ESN/SID Access W ith RBU, RAZ, RB1 and RBQ Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds.
moving on to the next channel. The word ⬙ SCAN ⬙ will appear in the display between each channel change. Press the SCAN button a second time to stop the search. NOTE: Channels that may contain objectionable content can be blocked. Contact Sirius Customer Care at 888-539- 7474 to discuss options for channel blocking or unblock- ing.
PTY Button ⴖ SEEK ⴖ When the desired pr ogram is obtained, press the ⬙ SEEK ⬙ button within five seconds. The channel will change to the next channel that matches the program type selected.
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel at the 3 and 9 O’clock positions. The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system.
Radio Operation Pressing the top of the switch will SEEK up for the next listenable station and pressing the bottom of the switch will SEEK down for the next listenable station. The button located in the center of the left hand switch will tune to the next pre-set station that you have programmed in the radio pr e-set push-button.
2. Keep the cassette tape in its case to pr otect from slackness and dust when it is not in use. 3. Keep the cassette tape away fr om direct sunlight, heat and magnetic fields such as the radio speakers. 4. Before inserting a tape, make sure that the label is adhering flat to the cassette.
4. Do not use solvents such as benzine, thinner , cleaners, or antistatic sprays. 5. Stor e the disc in its case after playing. 6. Do not expose the disc to dir ect sunlight.
mode. When the blower control is set to any position other than off, it selects the amount of air deliver ed to the passenger compartment. There ar e four blower speeds.
Front Mode Control The mode control allows you to choose from several patterns of air distribution. NOTE: T o improve your selection choices, the system allows you to operate at intermediate positions between the major modes. These intermediate positions are iden- tified by the small dots.
Air comes from the outlets in the instr ument panel. Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vane knob on the center outlets down, will close off the air flow fr om the center outlets.
Air comes from both the instr ument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature lever positions, the bi- level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keep- ing the windshield clear . Defrost Mode Air comes from the windshield and side window demist outlets.
NOTE: For improved safety , the compressor is activated and the recir culation mode is deactivated when Mix or Defrost modes ar e selected. This is done to assist in drying the air and it will help in keeping the windows from fogging.
recir culation mode to rapidly cool the inside of the vehicle. The recir culation mode can also be used to temporarily block out outside odors, smoke, and dust. NOTE: • When the ignition switch is turned OFF , the recir cula- tion feature will be cancelled.
• Start the engine, and continue to hold in the “Rear W ipe/W ash” button until the indicator light starts flashing repeatedly . • Press the r ecirculation button until the indicator light remains lit. • The selection will be stored when the ignition switch is turned OFF or if the “Rear W ipe/W ash” button is pressed.
Rear Blower Control The primary control for the r ear blower is on the front climate control unit located on the instr ument panel. The center knob on the front climate contr ol unit has five positions, “REAR”, “OFF”, and a range of blower speeds.
CAUTION! Interior air enters the Manual Rear Zone Climate Control system through an intake grille located in the passenger side trim panel behind the third seat. The heater outlets are located in the passenger side trim panel just behind the sliding door .
The rear temperatur e knob and the rear blower speed can be adjusted as desired by the second seat occupants. Automatic T emperature Control — If Equipped The Infrared Thr ee-Zone Automatic T emperature Control System automatically maintains the interior comfort level desired by the driver and all passengers.
front A TC unit is in the “AUTO” position. Once the desired temperatur e is displayed, the system will achieve and maintain that comfort level automatically . When the system is set up for your comfort level, it is not necessary to change the settings.
This feature may be enabled using the following pr oce- dure: • Press and hold the Heated Rear W indow and Auto HI buttons for 5 seconds. • The “DELA Y” symbol will flash to indicate that the feature as been enabled. Power Button This button turns the entire system ON/OFF .
Panel Mode Air comes from the outlets in the instr ument panel. Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vane knob on the center outlets down, will close off the air flow fr om the center outlets.
Bi-Level Mode Air comes from both the instr ument panel outlets, floor outlets and defrost. A slight amount of air is also directed through the side window demister outlets. NOTE: In many temperature positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions.
Defrost Mode Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows. NOTE: While operating in either ⬙ Auto HI ⬙ or ⬙ Auto LO ⬙ , the system will not automatically sense the presence of fog, mist, or ice on the windshield.
the recir culation button. The recir culation mode should only be used temporarily . The recirculation symbol will illuminate in the display when this button is selected. Push the button a second time to turn off the r ecirculation icon in the display and allow outside air into the vehicle.
