Benutzeranleitung / Produktwartung 2004 Sprinter des Produzenten Dodge
Zur Seite of 272
1 2 3 4 5 6 7 8 9 1 3 4 5 6 7 8 9 2 10 10 IN TRO D UC TIO N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 THI NG S TO KN OW BE FOR E S TA RT IN G Y OU R V EHI CLE .
.
1 CONTENTS Int ro duc ti on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How t o U se th is M a nu al . . . . . . . . . . . . . . . . . . . . . . 4 War ni ngs an d C a uti on s . . . . . . . . . . . . . . . . . . . . . . 4 Vehicle Identificati on Number, Sample an d Lo cat io n .
This ma nual h as been prepared with t he assi stance of service and engineering specialists to acquaint you with the operat ion and maintena nce of your new vehicle. It is supplemented by a W arr anty Information Book let an d v ar ious cust ome r o rie nted docume nts .
1 Vehicle id entific ation number, visibl e (locat ion: lower edge of winds hield ) Loc ation: below t he driver ’s seat on an outward faci ng positio n of t he mounting pilla r.
Sample Incomplete Ve hicle Certifica tion Label (Label 1) Sample Type Pla te (Label 2) Loc ati on: on valve c ove r of the e ngine Sam ple: Important E ngine Info rmation Daimler Chrysler AG, Stuttgar t, Germany Mercedes-Benz Engine, Model Engine Family / Engine Code Exhau st Emissio n Cont rol Syste m OM 6 12 LA C I D 164 2 M BX H2.
2 CONTENTS Ign iti on Lo ck / S ta rt er S wit ch . . . . . . . . . . . . . . . . . . 9 Imm obiliz er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Cent ra l Lo c kin g (Opt io na l) . . . . . . . . . . . . . . . . . . 11 U nlo cki ng : .
Se at B el ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 Seat Belt Warning Lamp and Airbag M al fun ctio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Fa ste ni ng an d Re m ovin g . . . . . . . . . . . .
2 0 The steering wheel is locked w hen the key is remo ved T o r e mov e the ke y , place the select or lev er in pos iti on " P"; rot ate th e ke y in the ign iti on l ock to posi tion 0; an d rem ove the key .
Th e imm obiliz er is aut omat ically ac tivated w hen the key is rem oved fr om the ignit ion lo ck. The engi ne c a n n o t b e st a r t e d . A s s o o n a s t h e c o r r e c t k e y i s i n se r t e d into the ignitio n lock, the imm obiliz er is deactiv ated.
2 To u nlo ck (1) To l oc k (2 ) To u nlo ck (1) To l oc k (2 ) CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the k ey from the ign ition and lock al l doo rs when leaving the vehicle unattende d.
If a d oo r loc k or i nter i or ha ndle on the dri ve r or fr ont- seat pas senger door is unlocked, only the d river or front- seat pa ssenger door will be unlo cked. NOT E: If a door lock or int erior ha ndle on t he slidin g doo r or tailgate is unlocke d, on ly the slidin g door or tailg ate will be u nlock ed.
2 After th e engine is s tarted ( about 1 s eco nd ), all doors with the exception of the driver-s id e door are locked au to ma tic a lly . The central lo cking s witch is located on t h e center sec tio n o f the das hboa rd.
Left -hand indi cator lamp is i llum inated: The driver’s door is locked. Right- hand indicat or lam p is i llum inated: Front-s eat passenger door and rear-seat passenger area/cargo area are locked. Bot h indic ator lamps ar e illu min ated: The entire vehicle is locked.
2 To lock entire vehicle: Press top of central lockin g switch. Th e left and the r ight indic ator lam p in the s witch illumina te. If one of t he two in dicator lam ps blin ks, at leas t one door is n ot c losed properl y. To un lock e n t ire veh icl e: Press top of central lockin g switch again .
Au Automatic Unlocking in Ca se of an Accident Th e doors w ill u nlock in the ev ent of cer tain accide nts, prov ided that the powe r supply is still main tained . Th is transm itter com plies wit h FCC r ules part 15 and wit h RS-21 0 of In d ust ry Can ada.
2 correct operation of t h e remote keyless entry transmit ter by l istening for the lo cking no ise and by checking that the white patch on the interior door handl e is v isible. When pressing the Œ or ‹ but tons , the indi cato r lamp i llumina tes.
Pr ess the Πbutt on a sec on d tim e . Th e pa ss eng er door and car go door s are un locke d an d the turn s ignal lamps, as well as the r em ote keyless entry transmit ter in dic ator lamp, bli nk o nce a gai n. T h e butt on must be press ed a second time with in about 2.
2 Replac ing Ba tt er ies Ra ted volt age: 6 V DC (2x 3V) Rated current:10 mA 1. Releas e the mechan i cal k ey by pressing the rel ease butto n . 2. Remove the batter y cov er. 3. Rem ov e the batt er y and instal l new one (note correct polarity; positive terminal up).
The al arm is tr i ggered if the securi ty system has been acti vated and • A doo r is o pened, • a door i s un locke d f rom i nsi de, • t he e ng ine co ver is o pene d, • the key is us ed to unlock the vehicle at any door, • t h e key is t urned to po sition 2 in th e i gn iti on lock .
2 1. P lace t he key i n posit ion 0 or 1 in t h e ignit ion l ock. 2. P ress t he swit ch up (1 ) to swit ch off th e tow ing protectio n . The ind icator lamp (2) is brief ly illuminat ed. If passen ger compa rtment prot ection will be sw itched off as well, wait until t he indica tor lam p (2) go es o ut, and 3.
3. P ress swit ch up (1). The ind icator lamp (2) is brief ly illuminat ed. To ac tivate th e setti ng ( passe n ger compar tment/ towing pr otection sw itched off): 4.
2 Th e vehicle will be c ent rally loc ked if all do ors ar e cl osed. Switchi ng Off the Alarm and Unlocking the Vehicle Pr ess the alar m pus hbut ton up one mor e ti me. Th e vehicl e w ill b e centrally un locked if it w as not cent ra ll y lo ck ed bef ore the a larm w as ma nu al ly triggered.
From the O utside To u nlo ck (1) To l oc k (2 ) To open the door: Pull the hand le to ope n the do or. W ARNING! Only drive with the doors properly closed. You could lose the l o ad, f or example , and endan ger ve- hicle occupa nts or othe r road users if the doors are open.
2 From the Inside To u nlo ck (1) To lock (2) To u nlock an d o pen Pull handl e. To l oc k: Press the han dle i n. All clos ed d oors w ill be locke d. The door is locked when the white patch in the handle can be seen. If an open door is detect ed, refer to "C entr a l L oc king ".
From the O utside To u nlo ck (1) To l oc k (2 ) To open the door: Pull the hand le and slide the doo r back to the s top. To cl ose the d oor: Slide it f orwards by the ha ndle until it la tches.
2 From the Insid e without Lock B utton To u nlo ck (1) To l oc k (2 ) To u nlock an d o pen: Pull handl e. To l oc k: Pr ess the h an dl e i n. The door is locked when the white patch in the handle can be seen. If an open door is detect ed, refer to "C entr a l L oc king ".
Pr ess loc k butt on (1) (a l l do ors are l ocked ) If the cent ral locking a utoma tically unl ocks a gain after having been locked, at l east one door is clos ed incorrec tly. If it th en l ock s a ga in wi thi n ab ou t 5 sec o nds , th en a ll cl osed doo rs ar e lo cked.
2 From the O utside To u nlo ck (1) To l oc k (2 ) To open the door: Pull the hand le to ope n the do or. W ARNING! Only drive with the doors properly closed. You could lose the l o ad, f or example , and endan ger ve- hicle occupa nts or othe r road users if the doors are open.
From the Insid e without Lock B utton To u nlock an d o pen: Pull handl e. To l oc k: Pr ess the h an dl e i n. The door is locked when the white patch in the handle can be seen. If an open door is detect ed, refer to "C entr a l L oc king ".
2 If the cent ral locking a utoma tically unl ocks a gain after having been locked, at l east one door is clos ed incorrec tly. If it th en l ock s a ga in wi thi n ab ou t 5 sec o nds , th en a ll cl osed doo rs ar e lo cked.
To lock manual ly: Move th e hand le down unt il i t is in the vertical position. Aut o mat ic lo ckin g: If the left-h and d oor is closed, it w ill be autom atical ly loc ked as soon as th e ri ght-h an d doo r has been cl osed. NOT E: If an o pen tailgate is locked before being close d, th en only th e tailga te w ill be locke d.
2 To cl o s e: Pul l the door s away f r om the ret aini n g pl ate s on the outer side walls . NOT E: The maxi mum cargo area door heig ht is 5 feet 7 inche s (17 6 cm). W ARNING! Always drive with the d oor s properly c los ed, be- cause i f the vehicle is operated w ith the d oors open, se rious pe rsonal injury m ay result.
To Un lock the Door f rom the Pas senge r Area To unlo ck, turn key to left (1) To open d oor ( 2) To cl ose door and lo ck (3) To Unlock th e Door fr om the Cargo A rea ( Op t ional) To u nlock, pr e.
