Benutzeranleitung / Produktwartung AVR-687 des Produzenten Denon
Zur Seite of 64
AV SURROUND RECEIVER A VR-687 OPERA TING INSTRUCTIONS.
I ¢ SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
II FCC INFORMA TION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
ENGLISH 1 ENGLISH Contents Thank you for choosing the DENON A VR-687 A V Surround Receiver . This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.
ENGLISH 2 ENGLISH Speaker Setup Setting the Speaker Configuration ·········································45, 46 Setting the Subwoofer Mode Setup ······.
Getting Started Getting Started ENGLISH 3 ENGLISH About the remote control unit In addition to controlling the A VR-687, the attached remote control unit (RC-1048) can also be used to control the following products: q DENON component products w Component products other than DENON: • Set using the preset memory function ( page 48).
Getting Started Getting Started 4 ENGLISH ENGLISH Display q Signal channel indicator Lights when the preset channel is displayed at w . w Information display e Input signal indicators r Master volume indicator This displays the volume level. The Setup item number is displayed in System Setup.
Getting Started Getting Started 5 ENGLISH ENGLISH Remote control unit Remote control signal transmitter ························(3) Power buttons ··········(10, 49) M.
Getting Started Getting Started 6 ENGLISH ENGLISH MAIN buttons ·················(36) Input source selector/ Number buttons ·······(19, 49) SURROUND P ARAMETER/ AUDIO button ·.
Easy Setup Procedure 7 ENGLISH ENGLISH Speaker layout [Basic layout] Example of basic layout with eight speakers and a monitor . Subwoofer Center speaker Surround speaker Surround back speaker Front speaker Set these at the sides of the monitor or screen with their front surfaces as flush with the front of the screen as possible.
>< <> >< <> >< >< >< >< >< IN ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) ( L ) ( R ) Easy Setup Procedure Easy Setup Procedure 8 ENGLISH ENGLISH ¢ Connections •W ith the A VR-687, up to ten speakers can be connected for surround playback.
Easy Setup Procedure Easy Setup Procedure 9 ENGLISH ENGLISH • For best picture quality (especially with progressive DVD and other high definition sources), choose the component video connection to your monitor . S-Video and composite video outputs are also provided if your monitor does not have component video inputs.
Easy Setup Procedure Easy Setup Procedure ENGLISH 10 ENGLISH Auto Setup The A VR-687’ s auto setup use the attached microphone to measure the acoustic properties in the room and automatically make the optimum settings. •T o make the sound field settings manually ( page 45 ~ 47).
Easy Setup Procedure Easy Setup Procedure ENGLISH 11 ENGLISH r Starting Auto Setup Press F F to start the Auto Setup. •S tart the measurements. Measurement of each channel is performed as follows: 1 Disconnect the setup mic to finish Auto Setup. 3 Cautions during measurements: • Loud test tones are output during the measurements.
Measures Cause Example Easy Setup Procedure Easy Setup Procedure ENGLISH 12 ENGLISH q The speakers required for producing suitable reproduction have not been detected. • Check that the pertinent speakers are properly connected. w The speaker polarity is connected in reverse.
ENGLISH 13 ENGLISH Cable indications Signal direction The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied). V ideo cable Audio cable NOTE: • Do not plug in the power supply cord until all connections have been completed.
Connecting Other Sources Connecting Other Sources 14 ENGLISH ENGLISH Connecting a TV/DBS tuner • For best picture quality choose the component video connection to your TV or DBS tuner .
Connecting Other Sources Connecting Other Sources 15 ENGLISH ENGLISH Connecting a VCR • For best picture quality choose the component video connection to your VCR.
Connecting Other Sources Connecting Other Sources 16 ENGLISH ENGLISH Connecting the XM terminal •A VR-687 is the XM Ready ® receiver . Y ou can receive XM ® Satellite Radio by connecting to the XM Passport System (sold separately) and subscribing to the XM service.
Connecting Other Sources Connecting Other Sources 17 ENGLISH ENGLISH For instructions on operations using the MUL TI ZONE functions ( page 36). Connecting the MUL TI ZONE terminals Connecting the iPod.
