Benutzeranleitung / Produktwartung P17E des Produzenten Dell
Zur Seite of 76
Inspiron 17/17R Owner’s Manual Computer model: Inspiron 37 21/5721 Regulator y model: P17E Regulatory type: P17E001 book.book Page 1 Friday, Decemb er 14, 2012 3:32 PM.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potentia l damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents | 3 Contents Before Y ou Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 T urn Off Y our Computer and Connected Devices . . . . . 9 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 10 Recommended T ools . . .
4 | Contents Replacing the Base Cover . . . . . . . . . . . . . . . . . . . 21 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Postrequisit es . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Removing the Memory Module(s) .
Contents | 5 Removing the Wi reless Mini-Card . . . . . . . . . . . . 34 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Replacing the Wireless Mini-Card .
6 | Contents Replacing the Co oling Asse mbly . . . . . . . . . . . . . 50 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Postrequisit es . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Removing the Hard- Drive Interposer Board .
Contents | 7 Removing the Display Hinges . . . . . . . . . . . . . . . . 63 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Replacing the Display Hinges .
8 | Contents book.book Page 8 Friday, Decemb er 14, 2012 3:32 PM.
Before Y ou Begin | 9 Before Y ou Begin T urn Off Y our Computer and Connected Devices CAUTION: T o avoid losing data, save and close all open files and exit all open programs before yo u turn off your computer . 1 Save and close all open files and exit all open programs.
10 | B e f o r e Y o u B e g i n Safety Instructions Use the following safety guidel ines to protect your computer from potential damage and ensure your personal safety. WARN ING: Before working inside your computer , read the safety information that shipped with your co mputer .
After Working Inside Y our Computer | 11 After W orking Inside Y our Computer After you complete the replacement procedures, ensure the following: • Replace all screws and ensure that no stray screws remain inside your computer. • Connect any external devices, cables, ca rds, and any other part(s) you removed before working on your computer .
12 | Removing the Battery Removing the Battery WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
Replacing the Battery | 13 Replacing the Battery WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
14 | Removing the Optical Drive Removing the Optical Drive WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Optical Drive | 15 3 Remove the screw tha t secures t he opti cal-drive bracket to the optical-drive assembly and remo ve the optical-drive bracket. 4 Carefully pull the optical-drive bezel an d remove it from the optical drive. 1 optical-drive bezel 2 optical drive 3 optical-drive bracket 4 scr e w 3 2 4 1 book.
16 | Replacing the Optical Drive Replacin g the Opti cal Drive WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Keyboard | 17 Removing the Keyb oard WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
18 | Removing the Keyboard 3 T urn the keyboard over and place it on the palm-rest. 4 Lift the connector latch and disco nnect the keyboard cable from the keyboard-cable connector . 5 Lift the keyboard off the palm-rest. 1 keyboard cable 2 connector latch 3 keyboard 4 palm-rest 1 2 3 4 book.
Replacing the Keyboard | 19 Repla cing t he Keybo ard WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
20 | Removing the Base Cover Removing the Base Cover WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Replacing the Base Cover | 21 Replacing the Base Cover WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
22 | Removing the Memory Mo dule(s) Removing the Memor y Module(s) WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Replacing the Memory Module(s) | 23 Replacing the Memor y Module(s) WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
24 | Removing the Hard Drive Removing t he Hard Drive WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Hard Drive | 25 Procedure 1 Remove the screws that secure the hard-drive assembly to the computer base. 2 Using the pull tab, slide the hard-drive as sembly towards the side of the computer to disconnect the hard-drive assembly from the system board.
26 | Removing the Hard Dr ive 4 Remove the screws that secure the hard-drive bracket to the hard drive. 5 Using the pull-tab, lift the hard-d rive bracket off the hard drive.
Replacing the Hard Drive | 27 Replacin g the Hard Drive WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
28 | Removing the Coin-Cell Battery Removing the Coin-Cell Batter y WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Replacing the Coin-Cell Battery | 29 Replacing the Coin-Cell Batter y WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
30 | Removing the Palm-Rest Removing t he Palm -Rest WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Palm-Rest | 31 2 T urn the computer over and open the display as far as possible. 3 Lift the connector latches and, using t he pull-tabs, disconnect the power- button cable and touchpad cable from the system board. 1 power-button cable 2 connector latches (2) 3 pull-tab 4 touchpad cable 1 2 3 4 book.
32 | Removing the Palm-Rest 4 Remove the screws that secure the palm-rest to the computer base. 5 Using a plastic scribe, gently lift and releas e the tabs on the palm-rest from the slots on the computer base. CAUTION: Separate the palm-rest from th e display assembly carefully to avoid damage to the display assembly .
Replacing the Palm-Rest | 33 Replacin g the Pa lm-Rest WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
34 | Removing the Wireless Mini-Card Removing the Wi reless Mini-Card WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Wireless Mini-Card | 35 3 Slide and remove the wireless mini-card out of the mini-card connector . 1 wireless mini-card 2 mini-card connector 1 2 book.
36 | Replacing the Wireless Mini-Card Replacing the W ireless Mini-Card WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the I/O Board | 37 Removing the I/O Board WARNI NG: Before working in side your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
38 | Replacing the I/O Board Replacing the I/O Board WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the System Board | 39 Removing the System Board WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
40 | Removing th e System Board Procedure 1 Disconnect the power- adapter-port ca ble and the speaker cable fr om the system board. 2 Peel the mylar sleeve from the system board. 1 power-adapter-port cable 2 speaker cable 3m y l a r s l e e v e 1 3 2 book.