Operation of the rear system is quite simple. Begin by rotating the r ear system center control knob on the fr ont A TC control unit to the “REAR CONTROL” position, this illuminates an “UNLOCK” symbol in the rear display . Next, rotate the Rear Blower Contr ol and the Rear Mode Control to the “AUT O” positions.
Rear Blower Control The rear blower contr ol, located in the headliner near the center of the vehicle has an “OFF”, “AUTO” and a range of blower speeds. The rear blower contr ol knob can be manually set to “OFF” or any fixed blower speed by rotating the knob from low to high.
Rear Mode Control The Rear Mode Control, located in the headliner near the center of the vehicle can be used to select between Auto, Headliner , Bi- Level and Floor modes. Auto Mode The rear system automatically maintains the corr ect mode and comfort level desired by the r ear seat occu- pants.
glycol antifreeze coolant in water is r ecommended. Refer to section 7, Maintenance Procedur es, of this manual for proper coolant selection. W inter Operation T o insure the best possible heater and .
Operating T ips A/C Air Filter — If Equipped On vehicles equipped with Automatic T emperature Con- trol (A TC), the climate control system filters out dust and pollen from the air . Refer to section 7 “Air Conditioning” for filter replacement instr uctions.
Rear W asher Operation — Manual T emperature Control Only The controls ar e located on the Manual T empera- ture Contr ol head above the front blower contr ol.
Rear Wiper Operation — Automatic T emperature Control Only Press this button to have the r ear wiper have a continuous wipe. When the ignition switch is in the ON/RUN position, the rear wiper switch position as well as an indicator light will show that the wiper is ON.
the reservoir with windshield washer solvent (not radia- tor antifreeze) and operate the system for a few seconds to flush out the residual water . The washer fluid reservoir will hold a full gallon of fluid when the Low W asher Fluid Light illuminates.
If your vehicle is equipped with Infrared Thr ee-Zone Automatic T emperature Contr ol the rear defroster sym- bol will show in the display screen when the r ear window defroster is on.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 3 1 1 ▫ Automatic T ransmission ................ 3 1 2 ▫ Normal Starting (Above 32°F / 0°C) ........ 3 1 2 ▫ Extremely Cold W eather Starting (Below ⫺ 20°F / –29°C) .
䡵 Power Steering ........................ 3 2 5 䡵 Driving On Slippery Surfaces .............. 3 2 6 ▫ Acceleration ......................... 3 2 6 ▫ T raction ............................ 3 2 7 䡵 T ire Safety Information ................... 3 2 7 ▫ T ire Markings .
▫ T ire Pressur e Monitoring Low Pressure W arnings ........................... 3 4 9 ▫ Base T ire Pressur e Monitoring System W ith Electronic V ehicle Information Center (EVIC) — If Equipped ........................... 3 4 9 ▫ Service T ire System Soon .
▫ Replacement Parts ..................... 3 6 3 ▫ Maintenance ......................... 3 6 3 䡵 V ehicle Loading ........................ 3 6 3 ▫ V ehicle Certification Label ............... 3 6 4 ▫ Gross V ehicle W eight Rating (GVWR) .....
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! • Be sure to turn off the engine if you want to rest or sleep in your car . Accidents can be caused by inadvertently moving the gear selection lever or by pressing the accelerator pedal.
Automatic T ransmission The gear selector must be in the NEUTRAL or P ARK position before you can start the engine. Depr ess the brake pedal before shifting into any driving gear . Normal Starting (Above 32°F / 0°C) 1. Do not depr ess the accelerator .
If Engine Fails T o Start If the engine fails to start after you have followed the “Normal Starting” procedur e, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is r outed under the hood on the driver side of the vehicle.
W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
Reset Mode - Electronic T ransmission The transmission is monitored electr onically for abnor- mal conditions. If a condition is detected that could cause damage, the transmission automatically shifts into sec- ond gear . The transmission remains in second gear despite the forward gear selected.
W ARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. “R” Reverse Shift into this range only after the vehicle has come to a complete stop.
occur only to prevent engine overspeed while downshifts occur earlier than other gear range selections. NOTE: The vehicle computer will over ride Overdrive and “3” Drive ranges by changing shift points if the transmission operating temperature exceeds acceptable limits.
Be sure the parking brake is firmly set when parked and the gear shift lever is in the P ARK position. When parking on a hill you should apply the parking brake before placing the gear shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of P ARK.
When parking on a hill, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle.
