Benutzeranleitung / Produktwartung FX160 des Produzenten Dell
Zur Seite of 63
Dell™OptiPlex™FX160/160ServiceManual Notes, Notices, and Cautions IfyoupurchasedaDell™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft ® Windows ® operating systems are not applicable.
Back to Contents Page Antenna Dell™OptiPlex™FX160/160ServiceManual Removing the Antenna Replacing the Antenna Removing the Antenna 1. Perform the procedure in Before Working on Your Computer . 2. Remove the hard drive bracket assembly, if installed (see Removing the Hard Drive Bracket Assembly ).
6. Replace the WLAN card (see Replacing the Wireless Card ). 7. Route the antenna cable under the tab on the back of the chassis so that the wire mesh surrounding the cable is under the tab. 8. Replace the hard drive bracket assembly if it was removed (see Replacing the Hard Drive Bracket Assembly ).
Back to Contents Page Working on Your Computer Dell™OptiPlex™FX160/160ServiceManual Recommended Tools Before Working on Your Computer After Working on Your Computer This document provides procedures for removing and installing the components in your computer.
5. If applicable, remove the computer stand (see Removing the Computer Stand ). 6. Remove the computer cover (see Removing the Computer Cover ). After Working on Your Computer After you complete any replacement procedures, ensure you connect any external devices, cards, cables, etc.
Back to Contents Page Cable Guide Dell™OptiPlex™FX160/160ServiceManual Removing the Cable Guide Replacing the Cable Guide Removing the Cable Guide 1. Remove the screw that secures the cable guide to the system board.
Back to Contents Page Coin - Cell Battery Dell™OptiPlex™FX160/160ServiceManual Removing the Coin - Cell Battery Replacing the Coin - Cell Battery One of two types of coin - cell battery sockets is provided with the your computer.
Back to Contents Page Covers Dell™OptiPlex™FX160/160ServiceManual Removing the Computer Cover Replacing the Computer Cover Removing the Side Cover Replacing the Side Cover Removing the Computer Cover 1.
5. Reattach the security cable to your computer, if necessary. Removing the Side Cover 1. Lift the back edge of the side cover away from the chassis, then slip the hooks under the front edge of the side cover out of the slots on the side of the chassis.
Back to Contents Page 1 peg (2) 2 peg retainer (2) 3 side cover hooks (2) 4 side cover hook slots(2).
Back to Contents Page Finding Information Dell™OptiPlex™FX160/160ServiceManual Back to Contents Page NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not be available in certain countries.
Back to Contents Page Hard Drive Assembly (Optional) Dell™OptiPlex™FX160/160ServiceManual Removing the Hard Drive Bracket Assembly Replacing the Hard Drive Bracket.
Removing the Hard Drive 1. Perform the procedure in Before Working on Your Computer . 2. Remove the hard drive bracket assembly (see Removing the Hard Drive Bracket Assembly ). 3. Disconnect the SATA data/power cable from the hard drive.
5. Replace the hard drive bracket assembly (see Replacing the Hard Drive Bracket Assembly ). 6. Perform the procedure in After Working on Your Computer . Removing the Hard Drive Fan 1. Perform the procedure in Before Working on Your Computer .
Back to Contents Page Processor Heatsink Assembly Dell™OptiPlex™FX160/160ServiceManual Removing the Processor Heatsink Assembly Replacing the Processor Heatsink Assembly Removing the Processor Heatsink Assembly 1.
4. Replace the hard drive bracket assembly if it was removed (see Replacing the Hard Drive Bracket Assembly ). 5. Perform the procedure in After Working on Your Computer .
Back to Contents Page Getting Help Dell™OptiPlex™FX160/160ServiceManual Obtaining Assistance Problems With Your Order Product Information Returning I.
www.dell.ca (Canada only) You can access Dell Support through the following websites and e - mail addresses: l Dell Support websites: support.dell.com support.jp.dell.com (Japan only) support.euro.dell.com (Europe only) l Dell Support e - mail addresses: mobile_support@us.
You are responsible for paying shipping expenses. You are also responsible for insuring any product returned, and you assume the risk of loss during shipment to Dell. Collect On Delivery (C.O.D.) packages are not accepted. Returns that are missing any of the preceding requirements will be refused at Dell's receiving dock and returned to you.
Back to Contents Page I/O Board Dell™OptiPlex™FX160/160ServiceManual Removing the I/O Board Replacing the I/O Board Removing the I/O Board 1. Perform the procedure in Before Working on Your Computer . 2.