Removing the System Boar d | 41 3 Peel the tape that sec ures the disp lay cabl e to the system board and disconnect the display cable from the system board. 4 Lift the connector latch and, using the pull-tab, disconnect the I/O-board cable from the system board.
42 | Removing the System Board 5 Remove the screws that secure the system board to the c omputer base. 6 Lift the system board at an angle and r e le ase the system-board ports from the slots on the computer base. 7 Lift the system-board assemb ly off the computer base.
Replacing the System Board | 43 Replacing the System Board WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
44 | Replacing the System Board Postrequisites 1 Replace the wireless Mini-Card. See "Replacing the W ireless Mini-Card" on page 36. 2 Replace the palm-rest. See "Replacing the Palm-Rest" on page 33. 3 Replace the keyboard. See "Replacing the Keyboard" on page 19.
Removing the Fan | 45 Removing the Fan WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
46 | Removing the Fan Procedure 1 Disconnect the fan cable from the system board. 2 Remove the screw that secures the fan to the system board. 3 Lift the fan along with the cable, off the comp uter base. 1f a n c a b l e 2 s c r e w 3f a n 1 2 3 book.
Replacing the Fan | 47 Replac ing th e Fan WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
48 | Removing the Cooling A ssembly Removing the Cooling Assembly WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Cooling Assembly | 49 Procedure 1 In sequential or der (indicated on the heat-si nk), re move the scre ws th at secu re the cooling assembly to the system board. 2 Lift the cooling assembly off the system board. 1 cooling assembly 2 screws (6) 2 1 book.
50 | Replacing the Cooling Assembly Replacing the Cooling Assembly WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Hard-Drive Interposer Board | 51 Removing the Hard-Drive Interposer Board WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
52 | Removing the Hard-Drive Interposer Board Procedure 1 Remove the screws that secure the hard-drive interposer board to the system board. 2 Disconnect the hard-drive interpos er board from the system boar d. 1 screws (2) 2 hard-d rive interposer board 1 2 book.
Replacing the Hard- Drive Interposer Board | 53 Replacing the Hard-Drive Interposer Board WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
54 | Removing the Speakers Removing the Speakers WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9. After working inside your compute r , follo w the instructions in "After Working Inside Y our Computer" on page 11.
Removing the Speakers | 55 Procedure 1 Remove the screws that secure the speakers to the computer base. 2 Note the speaker -cable routing and remo ve the cable from its routing guides. 3 Lift the speakers, along with the speaker cable, off the computer base.
56 | Replacing the Speakers Replacing the Speakers WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Display Assembly | 57 Removing the Display Assembly WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
58 | Removing the Display Assembly Procedure 1 Note the antenna cable routi ng and remove the cable from its routing guides. 2 Remove the screws that secure the di splay assembly to the computer base. 3 Lift the display assembly off the computer base.
Replacing the Display Assembly | 59 Replacing the Display Assembly WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
60 | Removing the Display Bezel Removing the Display Bezel WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Display Bezel | 61 Procedure 1 Using your fingert ips, carefu lly pry up the inside edge of the display bezel. 2 Remove the display bezel off the display back-cover .
62 | Replacing the Display Bezel Replacing the Display Bezel WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Display Hinges | 63 Removing the Display Hinges WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
64 | Removing the Display Hinges Procedure 1 Remove the screws that secure the display hinges to the display back-cover . 2 Lift the display hinges o ff the display back-cover .
Replacing the Display Hinges | 65 Replacing the Display Hinges WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
66 | Removing the Display Panel Removing the Display Panel WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Display Panel | 67 Procedure 1 Remove the screws that secure the di splay panel to the display back-cover. 2 Gently lift the display panel a nd turn it over .
68 | Removing the Display Panel 3 Peel the tape adhered over the display cable. 4 Disconnect the display cable from the display-panel cable connector .
Replacing the Display Panel | 69 Replacing the Display Panel WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
70 | Removing the Camera Module Removing the Camera Module WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Camera Module | 71 Procedure 1 Disconnect the camera cable from the camera module. 2 Remove the screw that secures the camera module to the display back-c over . 3 Lift camera module off the display back-cover. 1 screw 2 camera module 3c a m e r a c a b l e 1 2 3 book.
72 | Replacing the Camera Module Replacing the Camera Module WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
Removing the Power- Adapter Port | 73 Removing the Power-Adapter Port WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
74 | Removing the Power- Adapter Port Procedure 1 Note the routing of the power-adapter -port cab le and remove the power-adapter -port cable from the routing guides on the comput er base. 2 Lift the power-adapter port, along with its cable, off the computer base.
Replacing the Power- A dapter Port | 75 Replacing the Power- Adapter Port WARNI NG: Before workin g inside your computer, read the safety infor mation that shipped with your computer and follow the steps in "Befor e Y ou Begin" on page 9.
76 | Flashing the BIOS Flashing the BIOS The BIOS may require flashing when an update is available or when replacing the system board. To flash the BIOS: 1 T urn on the computer . 2 Go to dell.com/suppo rt . 3 Click Start Here under Support for Home Users .
Ein wichtiger Punkt beim Kauf des Geräts Dell P17E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell P17E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell P17E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell P17E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell P17E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell P17E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell P17E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell P17E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell P17E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