W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
When the vehicle is driven over approximately 7 mph (1 1 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises ar e the system performing its self check cycle to ensure that the ABS system is working properly .
TRACTION CONTROL — IF EQUIPPED This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to pr ovide enhanced acceleration and stability .
• There is a T raction Contr ol System malfunction • The system has been deactivated to prevent damage to the brake system due to overheated brake tempera- tures NOTE: The T raction Control will make buzzing or clicking sounds when in operation.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and r oad surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1.
• European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewall beginning with the section width. The letter ⬙ P ⬙ is absent from this tir e size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.
EXAMPLE: 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.5 = Section W idth in Inches (in) R = Construction Code — ⬙ R ⬙ means Radial Construction.
EXAMPLE: —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions (i.e. tire pr essure, vehicle loading, r oad conditions, and posted speed limits).
EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of T ransportation —This symbol certifies that the tire is in compliance with the U.S. Department of T ransportation tir e safety standards, and is appr oved for highway use. MA = Code repr esenting the tire manufacturing location.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar .
This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the total weight your vehicle can carry 3) the tire size designed for your vehicle 4) the cold tire inflation pr essures for the fr ont, rear , and spare tir es.
3. Subtract the combined weight of the driver and pas- sengers from XXX kilograms or XXX pounds. 4. The r esulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb.
ST ARTING AND OPERA TING 335 5.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion.
The pressur e should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essure. Do not make a visual judgement when determining proper inflation.
Example: If garage temperature = 68 °F (20 °C) and the outside temperature = 32 °F (0 °C) then the cold tir e inflation pressur e should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every 12 °F (7 °C) for this outside temperature condition.
Cuts and punctures in radial tir es are r epairable only in the tread ar ea because of sidewall flexing. Consult your authorized tire dealer for radial tir e repairs. Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires.
CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the compact spare installed. Damage to the vehicle may result. Limited Use Spare — If Equipped The limited use spare tir e is for temporary emergency use on your vehicle.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications.
NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er’s instructions on method of installation, operating speed, and conditions for usage.
Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed. The suggested rotation method is the “forwar d-cross” shown in the following diagram.
• The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure if the tir e pressure falls below the low pressur e warning threshold for any reason, including low temperatur e effects.
Tire Pressure Monitoring Low Pressure W arnings The T ire Pressur e Monitoring T elltale Lamp will illuminate in the instrument cluster and an audible chime will be activated when one or more of the four active road tir e pressur es are low . The audible chime will sound once every ignition cycle for each low tire condition that it detects.
• Receiver Module • 4 T ire Pressur e Monitoring Sensors • V arious T ire Pr essure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • T ire Press.
Service Tire System Soon The T ire Pressur e Monitoring T elltale Lamp will flash on and off for 60 seconds in the instr ument cluster , and an audible chime will be activated when one or more of the four active road tir e pressur es are low .
CAUTION! After inspecting or adjusting the tire pressure al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the wheel rim sensor . NOTE: • The T ire Pressur e Monitoring System does not monitor the temporary spare tir e.
Pressur e Monitoring Lamp to be ON, and a Chime will sound. This sequence will repeat for every key cycle until the original TPMS tire has been pr operly repair ed (or replaced) and put back on the vehicle in place of the compact spare tir e. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
Poor quality gasoline can cause problems such as har d starting, stalling and hesitations. If you experience these symptoms, try another brand of “regular” gasoline be- fore considering service for the vehicle.
CAUTION! DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. Problems that r esult from using methanol/gasoline or E85 Ethanol blends are not the r esponsibility of the manufacturer .
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door .
NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled.
• If the problem continues, the message will appear the next time the vehicle is started. See Section 7 of this manual for more information. Make sur e that the fuel filler cap is tightened each time the vehicle is refueled.
ETHANOL FUEL (E-85) E-85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
For best results, a r efueling pattern that alternates be- tween E-85 and unleaded gasoline should be avoided. When you do switch fuels, it is recommended that • you do not switch when the fuel gaug.
Cruising Range Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel con- sumption. Y ou can expect your MPG and your driving range to decrease by about 30% compar ed to gasoline operation.
V ehicle Certification Label Y our vehicle has a certification label attached to the driver’s door pillar . The label contains the following information: • Name of manufacturer • Month and year .
Tire Size The tire size on the Label r epresents the actual tir e size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Loading T o load your vehicle properly , first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible.