Connecting Other Sources Connecting Other Sources 18 ENGLISH ENGLISH Connecting the power supply cord AC 120 V , 60 Hz AC outlet (wall) NOTE: • Insert the plugs securely . Incomplete connections will result in the generation of noise. • Only use the AC OUTLETS for audio equipment.
ENGLISH 19 ENGLISH Basic Operation Playing the input source Use INPUT SELECTOR to select the input source you want to play . Start playback on the selected component. For operating instructions, refer to the component’ s manual. 1 3 Press INPUT MODE .
Basic Operation Basic Operation ENGLISH 20 ENGLISH T urning the sound off temporarily (MUTING) Press [MUTING] . Y ou can adjust the muting level ( page 44). • Canceling MUTING mode: To cancel the muting mode, either press [MUTING] or adjust the volume.
ENGLISH 21 ENGLISH Sources recorded in stereo Sources recorded in monaural DIRECT / STEREO •E ffective for achieving pure playback. • If there is no need for tone control or distribution of the low frequencies in function of the speaker configuration, select the DIRECT mode to achieve the best sound quality .
Basic Operation Basic Operation ENGLISH 22 ENGLISH Selecting the Dolby Digital and DTS Surround mode (only with digital input) Play a program sour ce with the , mark. •“ ” or “ ” lights, depending on the source. Press SURROUND P ARAMETER . Press D D H H to select the item, then pr ess F F G G to set.
Basic Operation Basic Operation ENGLISH 23 ENGLISH Selecting the Dolby Pro Logic II x (Pro Logic II ) mode Press [ST ANDARD] to select “DOLBY PL II x”.
Basic Operation Basic Operation ENGLISH 24 ENGLISH Selecting the DTS NEO:6 mode It is possible to play analog input signals and digital input signals (2- channels) in the surround mode. Press SURROUND P ARAMETER . Play a program sour ce. Press F F G G to select the play mode.
Basic Operation Basic Operation ENGLISH 25 ENGLISH Surround Mode Surround modes and parameters E E E E C C (CINEMA) C C (CINEMA) C C (CINEMA) E E E E E E E E E E E E E E E E E E E E E E E E C C (NOTE .
NEURAL SURROUND Basic Operation Basic Operation ENGLISH 26 ENGLISH E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E.
Basic Operation Basic Operation ENGLISH 27 ENGLISH Surround Mode Button Note DTS ES DSCRT (With Flag) Input signals DTS DOLBY DIGIT AL ANALOG LINEAR PCM DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGIT AL EX (With Flag) DOLBY DIGIT AL EX (With no Flag) DOLBY DIGIT AL (5.
5CH/7CH STEREO (NOTE 1) Basic Operation Basic Operation ENGLISH 28 ENGLISH VIRTUAL MA TRIX VIDEO GAME MONO MOVIE (NOTE 2) JAZZ CLUB ROCK ARENA Using the DENON original surround modes The A VR-687 is equipped with a high performance digital signal processor (DSP) that uses digital signal processing to recreate sound fields artificially .
Basic Operation Basic Operation ENGLISH 29 ENGLISH • Select “DEF AUL T Y/N” and press F F to reset all the settings. Press D D H H to select the item, then press F F G G to set. The surround parameter switches in the following order each time SURROUND PARAMETER is pressed for the different surround modes.
Basic Operation Basic Operation ENGLISH 30 ENGLISH Press ENTER or SURROUND P ARAMETER . Press G G to select “OFF”. Press D D H H to select “Bass” or “T reble”, then pr ess F F G G to set the level. Can be adjusted within the range of –10 dB to +10 dB.
Basic Operation Basic Operation ENGLISH 31 ENGLISH Use < INPUT SELECTOR > to select “TUNER” or pr ess [TUNER] . Auto tuning Manual tuning Press [MODE] to set the auto tuning mode. • The “AUTO” indicator lights. Press TUNING . • Automatic searching begins.
