Benutzeranleitung / Produktwartung DN-16061-1 des Produzenten Digitus
Zur Seite of 32
ADV ANCED NETWORK SUR VEILLANCE CAMERA User Manual Please read instruct ions thoroughl y before operation and retain it for future reference..
IMPORT ANT SAFEGU ARD All lead-fre e products off ered by the company comply with the requirement s of the European law on the Restricti on of Hazardous Substan ces (RoHS) directive, which means our manufactu re processes and products are strict ly “lead-free” and without the hazardou s substances cited i n the dir ective.
T ABLE OF CONTENTS 1. OVERVIEW ................. ................ ..................... .................... ................ ..................... ................ ........ .. 1 1.1 Produc t Features ................. ............................ ...
1 1. O VERVIEW 1.1 Product Features Low-latency video streaming with H.264 compre ssion format for sharp and clear images Support s Wireless function with an optio nal Wireless dongle 1/3.
2 1.4 Rear Panel CONNECTOR / BUTTON DESCRIPTION Reset Default This button is hidden in the pinhole. Press and ho ld the reset button until the network camera reboote d. This will reset all parameters, including the IP address to factory default settings.
3 2. BEFORE USING THE NETW ORK CAMERA Before using the network camera, make sure: 1) Y ou have installed the supplied CMS software, “Video V iewer”. 2) Y ou have configured the network settings, and the network connection is fine. If not, please refer to your the installation guide.
4 3. ACCESSING THE CAMERA VIA VIDEO VI EWER 3.1 Install the sof tware Step1: Place the supplied CD into your CD-RO M or DVD-ROM drive. The program will be automatically run.
5 3.3 Control panel overview T wo control panels are available and can be switched depen ding on your using habit. 3.3.1 Simplified Version (Default).
6 3.3.2 Full Function Version 3.3.3 Main Button Overview Button Function Description Simplified Full Function Address Book Click to show the predefined IP address(es). You can add, remove or search the IP address to log in the DVR remotely. Miscellaneous Control Remote Config Click to go to the detailed system configuration.
7 3.4 Frequently-used functions 3.4.1 Record T o record remotely , click “ ” or “ ” → “ ” to go to the “Record Setting” page. In the “Record Setting” page, you can set the follow.
8 3.4.3 Firmware Upgrade This function is used when users need to upgrade the network camera for function scalability . Note: Before using this function, make sure you have the correct upgr ade files provided by your installer or distributor . S tep1: Click “ ”, and select the IP address of your network camera in the address book.
9 STEP2: Right-click to show the shortcut menu on the top-le ft panel, and select the E-M ap group you want to add. There are three E-Map groups you can add: G oogle E-MAP , Single E-MAP , and Building E-MAP .
10 STEP3: When the E-Map group is created, you will see th e tree on the top-left panel, show ing all the devices you’ve added to this group. Icon Description The connected device is ca mera. When it’s selected, it will become red. The connected device is D VR.
11 How to Edit / Remove an Existing E-Map Group For Google E-Map Group Right-click on the group name to show the sho rtcut menu list, and select “Edit E-MAP” or “Rem ove E-MAP” as needed. Y ou can also add a single E-Map group (Ad d Single E-MAP) or Buil ding E-Map group (Add Bui lding E-MAP) into the existin g Google E-Map group.
12 For Building E-Map Group Right-click on the group name to show the sho rtcut menu list, and select “Edit Building E-MAP” or “Remove E-MAP” as needed.
13 4. SY STEM CONFIGURA TION Before using the network camera, make sure you have installed the supplied software, “V ideo Viewer”, and configure network settings. If not, please refer to “3.1 Install the softw are” at page 4 or your inst aller .
14 4.1 General In “General”, you can check the general information for your network camera, such as the firmware version and MAC address, and also modify the identification name of your camera (up to 15 alphanumeric characters).
15 Column Description User Name Set a user name that will be used for camera access. The user name allows up to 16 alphanum eric characters. Password Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters.
