Benutzeranleitung / Produktwartung T02G des Produzenten Dell
Zur Seite of 65
Dell Latitude ST Owner's Manual Regulatory Model: T02G Regulatory Type: T02G001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents Notes, Cautions, and Warnings ...................................................................................................2 1 Working on Your Computer ....................................................................................
8 Removing The Battery .............................................................................................................. 27 Installing The Battery ...........................................................................................
21 Troubleshooting....................................................................................................................... 55 Enhanced Pre-boot System Assessment (ePSA) ...................................................................
6.
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety.
Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • #0 Phillips screwdriver • #1 Phillips screwdriver • Small plastic scribe •.
2 Overview The Dell Latitude ST features a Windows 7 operating system in a 10" touch-screen slate, combining the mobility of a tablet with the manageability, security and compatibility of a laptop.
Feature Description Cursor Feedback Ability to see if the target has been hit by using visual feedback for success. Pen Overview The Latitude ST uses several input devices. The standard external USB keyboard and mouse are present, plus you can opt for the electrostatic pen or just use your finger as an input device.
1. Open Control Panel . 2. Double-click Tablet PC Settings . 3. On the Tablet PC Settings window, click Calibrate . 4. On the Calibrate pen or touch input screens, select Pen input . Removing / Inserting the Stylus Battery and Pen Tip To remove/insert the battery, un-tighten the screw cap.
Tablet PC Input Panel When an application does not directly support pen input, you can use the Tablet PC Input Panel to enter text into your application. If you tap in an editable area, the Tablet PC Input Panel icon appears. Tapping the icon makes the Input Panel slide out from the edge of the display.
Table 3. Input Panel Icons Icon Name Function Handwriting recognition The writing pad and character pad convert handwriting into typed text. You can write continuously on the writing pad, like writing on a piece of lined paper. Use the character pad to enter one character at a time.
Touch Usage One of the key advantages of the Tablet PC is the ability to easily switch from pen input to touch input. When you use Touch Mode , a translucent image of a computer mouse, called the touch pointer, floats beneath your finger. The touch pointer has left and right mouse buttons that you can tap with your finger.
Docking Station The docking station is designed for Latitude ST. The docking station can be purchased separately from dell.com . For more information, see the docking station setup guide available on support.
Figure 1. Docking Station Front View 1. Dock Connector 2. Power LED Figure 2. Docking Station Back View 1. AC Adapter Connector 2. USB 2.0 Connector (1) 3.
3 Removing The SD Memory Card 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the SD memory card to release it from the computer. 3. Slide the SD memory card out of the computer. Installing The SD Memory Card 1. Push the memory card into the compartment until it clicks into place.
18.
4 Removing The Digitizer Pen 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the digitizer pen to release it from the computer. 3. Pull the digitizer pen out of the computer. Installing The Digitizer Pen 1. Push the digitizer pen into the compartment until it clicks into place.
20.
5 Removing The Label Door 1. Follow the procedures in Before Working On Your Computer . 2. Press the release latch that secures the label door. 3. Lift up the label door diagonally and remove it from the computer. Installing The Label Door 1. Place the label door diagonally and align it with the securing clips on the edges.
22.
6 Removing The SIM Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Slide the SIM card holder to unlock the SIM card slot. 4. Flip the SIM card holder in an upward direction. 5. Pull the SIM card out of the SIM card holder and remove it from the computer.
Installing The SIM Card 1. Push the SIM card into the SIM card slot until it clicks into place. 2. Install the label door . 3. Follow the procedures in After Working Inside Your Computer .
7 Removing The Bottom Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . NOTE: Remove the stylus pen and the dummy SD card to prevent any damage to the computer. 3. Remove the screws that secure the bottom cover to the computer.
Installing The Bottom Cover 1. Attach the bottom cover to the computer. 2. Push the edges of the bottom cover into the securing clips until they are fully engaged. 3. Tighten the screws that secure the bottom cover. 4. Install the label door . 5. Follow the procedures in After Working Inside Your Computer .
8 Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screws that secure the battery to the computer. 6. Lift up the battery and remove it from the computer.
Installing The Battery 1. Place the battery in the battery compartment. 2. Tighten the screws that secure the battery. 3. Connect the battery cable. 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer .
9 Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WLAN card. 6.
Installing The Wireless Local Area Network (WLAN) Card 1. Slide the WLAN card into its slot. 2. Tighten the screws that secure the WLAN card in place. 3. Connect the antennas according to the color code on the WLAN card. 4. Install the battery . 5. Install the bottom cover .
10 Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WWAN card. 6.
Installing The Wireless Wide Area Network (WWAN) Card 1. Slide the Wireless Wide Area Network (WWAN) card into its slot. 2. Tighten the screw securing the WWAN card in place. 3. Connect the antennas according to the color code on the WWAN card. 4. Install the battery .
11 Removing The Internal Storage Device (Solid State Drive) 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screw that secures the solid state drive to the computer.
34.