Basic Operation Basic Operation ENGLISH 32 ENGLISH XM Satellite Radio ¢ Introducing XM Satellite Radio There’ s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio. Select from over 170 channels of music, news, sports, comedy , talk, and entertainment.
ENGLISH 33 ENGLISH Advanced Operation The night mode can be set when playing Dolby Digital sources. The dialogues are easier to hear at night and when listening with the volume low . Press [NIGHT] . Night mode • Canceling night mode: Press [NIGHT] again.
Advanced Operation Advanced Operation ENGLISH 34 ENGLISH If the screens above are not displayed, the iPod may not be properly connected. Check the connections and settings. NOTE: • DENON will accept no responsibility whatsoever for loss or damage of data on an iPod occurring when the iPod is used connected to the A VR-687.
Advanced Operation Advanced Operation ENGLISH ENGLISH 35 V iewing still pictures and videos (only for iPods equipped with the slideshow / video function) Press [MODE] for at least 2 seconds to switch from the Browse mode to the Remote mode. • “Remote iPod” is displayed on the A VR-687’ s display .
Advanced Operation Advanced Operation ENGLISH 36 ENGLISH When the ZONE2 SOURCE function is set to “ TUNER”, the preset channel can be selected pr essing [CHANNEL] . Press [INPUT SELECTOR] . The ZONE2 source switches directly . The output level of the ZONE2 SPEAKER OUT terminals can be controlled pr essing [VOLUME] .
ENGLISH 37 ENGLISH ¢ Last function memory The various settings set when the A VR-687’ s power is switched to standby are stored in the memory . When the power is turned back on, the settings made when the power was switched to standby are recalled.
This assigns the different input sources for the digital input terminals. ENGLISH 38 ENGLISH Page Default settings Items Advanced Setup – Part 1 1. Speaker Setup System setup items and default values 1 ~ 6 8 ~ 15 Speaker Configuration mode T est T one mode Front Sp.
ENGLISH 39 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 1 3. Option Setup O p t i o n S e t u p Page Default settings Items 5 ~ 11 2ch Direct/Stereo mode Auto Surround mode 12 OFF Auto Surround Mode = ON 44 45 1 Power Amp Assignment mode 43 S.
Current setting ENGLISH 40 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 1 Navigating through the System Setup items Press SYSTEM SETUP , then press ENTER . Press F F G G to select the item you want to set, then press ENTER . Press ENTER or H H to confirm the new settings.
Press F F G G to set. ENGLISH 41 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 1 Input Setup Setting the Digital In Assignment Press F F G G to select “2. In”, then press ENTER . Press ENTER or H H to enter the setting and switch to the iPod Assignment setting.
Advanced Setup – Part 1 Advanced Setup – Part 1 ENGLISH 42 ENGLISH • Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal ( page 13).
ENGLISH 43 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 1 Setting the Power Amplifier Assignment To suit your preference, a surround back channel’ s power amplifier can be assigned to the front channel (“Front A” or “Front B”) for bi- amp playback, ZONE2.
ENGLISH 44 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 1 Setting the 2ch Direct/Stereo Custom Make the 2-channel direct mode and stereo mode speaker settings. Press F F to select “ON”, then press H H . 1 Large: Select this when using large speakers with ample low frequency reproduction capabilities.
ENGLISH 45 ENGLISH Advanced Setup – Part 1 Advanced Setup – Part 2 • If the “Auto Setup” procedure has already been performed, there is no need to make this setting. • Perform this setting if you wish to make the settings for your speaker systems manually .
ENGLISH 46 ENGLISH Advanced Setup – Part 2 Setting the Subwoofer Mode Setup Select the method of playback of the subwoofer for playing the low bass signals. LFE (Normal): For any channel(s) that are set to “Large”, low frequencies in that channel’ s corresponding source are directed to that loudspeaker only .
1 7 T . T O N E Y e s < 1 ENGLISH 47 ENGLISH Advanced Setup – Part 2 Advanced Setup – Part 2 Set the volume of the various speakers so that the sound output from the speakers and the subwoofer seems to have the same volume level. Press F F G G to set, then press H H .
