Benutzeranleitung / Produktwartung GW-300R des Produzenten AirLive
Zur Seite of 94
Copyright and Disclaimer AirLive GW-300R User ’ s Manual 1 GW-300R Wireless 2T2R 300Mbp s Giga Router Use r ’ s Manual.
Copyright and Disclaimer AirLive GW-300R User ’ s Manual Copyright & Disclaimer The contents of this publicati on may not be reproduced in any p a rt or as a whole, stored, transcribed in an inf.
Copyright and Disclaimer AirLive GW-300R User ’ s Manual CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic comp atibility , EN 55022/A1 Class B. The specification is subject to change without notice.
T able of Contents AirLive GW-300R User ’ s Manual T able of Content s 1.Introduction ........................................................................................................................ 1 1.1 Packing List .......................
1. Introduction AirLive GW-300R User ’ s Manual 1 1 1. Introduction Congratulations on your purchase of this outst anding Wireless Broadband Router .
1. Introduction AirLive GW-300R User ’ s Manual 2 1.1 Packing List items Description Contents Quantity 1 WiFi Gigabit Router 1 2 Power adapter 12V 1A 1 3 CD 1.
1. Introduction AirLive GW-300R User ’ s Manual 3 1.2 S pec Summary T able Device Interface Ethernet W AN RJ-45 port, 10/100/1000Mbps, auto-MDI/MDIX 1 Ethernet LAN RJ-45 port, 10/ 100/1000Mbps, auto.
1. Introduction AirLive GW-300R User ’ s Manual 4 Environment & Certification Package dimension (mm) Package Information Package weight (g) Operation T emp.
1. Introduction AirLive GW-300R User ’ s Manual 5 1.4 LED indicators LED status Description S tatus Green in flash Device status is working. Green RJ45 cable is plugged WA N L E D Green in flash Dat.
1. Introduction AirLive GW-300R User ’ s Manual 6 1.5 Procedure for Hardware Inst allation S tep 1. Attach the antenna. 1.1. Remove the antenna from its plastic wrapper . 1.2. Screw the antenna in a clockwise direction to the back panel of the unit.
1. Introduction AirLive GW-300R User ’ s Manual 7 S tep 3 Insert the Ethernet patch cable into Wired W AN port: Insert the Ethernet patch cable form DSL Modem into Wired WAN port on the back panel of Router . S tep 4. Power on Router: 4.1. Connect the power adapter to the receptor on the back panel of your Router and Push Power switch S tep 5.
2. Getting S tart AirLive GW-300R User ’ s Manual 8 2 2. Getting S t art Insert the CD into CD reader on your PC. The program, AutoRun, will be executed automatically . And then you can click t he Easy setup Icon for this utility . Configure the settings by the following steps.
2. Getting S tart AirLive GW-300R User ’ s Manual 9 2.2 Setup mode Y ou can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router . 2.3 Advanced mode Setup. Check the PC, Router or Internet icons for the S tatus of PC, Router or Internet.
2. Getting S tart AirLive GW-300R User ’ s Manual 10 2.4 Quick Wizard Inst all mode Setup 1. Make sure the router is powered on. 2. Make sure your network adapter is connected to the LAN port of the router 3. Make sure your network adapter has an IP address.
2. Getting S tart AirLive GW-300R User ’ s Manual 11 2.6 Auto Detect W AN Service. Click “Next” for continue. Click the button, “Let me select W AN service by myself”, to disable this function. Note: The Item support s to detect the Dynamic and PPPoE W AN Services only Example, the Dynamic W AN type is detected.
2. Getting S tart AirLive GW-300R User ’ s Manual 12 2.7. Manual select W AN Service In the manual mode, Click the any icons for continues. 2.8 Summary of the settings and Next to “Reboot” Click “Next” for continue. 2.9 Apply the Settings or Modify .
2. Getting S tart AirLive GW-300R User ’ s Manual 13 2.10 T est the Internet connection. T est W AN Networking service. Click “Next” for continue. Y ou can ignore the by select the “Ignore T est”. 2.1 1 Setup Completed. The EzSetup is finish, you can open the default web browser to configure advanced settings of the Router .
3. Making Configuration AirLive GW-300R User ’ s Manual 14 3 3. Making Configuration This product provides Web based configuration scheme, that is, configuring by your We b browser , such as Mozilla Firefox or or In ternet Explorer . This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms.