2 Se at be lt s, b elt t ensi on ers , a irba g an d chil d res tra int systems a r e independent rest r aint systems w hose fun ction s comp lement e ach other . All s tates and provin ces requir e us e of child re strain ts t hat co mply wi th U.S. F ed eral Motor Vehi cle Safe ty Stan dard 21 3 and Canadian M otor Vehicle S afety Stan dard 21 3.
Do not seat chil d ren less t h an 5 fee t tall or 12 year s and under in the front. The back seat is the safest plac e for child r en. I f the vehicle is not equipped with a back seat, childr en less than 5 feet tall or 12 ye ar s an d un der mus t nev er r ide in t his vehi c le.
2 W ARNING! • Wearing a seat b elt incorrectly i s dangerou s. Seat belts are d e sig ned to go around the large b on es o f y ou r b od y. T he s e ar e th e s tr o ng e s t pa rts o f yo ur bo dy a nd ca n ta ke the f orc es o f a collision the best.
Whe n the key is in position 2 in t he ig nition lock, t he warning lam p < lig hts up for abou t 6 s econds; this takes pl ace whether or no t t he driver’ s seat belt i s fastened. Th e warning lamp < mu st go out aft e r abo ut 6s e c o n d s .
2 Fastening Seat Belts 1. Pull the seat belt over the body. The seat belt must not be twis ted or you cou ld be injur ed. 2. P ress the tongue i nto the b uckl e a n d m ake sure th at it is he ard t o engage. 3. T he seat bel t must be tig ht across the bod y.
Belt hei ght adjustme nt butt on 4 Do not ad just th e belt h eight wh ile the vehic le is mo vin g. To l ow er: Pr ess the butto n and move th e bel t sash guide dow n . To r aise: Move the be lt sash guid e up. The shoulder strap m ust pa ss betwee n the nec k a nd the sh ou ld er.
2 Th e driver ’s ai rba g is lo cated w it hin th e pa dded c enter of the steering wheel. W ARNING! If th e m a lf u nc t io n in di c a to r la mp 1 does not light u p w hen the key is in positi on 2 in t h e igni- tion loc k, if it flickers or lights up while th e vehi- cle is moving, there might b e a problem in th e ai rbag system.
The air bag is locate d behin d the lining sect ion of the das hboa rd. W ARNING! To re duce t he ris k of in jury whe n the fr ont airba g inflates , it is very important f or the driver to al- ways be in a properly seated p osition and to wear the seat belt.
2 The belt tensioners are located on the th ree-point seat belt s of t he driv er’s an d front pa ssenger seats. The belt tens ioners w ill not operate un less t he key has been turned to position 1 or 2 in the ignition lock.
W ARNING! Airbags can s e riously injure or kill you, esp ecially if yo u are close to the airbag when it deploys. Always wear y our seat belt. Airbags do not replac e seat belts b u t instead supplement the prot ection offe r ed by seat belts .
2 Mak e sure to give any new ow ner o f your vehic le this Owner’s Manual so that the new o wner wil l be aware of all safety warning s. If the instru ment cluster indic ates a malfunction of the &q.
The fre edom of mov emen t of the peda ls must not be impa ired in a ny way , s uch a s b y fl oormat s. The more cautiously you treat your vehicle during the break-in p eriod , t he m ore satisfied yo u will be with its performance later on.
2 When the engine has passed the break-in period, oil consumption may reach 0.5 % of t he fuel consumption re cord ed in actu al operatin g circ u msta nces. In isolat ed case s an d in arduou s oper ating conditio ns, oil consumption may inc r ease t o 1 % of the fuel consumpti on recorded in actual o per ati n g ci rcumst ances.
1. T ie Down Ri ngs The rings (1 ) ar e used to attach t he load with the help of tensio n belts. Pla ce the te nsion belt around t he load, secur e it on the ri ngs (1) and tie it dow n . W ARNING! Inhalation of exhaust gas is hazardous to your hea lth.
2 NOT E: Use neit her elastic f a stening straps nor nets when lashing d own the load. T hese are only i ntended as ant i-slip prot ection for lighter l oads . The means used to ti e down the load must not be r u n over sharp edg es or c orners. Sharp e dge s or corner s should be given pr o tective pa d ding.
.
3 CONTENTS Mir ro r A d just men t . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 In te ri or M i rror ( Op ti on al) . . . . . . . . . . . . . . . . . . 5 3 Ele ctrica lly Adjustab le Exter ior Mirro r (O pti on al ) . . . . . . . . . . . . .
Speed Control (Optional ) . . . . . . . . . . . . . . . . . . . . 71 Su nro of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 M an ua l Su n Roo f ( Op ti on al) . . . . . . . . . . . . . . . 7 4 E lect ric Su n Roo f (O pt ion al) .
3 1. N or mal position (D AY) 2. A nti-gl are pos ition (NIGHT) Th e switch is loc ated in the do or lin ing next to th e door hand le. Mi rror adjust ment, lef t ( 1) Mi rror adjust ment, ri ght ( 2) When the key is i n position 2 in the i g nition lock, each mirror m ay be adj usted by pressing t he adjustment button.
W ARNING! Adjusting a seat w h ile the v ehicle is moving is dang er ous. T h e su dden mov em ent of t he s eat could caus e you to lose control. The seat b elt mig ht no t be pro perl y adjus ted and y ou cou ld be injure d. Adjust the seat only while the veh icle is park ed.
3 Comfortseat (Optional) Seat adj u s tment, fore/aft (1) Seat c ushio n dep th (O ptional) (2) Seat h eight a djustment , front (3) Seat h eight a djustment , rear (4) Bac kres t til t (5) Han d p u mp (1) Bleeder v a lve (2) Reinforc e support: Use hand pu mp (1).
Til t a d justm ent (1 ) By adjusting the tilt adjust ment (thumb wheel) (1 ) the til t of th e a rm res t ca n be cha ng ed . If you n eed to remove the head rest r aint, pr es s the catch at the h ead r estr a int s o cket an d pull th e head re strai nt up and o ut.
3 Key (1) Seat cush ion (2) Fold do wn the seat cushio n of the foldin g seat. Th e sea t hea ter s witc h is locat ed on the center section of the dashboard. The seat heat er o nly works when the key is in position 2 in the ignition lock . Low heating outp u t , press top of the seat heater switc h.
Unloc ked (1) Lock e d (2 ) To rem ove: 1. Turn all re lease lev ers on the le gs of the a pprop riate rear bench seat up. The r ear bench seat can then mo ve in the seat moun ting cups . 2. L ift the rea r benc h seat up and out of the seat mo unt ing cu ps.
3 To instal l: 1. W ith t he r e ar bench seat fac i ng in the direc tion of travel , insert the legs of the rea r bench seat in the respectiv e seat mounting c ups on t h e fl oor.
To open: 1. Pull the releas e lev er ( 1). The hood then open s sli ghtl y and i s rest rain ed b y th e s afe t y c atc h. W ARNING! When the hood is open, there is a ris k o f injur y due to ve ry hot e ng ine c omp onen ts.
3 2. Open the sa fet y catch (2). 3. Swing the hood up until the suppor t strut (3) engages. To clo se: 1. Lift t he h ood u p slig htly. 2. Pre ss the sup port st rut (3) d own. 3. Swing the ho od down and make sur e that i t engages in its retaining cat ch.
See Secti on 4, Unde rstanding Yo ur Instru ment Panel, fo r switch l o cati ons. The range of the headla m ps can be adjusted to the load in the vehicle. Tu rn th e thu mbwhe el do wn to headl amp beam d own. Turn th e thumbwheel up t o headl amp beam up .
3 1. Permanen tly o n 2. Off 3. Inter ior l amps are swi tched on/off by t h e door con ta ct s wi tch es Inte ri or lam p sw itc h (1) Reading lamp swit ch (2 ).
Operati o n of Interio r Lamps Position 1: Con tinuou s o p era tion Pos ition 2: T he door co ntact switch es are use d to s witch the inter ior lamps on and off Pos ition 3 : Swit ched off Operati o.
3 Th e switch is locat ed on the ce nter se ction of the dash board. To s wit ch on : Pr ess top of s w itc h : Th e indicato r lam p in the sw itch wi ll illumina te. To switch off: Pr ess bot tom of swi tch. Th e switch (1) is located on the r ight s ide of the c argo area at the entrance for the s lid in g door.
Th e switch (2 ) is lo cat ed in the rig ht rear of the cargo area. To s wit ch on : Press top o f sw itch, the indi cator la mp in the s witch will ill umi nate. To switch off: Pr ess bot tom of swi tch. NOT E: The interior c argo area ligh ting will shut off aut omaticall y after 15 min.
3 La mp swit ch (3 ) C Side la mps, license plate an d instr ument lighting õ Low beam h e ad lamps, hi gh beam headl amps ƒ Mar ker lamps , right, c ombinatio n switc h up (1) Mar ker lamps, left ,.