A loaded vehicle is shown in the illustration. Note that neither the GVWR or the GA WR capacities have been exceeded. Example Only Front Axle Rear Axle Empty W eight 2,140 lbs (971 kg) 1,470 lbs (667 .
T o maintain warranty coverage, follow the requir ements and recommendations in this manual concerning ve- hicles used for trailer towing. Common T owing Definitions The following trailer towing relat.
W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The downward for ce exerted on the hitch ball by the trailer .
safety . The addition of a friction / hydraulic sway control also dampens sway caused by traffic and cr osswinds and contributes positively to tow vehicle and trailer stability .
T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer Hitch Classification Class III - Heavy Duty 5,000 lbs (2 268 kg) Class IV - Extra Heavy Duty 10,000 lbs (4 540 kg) All trailer hitches should be professionally installed on your vehicle.
Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.3L & 3.8L Auto- matic 6,600 lbs (2993 kg) 40 SQ. FT . (3.72 square meters) Up to 2 persons & Luggage 1,800 lbs (816 kg) 180 lbs (82 kg) 6,600 lbs (2993 kg) 40 SQ.
Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.3L & 3.8L Auto- matic with trailer tow package 8,600 lbs (3900 kg) 40 SQ. FT . (3.72 square meters) Up to 2 persons & Luggage 3,800 lbs (1723 kg)* 380 lbs (172 kg) 8,600 lbs (3900 kg) 40 SQ.
which will cause loss of control of the vehicle and trailer . Failure to load trailers heavier in fr ont is the cause of many trailer accidents. Never exceed the maximum tongue weight stamped on your bumper or trailer hitch.
T owing Requirements T o promote pr oper break-in of your new vehicle driv- etrain components the following guidelines are r ecom- mended: CAUTION! • A void towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle.
• When hauling cargo or towing a trailer , do not over- load your vehicle or trailer . Overloading can cause a loss of control, poor performance or damage to brakes, axle, engine, transmission, steering, suspension, chas- sis structur e or tires. • Safety chains must always be used between your vehicle and trailer .
T ires–General Information section of this manual on T ire Pressur es for proper tire inflation pr ocedures. − Also, check the trailer tires for pr oper tire inflation pressur es before trailer usage. − Check for signs of tire wear or visible tir e damage before towing a trailer .
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
T owing Requirements — T railer Lights & W iring Whenever you pull a trailer , regar dless of the trailer size, stop lights and turn signals on the trailer are r equired for motoring safety . The T railer T ow Package may includ ea4a n d7p i n wiring harness.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “3” range should be selected.
T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher .................. 3 8 4 䡵 If Y our Engine Overheats ................. 3 8 5 䡵 Jacking And T ire Changing ................ 3 8 6 ▫ Jacking Instructions — Stow ’n Go Seating . .
HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel above the radio. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer- gency .
IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appr opriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in neutral, but do not increase engine idle speed.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual.
Jacking Instructions — Stow ’n Go Seating Preparations For Jacking W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Jack Location — Stow ’n Go Seating The jack, jack handle and winch handle tools are stowed behind the rear left side trim panel in the r ear cargo ar ea. Pull up on the lever to release the cover . Remove the scissors jack and jack handle by rotating the small wing nut to the left.
Spare T ire Stowage — Stow ’n Go Seating For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a pr otective cover located under the center of the vehicle by means of a cable winch mecha- nism. The “spare tir e drive” nut is located on the floor , under a plastic cap between the front seats.
Jacking Instructions — Stow ’n Go Seating 1. Loosen (but do not r emove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. T o remove the compact spar e tire/cover assembly , assemble the winch handle extensions to form a “T’ and fit the winch “T” handle over the drive nut.
CAUTION! The winch mechanism is designed for use with the winch “T” handle only . Use of an air wrench or other power tools is not recommended and can damage the winch. 3. Assemble the winch handle extensions to form the Spare T ire Hook and pull the compact spar e tire/cover assembly from under the vehicle.
4. When the compact spar e tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright and remove the wheel spacer by squeezing the two r etaining tabs together . 5. Ther e are two jack engagement locations on each side of the body , refer to the following illustration.
Jack Engagement Locations WHA T TO DO IN EMERGENCIES 393 6.
6. These locations ar e on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location.
10. Lower the vehicle by turning the jack scr ew to the left. 1 1. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft.
15. Stow the jack, jack handle and winch handle tools. 16. Check the compact spare tir e pressur e as soon as possible. Correct pr essure as r equired.
W ARNING! A loose compact spare tire/cover assembly , thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the com- pact spare tire with the cover assembly in the place provided. CAUTION! The winch mechanism is designed for use with the winch “T” handle only .
