Benutzeranleitung / Produktwartung E2311H des Produzenten Dell
Zur Seite of 33
Dell™E2211H/E2311HmonitorUser'sGuide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E2211H/E2311HmonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The Dell™E2211H/E2311H flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features include: ■ E2211H: 54.52cm(21.5inch)viewableareadisplay(Measureddiagonally).
Back View Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power button (with.
Side View Bottom View Right view Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect the power cable 2 DVI connector Connect your compute.
*[E2211H] color gamut (typical) is based on CIE1976 (81%) and CIE1931 (68%) test standards. ** [E2311H] color gamut (typical) is based on CIE1976 (81%) and CIE1931 (68%) test standards. Vertical 268.14 mm (10.56 inches) 286.74 mm (11.29 inches) Pixel pitch 0.
Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) 720 x 400 31.5 70.0 28.3 - /+ 640 x 480 31.5 60.0 25.2 -/ - 640 x 480 37.5 75.0 31.5 -/ - 800 x 600 37.9 60.
Physical Characteristics Model E2211H E2311H Connector type 15 - pin D - subminiature, blue connector; DVI - D, white connector 15 - pin D - subminiature, blue connector; DVI - D, white connector .
Environmental Characteristics Model E2211H E2311H Temperature Operating 0°Cto40°C 0°Cto40°C Non - operating Storage: - 20°Cto60°C( - 4°Fto.
IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotinuse.Thisis referred to as Power Save Mode *.
Back to Contents Page Appendix Dell™E2211H/E2311HmonitorUser'sGuide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Help on PowerNap Installation To install PowerNap succesfully, follow these steps: - Back to Contents Page 1.CheckOperatingSystemRequirements Windows XP, Windows Vista ® , Windows ® 7 2. Install Entech API Install 3.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor IfyouhavenonDell™desktop,portablecomputer,orgraphiccard In Windows XP: 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™E2211H/E2311HmonitorUser'sGuide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Pow.
Using the On - Screen Display (OSD) Menu Accessing the Menu System Main Menu for Analog (VGA) Input or Main Menu for Digital (DVI - D) Input Power (withpowerlight indicator) save mode.
Brightness / Contrast Use t his menu to activate Brightness/Contrast adjustment. Brightness Brightness adjusts the luminance of the backlight. Press the button to increase brightness and Press the NOTE: Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated.
.
.
.
AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self - adjust to the incoming video signal.
The following dialog appears on a black screen as the monitor automatically adjusts to the current input: NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration. NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
l RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. l YPbPr : Select this option if your DVD player supports only YPbPr output. Mode Selection Allows you to set the display mode to: l Graphics : Select this mode if your monitor is connected to your computer.
Press to increase the colorful appearance of the video image NOTE: Saturation adjustment is available only for video input. Reset Color Settings Resets your monitor's color settings to the factory defaults. DISPLAY SETTINGS Use the Display Settings to adjust image.
Back to Contents Page Setting Up Your Monitor Dell™E2211H/E2311Hmonitor Setting the display resolution to 1920 X 1080 (maximum) For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 X 1080 pixels by performing the following steps: In Windows XP: 1.
Dell™E2211H/E2311Hmonitor Information in this document is subject to change without notice. © 2010DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™E2211H/E2311HmonitorUser'sGuide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand To attach the monitor stand: 1.
Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot toorganizeallcablesasshownabove.
To remove the stand: 1. Place the monitor on a flat surface. 2. Press and hold the Stand release button. 3. Lift the stand up and away from the monitor. Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA - compatible base mounting kit.
Back to Contents Page Troubleshooting Dell™E2211H/E2311HmonitorUser'sGuide Troubleshooting Your Monitor Built - in Diagnostics Common Problems Pro.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel simultaneously for 2 seconds.
Product Specific Problems Dell™Soundbar Problems Missing Color Picture missing color l Perform monitor self - test feature check. l Ensure that the video cable connecting the monitor to the computer is connected properly and is secure. l Check for bent or broken pins in the video cable connector.
Back to Contents Page.
Ein wichtiger Punkt beim Kauf des Geräts Dell E2311H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell E2311H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell E2311H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell E2311H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell E2311H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell E2311H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell E2311H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell E2311H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell E2311H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
