Benutzeranleitung / Produktwartung DHT-M330DV des Produzenten Denon
Zur Seite of 60
HOME THEA TER SYSTEM DHT -M330DV OPERA TING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI ISTRUZIONI PER L ’USO INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING • DVD-M330(DVD PLA YER): Please refer to the operating Instructions of the DVD-M330.
2 ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE.
3 ENGLISH •A void high temperatures. Allow for sufficient heat dispersion when installed on a rack. •V ermeiden Sie hohe T emperaturen. Beachten Sie, daß eine ausreichend Luftzirkulation gewährleistet wird, wenn das Gerät auf ein Regal gestellt wird.
4 ENGLISH 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON DHT -M330DV HOME THEA TER SYSTEM. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favourite music sources.
5 ENGLISH 1 2 BEFORE USING CAUTIONS ON INST ALLA TION Pay attention to the following before using this unit: • Moving the set To prevent short circuits or damaged wires in the connection cords, always unplug the power cord and disconnect the connection cords between all other audio components when moving the set.
6 ENGLISH 4 FEA TURES 1. Dolby Digital Using advanced digital processing algorithms, Dolby Digital provides up to 5.1 channels of wide-range, high fidelity surround sound. Dolby Digital is the default digital audio delivery system for DVD. 2. DTS (Digital Theater Systems)and DTS NEO:6 DTS provides up to 5.
Gray Blue Red White 7 ENGLISH (1) Speaker system connections 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely .
q Press the terminal’ s lever down. w I nsert the cord’ s core wires into the hole. e Release the lever . FL FR C SW SL SR (3m) (3m) (3m) (10m) (3m) (10m) + – + – + – + – + – + – Blue Gray White Red 8 ENGLISH Be sure to turn the amplifier’ s power off when connecting the speaker systems.
9 ENGLISH • The A V surround amplifier (A VC-M330) is equipped with a built-in protection circuit. The purpose of this circuit is to cut off the output to the speakers in order to protect them under.
10 ENGLISH (2) Connecting the DVD Player and TV • Connect the DVD player’ s video signals directly to the TV and switch the picture on the TV . • When making connections, also refer to the operating instructions of the other components.
11 ENGLISH AUDIO OUT L R L R OUT IN L R AUDIO OUT OPTICAL B L R R L L R L R L R L R R L (3) Connecting the Audio Signals of a Digital Satellite T uner and VCR • Connect the video signals directly to the TV and switch the picture on the TV . • When making connections, also refer to the operating instructions of the other components.
12 ENGLISH 1 4 2 3 (4) Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND AM loop antenna assembly Connect to the AM antenna terminals.
13 ENGLISH ACTIVE SUBWOOFER (5) Using the active subwoofer • Use Subwoofer jack to connect in case you had additional active subwoofer . •Y ou can connect a larger active subwoofer to the system. Connect the active subwoofer to the SW (Subwoofer) PRE-OUT jack using a shielded audio cable.
14 ENGLISH (7) Connecting the audio components (DVD-M330) • The A VR-M330 can be used connected in a system with the DVD-M330 DVD player . • For instructions on operating the DVD-M330 DVD player , refer to their respective operating instructions.
15 ENGLISH 6 PA RT NAMES AND FUNCTIONS AV SURROUND RECEIVER (A VR-M330) Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). w q e r t y u i o !0 !0 !1 !1 q Power operation switch (ON/ST ANDBY).....
16 ENGLISH q T ransmission indicator w Sleep timer button ...................................................................(53) e NTSC/P AL button r Clear button t A-B repeat button y Program/direct u Repeat button i Input source/surround mode selector button * System buttons.
17 ENGLISH Names and functions of remote control unit buttons on the DHT -M330DV • Buttons in sections q ~ e can be operated regardless of the position of mode switches 1 and 2. • Consider as standard positions, and switch as necessary to operate.
18 ENGLISH 3 Operate the DHT -M330DV . [1] Surround amplifier system buttons (Operated with mode switch 2 set to “AMP .”) • These operations are possible with mode switch 1 at any position.
19 ENGLISH 7 REMOTE CONTROL UNIT • The included remote control unit (RC-996) can be used to operate not only this unit but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non- DENON remote control compatible products.
20 ENGLISH • The included remote control unit (RC-996) can be used to operate not only the DHT -M330DV but also and to operate other remote control compatible DENON products.