16 4.1.3 OnLineUser Y ou can check the current online user(s) with resp ective online information. T o refresh the list, click “Refresh ”. 4.1.4 Trigger Y ou can set the motion or alarm detection and select the notification function. Trigger Setting In this section, you can select to enable or disable the alarm or motion detection.
17 Notification Setting In this section, you can select to enable E- mail and/or FTP notification when an alarm or a motion happened. Item Descripti on Method ‧ Email When this option is checked, the network camera will upload the captured video clip to the ass igned E-mail address(s) once motion or alarm recording happened.
18 e) Click “Apply”, and click “O K” to exit the setting page. For DHCP: a) Finish the DHCP router set ting. Get a router and connect it to the Internet via your PC ( with Static IP or PPPoE setting). There are different sett ing methods for diff erent routers.
19 Check “QoS Enable”, and set the max. upload rate from 256 to 10240 kbps. 4.2.2 SNTP SNTP (Simple Network T ime Protocol) is used to synchronize your camera time with the networked computer systems.
20 Function Description Server Enter the SMTP server address provided from your e-mail system supplier . Mail From Enter the entire mail address to ensure E-mails will not be blocked by SMTP . V erify Password Some mail servers are required to verify the password.
21 When this function is activated, the other PC within the same domain as this camera w ill be able to search this camera in “Network Neighbor” with the identification name set in “Friendl y name”. Double-click it to quickly open the web browser for camera access.
22 4.5 Time Set daylight saving time and the current time. Function Descriptio n Daylight Saving S pecify whether to use daylight saving tim e (ON / OFF). If this function is enabled, set the time period (ST ART / END), and adjust the daylight saving time in hours (ADJUST).
23 5. ACCESSING THE CAMERA VIA WEB BR OWSER Users can also access the netw ork camera via a web br owser , such as Microsoft Internet Explorer or Mozilla F irefox.
24 5.2 Control panel overview 5.2.1 Live View Panel Function Icon User Level Description Media T ype -- Supervisor / Power User / Normal User / Guest Select the web transmission format from the drop-down list: H.264 / MPEG-4 / Motion JPEG / QuickTi me For users using Mozilla Firefox, only “QuickTime” is selectable.
25 Main Menu Sub -menu Reference Network Network Remote Config Network QoS Remote Config Network QoS Wireless For details, please refer to “APPENDIX 2” in the installation guide.
26 5.3 Video recording directly to USB flash drive Besides recording remotely , this network camera also supports local recordin g directly to a USB flash drive when a compatible USB flash drive is inserted to the camera and detected corre ctly . 5.3.
27 5.3.4 Recorded Data Playback and Download Click “Playback” to enter the pl ayback p anel where you can search or select the event you want to play and download to your PC simultaneously .
28 APPENDIX 1 SPECIFICA TIONS Standard Res. Model High Res. Model ▓ Network LAN Por t YES LAN Speed 10/100 Based-T Ethernet Supported Protoco ls DDNS, DNS , PPPoE, DHCP , NTP , SNTP , TCP/IP ,UDP ICMP , SMTP , FTP , HTTP , R TP , RTSP USB Port For optional wireless don gle & USB flash drive Wireless Features ( optional) (1) Supports 802.
29 APPENDIX 2 COMP A TIBLE USB FLASH DRIVE LIST MANUF ACTURER MODEL CAP ACITY Transcend JFV35 4G JFV3 0 8G Kingston DataT raveler 1G PQI U172P 4G Apacer AH320 2GB AH320A 8GB AH220 1GB AH320 4GB A-data.
Ein wichtiger Punkt beim Kauf des Geräts Digitus DN-16061-1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Digitus DN-16061-1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Digitus DN-16061-1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Digitus DN-16061-1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Digitus DN-16061-1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Digitus DN-16061-1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Digitus DN-16061-1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Digitus DN-16061-1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Digitus DN-16061-1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