To open the w indow: Tu rn th e manu al window cont rol i n a cou nt erc lock wi se di rec tion . To close the window: Turn t he manua l wind ow co ntrol in a c lockwis e dire ction. The windo w operati on switche s are loca ted on the dr iver ’s an d front - passenger doors.
3 Place the key in po sition 2 in t he ign ition lo ck. To open the w indow: Keep switch pres sed downward until the window has reac h ed th e desir ed posit ion. To close the window: Keep switch pres sed upward until the window has r ea ched th e desire d posit ion.
Touch-wipe: Press the windshield wiper switch up to th e press ur e point. NOT E: Smears ma y form on the gl as s when the windshiel d wipers are in use. In this case, operate the winds hield w ash er, even in rainy weathe r. Check wiper bla des regularly for damage and contam i nat ion.
3 Set / ac cel er ate speed (1) Set / d ecel erate speed (2) Off (3 ) Resume set speed (4) The speed co ntrol allows you t o drive in a more relaxed manner, for example ove r l o ng d is t ances, as it automati cally maintains the set speed by actively re gula ting t he thr ottle sett i ng.
Setting momen tary speed Briefly push speed control lev e r up (1) or do wn (2). Ca nc el sp ee d co nt rol Push speed control lever forwards (3) or step on the brake pedal . Increas e set s peed Push up speed control lever (1) briefl y – speed increase of 0.
3 NOT E: On up hill a nd do wnhill grades it may no t be possible to maintain speed. W ARNING! The speed con trol does not adapt itself automati- cally to road co nditions; ther efore do not use cruise con trol on icy roads. Th ere is a risk of skid- di ng an d loss of vehic le co ntro l.
To open, turn the h andwheel counterclockwise. Maximum opening = turn until t he stop is reached . To close, turn the handwheel clockwise until the stop is rea ched. Se e S ect ion 4 , U nder st andi ng Your In st rum ent Pan el, fo r switch l o cati ons.
3 The sun ro of doe s n ot o pen or cl ose: Check electric al fuse. Electrical fuses refer to “Electr ical Fuses“. If t he fuse works co rrect ly, th e sun r oof ca n also b e closed or opened manually. Rem ove cover ( 1) a t the front frame of th e sun roof .
Ashtray in the driver’s compartment. Ashtray ( 1) Cig ar lighter (2) To open the ashtray (1): Pull the ashtr ay (1) out until it locks into place . To close the ashtray (1): Push the as h tra y (1) fo rward o ver t he working poi nt until it rea ches the sto p.
3 Ashtr ay in the rear passenger comp artment. Th e as htrays are located in the side linings in the passenger compartment . The electri c al outl et is locate d on the lower right in the cente r of the das hboa rd.
The cup holder in the driver’ s co mpart m ent is located below the in strument panel bet ween the dri ver’s and fro nt p as se ng er ’s se at s. The cup hold ers in the pas senger compartment are locat ed in t he ce nter belo w t he sea t benc hes.
3 Lock e d (1 ) Unloc ked (2) Op en (3 ) Lock e d (1 ) Unloc ked (2).
.
4 CONTENTS Ins tr um ents a nd Co ntr o ls . . . . . . . . . . . . . . . . . . . . 8 3 Ins tru me nt Clu st er an d I ndic ato r Lam p s . . . . . . . 8 5 M ulti -F un ctio n In dic ato r . . . . . . . . . . . . . . . . . . . 87 C lock . . . . . . . .
W ind sh ie ld Hea te r (O pt io na l) . . . . . . . . . . . . . 1 14 Residu al En gine Heat Uti lizat ion (REST) . . . . 115 Air C ondit ioning, R egulat ed (Optio nal) . . . . . . 1 15 Clim ate Cont rol (on Vehicle s with Air C ond iti on ing ) . . .
4.
Lege nd F or In stru me nts And Co ntro ls 1. Lef t-han d air ve nt. 2. Multifu nction swit ch. 3. Cruise c ontrol . 4. Hood r elease l ev er . 5. Inst rument cl u ste r, r efer to "Instr ument Clu ster and In dicato r Lam ps". 6. Hazard warning fl asher switch .
4.
Legend For Inst rumen t Cl uster And In dicat or La mps 1. Tachometer (Engin e rpm), ref er to " T achomet er (Engine rpm)". 2. Tur n s ign al i ndi cat or la m p (l eft) , re fe r to "C omb in ati on Sw it ch ". 3. Turn signal in dic ator lam p (rig ht), refe r to "Co mbinati on switc h".
4 W ARNING! Never operate b uttons (1 , 2, 3 and 4) in t he multi- function in dicator while driving. To op erate t h ese b uttons the d river must reach thro ugh the steering wheel , which could significan tly impede its mov ement. Your atten tion will also be divert ed from the ro ad and traffic c ond i tion s.
Th e multi -fun ction in dic ator can be us ed to call u p t he odometer, trip meter, clock an d outside temperature, or in formatio n suc h as r emaini ng tim e/dista nce u ntil the next service is due, or the engine oil level.
4 Ac tiv ate t he mu l ti-f un cti on in dic a tor, re fer t o " Mu lt i- Function Ind icator". Butto n I – to r eve r se the tim e ad j ust m en t/ switch be tween hours and minu tes (1) .
Ac tiv a te t he mu lt i- fun c tio n i ndi c ato r. Th e t ot al dist ance co vere d by the v ehic le will b e shown. 1. To switch between the odometer and t he t rip meter, press butt o n ( 1 ) briefl y. 2. To r eset the trip meter , call u p t r ip met er.
4 Instr ument and dis play li ghting: 1. Sw itch on the ma rker l amps, r efer to "Comb inati on Swi tch" 2. Press b utt on ç , to instr ument an d display lighting dim mer 3. Press b utt on æ , to ins trumen t displa y lightin g brighter 1.
The outside temperature is d is pl ayed when t he multi- fun cti on indica tor i s acti va ted. Su dden c hanges i n temper ature, for instan ce when leav ing a garag e, are onl y shown after a cert ain d elay. NOT E: Outs ide tempe ratu re dis pl a y °F in USA only.
4 The coolant temperature is displayed when the key is in po sition 2 in th e igni tio n loc k . If corrosion inhibit o r/antif reeze is present in the cor rect concent ration i n the coolan t, t he coolan t tempe rature w ill be betw een 1 85 °F (+ 85 °C) and 250 ° F (+120 °C), depending o n oper at ing c o nditi ons.
Th e fuel level is dis played w hen th e key is in posit ion 2 in t h e igni tion lock. W ARNING! Driving wh en your e ngine is bad ly overh eated can cause some f luids which may have leaked into the engine compartment to catch fir e. You could be se riou sly bur ned.
4 The r eserve fuel i ndicator lamp (1) lights up for ab out 2 se c on ds . If the r eserve fuel ind icato r lamp rema ins on o r ligh ts up again when the engine is running, the fuel in the tank hasreac hed reserve level. Reserv e level: about 2.8 US gal (10.
When the key is turned t o position 2 in the ignition lock, the fue l fil ter ind icator la mp in the in stru ment cl uste r li ghts up for about 7 se conds.
4 Th e engine oil level ind icato r lamp : li ghts up i n the i nstrument cluster when the key is t urn ed to pos ition 2 in the ig niti on l ock. It must go o ut when the engine is running .
When the key is turned t o position 2 in the ignition lock, the c oolant le vel ind icato r lamp in t he in stru ment cl uste r li ghts up for about 2 se conds. It must go out w hen the eng ine is runni ng. If the coolant level indicat or lamp r emain s on or l ight s up again when the engine is running, the coolant level is t oo low .
4 When the ke y i s i n po sition 2 in the i gni tion lo ck, th e engine c ontro l unit indic ator lam p ± w ill li ght up in the instrument cluster. It must go out wh en the engine is ru nning.
3 Brake fluid level too low and electronic brake f orce di strib utio n (E BV) mal fun cti on ( Canada o nly) . < Seat belt wa rning l amp . - ABS malfun ctio n and electr onic brake fo rce di strib ution (EBV) mal fun cti on . ± Engine con trol unit malf unction.
4.
Lege nd f or S wit ch L oc ation s 1. Fog lam p swit ch (Opt ional), r efer to " Fog Lam p Swi tch". 2. He ad lamp r ange con tro l, refe r to "H eadl am p Ra nge Cont rol ". 3. Auxilia ry hea t exc hanger s witch ( Opt ional) . 4.
4 Fun c t ion butt on ( ‘ ) (1) Approximat ely one month or 2, 000 miles (3, 000 km) before a service is due, the maintenance symbol or lights up when the key is turned to position 2 in the ignition l ock. If the r emaining ti me (in days) is shown, the addit ional sym bol È also appears in t he multi-f u nctio n i ndicator .
Depending on the driving style, the mileage covered and t h e oper ating condit ions, the n ext service d ue is displa yed eithe r as a rema ining dis tance in "m i" (in km) or as a re maining tim e in "da ys". The le ng th of time between services should not exceed 2 years.
4 If the : i ndic ator lam p lights up brief ly when the engine is running , the engine oil level has dro pped to the minimum m ark. Check the engine oil level without delay a n d add o il to t h e upper m ark o n the d ipstick.