3. Making Configuration AirLive GW-300R User ’ s Manual 15 3.1 Login to Configure from Wizard T ype in the IP Address (http://192.168.1.254) T ype password, the default is “airlive” and click ‘login’ button. Press “Wizard” for basic settings with simple way .
3. Making Configuration AirLive GW-300R User ’ s Manual 16 S tep 1: Set up your system password. S tep 2: Select W an T ype. Auto Detecting or Setup Manually .
3. Making Configuration AirLive GW-300R User ’ s Manual 17 S tep 3: Setup the LAN IP and W AN T ype. S tep 4: Please fill in PPPoE service information which is provided by your ISP .
3. Making Configuration AirLive GW-300R User ’ s Manual 18 Set up your Authentication and Encryption. S tep 6: Then click Apply Setting. And then the device will reboot.
3. Making Configuration AirLive GW-300R User ’ s Manual 19 3.2 System St atus This option provides the function for observing this product’ s working status: W AN Port S tatus. If the W AN port is assigned a dy namic IP , ther e may appear a “Renew” or “Release” button on the Sidenote column.
3. Making Configuration AirLive GW-300R User ’ s Manual 20 3.3 Advanced 3.3.1 Basic Setting Please Select “Advanced Setup” to Setup.
3. Making Configuration AirLive GW-300R User ’ s Manual 21 3.3.1.1 Primary Setup – WA N Type, Virtual Computers Press “Change” This option is primary to enable this product to work properly . The setting items and the web appearance depend on the W AN type.
3. Making Configuration AirLive GW-300R User ’ s Manual 22 S tatic IP Address: ISP assi gns you a st atic IP address: W AN IP Address, Subnet Mask, Gateway , Pr imary and Secondary DNS : enter the proper setting provided by your ISP . Dynamic IP Address: Obtain an IP address from ISP automatically .
3. Making Configuration AirLive GW-300R User ’ s Manual 23 PPP over Ethernet: Some ISPs require t he use of PPPoE to connect to their services. PPPoE Account and Password: the account and password your ISP assigned to you. For security , this fiel d appears blank.
3. Making Configuration AirLive GW-300R User ’ s Manual 24 PPTP: Some ISPs require the use of PPTP to connect to their services First, Please check your ISP assigned and Select S tatic IP Address or Dynamic IP Address. 1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
3. Making Configuration AirLive GW-300R User ’ s Manual 25 L2TP: Some ISPs require the use of L2TP to connect to their services First, Please check your ISP assigned and Select S tatic IP Address or Dynamic IP Address. For example: Use S tatic 1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
3. Making Configuration AirLive GW-300R User ’ s Manual 26 Connection Control: There are 3 modes to select: Connect-on-demand: The device will link up with ISP when the clients send outgoing packet s. Auto-Reconnect(Always-on):The device will link with ISP until the connection is established.
3. Making Configuration AirLive GW-300R User ’ s Manual 27 irtual Computers(Only for S tatic and dynamic IP address Wan type) V irtual Computer enables you to use the origin al NA T feature, and allows you to setup the ding to the global IP nable: Check this item to enable the V irtual Computer feature.
3. Making Configuration AirLive GW-300R User ’ s Manual 28 .3.1.2 DHCP Server 3 ress “More>>” oose “Disable” or “Enable.” lient may use the IP address it has been pool starting Addr ess: Whenever there is a request, the DHCP s in Name: Optional, this information will be p assed to the client.
3. Making Configuration AirLive GW-300R User ’ s Manual 29 HCP Client List: D .3.1.3 Wireless 3 ireless settings allow you to set the wireless confi guration items. ireless On/Off by time Schedule: The device can turn off Wireless depend as Schedule.
3. Making Configuration AirLive GW-300R User ’ s Manual 30 SID Broadcast: The router will Broadcast beacons that have some information, including hannel: The radio channel number .
3. Making Configuration AirLive GW-300R User ’ s Manual 31 ecurity: Select the data privacy algorithm y ou want. Enabling the security can protect your here are several security types to use: EP : u enable the 128 or 64 bit WEP key security , please select one WEP key to be ox was used to switch the function of the 802.
3. Making Configuration AirLive GW-300R User ’ s Manual 32 WP A-PSK . Select Encryption and Pre-share Key Mode you select HEX, you have to fill in 64 hex adecimal (0, 1, 2…8, 9, A, B…F) digits ASCII, the length of pre-s hare key is from 8 to 63.
