Benutzeranleitung / Produktwartung E2209W des Produzenten Dell
Zur Seite of 29
Dell™ E2009W/E2209W Flat Panel Monitor User's Guide About Your Monitor Setting Up the Monitor Operating the Monitor Troubleshooting Appendix Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer.
Back to Contents Page About Your Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability Maintenance Guidelines Package Contents Your monitor ships with the components shown below.
Product Features The Dell™ E2009W/E2209W flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ E2009W: 20 - inch (508 mm) viewable area display. ■ E2209W: 22 - inch (558.
Back view Back View with monitor stand Label Description/Use 1 VESA mounting holes (100mm) (Behind attached VESA plate) U se to mount the monitor. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 3 Security lock slot Use a security lock with the slot to help secure your monitor.
Bottom view Label Description 1 AC power cord connector 2 Stand lock 3 DVI connector 4 VGA connector Monitor Specifications Flat Panel Specifications Model E2009W E2209W Screen type Active matrix - TF.
Video Supported Modes Model E2009W / E2209W Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Support HDCP) Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.
Depth 6.24 inches (158.5 mm) 6.44 inches (163.7 mm) Weight Weight with packaging 14.15 lbs (6.42 kg) 16.76 lbs (7.62 kg) Weight with stand assembly and cables 10.80 lbs (4.90 kg) 13.16 lbs (5.98 kg) Weight without stand assembly (For wall mount or VESA mount considerations - no cables) 8.
Pin Number 15 - pin Side of the Connected Signal Cable 1 Video -Red 2 Video -Green 3 Video -Blue 4 GND 5 Self- test 6 GND -R 7 GND -G 8 GND -B 9 Computer 5V/3.
16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock - Plug and Play Capability You can install the monitor in any Plug and Play-compatible system.
Back to Contents Page Setting Up the Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached from monitor when they are shipped from the factory.
Connecting the Blue VGA Cable CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above.
NOTICE: Do not use with any device other than Dell Soundbar. 1. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Dell Soundbar to the left until it snaps into place.
1 . P ress and hold the stand release button. 2 . Lift the stand up and away from the monitor . Wall Mounting (Optional) (Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1 . Place the monitor panel on soft cloth or cushion on stable flat table.
Back to Contents Page Operating the Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Setting the Optimal Resol.
D OK / Input Source Select Use this button to select the input source or select an OSD menu option. Use the Input source button to select one of the two different video signals that may be connected t.
or Main Menu for Digital (DVI - D) Input NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector. 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
Submenus BRIGHTNESS & CONTRAST Use this menu to activate Brightness/Contrast adjustment. Back Push to go back to the main menu. Brightness Brightness adjusts the luminance of the backlight. Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100).
AUTO ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. NOTE: In most cases, Auto Adjust produces the best image for your configuration. NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
Back Push to go back to the main menu. Input Color Format Allows you to set the video input mode to. RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. YPbPr : Select this option if the your DVD player supports only YPbPr output.
NOTE: Hue adjustment is available only for video input. Saturation T his feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'.
Push to go back to the main menu. Horizontal Position Use the and buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+). NOTE: When using a DVI source, the Horizontal Position setting is not available. Vertical Position Use the and buttons to adjust image up and down.
NOTE: For best user experience and optimum performance of your monitor, keep this feature enabled. LCD Conditioning This feature will help reduce minor cases of image retention. If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention.
Activate the computer and wake up the monitor to gain access to the OSD If either VGA or DVI - D input is selected and both VGA and DVI - D cables are not connected, a floating dialog box as shown below appears.
If you do not see 1680 x 1050 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures: If you have a Dell desktop or portable computer: Go to support.dell.com , enter your service tag, and download the latest driver for your graphics card.
You can tilt the monitor to best fit your viewing needs. Back to Contents Page.
Back to Contents Page Troubleshooting Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Troubleshooting Your Monitor Common Problems Product Specific Problems CAUTION: Before you begin any of.
Verify that the power outlet is functioning properly by using any other electrical equipment. Ensure that the power button is depressed fully. No Video/ Power LED on No picture or no brightness Increase brightness & contrast controls via OSD. Perform monitor self- test feature check.
Specific Symptoms What You Experience Possible Solutions Screen image is too small Image is centered on screen, but does not fill entire viewing area Check the Scaling Ratio setting in Image Setting OSD.
Back to Contents Page Appendix Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety In.
Ein wichtiger Punkt beim Kauf des Geräts Dell E2209W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell E2209W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell E2209W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell E2209W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell E2209W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell E2209W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell E2209W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell E2209W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell E2209W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