If the warni ng is dis played in the mult i-func tion i ndicato r wh ile the engine is running, the engine oil level is above ma ximum. Sipho n or drain off engine oil un til the engi ne oil leve l is between the lower and upper marks on the dipstick .
4 Briefly press button (1) twice within 1 s econd. The follow i ng displays c an then appear in the multi- function ind ic ator: It is not ne cessary to add engin e oil. 1q u a r t ( a b o u t 1l i t e r ) o f engin e oil mu st be added. 1.5 quarts (abo ut 1.
If the : indicato r lamp light s up when th e engine is running, the eng ine oil le vel has dr opp ed to the min imum mar k. C heck t he en g in e oi l level wit hout delay and add engine oil up to the upper mark on the dips tick.
4 Temperature c ont rol ( 1) Airflow control (2) Air d ist ri bu tion co nt ro l (3 ) Z Ai r to the wi ndshiel d and fr om the air ve nt s X Air t o the w inds hield and fo otwell a nd f r o m the ai .
1. Set t he airfl ow c ontrol (2 ) to position 3 or 4. 2. Set the t emper ature control ( 1) a s illust rated ( heater switched off). 3. Set t he air distribu tio n cont rol (3) to h . NOT E: A dju st t he ai r v en ts as re qui re d, refe r to " Side Air V ents and Center Ai r Ven ts".
4 Selec t air recir culati on if d us t or u nple asant odors enter the vehicle. NOT E: Pro longed air rec ircu lation can wor sen th e air qual ity and lea d to fogg ing up of t he wi ndows.
1. Set t he airfl ow c ontrol (2 ) to position 3 or 4. 2. Set th e temperatur e control (1) to P . 3. Set t he air distribu tio n cont rol (3) to Z . 4.
4 To open, turn the thum bwheel outwards. To close, turn the thum bwheel inwards. Interm ediate s ettings a re po ssible. The upper air vents supply fresh air (not heated) to the passenger/load comp a rtment. To open, turn the thum bwheel forwards. To close, turn the thumbw heel rearward s .
Th e sw i t ch f or t he he a t ed r e ar w indo w is loc ate d on th e ri gh t-h an d side next to the steer ing c olumn. It can be used o nly when the engi ne is ru nning . To switch it on: • Pres s upw ard ; the in dica tor lamp in t he switch will light up .
4 Th e REST sw itch (1 ) is locat ed on the center section of the d ashboar d . The residual eng ine heat u til ization system can be used to keep the vehi cl e in te ri or w a rm fo r so me t im e after the engine is s witched off. Tu rn t h e key to posit ion 0 in th e igni tion l o ck o r rem o ve it al tog et he r.
To switch on: Pr ess switc h (1), the indi cator la mp (2) in the sw itch lights u p. To switch off: Press switch (1) again, the indicator lamp (2) goes o ut.
4 NOT E: Open and adjust the air vents as requi r ed, re fer to " Side Air V ents and Cen ter Ai r Ven ts" . At high outs ide temperatures, a bet ter cooling performance is achiev ed by sw itchi ng o n air re circu lat ion . For n ote on ai r re circ ulati on, ref er to " Air Rec irc ulation " .
NOT E: I t is po ssib le tha t the a ir cond itioni ng wi ll autom atica lly switc h off at out side t emper ature s below 41 ° F (+5 °C). Dehumidificatio n is then also not possib le.
4 To switch it on: 1. Pre ss switch ( 1) on air con di tion ing, regulate d. The indicat or lam p (2 ) will ligh t up. 2. Operate t he air flow sw itch (3). Blower l evel 1 , press t he airflow switch (3) upw ards; the left- hand in dicato r lamp will ligh t up.
To lock fasteners (1) To unlock fasteners (2) Th e air straine r is locat ed at th e rear of the air condit ioner for rear passen ger compartment. Incr ease d quanti ties of sand or dust may set tle on the air co nd itio ner f or rea r pas sen g er c omp ar tm ent a ir str ainer when dr iving on dusty or san dy street s.
4 Instal lin g the Air Str a iner 1. Affix the air s trainer (3) t o t he grati ng (5) (make certai n tha t the end s pro ject evenl y). 2. Repla ce the ai r str ainer (3) and grat i ng (5) on th e cover and press the Velcro closure (4) on the cove r (6 ).
The s w itch (1 ) for act ivating the heat er booster system i s loc ated in the center section of the dashboard. The heater b ooste r sy ste m can be switch ed on w hile the ve hicle is being driven .
4 NOT E: The auxiliar y heater (w ater or air hea ting device) can be used whether or not the engine is run nin g. Th e auxiliar y hea ter s hould be run at lea st onc e a month fo r about 10 minutes . The max imu m hea ting pe riod is 12 0 minu t es.
To switch it on: Pr ess the swit ch upwa rd. Th e indica tor lam p in the sw itch wi ll light u p. Th e auxiliar y hea ter wi ll autom atically sw itch off after about 120 mi nutes. The auxiliar y heater will s witch o ver to af ter-run ning mo de (abo ut 2m i n u t e s ) .
4 NOT E: The t i mer water heater h as no a d justable temper ature sele c tio n transformer (10). 1. Memory lo cation (1 – 3) 2. Current day o r preselected day 3. Current time or preselected time 4. Symbol ö – Status d i spl ay 5. Butt on ” – Set ti me an d d ay 6.
Switchi ng the Auxiliary Heater On an d Off - Ig nition Of f To switch it on: Pr ess butt on ö . Th e veh icle -s ide b lowe r a ut om at ical ly sw it ch es on . Disp lay: Symbol ö and re maining hea ting period. Th e remaining hea ting per iod c an be length ened by using the butt on þ (max.
4 Th e "D ay " d isp lay th en flas hes . Use either the butt on ý or þ to set t he curr ent day of t he week. The curren t day has been saved when the d isplay st ops flas h in g or t h e but ton ” i s u s e d f o r con fir mat io n. When the ignition i s switched on, the curr ent time and day r emain o n dis play.
Switching o ff preselected t imes: Pr ess the but ton H repeatedl y until no memory is displayed – n o preselected t ime is a ctivated. Setting the Heating Period Settings bet ween 1 minute and 120 minutes may be set for heat ing periods to run when the ignition is switched off.
4 In preheat mode, the blower is automatically switched on at bl ower speed 1 when the water heater is switched on. W hen drivin g, the airf low control s witch (2 ) can be set a s d e sir ed .
To switch on at blowe r s peed 1 : Press the upper s e ction, the left -hand ind ic ator lamp in the s witch lig hts u p. To switch on at blowe r s peed 2 : Press the lo wer se ction, the ri ght-han d indicato r lamp in the switch ligh ts up. To switch off : Pr ess the swit ch to the mi d dl e po sition.
4 • I nsu ff icie nt co ol an t, ch eck co ol ant le vel . • Th e heat er will rem ain swit ched off afte r it has been ov erh e at ed a n um be r of t im e s (a b ou t 1 0 ti m es i n succession). H ave the fault repaired by an authorized Sprin ter Dealer.
.
5 CONTENTS Po wer as sis t ance . . . . . . . . . . . . . . . . . . . . . . . . . . 1 35 Sta rti ng t he E ng ine . . . . . . . . . . . . . . . . . . . . . . . . . 135 M axi mu m E n gine Sp eed . . . . . . . . . . . . . . . . . . 1 36 C onst a nt R PM s ( O pt ion al) .
De ac tiv a tin g t he A cce le rat io n S kid C on tr ol (A SR ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 59 Brake As s ist System (B AS) (Cargo/passenger vans type 2500 C/HC/SHC onl y) . . . . . . . . . . 160 In dicator Lam p E lectronic Stabi lity Progr am (ESP) (C argo /passe nge r vans type 2500 C/HC/SHC only) .
5 Battery charge warning lamp (1 ) Eng ine oil level indicat or lam p (2 ) Preheater indicator lamp (3) W ARNING! When the en gine is not running, the re is no power assi s tance f or th e b rake an d steer ing syst em.
1. Apply the parking brake. 2. Autom atic tra nsmiss ion, sh ift s elect or lev er to "P" o r "N" posi tion , re fer to "A utoma tic Transm ission ". 3. Do not d epress th e accelerator pedal. 4. Turn the key to position 2 in the ign ition lock.
5 The s w itch fo r the C onstant RPMs is l oc ate d on th e ce nt er s ect io n o f the das hbo ard. Constant RPMs inc reases the engine-idling RP Ms t o a s et working- RPM lev el and m ainta ins this level regar dless of work load.
NOT E: The C onstant RP Ms will a utoma tically s witch off when the parking brake is released, the vehicle is in motio n or the c ontr ol unit detec ts a malfun ction . Th e Cons tant R PMs will a lso autom atica lly sw itch of f when you depress the brake pedal .
5 The automatic transmi ssi on select s indiv idual g ears automatically, dependent upon: • Selecto r lever posi tion • Accelera tor position • Vehicle speed Th e gear shif ting pr ocess is co ntinuo usly ad apted, dependent on the driving style, the driving situation and t he road c haracteri stics.