3. Making Configuration AirLive GW-300R User ’ s Manual 33 . Fill in the key , Ex 12345678 2 P A Box was used to switch the function of the WP A. When the WP A function is enabled, ecimal (0, 1, 2…8, 9, A, B…F) digits ter .
3. Making Configuration AirLive GW-300R User ’ s Manual 34 P A2(AES) s used to switch the function of the WP A. When the WP A function is enabled, ss or the 802.1X server ’s domain-name. o fill in 64 hex adecimal (0, 1, 2…8, 9, A, B…F) digits ter .
3. Making Configuration AirLive GW-300R User ’ s Manual 35 P A/WP A2 as used to switch the function of the WP A. When the WP A function is enabled, ter will detect autom atically which Security type(Wpa- p sk version 1 or 2) the client 802.1X server ’s domain-name.
3. Making Configuration AirLive GW-300R User ’ s Manual 36 .3.2 Forwarding Rules 3 .3.2.1 Virtual Server 3.
3. Making Configuration AirLive GW-300R User ’ s Manual 37 his product’ s NA T firewall filters out unrecogni zed packets to protect your Intranet, so al l to this port will be redirected , .3.2.2 Special AP T hosts behind this product are invisible to the out side world.
3. Making Configuration AirLive GW-300R User ’ s Manual 38 .3.2.3 Miscellaneous Items 3 Address of DMZ Host ) Host is a host wit hout the protection of firewall.
3. Making Configuration AirLive GW-300R User ’ s Manual 39 pnP Setting o supports this function.If t he OS support s this function enable it,like U The device als Windows Xp.
3. Making Configuration AirLive GW-300R User ’ s Manual 40 .3.3.1 Packet Filters 3 acket Filter enables you to control what packe ts are allowed to p ass the router . Outbound pass except thos e match the specified rules tbound. For each rule, you can th.
3. Making Configuration AirLive GW-300R User ’ s Manual 41 or source or destination IP address, you c an define a single IP address (4.3.2.1) or a rts 0, U53, d Packet Filter click the che ck box next to Enable in the Inbound Packet u have SMTP Server (25), POP Server (1 10), Web Server (80), FTP Server F range of IP addresses (4.
3. Making Configuration AirLive GW-300R User ’ s Manual 42 xample 2: E .2.3.100-1.2.3.1 19) Remote hosts can do ev erything except read net news (port 1 19) and fter Inbound Packet Filter setting is c onfigured, click the save button.
3. Making Configuration AirLive GW-300R User ’ s Manual 43 xample 1: IP is 192.168.12.254 E Router LAN 92.168.12.100-192.168.12. 149) Located hosts are only allow ed to send mail (port 25), 92.
3. Making Configuration AirLive GW-300R User ’ s Manual 44 xample 2: IP is 192.168.12.254 E Router LAN (192.168.12.100 and 192.168.12.1 19) Located Hosts can do everything except read net thers are allowed fter Outbound Packet Filter setting is configured, click the save button.
3. Making Configuration AirLive GW-300R User ’ s Manual 45 .3.3.2 Domain filters 3 Domain Filter users under this devic e from accessing specific URLs. nable Domain Filter . t to log the action w hen someone accesses the specific URLs. ivilege these hosts to access network without restriction.
3. Making Configuration AirLive GW-300R User ’ s Manual 46 xample: E In this example: w .msn.com” will be blocked, and the action will be record in log-file. e. URL includ e “ww URL includ e “www .sin a.com” will not be blocked, but the action will be record in log-fil URL includ e “www .
3. Making Configuration AirLive GW-300R User ’ s Manual 47 .3.3.3 URL Blocking 3 RL Block ing will block LAN computers to connect to pre-defined Websites.
3. Making Configuration AirLive GW-300R User ’ s Manual 48 In this example: sn” will be blocked, and the action will be record in log-file. .3.3.4 Internet Access Control he device provides ".
3. Making Configuration AirLive GW-300R User ’ s Manual 49 This device can record 3 sets. When the host(should be admin) logins W eb management, the device will record MAC address of this host. Before this host configures Internet Access Control , Suggest end-user to en able this feature, first.
3. Making Configuration AirLive GW-300R User ’ s Manual 50 deny the clients, whose MAC addresses are not in the "Control t able" (please see below), to connect to this device. Association control Check "Assoc iation control" to enable the controlling of which wireless client can associate to the wireless LAN.
3. Making Configuration AirLive GW-300R User ’ s Manual 51 In this page, we provide the following Com bobox and button to help you to input the MAC address.