21 ENGLISH (4) TV and video deck preset memories • Components of other brands can be operated with the included remote control unit by storing their codes in the preset memory . Note that depending on the model some operations may not be possible and some buttons may not operate properly .
22 ENGLISH Combinations of preset codes for different brands Fujitsu 004, 062 Funai 004, 062 Futuretech 004 GE 020, 036, 037, 040, 044, 058, 066, 088, 119, 120, 125, 147 Goldstar 015, 029, 031, 039, 0.
23 ENGLISH Sharp 011, 012, 013, 026, 093, 099, 100, 104, 121 Siemens 013 Signature 045, 144 Simpson 050 Sony 043, 046, 138, 146, 150 Soundesign 030, 050, 062 Spectricon 007, 033 Squareview 004 Supre-M.
24 ENGLISH VCR Admiral 081 Aiko 095 Aiwa 009 Akai 026, 027, 070, 072, 082, 083, 084 Alba 055 Amstrad 009 ASA 042 Asha 087 Audio Dynamic 005, 085 Audiovox 088 Beaumark 087 Broksonic 086, 093 Calix 088 .
25 ENGLISH VCR Randex 088 RCA 007, 013, 019, 023, 058, 063, 064, 065, 073, 080, 082, 087 Realistic 009, 021, 031, 033, 049, 053, 081, 087, 088, 091, 094, 097, 098 Ricoh 055 Salora 033, 041 Samsung 007.
26 ENGLISH (5) Operating the TV/video deck after storing its remote control signals in the preset memory 3 - q 3 - w 12 3 - w 3 - q 1 2 3 Set mode switch 1 to the “DVD” position. Set mode switch 2 to the “TV/VCR” position. Operate the video component.
<T APE> <MD> Use as analog input/output connector MD function. Use analog input/output connectors (T APE) and digital input connector (TV/AUX1) as the TV/AUX1 function.
28 ENGLISH (2) Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor: Subwoofer (DSW-M.
29 ENGLISH 4 Play the DVD. The display changes as shown below, depending on the type of disc. Example: When playing a pre-recorded ( ) disc. G DI IT D L A D V D TS D D V Example: When playing a pre-recorded ( ) disc A UTO ST D D V Example: When playing a pre-recorded ( ) disc 5 Adjust the volume.
30 ENGLISH 15 3 5 2 3 1 (2) Input mode setting 1 Press the FUNCTION button to select the input function to be played. • The function switches as shown below . • The function only changes in the “ Æ ” direction when operated from the remote control unit.
31 ENGLISH 4 Start playback on the selected component. • For operating instructions, refer to the component’ s manual. • The volume can be adjusted within the range 0 to 60. Note that depending on the input signal, surround mode, speaker settings and channel level setting, it may not be possible to adjust the volume up to 60.
32 ENGLISH 1 1 1 (3) After starting playback [1] Adjusting the sound quality (SDB/P .EQ) The SDB/P .EQ function will not work in the direct mode. [3] T urning the sound off temporarily (MUTING) 1 Press the SDB/P .EQ button. • The tone switches as follows each time the SDB/P .
33 ENGLISH (1) Before playing with the surround function • Adjustments using the test tones can only be performed in the “Auto” mode and are only valid for the AUTO DECODE Surround modes. The adjusted levels are automatically stored in the memory .
34 ENGLISH (2) Playing in the AUTO DECODE mode 3 3 5 2 1 6 6 • In the auto decode mode it is possible to play in the Dolby Digital or DTS Surround mode, depending on the format of the input signal.
35 ENGLISH [2] 2-channel mode settings • In the AUTO DECODE mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting).
36 ENGLISH Surround parameters (1) (2-channel mode) AUTO-ST (auto stereo) mode 2-channel sources are played in 2-channel stereo. When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode, while 2-channel sources (CDs, etc.
37 ENGLISH 4 Select and set the surround parameters. (On the remote control unit, use the , cursor buttons to set the parameters.) If nothing is done for 4 seconds from when the parameter is displayed, the normal display reappears. Main unit B Setting the DOLBY VS mode 2SP Ref.
38 ENGLISH (5) Playback using the Dolby Headphone mode • The A VR-M330 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake T echnolo gy for achieving 3D sound over regular headphones. • The Dolby Headphone mode is set when headphones are connected to the A VR-M330’ s headphones jack.
39 ENGLISH (6) Setting the speaker distance • Input the distances from the listening position to the speakers and set the surround delay time. • The default settings below are set upon shipment from the factory . Preparations: Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right).