4. Perform the procedure in After Working on Your Computer . Back to Contents Page 1 cable guide metal tab 2 metal clip.
Back to Contents Page Memory Dell™OptiPlex™FX160/160ServiceManual Removing a Memory Module Replacing a Memory Module Your computer supports one or two memory modules. Removing a Memory Module 1. Perform the procedure in Before Working on Your Computer .
3. Perform the procedure in After Working on Your Computer . Back to Contents Page connector 3 DIMM_2 memory connector 4 securing clip (two per connector, white – DIMM_1, black – DIMM_2).
Back to Contents Page NVRAM Module Dell™OptiPlex™FX160/160ServiceManual Removing the NVRAM Module Replacing the NVRAM Module Removing the NVRAM Module 1. Perform the procedure in Before Working on Your Computer .
Back to Contents Page .
Back to Contents Page Power Supply Dell™OptiPlex™FX160/160ServiceManual Removing the Power Supply Replacing the Power Supply Removing the Power Supply 1. Perform the procedure in Before Working on Your Computer .
2. Secure the power supply with a back panel screw and the chassis screw. 3. Connect the 12V power supply connector to the system board (see System Board Connectors ).
Back to Contents Page Reinstalling Software Dell™OptiPlex™FX160/160ServiceManual Drivers Restoring Your Operating System User Accounts and Passwords Drivers Identifying Drivers Microsoft ® Windows ® XP Embedded and Windows XP 1.
b. If the Control Panel window appears in Category View ( Pick a category ), switch to Classic View (icon view). c. Double - click the System icon. d. In the System Properties window, click the Hardware tab, and then click Device Manager .
8. Click Finish and restart your computer. Restoring Your Operating System Depending on your system configuration, you can restore your operating system in the following ways: l For systems with the operating system installed on NVRAM module, the operating system can be re - imaged.
Restoring Your Operating System Using the Operation System Media Before you Begin If you are considering reinstalling the Windows operating system to correct a problem with a newly installed driver, first try using Windows Device Driver Rollback. See Returning to a Previous Device Driver Version .
3. Click Administrative Tools ® UserManager . 4. In the left pane, click either Users or Groups , then double - click the name whose attributes you want to change. Windows XP 1. Click Start ® Control Panel. 2. If the Control Panel window appears in Category View ( Pick a category ), switch to Classic View (icon view).
Back to Contents Page Computer Stand Dell™OptiPlex™FX160/160ServiceManual Removing the Computer Stand Replacing the Computer Stand Removing the Computer Stand 1. Gently press down on the metal tab at the back of the computer.
Back to Contents Page System Board Assembly Dell™OptiPlex™FX160/160ServiceManual System Board Connectors Removing the System Board Assembly Replacing the System Board System Board Connectors Removing the System Board Assembly 1.
8. Disconnect the I/O board cables from the system board. 9. Disconnect the 12V power supply connector from the system board (see System Board Connectors ). 10. Remove the cable guide (see Removing the Cable Guide ). 11. Remove the two screws on the back corners of the system board that secure it to the chassis.
10. Replace the NVRAM module if it was removed (see Replacing the NVRAM Module ). 11. Replace the processor heatsink assembly (see Replacing the Processor Heatsink Assembly ). 12. Replace the hard drive bracket assembly if it was removed (see Replacing the Hard Drive Bracket Assembly ).
Back to Contents Page System Setup Dell™OptiPlex™FX160/160ServiceManual Overview Use the BIOS Setup Utility to: l To change the system configuration information after yo.
Setup Lock Setup lock (SETUP_LOCK, see System Board Connectors ) is a hardware feature that interacts with the settings of the BIOS Admin Password option, the BIOS Password Changes option, and the hardware Password jumper (PSWD) to produce a specific behavior of the Setup screens.
Changing Boot Sequence for Future Boots When establishing the boot sequence, first establish the boot order of devices within device type groups, then select the boot order of device types. 1. Enter the BIOS Setup Utility (see Entering the BIOS Setup Utility ).
7. Replace the jumper on the password jumper (PSWD) pins. 8. Perform the procedure in After Working on Your Computer . 9. Restart your computer and enter Setup (see Entering the BIOS Setup Utility ). 10. Assign new system and/or administrator password(s).
Back to Contents Page .
Back to Contents Page Dell™OptiPlex™FX160/160ServiceManual IfyoupurchasedaDell™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft ® Windows ® operating systems are not applicable.
