Benutzeranleitung / Produktwartung L321X des Produzenten Dell
Zur Seite of 74
Dell XPS 13 Owner’ s Manual Computer model: L321x Regulatory model: P29G Regulatory type: P29G001 OM_Book.book Page 1 Tuesda y, February 28, 2012 10:16 AM.
Notes, Cautions, and W arnings NOTE: A NOTE indicates important information that helps you make b etter use of your computer . CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WAR N IN G: A WARNING indicates a potential for property damage, personal injury , or death.
Contents 3 Contents 1 Before Y ou Begin . . . . . . . . . . . . . . . . . . . . 9 T urn Off Y our Computer and Connected Devices . . . . . 9 Safety Instructio ns . . . . . . . . . . . . . . . . . . . . 10 Recommended T ools . . . . . . . . . . . . . .
4 Contents Removing the Battery . . . . . . . . . . . . . . . . . . 17 Replacing the Battery . . . . . . . . . . . . . . . . . . 18 Postrequisites . . . . . . . . . . . . . . . . . . . . . . 18 6 Speakers . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5 9 Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . 29 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . 29 Removing the Heat Sink . . . . . . . . . . . . . . . . . 29 Replacing the Heat Sink . . . . . . . . . . . . . . .
6 Contents Postrequisites . . . . . . . . . . . . . . . . . . . . . . 41 13 Sy stem Board . . . . . . . . . . . . . . . . . . . . . 43 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . 43 Removing the Sy stem Board . . . . . . . . . . . . . .
Contents 7 16 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . 59 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . 59 Removing the Keyboard . . . . . . . . . . . . . . . . . 60 Replacing the Keyboard . . . . . . . . . . . . . . . .
8 Contents OM_Book.book Page 8 Tuesda y, February 28, 2012 10:16 AM.
Before Y ou Begin 9 Before Y ou Begin T urn Off Y our Computer and Connected Devices CAUTION: T o avoid losing data, save and close all open files and exit all open programs before you turn off your computer . 1 Save and close all open files and exit all open programs.
10 Before Y ou Begin Safety Instructions Use the following safety guidelines to protec t your computer from potential damage and ensur e your personal safety . WAR N IN G: Before working inside your comput er , read the safety information that shipped with your computer .
After W orking Inside Y our Computer 11 2 After W orking Inside Y our Computer After you complete replacement pr ocedur es, ensure the following: • R e p la c e a l l s c rew s a nd e ns u re t h a .
12 After W orking Inside Y our Computer OM_Book.book Page 12 Tuesday, February 28, 2012 10:16 AM.
Base Cover 13 3 Base Cover WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
14 Base Cover Replacing the Base Cover 1 Align the base cover with the palm-rest assembly and press the base cover into pla ce. 2 Us i ng a T or x 5 s cre w dr i ve r , re pl a ce th e sc re ws t ha t se cu re th e b a se c ov e r t o the palm-rest assembly .
Power -Light Board 15 4 Power -Light Board WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
16 Power -Light Board Replacing the Power -Light Board 1 Align the screw hole on the power -light board with the scr ew hole on the palm-rest assembly .
Battery 17 5 Battery WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
18 Battery Replacing the Battery 1 Align the screw holes on the battery with the screw holes on the palm-rest assembly . 2 Replace the screws that secur e the battery to the palm-rest assembly . 3 Connect the battery cable to the system-board . Postrequisites 1 Replace the power-light board.
Speakers 19 6 Speakers WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
20 Speakers 2 Disconnect the left-speaker cable from the I/O board connector . 3 Release the Mini-Card cables from the routing guide on the left speaker . 4 Remove the two screws that secur e the left speaker to the palm-rest assembly . 5 Lift the left speaker off the palm-rest assembly .
Speakers 21 Right Speaker 1 Disconnect the right-speaker cable from the system-boar d connector . 2 Remove the two screws that secur e the right speaker to the palm-rest assembly . 3 Lift the right speaker off the palm-rest assembly . 1 screws (2) 2 right-speaker cable 1 2 OM_Book.
22 Speakers Replacing the Speakers Left Speaker 1 Align the screw holes on the left speaker with the screw holes on the palm-rest assembly . 2 Replace the two screws that se cur e the left speaker to the palm-rest assembly . 3 Route the mini-card cables through the routing guide on the left speaker .
Wireless Mini-Card 23 7 Wireless Mini-Card WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
24 Wireless Mini-Card Removing the Mini-Card 1 Disconnect the mini-card cables from the connectors on the mini-car d. 2 Remove the screw that secur es the mini-card to the system board. 3 Slide and remove the mini-card ou t of the system-board connector .
Wireless Mini-Card 25 Replacing the Mini-Card 1 Remove the new mini-card from its packaging. 2 Align the notch on the mini-car d with the tab in the system-boa rd connect or . CAUTION: Use firm and even pressure to slide t he mini-card into place. If you use excessive force, you may damage the connector .
