Benutzeranleitung / Produktwartung E198FP des Produzenten Dell
Zur Seite of 35
Dell™E198FPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
Back to Contents Page AboutYourMonitor Dell™E198FPFlatPanelMonitor Front View Back View Side View Bottom View Monitor Specificati.
Side View Rightside 1 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
Left s.
Vertical 301.1 mm (11.8 inches) Pixel pitch 0.294 mm Viewing angle 160 ¢ X (Vertical) typical, 160 ¢ X (Horizontal) typical Luminance output 300 cd/m ² ( typ) Contrast ratio 800:1 (typ) Faceplate c.
Power Management Modes If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings.
Back to Contents Page Appendix Dell™E198FPFlatPanelMonitor Safety Instructions FCC Notice (U.S. Only) ContactingDell™ CAUTION: Safety Instructions Read a.
FCC Class B This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception.
International Access Code: 00 Country Code: 54 City Code: 11 Portables E- mail for Servers and EMC ® Storage Products la - techsupport@dell.
Bolivia Online Support www.dell.com/bo la - techsupport@dell.com Technical Support, Customer Service, Sales toll - free:800 - 10 - 0238 Brazil International Access Code: 00 Country Code: 55 City Code: 51 Online Support www.
Technical Support – Projectors, PDAs, Switches, Routers, etc. toll - free:8008582920 Technical Support – Printers toll - free:8008582311 Customer Servic.
Technical Support, Customer Service, Sales 1- 800 - 156 - 1588 Ecuador Online Support www.dell.com/ec la - techsupport@dell.
Grenada Online Support www.dell.com/gd la - techsupport@dell.com Technical Support, Customer Service, Sales toll - free:1 - 866 - 540 - 3355 Guatemala OnlineSupport www.
City Code: 1 Home computers 1850 543 543 AtHomeSupport 1850200889 Sales Home 1850 333 200 Small Business 1850 664 656 Medium Business 1850 200 646 Large Business 1850 200 646 Sales E - mail Dell_IRL_Outlet@dell.
Faxbox Service 044 - 556 - 3490 24 - Hour Automated Order Status Service 044 - 556 - 3801 Customer Service 044 - 556 - 4240 Business Sales Division - up to 400 employees .
Main 50 - 81 - 8800 or 001 - 800 - 888 - 3355 or001 - 866 - 851 - 1754 Montserrat Online Support la - techsupport@dell.com Technical Support, Customer Service, Sales toll - free:1 - 866 - 278 - 6822 Netherlands Antilles Online Support la - techsupport@dell.
Country Code: 351 Sales 800300410or800300411or 800300412or214220710 Fax 214240112 Puerto Rico Online Support www.
Fax 902118539 Corporate Technical Support 902100130 Customer Service 902115236 Switchboard 917229200 Fax.
International Access Code: 00 Country Code: 44 City Code: 1344 dell_direct_support@dell.com Customer Service Online support.
Back to Contents Page Financial Services www.dellfinancialservices.com Leases and Loans toll - free: 1 - 877 - 577 - 3355 Dell Preferred Accounts (DPA) toll - free: 1 - 800 - 283 - 2210 Sales 1- 8.
Back to Contents Page Setting Up Your Monitor Dell™E198FPFlatPanelMonitor Connecting Your Monitor Using the Front Panel Buttons Using the OSD Using the Dell Soundbar (Optional) Connecting Your Monitor 1.
On Screen Menu/Display (OSD) Direct - Access Functions A MENU The 'MENU' button is used to open the on - screen display (OSD), select function icons, exit from menus and sub - menus, and to exit the OSD. See Accessing the Menu System.
Using the OSD Accessing the Menu System 1. With the menu off, push the MENU button to open the OSD system and display the main features menu. 2. Push the - and + buttons to move between the function icons.
Auto Adjust Even though your computer system can recognize your new flat panel monitor on startup, the 'Auto Adjustment' function will optimize the display settings for use with your particular setup.
Vertical Position - and + buttons move OSD down and up. OSD Hold Time The OSD stays active for as long as it is in use. 'OSD Hold Time': Sets the length of time the OSD will remain active after the last time you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments youhavemade.IfyoumakeanadjustmentandthenwaitfortheOSDtodisappeartheadjustmentwillalsobesaved.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer. See Troubleshooting for more information.
1. Workingfromtherearofthemonitor,attachSoundbarbyaligningthetwoslotswiththetwotabsalongthebottomrearofthemonitor. 2. SlidetheSoundbartotheleftuntilitsnapsintotheplace.
Back to Contents Page Solving Problems Dell™E198FPFlatPanelMonitor Monitor Specific Troubleshooting Common Problems Product Specific Problems Monitor .
Product Specific Problems Shaky/Jittery Video Wavy picture or fine movement l Push Auto Adjust button l Adjust Phase and Clock controls via OSD l Perform monitor reset l Check environmental factor.
Back to Contents Page l The OSD Lock is On. Press the menu button for 15 seconds to unlock the OSD menu. The monitor will not go into power saving mode. No picture, the LED light is green. When press "+", "- " or "Menu" key, the message " No input signal " will appear.
Back to Contents Page Using Your Monitor Stand Dell™E198FPFlatPanelMonitor Attaching the Stand Organizing Your Cables Using the Tilt RemovingtheStand Attaching the Stand 1.
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable holder to neatly organize all cables as shown above. Using the Tilt With the built - in pedestal, you can tilt the monitor to best suit your viewing needs.
Back to Contents Page NOTE: TopreventscratchesontheLCDscreenwhileremovingthestand,ensurethatthemonitorisplacedonacleansurface.
Ein wichtiger Punkt beim Kauf des Geräts Dell E198FP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell E198FP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell E198FP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell E198FP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell E198FP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell E198FP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell E198FP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell E198FP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell E198FP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