NOT E: After s electing any dr iving po sition fr om "N" or "P", wait a mome nt to allow the gear to fully engage before a ccelerating, espe c ially when the engi ne is cold.
5 Th e c u rrent selec tor le ve r positio n (1) is indica ted in the gear r ange indicato r display. The a utomatic gear shift ing process can be adapted t o specifi c operat ing cond itions using t he selec tor le ver. v Park Position The park pos it ion is to be us ed when parkin g t he vehicle.
NOT E: Coas ting the vehicl e, or driv ing wi th selec tor lever in "N " can res ult in t ransm ission dam age th at is not cov ered by the S prin ter W ar ranty .
5 tran smi ssion are ne g a tively affe cted by this mod e of op er ati on . The delayed upshift is eff ec tive with vehicle speeds below 3 1 mp h (50 km / h) at partial thro ttle and engi ne temperatur es below 95 F (+35 C).
In t he c ase of po wer f ail ure the tr ansmiss ion se l ec tor lever c an be manually unl ocked (for v ehicle tow ing). To do so, insert a pin (1) (ball point pen), into the covered opening below the pos it ion " D" of the shift pattern . W hil e pu sh ing the pin down, move selector lev er from p ositio n "P" .
5 Th e hand ling c haract eristics of a v ehic le whe n la den are depen dent on t he t ype of load and the dist ribution of the load within the vehicle. Carryin g heavy or bulky loads may a lter the vehic le’s hand ling characteris tic. Pleas e note and c omply w ith th e follow ing infor matio n when load i ng an d transpor ting goods.
• Protect shar p edges w ith padding. • Check t he tire pr essure s af ter lo ading the v ehicle. For passenger vans: • Do not s t ack load s higher than the upper edge o f t he backres t s. • Always place the load again st th e backrest s of the seat benc hes.
5 NOT E: On long and steep downhill slopes, reduce the load o n the b rakes b y shiftin g dow n a gea r to utilize the braking effect of the en gine. To prevent corrosion on the brake pads, af t er driving on v ery wet roads , espec ially if road salts have been us ed , ap p l y b r ak es b ef o re pa rk in g t h e v e hi cl e.
; USA only 3 Cana da on ly Wi th the ke y i n p o si tio n 2 in th e ig nit io n l oc k an d t h e parking brake releas ed, the indi cator lamp ; ( 3 ) li ghts u p for abou t 2 sec ond s. If the indica tor lamp does not go out a fter a bout 2 seconds, th e brake fluid level has sunk below the minim um fillin g c apacit y.
5 NOT E: I f you f ind t hat t he mi ni mum m ark on the br ake fl uid rese rvoi r is reach ed, h ave th e br ake sy s tem checked for pad thickness and l ea ks. With the k ey in pos ition 2 in the ig nition lock and the parkin g brake r eleased , the ind icato r lamp lights up fo r a bou t 2 se c on ds .
Only apply t he parking brake when the v ehicle is sta ti on ar y. To apply : Pull the leve r up as many no tches as pos sible. Wh en the key is in posi tion 2 in the ignit ion lock , the pa rking brake ind icator lamp will lig ht up in t he instrum ent cluster.
5 The vehicle can be equipped with the following Drivi ng Safety Systems: • Anti- lock b rake system (AB S) • E lect roni c b rake fo rce d istri butio n (E BV) • Accele ration skid c ontro l (A.
When the key i s i n position 2 in the i gnition lo c k, the ABS indicat or lam p - w ill light up in the in stru ment clus ter. It g oes out aft er about 2 se conds. If the ABS indicat or lamp - remain s on or l ight s up when t he engin e is runni ng, the A BS is m alfunct ioning.
5 as the volt age r eaches this le vel a gain the A BS is then rea ctiv a ted. If AB S ma lfunctions , the o ther drivin g safety s ystem s are d eactivat ed. The handling an d brak ing ch aracteri stics of you r vehi cle change . The ot her brakin g and driv ing sys tems s till fun ctio n nor mally.
W ARNING! Do not red uce the for ce applied to the b rake pedal if it is necessary to b rake the vehicle furthe r. This will negate the main benefit of ABS – th e ability to brake without affecting the s teerability of the vehicle. In the even t of an emerg ency stop, fully depress the br ak e peda l.
5 The electronic brake force distribution (EBD) prevents the rear wheels from being ov erbraked when there is little loa d on the rear ax le or if ther e is not mu ch fr iction be twe en the tir es an d ro ad ( e.
If the indi cator lamp k remai ns on or lig hts up when the engine is running, the accel er ation ski d con t r ol (AS R) or the br ake assi st sy ste m (BAS) i s malfun ctioning.
5 Whe n the key is in position 2 in t he ig nition lock, t he warning lam p v in the speedom e ter wi ll l ight up for about 2 s ec onds. It must go out when the eng ine is run nin g. Th e warning lamp v fla s hes when : • T he ASR or E SP is acti vated .
ASR m akes it po ssibl e to pull away and a cceler ate on a slippery sur fac e. A spin ning wheel is braked an d its trac tive po wer is tr ansfe rre d to the whe el wi th full grip.
5 See Secti on 4, Unde rstanding Yo ur Instru ment Panel, fo r switch l o cati ons. Wh en drivin g with s now cha ins, in deep s now, or on sand o r gravel, it can be be nef ic ia l to dea c tiv a te t he acce leration skid contro l (A SR).
To deac tivate th e ASR: v in t he speedo meter lights up. Tractio n control continues to cut in if, for example, a wheel on one sid e of the v ehicl e rea ches its l im i t of adhesion. T he w heel is t hen bra k ed to in crease the vehicl e’ s overal l trac t ion.
5 For the indic ator lamp k ref er to " Indic ato r Lam p Accele ration Skid Cont rol (ASR ) and Brake Assist System (BAS) " Whe n the key is in position 2 in t he ig nition lock, t he E SP indi ca tor lam p w ill lig ht up in t he ins tr ume nt cluster as a funct ion check.
NOT E: If the ABS is ma lfunctionin g o r the v oltage i n the vehi cle’s elec t ri cal system drops below 10 volts, the indicat or lamp w ill also light up in the inst rument clust er and the ESP w ill be deact ivated.
5 When the engine i s not runni n g, there is no power assist anc e for the steerin g. Greater force will be required to s teer the vehicle. Check ti res regularly fo r even tread wear, t read depth (note le gal requ irements) and s ig ns of ex ternal dam age .
W ARNING! Fitti ng other wheel sizes to the vehicle wil l c hange th e vehi cle’ s han dlin g ch ar ac ter isti cs and m ay lead to an ac cident resulting in severe p ersonal in- ju ries , dea th an d pro per ty dam age . Do not u se retreaded / remolded tires.
5 Tire grip is greatly reduced on a wet o r i cy r oad. Speed and driv ing sty le must there for e be adapted to suit road cond itions. In win ter, in stall M +S r adia l tire s. Below a tread dep th of 1/8 inch (3 mm), tir e grip begins to decrease rapidly on w et roads.
The vehicle’s s afety on the ro ad depends to a great ex tent on tir e con dit ion and corr ec t tire pr essur e. If t ire pr essures ar e too h i gh or too l ow, ha n dl ing chara cteristi cs will be advers ely aff ected and fuel consum ption and tire wea r will increa se.
5 Fro nt Axle Size Appl ication Axl e lo ad s in lbs (kg ) , se e typ e p lat e 2, 976 (1, 350) 3, 219 (1, 460) 3,527 (1,60 0) 3,638 (1 ,650) 3,858 (1,7 50) 195/70 R 15 C 104 / 10 2 R Sin gle 47 (32 5.
Rear Axle Size Applicati on Ax le l oad s in lbs (kg ) , se e typ e p lat e 5,07 0 (2, 300) 6,172 (2,80 0) 6,61 3 (3, 000) 7,054 (3,20 0) 195/70 R 15 C 10 4 / 102 R Do u ble 40 (275 ) 51 (350) 55 (380.
5 For reasons of co mfo r t , we rec ommend se tti ng the tire pressures ac cording to the table bel ow, depending on axl e lo ad s , on longer journey s with an unloa ded o r only pa rtially loa ded v ehicle.
Inst all sn ow cha i ns on re ar wheel s only. In stall snow chai ns on exteri or wheel in vehicles w it h double tires . Com ply wit h the m anuf actur er’s installat ion instruct ions. NOT E: V ehicl es with snow cha i ns insta lled ar e only to be d riv en on a snow-c overe d sur face.
5 At ver y low temperatur es the flui dity of No. 2 di esel fue l may be come i nsu ffi cient d ue to pa rra ff in separa tion. For this reason the v ehicle c omes equipped with a fuel preheater. It permits a tr o ublefr ee engine operat ion to a temperat u re of approximately 14 °F (– 10 ° C ) when using No.
Th e fuel f ille r neck ( 1) is lo cated behi nd the fue l filler flap n ext to t he driver’s do or. The fuel fi ller flap c an be opened when the driver’s door is open. Turn the fuel filler ca p (2) on the fuel fil ler nec k ( 1) count erclo ckwise and t a ke it o ff.