26 Wireless Mini-Card Postrequisites 1 Replace the right speaker . Se e "R eplacing the Speakers" on page 22. 1 Replace the battery . See "Repla cing the Battery" on page 18. 2 Replace the power-light board. See "Replacing the P ow er -Light Board" on page 16.
Solid-State Drive 27 8 Solid-State Drive WAR N IN G: Before working inside your computer , read the safety information that shipped with your computer and follo w the steps in "Before Y ou Begin" on page 9. For additional safety best prac tices information, see the Regulatory Compliance Homepage at dell.
28 Solid-State Drive 3 Slide and remove the solid-state drive out of the system-boar d connector . Replacing the Solid-State Drive 1 Align the notch on the solid-st ate drive with the tab in the system-board connector . CAUTION: Use firm and even pressure to sli de the solid-state drive into place.
Heat Sink 29 9 Heat Sink WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
30 Heat Sink Replacing the Heat Sink NOTE: The original thermal grea se can be reused, if the original sy stem board and heat sink are reinstalled together . If either the sy stem board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.
Fan 31 10 Fan WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
32 Fan 2 Disconnect the power-adapter connector cable from the system-board connector . 3 Release the power -adapter connector cable from the routing gui des on the fan. 4 Disconnect the fan cable from the I/O board connector . 5 Remove the scr ews that secure th e fan to the palm-r est assembly .
Fan 33 Replacing the Fan 1 Align the screw holes on the fan with the screw ho les on the palm-rest assembly . 2 Replace the screws that secure th e fan to the palm-rest assembly . 3 Connect the fan cable to the I/O board connector . 4 Route the power -adapter connector cable through the routing guides on the fan.
34 Fan OM_Book.book Page 34 Tuesday, February 28, 2012 10:16 AM.
Power -Adapter Connector 35 11 Power -Adapter Connector WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
36 Power -Adapter Connector 4 Disconnect the power-adapter connector cable from the system-board connector . 5 Release the power -adapter connector cable from the routing gui des on the fan. 6 Remove the screw that secur es th e power -adapter connector to the palm-rest assembly .
Power -Adapter Connector 37 Replacing the Power -Adapter Connector 1 Align the screw hole on the power-ad apter connector with the screw hole on the palm-rest assembly . 2 Replace the scr e w that secur es th e power -adapter connector to the palm-rest assembly .
38 Power -Adapter Connector 7 Connect the mini-card cables to the connectors on the mini-car d. The following table provides the mini-card cable color scheme for the mini-card supported by your computer . Postrequisites 1 Replace the speakers. See "Repla cing the Speak ers" on page 22.
I/O Board 39 12 I/O Board WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
40 I/O Board Removing the I/O Board 1 Remove the screw that secur es the I/ O board to the palm-rest assembly . 2 Lift the I/O board off the palm-rest assembly . Replacing the I/O Board 1 Align the screw holes on the I/O board with the scr ew holes on the palm-rest assembly .
I/O Board 41 Postrequisites 1 Replace the fan. See "Replacing the F an" on page 33. 2 Replace the power -adapter connector . See "Replacing the P ower -Adapter Connector" on page 37. 3 Replace the speakers See "Repla cing the Speakers" on page 22.
42 I/O Board OM_Book.book Page 42 Tuesday, February 28, 2012 10:16 AM.
Sy stem Board 43 13 Sy stem Board WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
44 Sy stem Board Removing the Sy stem Board NOTE: Y our computer’ s service tag is stored in the sy stem board. Y ou must enter the service tag in the BIOS after you replace the sy stem-board assembly .
Sy stem Board 45 3 Remove the screws that secure the sy stem board to the palm-r est assembly . 4 T urn the system board over and pl ace it over the palm-r est assembly . 5 Lift the connector latch and disconnect the keyboard cable from the system board connector .
46 Sy stem Board Replacing the Sy stem Board 1 Slide the keyboar d cable into the sy stem-board connector and press down on the connector latch to secure the cable. 2 Align the screw holes on the system board with the screw holes on the palm-rest assembly .
Sy stem Board 47 Postrequisites 1 Replace the fan. See "Replacing the F an" on page 33. 2 Replace the heat sink. See "Replacing the Heat Sink" on page 30. 3 Replace the solid-state drive. See "Replacing the Solid-State Drive" on page 28.
48 Sy stem Board OM_Book.book Page 48 Tuesday, February 28, 2012 10:16 AM.
Coin-Cell Battery 49 14 Coin-Cell Battery WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
50 Coin-Cell Battery Removing the Coin-Cell Battery CAUTION: Removin g the coin-cell battery resets the BIOS settings to default. It is recommended that you note t he BIOS settings before removing the coin-cell battery . 1 Using a plastic scribe, gently pry out th e coin-cell battery out of the battery socket on the system board.
Coin-Cell Battery 51 Postrequisites 1 Replace the system board. See "Repla cing the System Board" on page 46. 2 Replace the fan. See "Replacing the F an" on page 33. 3 Replace the heat sink. See "Replacing the Heat Sink" on page 30.
