Benutzeranleitung / Produktwartung AWLL3055 des Produzenten Airlink101
Zur Seite of 27
802.1 1g USB Adapter with +10dBi Antenna Model # A WLL3055 User ’ s Manual Ve r. 1 A.
2 T able of Contents 1. I NTRO DUCTION ..................... ................... .................. ..................... ................... 4 1.1 Featu res ................... .........................................................................
3 Interference S tatement This equipment has been tested and found to comply with the limits for a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These limit s are designed to provide reasonable protection a g ainst har mful interference in a residential inst allation.
4 1. Introduction The 802.11g USB 2.0 Adapter with +10dBi Patch Antenna (hereafter called USB adapter), compliant with IEEE 802.11b/g, is a hig h-efficiency wireless adapter for wireless networking at home, in office, or in public places.
5 2. Installation Procedures 2.1 Install Utility Software Note: Before instal ling the utility so ftware, DO NOT insert the USB adapter into your computer. If the adapter is ins ert e d already, Windows will detect the adapter and request for a driver.
6 St ep 3 Cli ck Next at the welc ome screen. St ep 4 Cli ck Next t o accept the default destination location for the drive r to be installed in or click Browse to select t he desired locati on.
7 Step 5 For Windows XP, click Continue Anywa y at t h e Windo ws Logo Compatibility screen. For Windows 2000, click Ye s at the Digital Sig nature screen. St ep 6 Remove the Driver & Utility CD from your CD driv e and then rest art your comp uter .
8 2.2 Install Driver Note: In mos t cases, Windows will automatica lly install the driver after the computer is restarted. If the Found New Hardwar e W iza rd appe a rs, follow the instructions b e low. The Found New Hardware Wizard will look d ifferent depending on yo ur operat i ng system.
9 For Windows 2000, click Yes at the Di gital S ig nature scree n. For Windows 98SE or ME, insert the Windows 98SE or ME CD if pro m pted to do so and click OK .
10 Note to Windo w s XP Users: If you encounter the Wireless Zero Configur at io n dial o g box , clic k Yes to enable the Wireless LAN Utility to configure you r USB adapter. Step 1 Sele ct the SSID of your wireless router/acce ss point from the Avai lable Network list and click on the Con nect this site button.
11 Step 2 Verify that the adapter has adequate Signal Strength and Link Quality and then restart the computer. Mode : Select from Sta tio n or Acce ss Point . For more information re gar d ing Access Point, please refer to the next section, 4. Configuring USB Ad apter as an Access Point.
12 Curr ent Netwo r k Infor mation : Displays the network information of the wireless router/access point that the USB adapter is currently connected to. More Setting : Click on this button to access the USB adapter ’ s configuration settings, including WEP and WP A encryption settings.
13 3.1 Conf iguring General Sett ings Click Cha nge to configure the adapter ’s General Connection Setting . Chann el : This setting is for Acc ess Point Mode only . Tx Rate : Select the desired transmission rat e, or leave the default setting of Auto to allow the adap ter t o automatica lly select the optimum rate.
14 3.2 Configu r ing Encry ption Security Click WE P Enc r ypti on Ke y Se tti ng to configure t h e WEP settings. Click Cha nge to configure the WEP Key Se tting and then click Ap ply to save the settings. Note: The W E P Key settin gs m us t be ide nt ica l to the WEP settings of the w ireless router/access point you wish to connect to.
15 Key V alue : Enter the applicab le key values. Up to four key values may be entere d . Note the following rule s when entering Key values: ‧ 64-bit key length requires 10 Hexadecima l char acters (0-9, A-F) or 5 AS CII characters (any number or letter).
16 1. S elect TKIP for Enc r yption , WP A PSK for Au thentication Mode, a n d click Apply . 2. Click on WP A Encry ption Setting and click Change . 3. Enter the appropriate p assphrase in the Passphrase field under the Pre-shared Key section and c lick Apply .
17 3.3 Co nfiguring Pr ofile After you have configured all the settings, you can save your setting s as a profile so you don’t have to re-configure them the next time. T ype in a name for the p rofile in the Profile name field and click Save Curr ent .
18 3.4 Advanced Settings Click on Advanced Setting from th e More Setting window to configure the adapter ’s advanced settin g s. User Inter face : select the language for the adapt e r’s user interface. Power Consumption Setting : • Continuous Access Mode : provides the best signal throughput but least power save.
19 3.5 Informati o n Click on Information from the More Se tting window to view the driver and utility’s information..
20 4. Configuring USB Ad apter as an Access Point 4.1 Configuring Access Point You can configure the USB Adapter as an access point for other wireless client s on your ne twork. Note: You will not be able to access the Internet if you configure the USB ad apter as an access point.
21 Click on Change to configure the settings. Chann el : select the channel you want to use. Basic Ra te : se lect the applic able transfer rate. Tx Rate : select from Auto to 54 M bps. SSID : enter the desired SSID for the access point. Hide SSID (check box) : check to disabl e the broadcast of SSID.
22 4.2 Configu r ing Encry ption Security Select Enable from the WEP drop-down menu and click Setting . Key Length : Select the appropriate encryption key length. Defaul t Key ID : Select which of the f o ur Key V alue you want to use. Key Format : Select ei ther Hexadecima l (0-9, A- F) or ASCII (any number or letter).
23 4.3 Configuring MAC Ad dress Filter Filter Type : Disable : disables MAC address filter. Accept : only accepts connection from the MAC address listed. (Conn ectio n attempts from MAC address not in the list wil l be rejected). Reject : only rejects connection from the MAC address listed.
24 5. Appendix 5.1 Specifi cations 5.2 T roubleshooting A. If the utility cannot be opened or it report s that the ada pter is not fou nd, uni nst all the driver and utility and try installing again. Y ou can also verify if the driver is inst alle d properly in the Device Ma nager .
25 Expand Net w ork ada p ter s an d you shou ld see IEEE 802.1 1g USB Wireless LAN . If there is no yellow questio n ma rk or exclamation mark, the driver is inst alled properly . B . If you do not see your wireless router/access point in the Av ailable Network list, reset your wireless router/access point and click on Refresh .
26 Step 1 Go to Start , Run , typ e cmd and click OK . Step 2 At the command prompt, type ipconfig/release and pres s Enter . St ep 3 After the IP address is released, type ipconfig/re ne w an d pres s Enter . Y ou should get an IP address like 192.168.
27 T echnical Support E-mail: support@airlink1 0 1.com Toll Free: 1-8 88-746-3238 W e b Site: www .airlink101.com *Theoretical maximu m wireless signal rate based on IEEE standard 802.
Ein wichtiger Punkt beim Kauf des Geräts Airlink101 AWLL3055 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Airlink101 AWLL3055 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Airlink101 AWLL3055 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Airlink101 AWLL3055 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Airlink101 AWLL3055 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Airlink101 AWLL3055 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Airlink101 AWLL3055 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Airlink101 AWLL3055. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Airlink101 AWLL3055 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