Back to Contents Page Troubleshooting Dell™OptiPlex™FX160/160ServiceManual Tools Dell Diagnostics Solving Problems Dell Technical Update Service .
Beep Codes Your computer may emit a series of beeps during start - up if the monitor cannot display errors or problems. For example, one possible beep code may consist of three short, repeated beeps indicating that the computer has encountered a possible system board failure.
System Messages Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support — The computer failed to complete the boot routine three consecutive times for the same error (see Contacting Dell for assistance).
Not a boot diskette — Insert a bootable floppy disk and restart your computer. NOTICE – Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly.
Before running the Dell Diagnostics, enter the BIOS Setup Utility to review your computer's configuration information, and ensure that the device you want to test is displayed in the BIOS Setup Utility and is active. 1. Ensure that the computer is connected to an electrical outlet that is known to be working properly.
6. Press any key to confirm that you want to start from the CD/DVD. 7. Type 1 to Run the 32 Bit Dell Diagnostics . 8. At the Dell Diagnostics Main Menu , type 1 to select Dell 32 - bit Diagnostics for Resource CD (graphical user interface) .
Solving Problems Follow these tips when troubleshooting your computer: l If you added or removed a part before the problem started, review the installation procedures and ensure that the part is correctly installed. l If a peripheral device does not work, ensure that the device is properly connected.
Clean the drive or disc — use commercially available disc cleaning materials to ensure the disc and optical drive are clean. Run the Hardware Troubleshooter — See Hardware Troubleshooter . Run the Dell Diagnostics — See Dell Diagnostics .
5. If a disk problem is found, follow the screen instructions to fix the problem. Windows Vista : 1. Click Start and click Computer . 2. Right - click Local Disk C: . 3. Click Properties ® Tools ® Check Now . The User Account Control window may appear.
3. Click Uninstall . 4. See the program documentation for installation instructions. drive letter : is not accessible. The device is not ready — The drive cannot read the disk. Insert a disk into the drive and try again. Insert bootable media — Insert a bootable floppy disk, CD, or DVD.
End the program — 1. Press <Ctrl><Shift><Esc> simultaneously to access the Task Manager. 2. Click the Applications tab.
l Ensure that the program is compatible with the operating system installed on your computer. l Ensure that your computer meets the minimum hardware requirements needed to run the software. See the software documentation for information. l Ensure that the program is installed and configured properly.
Windows XP and Windows XP Embedded: 1. Click Start ® Control Panel . 2. If the Control Panel window appears in Category View ( Pick a category ), switch to Classic View (icon view). 3. Click Mouse . 4. Adjust the settings as needed. Windows Vista : 1.
l Reseat the power cable in the power connector on the back of the computer and the electrical outlet. l Bypass power strips, power extension cables, and other power protection devices to verify that the computer turns on properly. l Ensure that any power strips being used are plugged into an electrical outlet and are turned on.
Reinstall the printer driver — See the printer documentation for information on reinstalling the printer driver. Scanner Problems Check the scanner documentation — See the scanner documentation for setup and troubleshooting information.
Ensure that the speakers are turned on — See the setup diagram supplied with the speakers. If your speakers have volume controls, adjust the volume, bass, or treble to eliminate distortion. Adjust the Windows volume control — Click or double - click the speaker icon in the lower - right corner of your screen.
The screen is blank The screen is difficult to read Check the monitor cable connection — l Ensure that the monitor cable connector is properly attached to the video connector. l Remove any video extension cables and connect the monitor directly to the computer.
.
Back to Contents Page Selective USB Dell™OptiPlex™FX160/160ServiceManual Overview Enabling Selective USB Overview Selective USB allows administrators to restrict two USB ports to support only a keyboard and a mouse and disable all other USB ports.
Back to Contents Page Wireless Card Dell™OptiPlex™FX160/160ServiceManual Removing the Wireless Card Replacing the Wireless Card Removing the Wireless Card 1. Perform the procedure in Before Working on Your Computer .
4. Route the antenna cable to ensure that the metal mesh sleeve on the cable is secured by the tab on the back panel. 5. Replace the hard drive bracket assembly if it was removed (see Replacing the Hard Drive Bracket Assembly ). 6. Perform the procedure in After Working on Your Computer .
Ein wichtiger Punkt beim Kauf des Geräts Dell FX160 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell FX160 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell FX160 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell FX160 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell FX160 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell FX160 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell FX160 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell FX160. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell FX160 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
