Benutzeranleitung / Produktwartung SKYFI3 des Produzenten Delphi
Zur Seite of 40
Impor tant: This manual contains impor tant safety and operating information. Please r ead, understand, and follow the instructions in this manual. Failur e to do so could result in personal injur y, death, and/or damage to your Delphi Premium Sound System, accessories, and/or to your vehicle or proper ty.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Warning: T o prevent fire or shock hazard, do not expose the Delphi Premium Sound System to rain, moisture or water .
Owner’ s Record The model number is located below and the serial number is located on the label on the rear of the Delphi Premium Sound System. Record the serial number in the space provided below . Refer to these numbers whenever you call your dealer regarding this product.
Delphi Premium Sound System Controls: VOL - BASS VOL + volume down bass boost volume up.
Need help? Call us at 1.877.GO.DELPHI Monday through Friday from 8:00 a.m. - 8:00 p.m. Eastern T ime Saturday and Sunday from 10:00 a.m. - 4 :00 p.m Eastern T ime Note: Extended seasonal hours may be available. Thank you for purchasing the Delphi Premium Sound System.
2 T able of Contents Contents Welcome ............................................................... 3 About Delphi ........................................................ 3 Getting Started .................................................... 4 What’ s in the Box .
3 Welcome Than k y ou f or p urc hasi ng t he n ew Delp hi P rem ium Soun d S yste m. Y ou a re j ust minu tes awa y fr om bein g ab le to p lay crys tal cle ar l ive XM ® sate lli te r adio on a p reci sely en gine ered sp eake r sy ste m. P leas e re ad the foll owi ng p ages to get sta rted wi th y our new Del phi Pre mium Sou nd S yst em.
Getting Started 4 1 2 3 What’ s In the Box Y our Delphi Premium Sound System Kit contains the following components: Items in the box 1. Premium Sound System 2. Radio cradle inserts for Roady ® XT , MyFi ® , SKYFi3 ® and Audiovox® receivers 3. Repeater Antenna Bracket and mounting screws 4.
5 Getting Started Setting Up the System Y ou can set up your Delphi Premium Sound System by following these steps: 1. Connect the supplied 18-volt DC power adaptor to the jack on the rear of the Delphi Premium Sound System. Plug the other end into the wall outlet.
Getting Started 6 to attach the antenna to the four tabs on the back of the Delphi Premium Sound System. Or you can extend the entire 20’ cable away from the system to improve reception.T o reattach the top cover , line up all tabs and then slide the cover toward the front of the unit until a click is heard.
7 Getting Started Power Up the System Use the power button on the receiver or on its remote control to turn on the receiver . If the display reads “ANTENNA” after powering up, check that the antenna connection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not authorized yet).
Getting Started 8 Using SKYFi3 ® with Delphi Premium Sound System 1. Install the SKYFi3 cradle insert onto the Delphi Premium Sound System. Insert the SKYFi3 receiver (sold separately) into the cradle insert included with the Delphi Premium Sound System until snug.
9 Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instruc- tions in “Setting up the Antenna” on page 18. NOTE: Getting started instructions on all receivers are the same with the exception of having to turn on the MyFi on the receiver and adjusting the separate volume control on that receiver as well.
Getting Started 10 Using MyFi ® with Delphi Premium Sound System Special note for MyFi receivers: If you have purchased the MyFi unit, you must turn on the MyFi switch located in the battery compartment of the Premium Sound System. Sliding this switch to “2” position will make the Premium Sound System compatible with MyFi radios.
11 Getting Started Switch to “2” position to use your MyFi with the Delphi Premium Sound System..
Getting Started 12 Using Roady ® XT with Delphi Premium Sound System 1. Install the Roady XT cradle onto the Delphi Premium Sound System. Insert the Roady XT Receiver (sold separately) into the adaptor included with the Delphi Premium Sound System until snug.
13 Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instructions in “Setting up the Antenna” on page 18..
Getting Started 14 Using an Audiovox ® Receiver with Delphi Premium Sound System 1. Install the Audiovox cradle onto the Delphi Premium Sound System. In- sert the Audiovox receiver (sold separately) into the cradle insert included with the system until snug.
15 Getting Started 4. If the display reads “NO SIGNAL” after powering up, follow the instruc- tions in “Setting up the Antenna” on page 18..
Getting Started 16 Using the Delphi Premium Sound System with Batteries The Delphi Premium Sound System can be used with batteries (not included) to allow you to listen to XM outdoors or in other locations without access to an AC power source. Alkaline or rechargeable NiCD batteries are recommended.
17 Getting Started Back Cover Battery Switch T o keep the batteries from draining when not in use, switch the button to OFF position. The function of the Battery switch in the rear is to provide protection against battery drainage when Premium Sound System is not plugged into the wall.
