Benutzeranleitung / Produktwartung E2210C des Produzenten Dell
Zur Seite of 34
Dell™ E1910/E2210 Flat Panel Monitor User's Guide Notes,Cautions,Warnings Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™ E1910/E2210 Flat Panel Monitor User's Guide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Product Features The Dell™ E1910 flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 19 - inch (482.6 mm) viewable area display. ■ 1440x900 resolution, plus full - screen support for lower resolutions.
■ Energy Saver feature for Energy Star ® compliance. ■ Security lock slot. ■ EPEAT™GOLDcompliant. ■ Halogen reduced. ■ Asset Management Capability. Identifying Parts and Controls Front View Back View Side View Front View Front Panel Controls Label Description 1.
Bottom View LeftView Right View B.
*[E1910/E22 10 ] color gamut (typical) is based on CIE1976 (83% ) and CIE1931 (72%) test standards. Color depth 16.7 millions colors 16.7 millions colors Color Gamut 83% (typical)* CIE1976 83% (typica.
Preset Display Modes E1910 E2210 Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 - /+ VESA, 640 x 480 31.5 60.0 25.2 -/ - VESA, 640 x 480 37.5 75.0 31.
Electrical Specifications Video input signals Analog RGB, 0.7 Volts +/ - 5%, positive polarity at 75 ohm input impedance Digital DVI - D TMDS, 600mV for each differential line, positive polarity at 50.
Environmental Characteristics Temperature Operating 5°to40°C(41°to104°F) Non - operating Storage: - 20°to60°C( - 4°to140°F) Shipping: - 20°to60°.
Back to Contents Page Appendix Dell™ E1910/E2210 Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™E1910/E2210FlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ E1910/E2210 Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ E1910/E2210 Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu .
Front panel Key Use the keys onthefrontofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Access.
1. Press the button to open the OSD menu and display the main menu. The table below provides a list of all the OSD menu options and their functions. Main Menu NOTE: Auto Adjust is only available when you are using the analog (VGA) connector. 2.
Back Press to go back to the main menu. Brightness Allows you to adjust the brightness or luminance of the backlight. Press the keytoincreasebrightnessandpressthe key to decrease brightness (min 0 ~ max 100).
Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor. VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. DVI -D Select DVI - D input when you are using the Digital (DVI) connector.
Input Color Format Allows you to set the video input mode to : l RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter l YPbPr : Select this option if your DVD player supports only YPbPr output .
l Movie : Loads color settings ideal for movies. This is the default preset mode. l Game : Loads color settings ideal for most gaming applications. l Sports : Loads color settings ideal for sports. l Nature: Loads color settings ideal for nature.
Back Press to go back to the main menu . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+) . NOTE: When using a DVI source, the Horizontal Position setting is not available.
Back Language Press to go back to the main menu. Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Japanese, Brazilian Portuguese, Simplified Chinese or Russian. Menu Transparency Allows you to adjust the OSD background from opaque to transparent.
OSD Warning Messages Factory Reset ResetsallOSDsettingstothefactorypresetvalues . Personalize User can select from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source" and set as shortcut key 1 and 2.
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1440x900 ( E1910 ) or 1680x1050 ( E2210 ).
If you do not see 1440x900 ( E1910 ) or 1680x1050 ( E2210 ) as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures: l If you have a Dell desktop or portable computer: ¡ Go to support.
Back to Contents Page Setting Up Your Monitor Dell™ E1910/E2210 Flat Panel Monitor Setting the display resolution to 1440x900 (E1910 Maximum) or 1680x1050 (E2210 Maximum) For optimal display perf.
Dell™ E1910/E2210 FlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserve Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ E1910/E2210 Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Removing the Stand Attaching the Stand To attach the monitor stand: 1.
Connecting the white DVI cable Connecting the blue VGA cable Organizing Your Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot NOTE: The Graphics are used for the purpose of illustration only.
toorganizeallcablesasshownabove. Attaching the Soundbar(optional) To attach the Soundbar: Removing the Stand To remove the stand: 1. Rotate the stand to allow access to the stand release button. 2. P ress and hold the stand release button.
(Screw dimension: M4 x 10mm). Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk - mounted to a wall - mounted display, do the following: 1. Verify that the power button is turned Off, then disconnect the power cord.
Back to Contents Page Troubleshooting Dell™ E1910/E2210 Flat Panel Monitor Self - Test Common Problems Product Specific Problems Dell Soundbar Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds.
Product Specific Problems Dell™Soundbar Problems Horizontal/Vertical Lines Screen has one or more lines l Reset the monitor to Factory Settings. l Perform Auto Adjust via OSD. l Adjust Phase and Pixel Clock controls via OSD. l Perform monitor self - test feature check and determine if these lines are also in self - test mode.
Back to Contents Page l Avoid using an audio cable extension or audio jack converter. Distorted Sound Other audio source is used l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line - in plug is completely inserted into the jack of the audio source.
Ein wichtiger Punkt beim Kauf des Geräts Dell E2210C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell E2210C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell E2210C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell E2210C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell E2210C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell E2210C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell E2210C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell E2210C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell E2210C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