2. Assemble the winch handle extensions to form the Spare T ire Hook and pull the wheel spacer fr om under the vehicle. 3. T urn the compact spare tir e so that the valve stem is down and place the tire into the spar e tire cover assem- bly .
CAUTION! For vehicles equipped with Stow ’n Go seating, the W inch Mechanism is designed specifically to stow a COMP ACT Spare T ire ONL Y . Do not attempt to use the W inch to stow the Full Size ’Flat’ T ire, or any other Full Size T ire. V ehicle damage may result.
Jack Location — Non Stow ’n Go Seating The jack, jack handle are stowed behind the r ear left side trim panel in the rear car go area. Pull up on the lever to release the cover . Remove the spare wheel, scissors jack and jack handle from stowage by r otating the wing nut to the left.
Jacking Instructions — Non Stow ’n Go Seating 1. Loosen (but do not r emove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground.
Jack Engagement Locations 402 WHA T TO DO IN EMERGENCIES.
5. These locations ar e on the sill flange of the body and consist of a pair of downstanding tabs. The jack is to be located, engaging the flange, between the pair of tabs closest to the wheel to be changed. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location.
NOTE: Do not install the wheel cover on the compact spare. Do not use a hammer or force to install the wheel covers. 9. Lower the vehicle by turning the jack scr ew to the left. 10. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage.
• For convenience in checking the spare tir e inflation, stow with the valve stem toward the r ear of the vehicle. • Using the jack handle, rotate the drive nut to the right until the wheel is drawn into place against the underside of the vehicle.
Check the Battery T est Indicator (if equipped). If a light or bright colored dot is visible in the indicator (if equipped), DO NOT jump-start the battery .
W ARNING! Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck.
CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • Always use wheel lift equipment when towing from the front. The only other approved method of towing is with a flat bed truck.
TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Flat towing of vehicles equipped with an automatic transmission, is only permitted within the limitations described in this section.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 2.4L Engine ........................... 4 1 4 䡵 3.3L/3.8L Engines ...................... 4 1 5 䡵 Onboard Diagnostic System — OBD II ........ 4 1 6 ▫ Loose Fuel Filler Cap Message ............ 4 1 6 䡵 Emissions Inspection And Maintenance Programs .
▫ Front Suspension Ball Joints .............. 4 3 0 ▫ Steering Shaft Seal .................... 4 3 1 ▫ Steering Linkage ...................... 4 3 1 ▫ Drive Shaft Universal Joints .............. 4 3 1 ▫ Body Lubrication .....................
▫ Rear T ail, Stop, T urn Signal, Side Marker And Back-Up Lights ....................... 4 5 9 ▫ Center High Mounted Stop Light (CHMSL) . . . 460 ▫ License Light ........................ 4 6 1 䡵 Fluids And Capacities ................... 4 6 1 䡵 Fluids, Lubricants And Genuine Parts .
2.4L ENGINE Engine Compartment 2.4L Engine 414 MAINT AINING YOUR VEHICLE.
3.3L/3.8L ENGINES Engine Compartment 3.3L/3.8L Engines MAINT AINING YOUR VEHICLE 415 7.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tightened. Pr ess the odometer reset button to turn the message of f. If the problem persists, the message will appear the next time the vehicle is started.
4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Appr oximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine.
DEALER SERVICE Y our dealer has the qualified service personnel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pr ocedure yourself.
Engine Oil Checking Oil Level T o assure pr oper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures ar e below 32°F (0°C). • Stop and Go driving. • Extensive engine idling.
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only r ecommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) — 2.
Synthetic Engine Oils There ar e a number of engine oils being promoted as either synthetic or semi-synthetic. If you chose to use such a product, use only those oils that ar e American Petroleum Institute (API) Certified and have the r ecom- mended SAE viscosity grade.
Belts should be inspected for evidence of cuts, cracks, or glazing, and replaced if ther e is indication of damage which could result in belt failur e. If adjustment is re- quired, the belts must be adjusted accor ding to the specifications and procedur es described in the Service Manual.
W ARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed.
NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your ex- haust system.
• Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently sealed.
CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
the black arrow on the bottom of the filter frame with the direction of airflow (away fr om the blower motor and towards the center of the car). Refer to the “Maintenance Schedules” section of this manual for the recommended air conditioning filter replacement intervals.