5 NOT E: Only fill t he fuel tank until t he fill nozz le cuts off, do not overfil l. NOT E: Holder on the in s ide of the fuel filler flap only fo r cargo/p ass enger vans.
If the fuel tank was run empty, the diesel fuel s ystem must be bled after refueling before starting the engine. T ur n th e k ey in the ign itio n l oc k to p o sit io n 2 for at leas t 30 seconds. Re tur n th e ke y t o p o si tio n 0. Star t th e en gin e .
5 1. Fuel filter 2. Drai n hose 3. Water d rain sc r ew The fuel filter (1) i s located in the engine compartment. NOT E: The f u el filter must b e d r ained as soon as t he water in fuel ind icator lam p light s up . NOT E: Prior to opening water dra in screw (3), plac e a suitabl e r eceptac le underneath the drain hose (2).
• Open im m ediatel y the water dr ain sc r ew (3) abo u t 1 turn (counter clockwise) until fl u id emerges. En sure that the fluid is collected in the r ec eptacle. • Cl ose th e water d rai n screw (3) as s oon as about 0. 25 US qt (0.2 liters) are emerged.
5 The ma ximu m perm issibl e roof lo ad is: • Vehic les with low roof 660 lbs (30 0 kg) • Vehic les wi th high roof 3 30 lbs (150 kg) • The we ight of any loa d carried on the roof, including the roo f rack, must not ex ceed the ma ximu m per missib le ro of loa d.
Gros s Vehicl e Weigh t Rati n g (GVW R) is the max imum permissible v ehicle weight: 8,550 lbs (3,878 k gs ) or 9,990 l bs (4,531 k gs) NOT E: The we ight of y our Sp rinter is ind icate d on the type plate. For type plate, see Identificatio n L abels.
5 To ass u re that the tow v ehicle and tr ailer are in co mpli ance wi th the ma ximum pe rmi ssibl e wei ght limi ts, and to know the actual weights , have the l oaded vehicle- trailer comb ination (tow v ehicl e includin g driver , p assengers an d ca rgo, tr ailer fully l oaded) wei gh ed on a c o mme r cial sc al e.
There are many dif ferent laws, including speed li m it restrictio ns, having to do with trail er towing. M ake sure th at your ve hicle-trailer comb ination will be legal, not only for where you resid e, but also for wher e you will be d riving. A good sou rce for this info rmati on can be t he polic e o r loca l autho rities .
5 W ARNING! Take into co nsideration that w hen towing a trail- er, the han dling charac teris tics are d iffer ent a n d less stable fro m tho se w h en operat in g the v ehicle without a trail er. It is importan t to avoid sudden maneu vers. Sudd en mane uvers ma y lead to los s of cont ro l over the veh icle-trailer combination.
Extreme ca r e must be exerc is ed sin ce your vehi cle with a tr ailer wil l require ad ditional p assing dist ance ahead than when driving without a trail er. B ecause your vehic le and tr ailer is lon ger than y our vehicle al o ne, yo u wil l also need to go much f arther ah ea d of the p assed vehic le before you can return to your la ne.
5 Av oi d f ord i ng f loo d ed r o ad s or p as s in g t hr ou gh w ate r unless you are certain as to how deep it is. Driving through deep wat er can cause dama ge to the vehicle, includin g but not limit ed to the e lectrica l compo nents, eng ine, tr ansmi ssi on, etc.
It i s thei r respo n s ibili ty to c erti fy th at the altere d vehi cle confor ms to all a pplic able stan dards and re gula tions affec ted by the vehi cle alter ation or con tinu es t o compl y wi th th e Mot or Vehi cle S afety stan dards and Em ission s regulat ions.
6 CONTENTS Hazar d Warning Fla s her Swit c h . . . . . . . . . . . . . 186 Ve hic le Too l Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 87 Ch an ging th e Tir e . . . . . . . . . . . . . . . . . . . . . . . . . . 1 87 Sp are W h ee l L oca tio n .
Th e switch is located on top of the steerin g colum n housing. When the hazar d warnin g flasher s w itc h is switch ed on, th e in dicato r lamp in th e swit ch an d the t urn signal indicat or lam p in the in strume nt c luster b oth fla sh.
6 1. Loc ked 2. Unlocked The vehicle t o ol kit and the jack are locat ed under the hatch in the front passenger footwell. If you get a flat tire while d riving, g radua lly d ecrease your speed. Hold the steering wheel firmly and slow ly move to a saf e place on the side of the ro ad .
Procedure: 1. Park the vehicle on a firm, level, non-slippery su rfa ce. 2. Sw itch on the ha za rd w arnin g fla sher swit ch, apply the parki ng br ake, an d place the transmission sel ec tor i n "P" .
6 3. Everyone mus t lea v e the vehicle before you jack it up. 4. Everyone must leave the danger z one, before jacking t h e vehicl e. 5. The vehicle must be safe g uard ed in acco rdance with legal regu lations (suc h as using a warnin g triangle) . 6.
NOT E: Lug wrench and ja ck, refer to "Vehicle T o ol Kit ". For rea s on s of saf ety , ch e ck a t r egu la r in ter va ls that the spare wheel is properly secured. Spare Wheel Beneath th e End of the Frame Retaining screws for the spare wheel structural mem ber (1) Hook (2) 1.
6 Spare Wheel in Cargo A rea (Optional) 1. Open the r ea r cargo doors. 2. Turn spar e whe el holder to loose n. 3. Remove the spare wheel..
Spar e Whe el Lo cati on for Cha ssi s 1. Loosen thum b nuts by hand and remove. 2. Use wrench to loosen fixin g nut to t he t h r ead e nd . 3. Lift spare wheel holder. 4. Turn hooks to the si de an d low er spa re whee l holder. Rem ove t he spare w heel.
6 The jack is l ocated toge ther wit h the vehi cle tool k it under the hatch in the front passenger footwell, refer to "V ehic le T ool K it" . 1. Loosen the w heel bolts before raising the vehicle. 2. Close the release valve on the jack. 3.
Rear Axle Jack Point for 8,550 lb s (3,880 kgs) (Vehicle type 2500 HC/SHC) Th e vehicle j ackin g point is located und er the longit udinal member in front of th e rea r axle .
6 Rear Axle Jack Point for Chassis (Vehicle type 2500 C and 35 00 C) The vehicle jac king point is locked next to the front rec ess fo r th e le af s prin g . 1. Loosen the w heel bolts. 2. Jack up the vehicle until the wheel is clear of the ground. 3.
Wheel bolts for pressed steel wheels (1) Wh eel bolts for light-allo y wheels (Opt ional) ( 2) NOT E: The optional l igh t al loy wheels are supplied with 5 short wheel lug bolts enclosed for the steel spare wheel in the v ehic le t ool kit.
6 Centerin g w heels with wheel bolts • If dual assemb lies are used, before placement the inner whee l should b e inspect ed to ens u re t hat all ball bearing rings are in proper position. • Install the w heel an d s nug the wheel bolts. • Slight ly tighten wheel bolt s.
T ightening tor que for 9,990 lbs (4, 530 kgs) (vehicl e type 3500 C/HC/SHC): Steel wheel – 138 lbf.ft ±14 lbf.ft (19 0 N.m ±20 N .m) • Remove jack and st o w it in the vehicle tool kit. • Check t he ti re pressure . • Re-tighten the wheel bolts to the specified t orque with a torque wrenc h after a dist ance of 30 mil es (about 50 km).
6 • A dead battery can f reeze at a temperature of 14 F (–10 C). Never try to start the engin e if the battery is froz en . Th aw the ba tte ry ou t firs t. • Only use a batter y of the sa me rated voltage and of approxi mately the sam e capacit y fo r jump-star ting.
1. Fir st conne ct th e posi tiv e ter m in als o f the t wo batteries (see ill ustratio n, Items 1 + 2) . Start wit h the booster battery. 2. Then conne ct the nega tive termin al of the vehic le wit.
6 For towing d istan ces up to 30 miles (a b out 50 km) • Sh ift se l ec tor leve r to "N " posit i o n. • Do no t exce ed a t owing spee d of 30 m ph (50 k m / h). For towing d istan c es g reater than 30 mile s (about 50 km) • Remove the propeller sha fts leading to the drive axl es.
•R a i s e t h e f r o n t a x l e . • Observe the same towing restrictions as for engine dam age . • Rais e th e rear axle . NOT E: Co mply w ith lo cal le gal regulatio ns r egardin g towing vehi cles.
7 CONTENTS Eng in e C omp ar tm en t . . . . . . . . . . . . . . . . . . . . . . . 2 05 Sp rint er O rigi nal P art s . . . . . . . . . . . . . . . . . . . . . . 2 0 7 Se rvi ce Pro duc ts . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 07 Di sp os al of Se rvi ce Pro d uct s .
W ipe r Bl ad e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 3 L ight A llo y W h eel s . . . . . . . . . . . . . . . . . . . . . . 2 24 In st rum en t C lu ste r . . . . . . . . . . . . . . . . . . . . . . . 2 24 St ee ring W h eel and G ea r Sel ect or L ever .