SUB-WOOFER 40 ENGLISH 2 T able of Surround Mode Parameters (1) Presence/absence of signals and controllability in the various modes SPEAKER FRONT L/R CENTER Surround Mode DVS: Dolby Virtual Speaker DH: Dolby Headphone DOLBY DIGIT AL DTS SURROUND DOLBY PL II AUTO STEREO DTS NEO:6 DOLBY PL II x DOLBY DIGIT AL EX/+PL II x DTS SURR.
41 ENGLISH 2 T able of Surround Mode Parameters (3) Surround parameter 2ch Mode SDB/P .EQ (Default: DEFEA T all OFF) Analog 2-channel Surround Mode DVS: Dolby Virtual Speaker DH: Dolby Headphone DOLBY DIGIT AL DTS SURROUND DOLBY PL II AUTO STEREO DTS NEO:6 DOLBY PL II x DOLBY DIGIT AL EX/+PL II x DTS SURR.
42 ENGLISH 11 LISTENING TO THE RADIO 1 Select the FUNCTION “TUNER”. 2 Select “FM” or “AM”. • The selected “FM AUTO”, “FM MONO” or “AM” is displayed. • When using the remote control, the mode button is used to select FM AUTO and MONO.
43 ENGLISH (2) Presetting stations (remote control unit only) 2 A total of 40 stations (including both FM and AM stations) can be preset. 2 Preset stations using the including remote control unit. 1 T une in the station you want to preset. PF -- M 5 2 9.
44 ENGLISH (4) Listening to preset stations (remote control unit only) Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.
45 ENGLISH (6) RDS search Use this function to automatically tune to FM stations that provide RDS service. 1 Set the band to “FM”. 2 Press the RDS button until “RDS” appears on the display . Remote control unit Remote control unit 3 Press the TUNING + (UP) or – (DOWN) button to automatically begin the RDS search operation.
46 ENGLISH • If no TP station is found when all the frequencies are searched, “NO PROGRAMME” is displayed. (8) TP search Use this function to find RDS stations broadcasting traffic program (TP stations). 1 Set the band to “FM”. 2 Press the RDS button until “TP” appears on the display .
47 ENGLISH 12 EXP ANDING TO A 6.1- OR 7.1-CHANNEL SYSTEM • The DHT -M330DV is equipped with a decoder function allowing 6.1- or 7.1-channel playback (Dolby Digital EX, DTS-ES, Dolby Pro-Logic IIx, etc.), as well as PRE OUT connectors for surround back channels (SBL and SBR).
48 ENGLISH (3) 6.1- or 7.1-channel surround playback z Changing the Quick Setup settings At “SPEAKER SETUP” under “Quick Setup procedure” (page 27), select the configuration to be used, “6.
49 ENGLISH Surround The A VR-M330 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to ac hieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.
50 ENGLISH DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems . DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center , surround left and surround right) as well as the stereo 2-channel mode.
51 ENGLISH DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conven.
52 ENGLISH Dolby Virtual Speaker Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field usi ng only two speakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used.
53 ENGLISH • The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer) • Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
54 ENGLISH 2 Making system connections between the A VR-M330 and the DVD player (DVD-M330) makes operation even easier . (For instructions on connections, refer to “Connecting the audio components” on pages 14.) 2 System functions will not work properly if the input/output function settings are not right for the connected components.
55 ENGLI 16 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediatel y before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on.
56 ENGLISH Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly , check the table below .
57 ENGLI 19 SPECIFICA TIONS 2 Audio Section • Power Amplifier Section Rated output: Front: 17 W + 17 W (6 Ω /ohm load, 1 kHz, T .H.D. 10 %) Center: 20 W (6 Ω /ohm load, 1 kHz, T .H.D. 10 %) Surround: 17 W + 17 W (6 Ω /ohm load, 1 kHz, T .H.D. 10 %) Subwoofer: 20 W (6 Ω /ohm load, 1 kHz, T .
382 MEMO.
.
Printed in China 00D 511 4267 006 TOKYO, JAP AN www .denon.com.
Ein wichtiger Punkt beim Kauf des Geräts Denon DHT-M330DV (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Denon DHT-M330DV noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Denon DHT-M330DV - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Denon DHT-M330DV reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Denon DHT-M330DV erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Denon DHT-M330DV besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Denon DHT-M330DV verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Denon DHT-M330DV. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Denon DHT-M330DV gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