ENGLISH 48 ENGLISH Operating the remote control unit Operating DENON audio components Set [MODE SELECTOR 1] to “AUDIO”. 1 Operate the audio component.
Operating the remote control unit Operating the remote control unit ENGLISH 49 ENGLISH Operating a component stored in the preset memory Operate the component. For details, refer to the component’ s operating instructions. Some models cannot be operated with this remote control unit.
ENGLISH 50 ENGLISH Operating the remote control unit Operating the remote control unit RETURN DISPLA Y ENTER AUDIO D D H H F F G G SETUP 9 , VCR CH + 8 , VCR CH – 7 6 0 , DISC SKIP + 3 , A/B 2 1 CHA.
Operating the remote control unit Operating the remote control unit ENGLISH 51 ENGLISH Default setting (Preset code) RETURN DISPLA Y MEMORY / SUBTITLE ENTER BAND / PICTURE ADJUST AUDIO D D H H F F G G.
ENGLISH 52 ENGLISH Operating the remote control unit Operating the remote control unit Setting the punch through function Set [MODE SELECTOR 1] to “VIDEO”. 1 Press [MEMORY] and [INPUT MODE] at the same time. • The indicator starts flashing. 3 Set [MODE SELECTOR 2] to the component to be r egister ed (DBS/CABLE or TV).
ENGLISH 53 ENGLISH Examples of speaker layouts Below we introduce examples of speaker layouts. Refer to these to arrange your speakers according to their type and how you want to use them. [1] Using surround back speaker(s) q When mainly playing movies Recommended when your surround speakers are single or 2-way speakers.
ENGLISH 54 ENGLISH Additional Information Additional Information ¢ Sources recorded in Dolby Surround Sources recorded in Dolby Surround are indicated with the following logo marks. Dolby Surround support mark: Manufactured under license from Dolby Laboratories.
18 Page Measures Cause Symptom Page Measures Cause Symptom T roubleshooting ENGLISH ENGLISH Tr oubleshooting If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the Operating Instructions? 3.
56 ENGLISH ENGLISH Symptom Cause Measures Page T roubleshooting T roubleshooting Specifications ¢ Audio section • Power amplifier Rated output: Front (A, B): 75 W + 75 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08 % T .H.D.) 110 W + 110 W (6 Ω /ohms, 1 kHz with 0.
1 PRESET CODE Go Video 047, 048 Goldstar 000, 006, 012, 062, 088 Gradiente 094 Grundig 042 Harley Davidson 094 Harman Kardon 040, 062 Hi-Q 091 Hitachi 009, 013, 023, 026, 058, *[108] , 109, 110, 111 J.
2 PRESET CODE Radix 088 Randex 088 RCA 007, 013, 019, 023, 058, 063, 064, 065, 073, 080, 082, 087 Realistic 009, 021, 031, 033, 049, 053, 081, 087, 088, 091, 094, 097, 098 Ricoh 055 Salora 033, 041 Sa.
3 PRESET CODE Magnavox 005, 010, 017, 030, 033, 038, 050, 056, 071, 078, 079, 085, 089, 108, 109, 110, 127, 131, 132, 145 Marantz 015, 017, 071, 080 Matsui 027 Memorex 014, 027, 045, 083, 118, 144 Met.
4 PRESET CODE Echostar Dish 062, 066 GE 048, 055, 056 General Instruments 039, 040, 041 Grundig 070, 071, 072, 073 Hitachi 058, 059 Hughes Network 063, 064, 065, 069 JVC 057 Kathrein 074, 075, 076, 08.
Denon Brand Company , D&M Holdings Inc. Printed in China 00D 511 4502 004 TOKYO, JAP AN www .denon.com.
Ein wichtiger Punkt beim Kauf des Geräts Denon AVR-687 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Denon AVR-687 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Denon AVR-687 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Denon AVR-687 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Denon AVR-687 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Denon AVR-687 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Denon AVR-687 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Denon AVR-687. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Denon AVR-687 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