7.
Legend Fo r E ngine Comp artment 1. Wind shie ld was her syst em f l ui d reser voir. 2. Maintenance indicat o r for air cleaner el ement (Optio nal). 3. Oil dipsti c k. 4. Oil fille r nec k. 5. Ribbed V-belt . Auxilia ry dr ive (O ptio nal) refe r to “Au xilia ry drive “.
7 Every authorized Spr inter Deal er maintains a stock of Sprin ter original parts for maintenance a nd repair wor k. Sprin ter original parts are subjected to the most str ingent quality inspections and will ensure that the vehicle is m aintai ned at a high level of oper ating efficien cy a nd saf ety, and t hat it maint ains its value.
Disp ose of service pr oduct s and of par ts wh ich co me into contact with them (e. g. filters) in a n environmentally responsible manner. Comply with applica ble bars a nd reg ula tions.
7 1. Washe r sys tem flui d reserv oir When topping off, add windshield washer fluid ("S" for summer or "W " for winter) to the water.
1. Oil dipsti c k 2. Oil fille r nec k Ch eck the engine o il level at regular in tervals wit h the v ehic le st an di ng on a l ev el s ur fa ce. • Ch eck en gine oil level about 5 m in utes after stopping the engine, whic h should have reached its regular operating temperature.
7 The ribbed V-belt drives t he accessories, suc h as generator, coolant pump and hydraulic steering pump. Th e ribbed V-belt is autom aticall y kept tens ioned. Check the state of the ribbed V-belt regularly, such as at every engine oil level check. Th e belt mu st not be dam aged, worn , oiled or glaz ed.
Use brake fluid approved to MB 331. 0, or a DOT 4 brake fluid with : minimu m dr y boiling p oint (E RBP) 500 °F , minimu m wet boiling point (WERB P) 356°F , maxi mum vis cosity 1500 m m 2 /s, conform ing to FMVSS1 16 an d ISO 4925.
7 Have the co olant renewe d at least ever y five ye ars or af ter 10 0,000 mi les. When th e coolan t is renew ed, the new coola n t shoul d contain 50% a ntifreeze/c orrosion inhibi tor by volume. This corresponds to antifreeze pro tection down to - 37 °C/-35° F .
• Open the hood. • At f irs t, only tu rn the r adiat or c ap to the firs t deten t to release the pres s ure from the cooling system. O nly th en sh ou l d t he r a dia t or c ap b e re m ove d com p lete l y.
7 (1.5 c m) above the base ar ea which is visible through the fille r o pening . • Replace and tighten the r adi a tor cap. If a la rge quantit y of cool ant has been lost, or if small er amoun t s are lo st at re gular in tervals, have the en gi ne cooling syst em examined by an authorized Spr i nter Dealer.
Th e stand ard batte ry is located in the engine com p art men t. Th e auxiliary b atter y is locat ed und erneat h the front passenger seat (optional eq uipment). The battery will n ot achieve its m aximum service life unless it is kept adequa tely ch arged at all t imes.
7 1. Vent tube 2. Fitt ing Al l elec trical con sumers must be switc hed of f. Fi rst con nect and t ighten t h e p osi tive te rmin al clam p, then th e neg at ive ter mi na l.
1. Fold over the wiper arm (2) an d place th e wi per blad e cross wise. 2. Press the r e t aining spring (1) and push the wiper blade out of th e end o f the wiper arm (2). 3. Remove the wiper blad e. 4. Insert the end of the wiper ar m (2) into the larger cutout (3 ) of the wiper blade.
7 In operat ion, your vehicle is s ubjected to varyi ng external i nfluences w hich, if gone unche cked, can attack the pai ntw ork as well as t he underbody and cause la sting d amage. Such damage is c aused not only by ext reme and varying c limatic condi tions, but also by air pollu tion, road salt, t ar, gravel an d stone chipping.
Scr at ch es, co rros iv e d ep osit s , cor ro si on o r da m age d u e t o neg l ig ent o r in corr ect car e cann ot alwa ys be removed or repair ed with car-care products. In such cases it is best to seek ai d b y your aut horized Sprinter Dealer.
7 If the vehicle is very dirty, prewash it before you drive into th e c ar wash . Fol d i n t he e xte rior mirror s befo re wash in g the v eh icl e in an aut omat ic car wash an d make sur e tha t the winds hield wipe r swit ch is in p osition 0 . The exte ri or mirror s and win d s hield wi pers coul d other wise be dama ged.
Cor rosion prot ecti on, such as an tic orrosio n wax should be a ppl ied t o the engine compartment after every engine cleanin g. Before applying, all control linkage bus hing s and joints sho uld be lub ricat e d. T he poly-V-belt and all pulleys should be pr otected from any wax.
7 Use a wi ndow clea nin g s oluti on on all gl ass surf aces. An automot ive g lass c leaner is rec ommende d . There a re 2 steps i n the front bumper. This makes it easi er to c lean the win dshield. Clean the wiper blade rubber with a c lean cloth and dete rg ent sol ution .
A wheel care product should be used for regular cleani ng of t he light alloy wheels. If possible, cl ean wheels once a week, using a soft br istle brush and a st rong spra y of water . Follow ins tructions on cont ainer. NOT E: Use only acid-free c leaning materials .
7 etc.) may cause t he upholstery to become permanently di scol ored. By li ning t he seats wi th a prop er interm ediate cove r, conta ct di scolora tion will be prevented. Leat her Uphols tery Wip e leather upho lster y with a dam p clot h and dr y th or ou gh ly or cl ea n wi th a lea th er care p rod uc t.
1. Locked 2. Unlocked 3. Detent spring – engage when the cover is fitted CAUTION! When replacing a blown f us e , it is important to use onl y a fuse havi ng the correct amp erage rating. The use of a fuse with a rating other than indicate d may res ult in a dangerous elec trical system ove rload.
7 Positi on o f fuses and relays 4. Fuses 5. Re lays.
Fus e Ass ig nme nt, Stan da rd Equi pm ent.
7 No. Ra ted C ircui t 1. 10A Par king l amp right , tail lamp rig ht 2. 10A High beam he ad lamp, right 3. 10A High beam he ad l amp, lef t, high beam indicator lamp 4. 10A Backu p lamp 5. 10A Brake lamp 6. 20A Windsh ield wiper mo tor 7. 15A Horn, h eated r ear window, air r ecircul ation s witch , opt i o nal equi pment relay ( termi nal 15) 8.
1. Win dshield wip er m otor (W ) 2. Diesel engine c ontro l unit (M ) 3. Turn sig nals (B) Th e cov er is located be low the d rive r’s s eat. Re mov e co v er: 1. Pre ss both det ent sp ring s do wn a n d re mov e c ove r. Install cover : 2. Positi on cover at botto m and engage both deten t spr in gs .
7.
NOT E: The a r rang ement of th e fuses (1) d epend s on the optional equipment install ed on the vehicle. The assi gnments are sh own on the insi de of the co ver of the fuse box. Diod e s: No. C ircui t 1. Not in us e 2. Not in us e 3. Not in us e 4.
7 Swi tch the l ights off to prev ent shor t circui ts. Only t ouch new bulbs wi th a clean, lint-free c loth. Do not touch bulbs with wet o r greasy fingers. Only fit 12 v olt bulbs of the s ame typ e as before and wi th th e cor re ct wa t tag e ra ti ng.
1. Tu rn signa l lamp an d side mar ker l amp, 3457 NA – 12V 28 / 7.5W, yel low g las s 2. Low beam headlamp, H7 – 12V 55W 3. Fog l am p, H 1 – 12V 55W 4. Side a n d par kin g lamps , W5 W – 12 V 5W 5. High beam headlamp s, H1 – 12V 55 Turn Sig nal Lamp s a nd Sid e-Ma rker La mp s 1.
7 Low Beam Headlamp s 1. Unplug t he cable connector from the bulb. 2. Unclip in th e retaining spr ings. Press the r etaining spr in gs tow a rd s th e h ea dla m ps an d do wn (directi on of arrow). 3. Remove the bulb. 4. Insert th e new bulb so that the retain ing lu gs are fed into t he recesses in the reflector section of the bulb holder.
Fog Lamp (Optional) 1. Remove th e cable connecto r fr o m the bulb holder. 2. Pre ss bot h re tain ing spri ngs in t he dire cti on of the headl am ps and then o utward (i n the dir ection of th e arr ow ) .
7 Sid e and Park ing La mps 1. Pull out the bulb hold er with the bulb. 2. Replace the bulb. 3. Insert t he bulb ho lder. 4. S ecur e the ho us ing ca p. High Beam Headlamp 1. Unplug t he cable connector from the bulb. 2. Pre ss th e retai ning sp ring to wards th e he adla mps and o u t wards ( directio n of ar ro w) .
Cargo/Pa ssenger Van 1. Loc ked 2. Unlocked Bu lbs are ch anged fr om ins ide the carg o area. Th e r ear lamp cluste r bulb holde r is located be hind the interior paneling.