Steering Shaft Seal The steering shaft seal, at the point where the shaft passes through the bulkhead, is lubricated when it is installed. If the seal becomes noisy when the steering shaft is turned, it should be lubricated with a multi-purpose grease.
The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant directly into the lock cylinder .
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, .
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner .
Adding Engine Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same coolant throughout the life of your vehicle.
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
The radiator normally remains completely full, so ther e is no need to remove the radiator cap unless checking for coolant freeze point or r eplacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month.
• Make sure that the radiator and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency .
replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failur e. W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately .
W ARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter or moisture.
The dipstick is located just behind the radiator , lower right side. Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only manufacturers r ecommended transmis- sion fluid, refer to Fluids, Lubricants and Genuine Parts for correct fluid type.
Procedure For Checking Fluid Level The fluid level in the automatic transmission should be checked whenever the vehicle is serviced. Operation with an improper fluid level will gr eatly reduce the life of the transmission and of the fluid. T o properly check the automatic transmission fluid level, the following procedur e must be used: 1.
CAUTION! Do not overfill. Dirt and water in the transmission can cause serious damage. T o prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is reseated properly .
Front And Rear Wheel Bearings Front and r ear wheel bearings are permanently sealed. No regular maintenance is r equired for these compo- nents. Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage.
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar or other similar deposits have accumu- lated on your vehicle, use Mopar Super Kleen Bug and T ar Remover to remove.
• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
Y our leather upholstery can be best preserved by r egular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed pr omptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and Mopar T otal Clean.
equipped with electric defrosters or the right r ear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rear view mirr or , spray cleaner on the towel or rag that you are using.
Press the stop tab, slide the entir e drawer out and remove it from the instr ument panel. Cleaning Soak the drawer , with the drawer front facing up, in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately one hour .
FUSES — INTEGRA TED POWER MODULE An Integrated Power Module (IPM) located in the engine compartment near the battery . This center contains car- tridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover .
Cavity Cartridge Fuse Description F28 40 Amp Green Power W indows F30 40 Amp Green Headlight W ashers (Export Only) F31 40 Amp Green Power Sliding Door F32 40 Amp Green Power Liftgate Cavity Mini Fuse.
Cavity Mini Fuse Description F21 25 Amp Natural Anti-Lock Brake System (ABS) Module F23 10 Amp Red Ignition Switch F24 20 Amp Y el- low Hazard F26 20 Amp Y el- low Stop Lamp F33 15 Amp Blue Front/Rear.
The Heated Mirrors, Lower Instr ument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self r esetting fuses that are only serviceable by an authorized dealer . The power seats are fused by a 30 Amp circuit br eaker located under the driver’s seat.
NOTE: For lighted switches, see your dealer for replace- ment instructions. All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS — Exterior Bulb Number Back-up, T ail, Stop, T urn Signal, & Sidemarker .
2. T urn the bulb socket retaining ring or the bulb assem- bly counterclockwise. 3. Disconnect the electrical connector and r eplace the bulb. NOTE: On some vehicles it may be necessary to slide the red r elease lock rearwar d and push forward on the connector while depressing the r elease tab.
Front Park/T urn Signal and Sidemarker Lights 1. Remove the thr ee screws securing the headlight mod- ule. 2. T wist the turn signal socket to remove fr om the headlight module and pull bulb from socket. 3. Replace bulb, reinstall socket and then reinstall the headlight module.
Fog Lights 1. Reach behind the fr ont fascia from under the vehicle. 2. T wist the front fog light bulb to r emove from the fog light housing. 3. Disconnect the electrical connector and r eplace the bulb. CAUTION! Do not touch the new bulb with your fingers.
3. Squeeze the socket assembly tabs to r emove it from the housing. 4. Pull the bulb to r emove it from the socket. 5. Replace the bulb, r einstall the socket, and reattach the light assembly . Center High Mounted Stop Light (CHMSL) 1. Remove the two scr ews securing the CHMSL.
4. Replace the bulb, r einstall the socket and reattach the CHMSL. License Light 1. Remove the two lens assembly mounting scr ews. 2. Pull the bulb out of the socket. Replace the bulb and reattach the lens assembly . FLUIDS AND CAP ACITIES U.S. Metric Fuel 20 Gallons 76 Liters Engine Oil-with filter 2.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent 2.4 Liter Engine Oil Use API Certified SAE 5W -30 engine oil.
Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 4 6 6 䡵 Maintenance Schedules ................... 4 6 6 ▫ Schedule “B” .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• T axi, police, or delivery service (commercial ser - vice). 〫 • Off-r oad or desert operation. • If equipped for and operating with E-85 (ethanol) fuel. NOTE: Most vehicles are operated under the conditions listed for Schedule ⬙ B ⬙ . Use the schedule that best describes your driving condi- tions.
Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed.
SCHEDULE “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 96 000 km (60,000 miles) if the vehicle is usually operated under one or more of the conditions marked with an 〫 .
Miles 3, 000 6, 000 9, 000 12, 000 15, 000 18, 000 (Kilometers) (5 000 ) (10 000 ) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires XX X Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 21, 000 24, 000 27, 000 30, 000 33, 000 36, 000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires XX X Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 39, 000 42, 000 45, 000 48, 000 51, 000 54, 000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires XX X Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 57, 000 60, 000 63, 000 66, 000 69, 000 72, 000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires XX X Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 75, 000 78, 000 81, 000 84, 000 87, 000 90, 000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter . XXXXX X Rotate T ires XX X Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 93, 000 96, 000 99, 000 102, 000 105, 000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter . XXXX X Rotate T ires XX Inspect the brake linings. X Inspect the engine air cleaner filter , replace if neces- sary .
Miles 108, 000 1 1 1, 000 1 14, 000 1 17, 000 120, 000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter . XXXXX Rotate T ires XXX Inspect the brake linings. XX Inspect the engine air cleaner filter , replace if necessary .
Miles 108, 000 1 1 1, 000 1 14, 000 1 17, 000 120, 000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary . ‡ X Change the automatic transmission fluid and filter .
SCHEDULE “A” Miles 6, 000 12, 000 18, 000 24, 000 30, 000 36, 000 (Kilometers) (10 000) (20 000) (30 000) (40 000 ) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Rotate T ires X XXXXX Inspect the brake linings.
Miles 42, 000 48, 000 54, 000 60, 000 66, 000 72, 000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X XXXX Rotate T ires X X XXXX Inspect the brake linings.
Miles 42, 000 48, 000 54, 000 60, 000 66, 000 72, 000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary .
Miles 78, 000 84, 000 90, 000 96, 000 (Kilometers) (130 000) (140 000) (150 000) (160 000) [Months] [78] [84] [90] [96] Change engine oil and engine oil filter . XX X X Rotate T ires XX X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace if necessary .
Miles 102, 000 108, 000 1 14, 000 120, 000 (Kilometers) (170 000) (180 000) (190 000) (200 000) [Months] [102] [108] [1 14] [120] Change engine oil and engine oil filter . XX X X Rotate T ires XX X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace if necessary .
Miles 102, 000 108, 000 1 14, 000 120, 000 (Kilometers) (170 000) (180 000) (190 000) (200 000) [Months] [102] [108] [1 14] [120] Inspect the serpentine drive belt on 3.3 liter and 3.8 liter engines, replace if necessary . ‡ XX Flush and replace the engine coolant at 120 months, if not done at 102,000 miles.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 8 6 ▫ Prepar e For The Appointment ............ 4 8 6 ▫ Prepar e A List ........................ 4 8 6 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer .
T ransport Canada, Motor V ehicle Defect Investigations and Recalls, 2780 Sheffield Road, Ottawa, Ontario K1B 3V9. PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted.
• Owner’s Manuals. These manuals have been prepar ed with the assistance of service and engineering specialists to acquaint you with specific Chrysler group vehicles. Included ar e starting, operating, emergency and maintenance pr o- cedures as well as specifications, capabilities and safety tips.
may depart significantly from the norm due to variations in driving habits, service practices and differ ences in road characteristics and climate. T raction Grades The traction grades, from highest to lowest, ar e AA, A, B, and C.
W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
.
INDEX 10.
Adding Fuel ........................... 3 5 7 Adding W asher Fluid .................. 303,432 Additives, Fuel ......................... 3 5 5 Adjustable Pedals ....................... 1 6 3 Air Conditioner Maintenance ............... 4 2 8 Air Conditioning .
Reset Mode .......................... 3 1 7 Selection Of Lubricant ................ 443,463 Shifting ............................. 3 1 7 Special Additives ...................... 4 4 5 Automatic T ransmission ................... 4 4 2 Adding Fluid ....
Oil (Engine) .......................... 4 2 2 Radiator (Coolant Pressur e) ............... 4 3 6 Car W ashes ............................ 4 4 7 Carbon Monoxide W arning ................. 3 5 6 Cargo Compartment Luggage Carrier ....................... 1 9 9 Cargo (V ehicle Loading) .