3. Making Configuration AirLive GW-300R User ’ s Manual 52 3."Association control" is enabled, and all of the wireless clients not listed in the "Control table" are "denied" to associ ate to the wireless LAN.
3. Making Configuration AirLive GW-300R User ’ s Manual 53 le, For examp Schedule Rule 1 sets “always” everyday with limitation..
3. Making Configuration AirLive GW-300R User ’ s Manual 54 Interface Access Control The device defines 5 Interfaces as Lan1,Lan2, Lan3,Lan4 and WiFi. The device allows different interface to a ccess Internet by time schedule For example, Schedule Rule 1 set s “always” everyday with limitation.
3. Making Configuration AirLive GW-300R User ’ s Manual 55 3.3.3.5 Miscellaneous Items Remote Administrator Host/Port In general, only Intranet user can browse the bu ilt-in web pages to perform administration task. This feature enables you to perform admini stration task from remote host.
3. Making Configuration AirLive GW-300R User ’ s Manual 56 VPN IPSec Pass-Through It is a setting/feature on routers which is r equired to implement secure exchange of packet s at the IP layer and allow IPSec tunn els to pass through the router .
3. Making Configuration AirLive GW-300R User ’ s Manual 57 .1 System Time 3.3.4 Get Date and T ime by NTP Protocol Selected if you want to Get Date and T ime by NTP Protocol. T ime Server Select a NTP time server to consult UTC time ime Zone elect a time zone where this device locates.
3. Making Configuration AirLive GW-300R User ’ s Manual 58 3.3.4.2 System Log This page support two methods to export system l ogs to specific destination by means of ve to setup including: or Syslog t to. unction. mail alert (send syslog via email).
3. Making Configuration AirLive GW-300R User ’ s Manual 59 3.3.4.3 DDNS Service T o host your server on a changing IP addre ss, you have to use dynamic domain name service (DDNS). So that anyone wishing to reach your host on ly needs to know the name of it.
3. Making Configuration AirLive GW-300R User ’ s Manual 60 3.3.4.4 SNMP In brief, SNMP , the Simple Network Management Pr otocol, is a protocol designed to give a user the capability to remotely manage a com puter network by polling and setting terminal check Local, Remote or both to enabl e SNMP function.
3. Making Configuration AirLive GW-300R User ’ s Manual 61 3.3.4.5 Routing Routing T a bles allow you to determine which physical interface address to use for outgoi IP data grams.
3. Making Configuration AirLive GW-300R User ’ s Manual 62 Example: Configuration on NA T Router Destination SubnetMask Gateway Hop Enabled ram to 192.168.0.2, it would use fter routing t able setting is conf igured, click the save button. 192.168.3.
3. Making Configuration AirLive GW-300R User ’ s Manual 63 3.3.4.6 Schedule Rule Y ou can set the schedule time to decide which se rvice will be turned on or off.
3. Making Configuration AirLive GW-300R User ’ s Manual 64 Schedule Enable Selected if you want to Enable the Scheduler . Edit T o edit the schedule rule. Delete T o delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically .
3. Making Configuration AirLive GW-300R User ’ s Manual 65 tp time: everyday 14:20 to 16:30). Exanple2: Packet Filter – Apply Rule#1 (f.
3. Making Configuration AirLive GW-300R User ’ s Manual 66 3.3.4.7 QoS Rule ocal IP: lease input Client IP ,ex192.168.1.161. emote Priority: lease input Global IP and port,ex:168.
3. Making Configuration AirLive GW-300R User ’ s Manual 67 3.3.5 T oolbox 3.3.5.1 View Log Y ou can View system log by clicking the View Log button.
3. Making Configuration AirLive GW-300R User ’ s Manual 68 3.3.5.2 Firmware Upgrade Y ou can upgrade firmware by clicking Firmware Upgr ade button. 3.3.5.3 Backup Setting Y ou can backup your settings by clicking the Ba ckup Setting button and save it as a bin file.
3. Making Configuration AirLive GW-300R User ’ s Manual 69 3.3.5.5 Reboot Y ou can also reboot this product by clicking the Reboot button. 3.3.5.6 Miscellaneous Items MAC Address for W ake-on-LAN W ake-on-LAN is a technology that enables you to power up a networked dev ice remotely .