7 Chassis Retainin g scre ws Cleara n ce la mp, R5W - 12V 5W Tu r n s ig n al la m p , P 2 1W - 1 2V 21W Stop l amp, P21W - 12V 21W Taillam p, R 5W - 12V 5W Backup l am p, P21W - 12V 21W License plate lamp (driv er‘s side only), R5 W - 12V 5W 1. Loo sen retain ing screw a and rem ove la mp housing.
1. Press the bulb socket to the l eft, against the force of th e s prin g , an d r e mov e. 2. Repla ce the bulb, C5W – 12V 5W. 3. Inst all t h e cover. 4. Re- instal l the bulb soc ket. Retainin g scre ws 1. Ta ke ou t the ret ai nin g s crew s ( 1) and remo v e th e lamp housing.
7 1. Press the lamp hous i ng t o the front , against the force o f the s p ring, and remove. 2. Repla ce the bulb, W5W - 12V 5W 3. Install the bulb sock et. Retainin g screw s ( 1) Bulb socket (2) 1. Ta ke ou t the ret ai nin g s crew s ( 1) and remo v e th e lamp housing.
1. Alig n a scre wdriver on th e reta ining spr ing, pr ess it in an d pry t he lamp housing o ut. 2. Repla ce the bulb, K – 12V 1 8W 3. Install the lam p housing. 1. Use a screwdriv er on the catch spr ing to pr es s in and rem ove the bu lb housing .
7 1. Use a s cre wdri ver on th e catc h sprin g, remo ve the bulb h ousin g. 2. Turn the bulb holder with the bul b in the di rection o f t h e arro w and remo ve i t. 3. Replace the bulb h older and bulb, K – 12V 6 W 4. Install the lam p housing. Lamp housing (1) Cable connect or (2) B ulb holder (3) 1.
Engine with o i l filt er Eng ine oil Fuel tank Cooling system Windshield washer sy ste m Inclu ding res erve fu el All v ehicl es a bout 9.5 U S qt (9.0 l) about 26.4 US gal (100 l ) abo u t 2. 8 U S g al ( 10.5 l ) about 2.7 U S ga l (10.0 l) about 7.
7 Componen t Reco mmended Flu id Brake Use br ake fluid approved to MB 33 1.0, or a DOT 4 brake flui d with: minimu m dry boilin g point (ERBP) 500°F , minimum wet boiling point (WERBP) 35 6°F , maximum viscos ity 1500 mm 2 /s, c onfo rmi ng to FM VS S 1 16 and ISO 4925.
.
CONTENTS 8 M A I N T E N A N C E S C H E D U L E S Int ro duc ti on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 48 War ra nt y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 8 Mainte nance - Witho ut ASS YST M aint enance Com p ut er .
M A I N T E N A N C E S C H E D U L E S 8 Th is is intende d as a guide to the service requ iremen ts of y ou r ve hic l e. It cont ains all nec essary instruc tions conce rning service inter vals an d op eratio ns w hich hav e t o be car rie d ou t.
8 M A I N T E N A N C E S C H E D U L E S Th e use of S peci al lub ricant additiv es is no t re commende d. The us e of suc h additi ves may aff ec t your warr anty rights .
M A I N T E N A N C E S C H E D U L E S 8 ASSYST pr ovides you with infor m ation on the best possible timing for m aint enance work. NOT E: The engine m anufacturer strong ly re commen ds t he u se of s ynthet ic eng i ne oi ls, su ch as Mobil 1 SAE 0W-40.
8 M A I N T E N A N C E S C H E D U L E S If bodies built by manufacturers other than Da imle rChry s ler Co rpo rat ion are fi tte d to the veh icl e, the maintenance r equi rem ents and lubrication intervals specified by the body manufacturer must be adhered to, in additi on to all st andard maintenance requirements.
M A I N T E N A N C E S C H E D U L E S 8 Oil cha nge Eng ine: Oil change and filter repl acement Check fluid levels of the following system, refill as ne ce ssa ry .
8 M A I N T E N A N C E S C H E D U L E S Check fluid levels for the foll owing s ystems , correct as necess ary. Shoul d there b e a loss o f fluid wh ic h cann ot be explai ned by regular use, trac e a nd e liminate the cause. En gine coo ling syst em Check corr osion inhibito r/antifreeze , refill as necess ary.
M A I N T E N A N C E S C H E D U L E S 8 Automa tic transmission once onl y at 80,000 miles/ 128000k m Oil an d filt er change Du ring every se con d ma inte nanc e ser vice Ai r clea ner wi thout ma.
9 CONTENTS Sugges tions F or Obtain ing Service F or You r V eh i cle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 6 Pr ep are fo r the A pp oin tm ent . . . . . . . . . . . . . . 2 5 6 Pr ep are a Lis t . . . . . . . . . . . . . . .
I f y ou ’ re h av i ng w a rr an ty wo rk d on e , b e s ur e t o ha ve the right paper s with y ou. Take your warran ty folder. All work t o be perfor med may no t be covered by the warr anty, d isc uss addit ional ch arges wi th t h e s ervice manager.
9 • If fo r som e reaso n you are s till n ot sati sfied, ta lk to the g en e ral manage r or owner of the deal ershi p. The y want to kn ow i f you nee d a ssistan ce. • If yo ur dealers hip is una ble to resolve t he conc ern, you may contact t he Manufacturer’s C ustomer Cent er.
S e rv i ce Co nt ra c t Yo u ma y h ave pu rchase d a servic e con tract for your vehicle to help pr o tect you from the high c ost of unexpected repairs aft er your manufacturer’s new vehicle limit ed w arrant y expires. The m anufactur er stands behind only the m anufacturer ’s Service Con tracts.
9 See your manufacturer’s W arranty Information Book let for i nfor mation on you r wa rranty cove rage and trans fer of warra nty. Mopar flui ds, l ubr icant s, pa rts, and ac ces sori es a r e availab le from yo ur dea ler. They w ill he lp you kee p your vehicle operating at its b e s t.
.
10 A Special Note Concerning Vehicle Alterat i on . . . . 184 Ac cele r atio n Sk id Cont ro l . . . . . . . . . . . . . . . . . . . . . 1 55 De act ivat in g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 59 Indi ca tor L am p . . . .
Anti-Lock Brake System (AB S) Indicator Lamp . . . 152 Appearan ce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 Ar mr est . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 As ht ray . . . . . . .
10 Se rvi ce Brak e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4 6 Bulbs Bulb R ep la cem en t . . . . . . . . . . . . . . . . . . . . . . . . . . 2 33 Fro nt La mp Un i t . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Cap aci tie s .
Cleani ng Cup Ho ld er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 24 Har d Pla sti c Tr im It em s . . . . . . . . . . . . . . . . . . . . . 2 25 Ins tr um ent Clu st er . . . . . . . . . . . . . . . . . . . . . . . . . 2 24 Ligh t All oy W h eel s .
10 Fuse, Relay, an d Diode A ssignmen ts - Optio nal Eq uip me nt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 31 Re lay Assi gnm en t, St and ar d Equ ip men t . . . . . . 2 30 Sta nd ard Fu se and R el ay E qu ipm e nt . . . . .
Fue l Tan k Cap acit y . . . . . . . . . . . . . . . . . . . . . . . . . 173 Re fu elin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 72 Fus e a nd R ela y O pt ion al Eq uip m ent . . . . . . . . . . . . 2 30 Fuse, Relay, an d Diode A ssignmen ts - Optio nal Eq uip me nt .
10 Int eri or Ligh ti n g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Car go Ar ea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Driver and Rea r -Seat P assenger / Cargo A rea . . . 63 Int eri or S enso r Pr ote cti on .
Lock , I g nit ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Lock i ng, Cen tr al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Lum ba r Sup po rt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Ov erh eat ing ( Air H ea ter ) . . . . . . . . . . . . . . . . . . . . . . 1 31 Ov erh eat ing ( Wat er He at er) . . . . . . . . . . . . . . . . . . . 1 31 Pa sse nge r C omp ar tm en t P rot ect io n . . . . . . . . . . . . . . 2 1 Ala r m P us hbu tto n .
Seats Ad jus tme n t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Ar mr est . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 Dri ve r’s a nd Fr on t Pa sse nge r ’s S ea t. . . . . . . . . . . . 54 Fo ldin g Se at .
10 Tie Do wn R ings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 Tir e G ri p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 65 Tir e Pr e ssu re T abl e . . . . . . . . . . . . . . . . . . . . . . . . .
Us ing th e Ja ck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 93 Ve hic le / En g ine E miss io n L ab el . . . . . . . . . . . . . . . . . 6 Ve hic le Al ter ati on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 Ve hic le and T ra iler W ei ght s .
Ein wichtiger Punkt beim Kauf des Geräts Dodge 2004 Sprinter (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dodge 2004 Sprinter noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dodge 2004 Sprinter - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dodge 2004 Sprinter reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dodge 2004 Sprinter erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dodge 2004 Sprinter besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dodge 2004 Sprinter verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dodge 2004 Sprinter. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dodge 2004 Sprinter gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