Compass V ariance ....................... 1 7 0 Computer , T rip/T ravel .................... 1 7 1 Console, Overhead ....................... 1 6 7 Console, Removable ................... 193,194 Contract, Service ........................ 4 8 8 Coolant Pressur e Cap (Radiator Cap) .
Door Ajar Light ......................... 2 1 3 Door Locks ............................. 2 7 Door Locks, Automatic .................... 2 9 Door Opener , Garage ..................... 1 7 7 Drive Belts ............................ 4 2 3 Drive Shaft Universal Joints .
Oil Selection ....................... 421,461 Oil Synthetic ......................... 4 2 3 Overheating .......................... 3 8 5 T emperature Gauge ..................... 2 1 6 Event Data Recorder ...................... 7 3 Exhaust Gas Caution .
Fold in Floor (Stow ⬘ n Go) Seating ........... 1 2 9 Freeing A Stuck V ehicle ................... 4 0 7 Fuel ................................. 3 5 3 Adding ............................. 3 5 7 Additives ............................ 3 5 5 Clean Air .
Head Phones ........................... 2 6 8 Head Restraints ......................... 1 2 5 Headlights ............................ 1 5 1 Bulb Replacement ...................... 4 5 6 High Beam/Low Beam Select Switch ........ 1 5 6 Lights On Reminder .
Jack Location .................. 388,390,400,401 Jack Operation .................... 386,390,401 Jacking Instructions ................... 390,401 Jump Starting .......................... 4 0 5 Key , Programming ........................ 1 7 Key , Replacement .
Headlights On Reminder ................. 1 5 3 High Beam Indicator .................... 2 1 7 High Beam/Low Beam Select ............. 1 5 6 Illuminated Entry ....................... 2 0 Interior .......................... 151,152 License .............
Maintenance, Airbag ...................... 7 1 Maintenance Free Battery .................. 4 2 7 Maintenance Procedur es ................... 4 1 9 Maintenance Schedule .................... 4 6 6 Light Duty Schedule “B” ................. 4 6 9 Schedule “A” .
Filter ............................ 423,462 Filter Disposal ........................ 4 2 3 Identification Logo ..................... 4 2 2 Materials Added to ..................... 4 2 3 Recommendation ................... 421,461 Synthetic ............
W indows ............................. 3 2 Power Steering Fluid ..................... 4 6 3 Pregnant W omen and Seat Belts .............. 5 6 Preparation for Jacking ................. 387,399 Pretensioners Seat Belts ............................. 5 4 Programmable Electr onic Features .
Replacement T ires ....................... 3 4 3 Reporting Safety Defects ................... 4 8 9 Restraint, Head ......................... 1 2 5 Restraints, Child ....................... 75,82 Restraints, Infant ......................... 7 5 Rocking V ehicle When Stuck .
Integrated, Child ....................... 7 4 Lumbar Support ....................... 1 2 8 Power .............................. 1 2 4 Reclining ......................... 127,129 Removal ....................... 138,141,143 Stow ⬘ n Go (Fold in Floor) .
Wheel Lock ........................... 1 4 Steering Wheel Mounted Sound System Controls .............................. 2 7 5 Storage ............................ 190,455 Storage Bin ............................ 1 9 0 Storage, V ehicle ................
Load Capacity ..................... 332,333 Pressur e Monitor System (TPMS) ........... 3 4 7 Quality Grading ....................... 4 9 1 Radial .............................. 3 3 9 Replacement ......................... 3 4 3 Rotation ..............
T ransmitter Battery Service (Remote Keyless Entry) ........................... 2 6 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 177 T ransmitter Programming (Remote Keyless Entry) ........................... 2 3 T ransmitter , Remote Keyless Entry (RKE) .
Wheel and Wheel T rim .................... 4 4 8 Wheel and Wheel T rim Care ................ 4 4 8 Wheel Bearings ......................... 4 4 6 W ind Buffeting ....................... 33,184 W indow Fogging ........................ 3 0 0 W indows ..
NOTES.
NOTES.
NOTES.
NOTES.
NOTES.
NOTES.
Ein wichtiger Punkt beim Kauf des Geräts Dodge 2007 Caravan (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dodge 2007 Caravan noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dodge 2007 Caravan - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dodge 2007 Caravan reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dodge 2007 Caravan erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dodge 2007 Caravan besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dodge 2007 Caravan verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dodge 2007 Caravan. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dodge 2007 Caravan gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