12 Removing The Coin-Cell Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the Internal Storage Drive . 6. Disconnect the coin-cell battery cable.
36.
13 Removing The Speaker 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the screws that secure the speaker to the computer. 6. Disconnect the speaker cable.
Installing The Speaker 1. Connect the speaker cable to the system board. 2. Tighten the screws that secure the speaker. 3. Install the battery . 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer .
14 Removing The Middle Frame Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the screws that secure the middle frame assembly to the computer.
Installing The Middle Frame Assembly 1. Attach the middle frame assembly to the computer. 2. Push the edges of the middle frame assembly into the securing clips until they are fully engaged. 3. Connect the display cable. 4. Affix the tapes that secure the antenna to the display assembly.
15 Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the camera cable from the system board.
10. Remove the screw that secures the camera board to the computer. 11. Lift up the camera board and remove it from the computer. 12. Disconnect the camera cable from the camera board. Installing The Camera 1. Connect the camera cable to the camera board.
16 Removing The Input/Output (I/O) Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7.
Installing The Input/Output (I/O) Board 1. Place the I/O Board on the top edge of the display assembly. 2. Tighten the screw that secures the I/O board to the computer. 3. Connect the I/O board cable to the system board. 4. Install the middle frame assembly .
17 Removing The Docking Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the docking board cable from the system board.
10. Lift up the securing clips and disconnect the docking board cable from the docking board. Installing The Docking Board 1. Connect the docking board cable to the docking board and flip down the securing clips.
18 Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the SD memory card . 4. Remove the label door . 5. Remove the phone SIM . 6. Remove the bottom cover . 7. Remove the battery .
15. Lift up the system board and remove it from the computer. Installing The System Board 1. Tighten the screw that secures the system board to the middle frame assembly. 2. Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable, speaker cable, and the coin-cell battery cable.
19 Removing Low-Voltage Differential Signaling (LVDS) Cable 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly .
Installing The Low-Voltage Differential Signaling (LVDS) Cable 1. Connect the display cable to the display panel assembly. 2. Affix the tape that secures the display cable. 3. Install the middle frame assembly . 4. Install the battery . 5. Install the bottom cover .
20 System Setup System Setup Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of hard drive installed.
Help Appears on the right side of the System Setup window and contains help information about the option selected in Options List . Use the following keys to navigate through the System Setup screens: Keystroke Action < F2 > Displays information on any selected item in the System Setup.
Option Function L1 Cache Size Displays the processor L1 cache size. L2 Cache Size Displays the processor L2 cache size. Fixed HDD Displays the model number and capacity of the hard drive. System Memory Displays the memory in-built on the computer. Extended Memory Displays the memory installed on the computer.
Table 6. Security Tab Computrace Enable or disable the Computrace feature on your computer. TPM support Enable or disable TPM support. Boot The Boot tab allows you to change the boot sequence. Exit This section allows you to save, discard, and load default settings before exiting from System Setup.
21 Troubleshooting Enhanced Pre-boot System Assessment (ePSA) The ePSA is a diagnostic utility available on your computer. This utility includes a series of tests for a computer's hardware. You can run these tests even if the computer lacks any media (hard drive, CD drive, etc.
2. The computer will start up and begin running the ePSA utility automatically. 3. During the testing process, you will be prompted to answer a YES or NO question. To respond, press Volume Up = YES or Volume Down = NO. 4. Press the Security Button (Ctrl-Alt-Del) to click OK once the tests are completed.
Beep Codes The computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of beeps, called beep codes, identify various problems. The delay between each beep is 300 ms, the delay between each set of beeps is 3 seconds, and the beep sound lasts 300 ms.
Code Cause and Troubleshooting Steps 1 System board: BIOS ROM failure System board failure, covers BIOS corruption or ROM error 2 Memory No memory/RAM detected 3 Chipset Error (North and South Bridge .
2. Check the system information to see how many touch points are detected. – Click Start . – Right click Computer and select Properties from the menu.
60.
22 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer.
Video Video controller Intel HD Graphics 600 Video memory 766 MB Communications Network adapter one RJ-45 connector support via docking station Wireless • Wireless On/Off functionality • WWAN and .
Battery Length 165.50 mm (6.56 inches) Height 5.90 mm (0.23 inch) Width 114.10 mm (4.49 inches) Weight 200.00 g (0.44 lb) Voltage 7.4 VDC Temperature range Operating 0 °C to 60 °C (32° F to 140° F.
Environmental Storage 5 % to 95 % (noncondensing) Altitude (maximum): Operating –15.20 m to 3048 m (–50 ft to 10,000 ft) Non-operating –15.20 m to 10,668 m (–50 ft to 35,000 ft) Airborne contaminant level G1 as defined by ISA-71.
23 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options.
Ein wichtiger Punkt beim Kauf des Geräts Dell T02G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell T02G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell T02G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell T02G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell T02G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell T02G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell T02G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell T02G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell T02G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
