Benutzeranleitung / Produktwartung INSPIRON Inspiron 5000 des Produzenten Dell
Zur Seite of 29
Removing and Replacing Parts: Dell™ Inspiron™ 5000 Series NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Precautionary Measures NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Customer-Accessible Components NOTICE: The steps in this section may be performed by customers. Disconnect the AC adapter cable from the computer. 1. If the computer is connected to a port replicator, pull both release handles on the sides of the replicator to undock the computer.
NOTICE: Use the PC Card configuration utility on the taskbar to select and stop a card before removing it from the computer. If you do not remove the card in the configuration utility, you could lose data from open application programs. Remove any PC Cards: Press the eject button.
NOTICE: When the hard-disk drive is not in the computer, store it in a hard-disk drive case or protective wrapping to protect it from exposure to static electricity. NOTICE: Handle the hard-disk drive gently; do not bump or drop the drive. Rough handling of the drive could induce failure or loss of data.
Remove the device from the media bay: Close the display and turn the computer upside-down. . Slide and hold the latch release away from the media bay device. b. Pull the device out of the media bay. c. 8. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Screw Counts and Locations NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. You may find it helpful to print the following table to use for keeping the screws organized as you disassemble the computer.
LED/Inverter Board 2 ZIF Connectors NOTICE: ZIF connectors are fragile. To avoid breaking the connectors, touch them carefully. Do not apply too much pressure to the movable part of the connector when opening or closing it. Some of the interface connectors are zero insertion force (ZIF) connectors.
To reinsert the modem when you reassemble the computer, perform the following steps: Attach the modem cable. 1. Insert the modem into the socket, and rock it up and down until it is completely in place. 2. NOTICE: Fold the modem cable out of the way of the modem door to make sure you do not cut it when you close the modem door.
Open the display, and lift off the hinge cover by rotating it toward you. 2. To replace the hinge cover, perform the following steps: Insert the hinge cover at a 45° angle. 1. Press the hinge cover down above the <F4>, <F5>, and <Print Screen> keys.
Slide the keyboard out from under the palmrest. 2. Detach the cable from the ZIF connector . 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Thermal Shield Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the thermal shield screws. Inspiron 5000 computers have 4 screws (first photo), and Inspiron 5000e computers have 5 screws (second photo).
Remove the diskette-drive cable clip (held in place by the leftmost thermal shield screw). 2. Lift off the thermal shield. 3. NOTICE: Be sure to replace the diskette-drive cable clip (held in place by the leftmost thermal shield screw) when you replace the thermal shield.
Lift out the module. 2. When you replace the processor, be sure to attach it to the connector. 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
When you replace the processor during reassembly, be sure to attach it to the connector. LCD Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Diskette Drive Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Detach the data cable. 1. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Remove the drive retaining screws from the bottom of the computer. 2. Remove the drive from the chassis. 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Palmrest Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the three screws from the top of the computer.
Remove the two screws (outer corners) from the bottom of the computer. If you plan to remove the system board, also remove the three screws adjacent to the memory module slots and the modem. 2. Remove the three screws from the hard-disk drive compartment.
Remove the four screws from the battery bay. 4. Remove the five screws from the media bay. 5. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Speaker and Volume Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the nine screws. 1. Disconnect the speaker cable.
Support Rail Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the four screws. 1. Disconnect the fan cable.
Remove the seven screws from the back of the computer. 3. Infrared Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
System Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the two screws. 1. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Remove the eight I/O port nuts. 2. Flex the base plastics to separate the system board from the audio connector posts on the left side of the computer. 3. Lift the system board up and out from the base plastics. 4. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
14.1-Inch XGA Display Disassembly Bezel Removal Remove the two screw covers from the bottom corners of the LCD bezel. 1. Remove the two bumpers from the top corners of the LCD bezel. 2. Remove the four screws from the corners of the LCD bezel. 3. Ease your fingers under the bezel on the bottom of the bezel.
Once you have disengaged all of the retaining tabs, lift the bezel from the LCD panel. 5. Panel Removal NOTICE: It is not necessary to remove the display locking tabs when removing the panel. Remove the two screws from each side of the panel. 1. Disconnect the cold cathode fluorescent lamp (CCFL) cable from the bottom of the panel.
Bezel Removal Remove the two screw covers from the bottom corners of the LCD bezel. 1. Remove the two screws from the bottom corners of the LCD panel. 2. Ease your fingers under the bezel at the top of the panel. Work your way around the bezel and disengage all the retaining tabs.
Disconnect the CCFL cable from the bottom of the panel. 3. Disconnect the flex cable from the LCD panel. 4. Lift the LCD panel from the back cover. 5. LED/Inverter Board Removal Remove the two screws from the LED/inverter board. 1. Disconnect the flex cable from the ZIF connector on the bottom side of the LED/inverter board.
Ein wichtiger Punkt beim Kauf des Geräts Dell INSPIRON Inspiron 5000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell INSPIRON Inspiron 5000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell INSPIRON Inspiron 5000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell INSPIRON Inspiron 5000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell INSPIRON Inspiron 5000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell INSPIRON Inspiron 5000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell INSPIRON Inspiron 5000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell INSPIRON Inspiron 5000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell INSPIRON Inspiron 5000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