Appendices and Index AirLive GW-300R User ’ s Manual 70 Appendices and Index 802.1x Setting 1 Equipment Details Figure 1: T esting Environment (Use Windows 2000 Radius Server) PC1: icrosoft Windows XP Professio nal without Service Pack 1. river version: 1.
Appendices and Index AirLive GW-300R User ’ s Manual 71 DUT Configuration: Enable DHCP serv AN setting: static IP address. 168.1.254/24. . et RADIUS server shared key .
Appendices and Index AirLive GW-300R User ’ s Manual 72 ge EAP type to fit the variable test condition. 4. We will chan Figure 2: Enable IEEE 802.1X access control e properties . Windows 2000 RADIUS serve r Authentication testing: Figure 3: Smart card or certificat 4 4.
Appendices and Index AirLive GW-300R User ’ s Manual 73 T erminate the test steps when PC1 get dynamic IP and PING remote host successfully . Figure 4: Certificate information on PC1.
Appendices and Index AirLive GW-300R User ’ s Manual 74 igure 5: Authenticating F Figure 6: Authentication success 4.2 DUT authenticate PC 2 using PEAP-TLS. PC2 choose the SSID of DUT as the Access Point. Set authentication type of wireless cli ent and RADIUS server both to PEAP_TLS.
Appendices and Index AirLive GW-300R User ’ s Manual 75 WP A Settings Wireless Router: LAN IP: 192.168.1.254 W AN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:T i-1 1g T ool: Odyssey Client Manager Refer to: HH H mU Uwww .
Appendices and Index AirLive GW-300R User ’ s Manual 76 or this function, we need the server to aut henticate. This function is like 802.1x. WP A: F The above is our environment: get certificate from Radius, first. Method 1: 1. The UserA or UserB have to HH Uhttp://192.
Appendices and Index AirLive GW-300R User ’ s Manual 77 4. Go to Odyssey Client Manager , choose “P rofiles” and Setup Profile name as “1”.
Appendices and Index AirLive GW-300R User ’ s Manual 78 ogin name and passwd are fae1 and fae1. Remember that you get certific ate from Radius in S tep1.
Appendices and Index AirLive GW-300R User ’ s Manual 79 nd Add EAP/TL S again. 6. Then go to Authentication and first Remove EAP/ TLS a.
Appendices and Index AirLive GW-300R User ’ s Manual 80 . Go “Network” and Select “1” and ok 7.
Appendices and Index AirLive GW-300R User ’ s Manual 81 k. successfully , the wireless client has to aut henticate with Radius Server , like below: 8.
Appendices and Index AirLive GW-300R User ’ s Manual 82 HH Uhttp://192.168.122.1/certsrvU Method 2: 1. The UserA or UserB have to get certificate from Radius,first.
Appendices and Index AirLive GW-300R User ’ s Manual 83 etworks” like below: hoose “123kk” ssCA and Enable” in T rusted root cert ificate authority: Client: Go to “Network Connection” and select wireless adapter .
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 84 hooting What can I do when I have some trouble at the first time? 1. Why can I not configure the router even if the cable is pl ugged in the ports of Router and F AQ and T roubles the led is also light? A: First, make sure that which port is pl ugged.
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 85 yes, please execute Browser , like Mo zilla and key 192.168.1.254 in address. If not, please ip If config /rel ease, then ipconfig /renew . Whatever I setup, the pc c an not get ip. Please check S t atus Led and refer to the Q2: 2.
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 86 rt and Lan 4.Why can I not connect Inter net even though the cables are plugged in W an po port and the leds are blink.
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 87 .How to start to use wireless? How do I connect router by using wireless? 1 sure that you already install ed wireless client device in your computer . Then A: First, make check the Configuration of wireless router .
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 88 Choose the one that you will want to connect and Connect: If successfully , the computer will show and get ip from router:.
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 89 2.When I use AES encryption of WP A-PSK to connec t even if I input the correct pre-share key? A: First, you must check if the driver of wireless client support s AES encryption.
F AQ and T roubles hooting AirLive GW-300R User ’ s Manual 90 3. When I use wireless to connect the router , but I find the signal is very low even if I am close to the router? hat the problem is. A: Please check if the wireless c lient is normal, first.
Ein wichtiger Punkt beim Kauf des Geräts AirLive GW-300R (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AirLive GW-300R noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AirLive GW-300R - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AirLive GW-300R reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AirLive GW-300R erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AirLive GW-300R besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AirLive GW-300R verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AirLive GW-300R. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AirLive GW-300R gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