52 Coin-Cell Battery OM_Book.book Page 52 Tuesday, February 28, 2012 10:16 AM.
Display Assembly 53 15 Display Assembly WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
54 Display Asse mbly 2 Disconnect the power-adapter connector cable from the system-board connector . 3 Release the power -adapter connector cable from the routing gui des on the fan. 4 Disconnect the mini-card cables from the connectors on the mini-car d.
Display Assembly 55 6 Release the mini-card cables from the routing guides. 7 Remove the screws that secure the display assembly to the palm-rest assembly .
56 Display Asse mbly 8 Gently lift the palm-rest assembly to a 90-degr ee angle and then release the palm-rest assembly o ff the display assembly . Replacing the Display Assembly 1 Slide and place the palm-rest asse mbly o ver the display assembly .
Display Assembly 57 6 Connect the mini-car d cables to the connectors on the mini-car d. The following table provides the mi ni-car d cable color scheme for the mini-card supported by your computer . 7 Route the power -adapter connector cable through the routing guides on the fan.
58 Display Asse mbly OM_Book.book Page 58 Tuesday, February 28, 2012 10:16 AM.
Keyboard 59 16 Keyboard WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
60 Keyboard Removing the Keyboard 1 Remove the screw that secur es the mini-card clamp. 2 Remove the mini-card clamp off the palm-rest assembly . 3 Remove the scr ews that secure the keyboar d to the palm-rest assembly . 4 Lift the keyboar d off the palm-rest assembly .
Keyboard 61 Replacing the Keyboard 1 Align the screw holes on the keyboar d with the screw holes on the palm- res t as s em bl y . 2 Replace the screws that secure the k eyboard to the palm-rest assembly . 3 Align the screw hole on the mini-card clamp with the screw hole on the palm-rest assembly .
62 Keyboard OM_Book.book Page 62 Tuesday, February 28, 2012 10:16 AM.
Palm-Rest Assembly 63 17 Palm-Rest Assembly WAR N IN G: Befor e working inside your computer , read the safe ty information that shipped with your computer and follow th e steps in "Before Y ou Begin" on page 9. For additional safety best practices info rmation, see the Regulatory Compliance Homepage at dell.
64 Palm-Rest Assembly Removing the Palm-Rest Assembly 1 Remove the screws that secur e the display assembly to the palm-rest assembly . 2 Gently lift the palm-rest assembly to a 90-degr ee angle and then release the palm-rest assembly o ff the display assembly .
Palm-Rest Assembly 65 Postrequisites 1 Replace the keyboar d. See "Replacing the Keyboar d" on page 61. 2 Replace the system board. See "Repla cing the System Board" on page 46. 3 Replace I/O board. See "Replaci ng the I/O Board" on page 40.
66 Palm-Rest Assembly OM_Book.book Page 66 Tuesday, February 28, 2012 10:16 AM.
Sy stem Setup Utility 67 18 Sy stem Setup Overview Use the system setup to: • Get information about the h ardwar e installed in your compu ter , such as the amount of RAM, the size of the hard drive.
68 Sy stem Setup Utility Sy stem Setup Options NOTE: Depending on your computer and installed devices, the items listed in this section may appear , or may not appear exactly as listed. Setup Item — Thi s field appe ars on the left side of the system setup window .
Sy stem Setup Utility 69 CPU Cache L1 Cache Displays the processor L1 cache size. L2 Cache Displays the processor L2 cache size. L3 Cache Displays the processor L3 cache size. Fixed HDD Displays the device name and size. AC Adapter Type Displays the device name and type.
70 Sy stem Setup Utility Battery Health Displays the battery health of your computer . Intel (R) Smart Connect Technology If enabled, allows your computer t o check for updates even when in Sleep state. Intel (R) Rapid Start Technology iRST Support If enabled, will allow you to configure a RAID con troller on your system.
Sy stem Setup Utility 71 Boot Sequence This feature allows you to change the boot sequence for devices. Boot Options • Removable Drive — The computer attempts to boot from the removable drive. If no operating system is on the drive, the computer generates an error message.
72 Sy stem Setup Utility NOTE: T o boot to a USB device, the devi ce must be bootable. T o ensure that your device is bootable, check the device documentation. • CD/D VD/CD-R W Drive — The computer attempts to boot from the optical drive. If no d isc is in the drive, or if the disc is not bootable , the computer generates an error message.
Flashing the BIOS 73 19 Flashing the BIOS The BIOS may require flashing when an update is avai lable or when replacing the system board. T o flash the BIOS: 1 T urn on the computer .
74 Flashing the BIOS OM_Book.book Page 74 Tuesday, February 28, 2012 10:16 AM.
Ein wichtiger Punkt beim Kauf des Geräts Dell L321X (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell L321X noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell L321X - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell L321X reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell L321X erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell L321X besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell L321X verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell L321X. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell L321X gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