Setting Up the Antenna 18 The antenna that comes with the Delphi Premium Sound System is a high-gain antenna that can receive the XM signal from XM’ s satellites and/or XM’ s land-based repeaters (depending on where you live).
19 Setting Up the Antenna Caution: Do not set anything on top of the Premium Sound System as it may reduce antenna signal reception. Positioning the Antenna When outdoors with a view of the southern s.
Setting Up the Antenna 20 Indoor Installation on a Flat Surface T o aim your antenna at the satellite: 1. Set antenna flat against its base on a flat (horizontal) surface. 2. T urn the base of the antenna so that the XM logo is facing to the south. 3.
21 Setting Up the Antenna 2. Attach four screws to the wall using the screw-locator pattern shown below . Photocopy the pattern to use as a template. Use screws with head sizes small enough to fit in the center of each of the four holes but large enough not to pop out of the elongated sections.
Setting Up the Antenna 22 3. T ilt the antenna fully back on the base. Place the antenna base on the four screw heads with the antenna pivot at the top and pull down approxi- mately 1/4” until the base is firmly secured. Note that the XM logo will be upside down when the antenna is properly installed.
23 Setting Up the Antenna Repeater Antenna The Delphi Premium Sound System comes with a repeater antenna bracket. This bracket can be attached to base of the unit using the two screws provided with the bracket.
Using the Delphi Premium Sound System 24 Unique Delphi Premium Sound System features include the following: V olume V olume can be adjusted using the push buttons on the Delphi Premium Sound System.
25 Using the Delphi Premium Sound System Bass Boost Delphi Premium Sound System is equipped with Maxx Bass technology . T o turn on the additional bass press the BASS Boost (see illustration at left).
Using the Delphi Premium Sound System 26 sound. Sound that seems normal can be loud and harmful to your hearing. T ake precautions by adjusting the volume control on your audio system to a safe sound level before your hearing adapts to it. T o help avoid hearing loss or damage, do the following: 1.
27 Other Things Y ou Should Know Precautions 1. On power sources: • For AC operation, it is recommended that only the supplied AC power adaptor is used.
Other Things Y ou Should Know 28 3. Do not immerse in water . • This product is not meant to be immersed in water or come in continuous contact with water . • Before opening or shutting the receiver cradle or battery compartment panel, be sure to wipe off water , dust, or sand on the outside of the unit.
29 Other Things Y ou Should Know If there is no audio: • Unplug the satellite radio receiver from the Delphi Premium Sound System and re-insert it. • Make sure that Audio level is set correctly .
Other Things Y ou Should Know 30 Specifications Frequency Response .................................................30Hz to 20kHz Headphone Connector T ype .....................................3.5mm Stereo Jack (1/8”) Auxiliary Connector T ype ....
31 Warranty 31 Warranty 31 Warranty Delphi Limited Consumer Warranty (United States) Delphi Product and Service Solutions (“Delphi”) warrants all XM Satellite Radio Products sold by Delphi (each .
32 Warranty Warranty 32 Warranty 32 installation of a Product in a manner which is inconsistent with Delphi’ s written instructions, (iii) alteration or modification of a Product, (iv) misuse, (v) .
33 Warranty 33 Warranty 33 Warranty gives you specific legal rights. Y ou may also have other rights that may vary from state to state. NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED W ARRANTY .
34 Warranty Warranty 34 Warranty 34 warranty only extends to customers who purchase the Products in Canada. Delphi will not be responsible for damage resulting from any (i) deviation of Delphi’ s op.
35 Warranty 35 Warranty 35 Warranty How provincial law relates to the warranty: Some provinces do not allow limitations on the duration of implied conditions or warranties, or the exclusion or the limitation of Economic Loss. So the above limitations or exclusions may not apply to you.
D e l p h i C o r p o ra ti on 1 4 4 1 W es t Lo ng L ak e Ro ad T ro y , Mi ch ig a n 4 8 0 9 8 - 5 0 9 0 U . S . A . C u s t o m e r S e r vi ce : 1. 87 7 . G O . D E L P H I w ww . d e lp h i. c om SK YFi 3 , Roa dy XT , The XM na me, T un eSe lec t, and r el ate d lo gos ar e t rad ema rks o f XM Sat ell ite Ra dio In c.
Ein wichtiger Punkt beim Kauf des Geräts Delphi SKYFI3 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Delphi SKYFI3 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Delphi SKYFI3 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Delphi SKYFI3 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Delphi SKYFI3 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Delphi SKYFI3 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Delphi SKYFI3 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Delphi SKYFI3. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Delphi SKYFI3 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
