Benutzeranleitung / Produktwartung E177FP des Produzenten Dell
Zur Seite of 29
Dell™E177FPFlatPanelMonitorUser'sGuide Notes, Notices, and Cautions Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
Back to Contents Page About Your Monitor Dell™E177FPFlatPanelMonitorUser'sGuide Front View Back View Side View Bottom View Monitor Specifications Caring for your Monitor Fr.
Side View 1 Security lock slot - Attach a lock to secure your monitor. 2 Dell Soundbar mounting brackets - Attach the optional Dell Soundbar. 3 Barcode serial number label - Refer to this label if you need to contact Dell for technical support. 4 Regulatory rating label - List the regulatory approvals.
Right side Left side Bottom View 1 AC power cord connector 2 VGA connector.
Monitor Specifications General Model number E177FP Flat Panel Screen type Active matrix - TFT LCD Screen dimensions 17 inches (17 - inch diagonal viewable image size) Preset display area: Horizontal 337.9 mm (13.3 inches) Vertical 270.3 mm (10.6 inches) Pixel pitch 0.
Power Management Modes If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use.
Pin Assignments VGA Connector The following table shows pin assignments in the VGA connector: Plug and Play Capability You can install the monitor in any Plug and Play - compatible system.
Back to Contents Page Appendix Dell™E177FPFlatPanelMonitorUser'sGuide FCC Notice (U.S. Only) CAUTION: Safety Instruction Contacting Dell Your Monitor Set - up Guide Product Information Guide FCC Notice (U.
l Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway. l Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
Home/Small Business Support for all other Dell computers 0820 240 530 17 Preferred Accounts/Corporate Support 0820 240 530 17 Switchboard 0820 240 530 00 Bahamas Website: www.dell.com.bs E- mail: la - techsupport@dell.
Large Corporate Accounts Key Accounts toll - free: 800 858 2628 Large Corporate Accounts North toll - free: 800 858 2999 Large Corporate Accounts North Government and Education .
International Access Code: 00 Country Code: 49 City Code: 69 Technical Support for XPS 069 9792 - 7222 Technical Support for all other Dell computers 069 9792 - 7200 Ho.
Corporate Technical Support 02 577 826 90 Customer Care 02 577 825 55 Fax 02 575 035 30 Switchboard 02 577 821 Jamaica E- mail: la - techsupport@dell.
Main 50 - 81 - 8800 or 01 - 800 - 888 - 3355 Montserrat E- mail: la - techsupport@dell.com General Support toll - free: 1 - 866 - 278 - 6822 Netherlands Antilles E- mail: la - techsupport@dell.
Transaction Sales toll - free: 1 800 394 7412 Corporate Sales toll - free: 1 800 394 7419 Slovakia (Prague) International Access Code: 00 Country Code: 421 Website: support.euro.dell.com E- mail: czech_dell@dell.
Your Monitor Set - up Guide To view PDF files (files with an extension of .pdf ), click the document title. To save PDF files (files with an extension of .
Back to Contents Page.
Back to Contents Page Using the OSD Dell™E177FPFlatPanelMonitorUser'sGuide Connecting Your Monitor Using the Front Panel Buttons Using the OSD UsingtheDell™Soundbar(Optional) Connecting Your Monitor 1. Turn off your computer and unplug its power cable.
On Screen Menu/Display (OSD) Direct - Access Functions Using the OSD Accessing the Menu System 1. With the menu off, press the 'MENU' button to open the OSD system and display the main features menu. Brightness/Contrast Hot Key B C - and + buttons Use these buttons to adjust (decrease/increase ranges) items in the OSD.
2. Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the function or group of functions (sub - menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock 'adjustment and then use 'Phase' again. NOTE:Thisfunctionmaychangethewidthofthedisplayimage.
Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu, or exit the OSD, the monitor automatically saves any adjustments you have made. If you make an adjustment and then wait for the OSD to disappear the adjustment will also be saved.
OSD Warning Messages A warning message may appear on the screen indicating that the monitor is out of sync. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use.
Soundbar Attachment to the Monitor Back to Contents Page 2. Power indicator 3. Power/Volume control 1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Soundbar to the left until it snaps into place.
Back to Contents Page Product Specific Problems Dell™E177FPFlatPanelMonitorUser'sGuide Monitor Specific Troubleshooting Common Problems Product Specific .
Product Specific Problems l Adjust Phase and Clock controls through OSD l Perform monitor reset l Check environmental factors l Relocate and test in another room Missing Pixels LCD screen has spots l .
Back to Contents Page signal " will appear. No Input Signal when user controls pressed No picture, the LED light is green. When press "+", " - " or "Menu" key, the message " No input signal " will appear.
Back to Contents Page Using Your Monitor Stand DellT E177FP Flat Panel Monitor User's Guide Attaching the Stand Organizing Your Cables Using the Tilt Removing the Stand Attaching the Stand 1. Place the stand on a flat surface. 2. Fit the groove on the back of the monitor onto the two teeth of the upper stand.
Tilt With the built - in pedestal, you can tilt the monitor for the most comfortable viewing angle. Removing the Stand After placing the monitor panel on a soft cloth or cushion, press and hold the LCD removal button, and then remove the stand.
Ein wichtiger Punkt beim Kauf des Geräts Dell E177FP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell E177FP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell E177FP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell E177FP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell E177FP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell E177FP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell E177FP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell E177FP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell E177FP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
